No internet connection detected error and Login errors
I'm on Sony Xperia SP and I have run into two problems lately, one being that Spotify says I have no internet connection (no internet connection detected error) and I've recently bought premium so I'm wasting my money because of this. I've tried clean reinstall and it still failed, this now brings me to my second problem. I also get long waits while waiting to log in and a lot of the time it never logs in, I've only logged out to first the first error and it just creates more problems. I've tried both Facebook and regular logins and none have worked. I know a lot of the community has either previously or is currently receiving this problem so a update fix would be great!
P.S. Login for my ps4 and PC work fine so it's a problem with the app itself.
Just a correction, I believe the error was actually no internet connection available but because I can't even login I'm not sure!
Similar Messages
-
I have installed Adobe digital additions and have tried to authorize but keep getting error message "Connection error" . The internet connection is working and I do have an Adobe ID can you help please.
I have been using Adobe reader for PC to download my eBooks but the eBook Vendor has switch to Digital Addition,this is from sjpt,
Try completely removing any authorization using ctrl-shift-D to ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your Adobe ID. -
Error -6753 Make sure your internet connection is valid and try again. Help
So I just dropped nearly $200 on an airport extreme to throw my desktop PC and wireless mac into a network (since my router just gave out). I had a hard time connecting to the internet, and then magically I got the internet working, but when I open airport utility to configure security settings or update firmware I get:
"An error occurred while trying to access the base station. Make sure your internet connection is valid and try again. Error -6753"
How do I get rid of this? Any suggestionsError -4 is almost always an indication that the connection between the AirPort Utility application and the AirPort router is is being blocked by....
1) The Windows Firewall
2) Microsoft Security Essentials...if installed on your PC
3) The anti-virus software
4) 1&2, or 2&3, or 1&3, or all of the above
When I used to use a PC, the only way that I could ever get the AirPort setup was to turn off all of the items above, configure the AirPort, then turn everything back on again.
Life would be tons easier if you had an iPhone or iPad to configure the AirPort Extreme, or you could borrow a Mac for a few minutes. -
Itunes could not connect to iphone and unknow error occured
why does my itunes not connect to my iphone everytime i plug in my phone to my laptop this message always comes up "itunes could not connect to iphone and unkown error occured"
I've had the same issue for a week now. Just tried to sync on my home iMac (week long problem at work on MacBook Pro, but trying a clean install at home didn't change things).
-
CRC errors and input errors on Te 1/2 of Cisco WS-C3560X-48 switch
Hi All,
I am observing CRC errors and input errors on one of the Te1/2 interface of WS-C3560X-48 Cisco switch. I have not observed any CRC errors or input errors on the connected interface at other end. Can you please let us know whether the issue is with cable or SFP module.
Effected interface:
TenGigabitEthernet1/2 is up, line protocol is up (connected)
Hardware is Ten Gigabit Ethernet, address is f866.f243.e6b6 (bia f866.f243.e6b6)
Description: *** MAN-SW1B***
MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec,
reliability 254/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not set
Full-duplex, 10Gb/s, link type is auto, media type is SFP-10GBase-SR
input flow-control is off, output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters 3w5d
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 29000 bits/sec, 30 packets/sec
5 minute output rate 45000 bits/sec, 37 packets/sec
68905128 packets input, 8272036576 bytes, 0 no buffer
Received 68904979 broadcasts (68812046 multicasts)
0 runts, 0 giants, 0 throttles
146170 input errors, 130065 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 68812046 multicast, 0 pause input
0 input packets with dribble condition detected
83524620 packets output, 12642123488 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 PAUSE output
0 output buffer failures, 0 output buffers swapped out
Other end.
TenGigabitEthernet1/4 is up, line protocol is up (connected)
Hardware is Ten Gigabit Ethernet Port, address is 503d.e53b.9703 (bia 503d.e53 b.9703)
Description: *** DMZ-SW1B ***
MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 10Gb/s, link type is auto, media type is 10GBase-SR
input flow-control is on, output flow-control is off
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 32000 bits/sec, 27 packets/sec
5 minute output rate 21000 bits/sec, 22 packets/sec
918379921 packets input, 312586470396 bytes, 0 no buffer
Received 881142868 broadcasts (875016400 multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 input packets with dribble condition detected
463132111 packets output, 240865283601 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped outWhen there are more than two members in a cluster (stack), the Gigabit interface operates at half-duplex. Since collisions can result at half-duplex, some CRCs errors are normal.
-
I have a mac but am experiencing the same prompt? "iTunes could not contact the iPod software update server because you are not connected to the Internet. Make sure your Internet connection is active and try again."
Hey ksgrech,
I found the following information which may be of assistance in troubleshooting this error on a Mac:
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
Furthermore, you may want to refer to this article (error 3194):
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Cheers!,
Matt M. -
Installing the latest update on my iPad - error message saying the iPad couldn't synchronize because of an internal error, and then - error message (OxE8004017) when trying to save, and then (2003) when trying to restore - nothing works anymore - On my iPad the only thing I see is a connector cord to iTunes and nothing else.
