No internet connection / Doesn't accept PIN code on reboot

Good morning. I own a brand-new (bought last week) Z1 compact running on Android 4.4.2. Until yesterday evening everything was fine. Then I connected it to the recharging station, to find this morning that the internet connection was lost. As I didn't find any mistake in the settings, and from PC experiences, I shut down and restarted the phone. On reboot it asked for the PIN code. I keyed in the code given to me by the vendor (Deutsche Telekom) and which I hadn't changed. The phone replied that the code was wrong and allowed me only two more tries. Before doing this I guessed it might be better to ask the experts. I am sure that no one manipulated the phone last night. So what should I do, can you please help me? I'm a bit at a loss. Thank you in advance.

In these situations the only thing you can do is perform a system repair which will factory reset your device and also means that any and all data will be erased - Use either PCC or SUS found here - For PCC unplug your phone from the Pc and fully switch it off - Start PCC select Support zone then Update my phone/tablet then in Blue