What can I do ???Same issue for me, recently I started having issues with apps no longer being able to access my Facebook account. But the iPad Facebook account settings will not accept my password, even though the Facebook app and Safari can access my account fine. The only significant events I recall that have occurred that may have triggered this have been that via my Facebook account I killed off a lot of so called authorised connections and I changed my user name, but still have the same email address and password.
I have tried just about every solution put forward on the net, short of a factory restore, back to new, on my iPad.
I have also; deleted my iCloud account, deleted the Facebook app and account, deleted Safari data.
One would think that after I have deleted my account from the iPad that it would ask for both username/email address and password, but it only asks for password, so the username is still stored somewhere that I am unable to delete.
I also see that no one seems to have been able to get an answer from Apple. So I'm guessing they have absolutely no idea themselves.
I am hesitant to put my username on Facebook back to what it was as Facebook only give you a few chances to change your username, then you are locked.
I have iOS 7.1.1 installed.
I did have a lot of respect for Apple and their devices as they just worked, but they are becoming tarnished by ignoring what seems to be a growing issue. -
CRC Error and input Error how can fix these
FastEthernet0/13 is up, line protocol is up
Hardware is Fast Ethernet, address is 0004.4d27.66cd (bia 0004.4d27.66cd)
Description: EDL-P-Box-NO-4
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
reliability 250/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not set
Auto-duplex (Full), Auto Speed (100), 100BaseTX/FX
ARP type: ARPA, ARP Timeout 04:00:00
Last input 18:52:43, output 00:00:01, output hang never
Last clearing of "show interface" counters never
Queueing strategy: fifo
Output queue 0/40, 0 drops; input queue 0/75, 0 drops
5 minute input rate 12000 bits/sec, 6 packets/sec
5 minute output rate 24000 bits/sec, 6 packets/sec
14488019 packets input, 2783320210 bytes
Received 345346 broadcasts, 0 runts, 0 giants, 0 throttles
261028 input errors, 259429 CRC, 1599 frame, 0 overrun, 0 ignored
0 watchdog, 84207 multicast
0 input packets with dribble condition detected
19658279 packets output, 3529106068 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
PAD-8-1-10.179#cle
vHi,
Check out the below explanation for CRC error and farme error and few useful links to trouble shoot these type of problems
The CRC error rate is 1.75915% (greater than 1 in a million packets),
and the collision rate is less than 0.1%.
This can indicate excessive noise or transmission problems on the LAN or the LAN
bus itself. A high number of CRCs is usually the result of collisions or a station
transmitting bad data.
TRY THIS: Check cables to determine whether any are damaged. If 100BaseTX is being
used, ensure Category 5 cabling is being used and not another type, such as Category
3.
There have been 1599 'frame errors' reported.
This indicates the number of packets received incorrectly, having a CRC error
and a non-integer number of octets. On a LAN, this is usually the result of collisions
or a malfunctioning Ethernet device.
TRY THIS: Monitor the level of frame errors over time. If they are increasing,
try swapping interfaces and or ports to identify the problem.
http://www.cisco.com/en/US/customer/products/hw/modules/ps2033/products_tech_note09186a008009446d.shtml
http://www.cisco.com/en/US/docs/internetworking/troubleshooting/guide/tr1904.html
http://www.cisco.com/en/US/docs/internetworking/troubleshooting/guide/tr1904.html
Hope that helps out your query !!
Regards
Ganesh.H -
Wifi bars on but browser says no internet connection detected
I am on my school network and although when I log on, I get all bars on the wifi icon blacked in, my browsers all say that there is no internet connection detected. What should I do?
There my be an Acceptable Use Policy that you have to accept before using the network. Turn off your wifi, then turn it back on and reconnect. Then open your default web browser, to see if anything pops up.
-
iTunes RADIO is not working.
“iTunes could not connect to the iTunes Store. Make sure your internet connection is active and try again.” Try as I may, as many as ten attempts, trying to connect after restart, after shutdown, nothing works. Just so …
iTunes STORE not “connectable” with my otherwise perfectly-working internet connection, viable, up and running for all other uses.
Simply put, firstly, I can't connect to the internet when I click on Radio. People are quite suspicious that this is Apple incompetence or your company's famous arrogance for this commonly-suffered problem that you won't or “can’t” fix.
Read the many web comments and you won’t be pleased with yourselves: the suspicion is that if you ruin internet radio on iTunes, Apple will somehow make more money on music downloads, etc. Bull.
Also, thirdly, my old playlist of 20 or so internet radio stations in the Ambient category STILL PLAYS !
Then fourth, I installed the latest available version of QuickTime Player 7.app Version 7.6.6 but it didn’t solve the problem either. I had QuickTime Player.app Version 10.2, but substituted what Apple website said was the latest, LOWER NUMBERED QuickTime Player version of 7.6.6
Fifth, I can't connect to iTunes store no matter what I do or what user group's advice I try. So I can’t buy or download anything from iTunes. Bad for business.
Sixth, I updated to the latest version of iTunes but this weird problem remains. All suggested Apple fixes or user group fixes are useless. Where is Apple’s famous technical competency, vaunted customer support?, and user-friendly product reputation? Get it back, please.
Solve this problem of yours ASAP for us, your numerous disgruntled, dissatisfied customers of iTunes. You can do better, should, and really –in all fairness- must.
===============================================================
NOTE: no password for iTunes exists in my Keychain. Is this a problem?
Apple ACCOUNT ID, and iTunes ID password, works but not to access iTunes with my healthy internet connection.
Apple store id It works via direct internet connetion but not through iTunes. Very strange.
===============================================================
FYI, Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro8,2
Processor Name: Intel Core i7
Processor Speed: 2 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 16 GB
Boot ROM Version: MBP81.0047.B27
SMC Version (system): 1.69f4
Serial Number (system): C0*******F8V
Sudden Motion Sensor:
State: Disabled
Intel 6 Series Chipset:
Vendor: Intel
Product: 6 Series Chipset
Link Speed: 6 Gigabit
Negotiated Link Speed: 6 Gigabit
Description: AHCI Version 1.30 Supported
M4-CT512M4SSD2:
Capacity: 512.11 GB (512,110,190,592 bytes)
Model: M4-CT512M4SSD2
Revision: 040H
Serial Number: 0000000012330912E75A
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Solid State
TRIM Support: Yes
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
disk0s2:
Capacity: 511.25 GB (511,250,432,000 bytes)
BSD Name: disk0s2
Content: Apple_CoreStorage
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk0s3
Content: Apple_Boot
Volume UUID: 600737FB-7A29-3BAE-859E-CBFE2E90C39A
<Edited by Host>This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
I live in Europe ,So Be persistent and don't give up ! Aug. 2013 -
I cannot get my iMac with built-in airport wi-fi to allow internet connections to Nook and PS3. The devices access the network, but internet connection fails. Internet sharing is enabled, network security (WEP, WPA) is disabled. What to check next?
On an additional note, I've purchased a wireless router and everything connected on the first attempt. It just vexes me that the built-in wireless isn't working as a router. Is this another example of "Mac only plays with Mac"?
-
My Windows PC iTunes doesn't see my two Apple TV2's (in the speaker button in lower right of iTunes), I believe this problem began when my PC's McAfee AV subscription expired. My computer has internet connection thru router and my ATVs have internet connection thru same router so it's not a networking issue. My iPad can see the ATVs but it can't see iTunes so the problem appears to be PC/iTunes related. I turned the PC's firewall off but no joy. I uninstalled the expired McAfee and still no joy. Reboot = no joy. Glass of scotch = no joy. Need help!!
Wanted to add that I turned on Home Sharing w/the same account in iTunes and ATVs. And I've successfully streamed music/photos to my ATVs for over a year.
-
I can not connect to iswifter, some times it is connected and some time it is not connected and getting message " UNABLE TO CONNECT TO SERVER , CHECK YOUR INTERNET" but my internet connection is ok and I can open other web site with out any problem. Please guide me how to solve this issue.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers, Tom -
How do I turn off my internet connection via 3G and be connected only to Wifi and vise vera? Iphone 4s
Kappy wrote:
The menubar for the Finder and your Desktop along with the date, time, and Spotlight icons. Looks like this:
If it isn't present then open Network preferences, select the Airport port, check the box labeled: "Show Wi-Fi status in menubar." You can also turn Airport off in this same place.
This is the iPhone forums -
When I'm downloading iOS for my iPhone just for a minute my internet connection was gone and the whole download was deleted and when I resumed it started from the beginning?
Delete and re-download the Dropbox app. You will have to sign in again and adjust app settings.
Maybe you are looking for
-
Not able to import Attribute Text Values in Taxonomy table
Hi Experts, I have an excel file with 54K records of Attribute text values need to import in to taxonomy table. my excel file has 3 fields like ID, Name, Text Values. While mapping the fields in feild mapping grid, I have mapped ID field with Attribu
-
Download and Upload Data from Table Control
Is there any FM other than WS_download to copy the contents of TC into an Excel Sheet and vica-versa. Regards, Ahasan
-
Hi, I have booked the payment in MIRO. The payment term updated in accounting document generated after MIRO is PT1. This is as per the payment term in PO. After this, I changed the payment term in document to PT2. After this, I executed the payment r
-
Can't read photos after reinstalling operating system to iOS8 on iPhone4
I upgraded my OS to iOS8 on my iPhone4 and since then cannot read new photos as I try to copy images to my PC. Prior to that each time I took a new photo set with my iPhone it would create a new folder in DCIM (or added to the latest), so it was pret
-
Weblogic Installation gets managed server of old installation
Hi. In my CentOS I had a weblogic 10.3.3.0 with three managed servers, then I unistalled it, delete the folder of installation manually for the files that the uninstaller didn't erase and then I installed again weblogic (jdevstudio11113install.bin) w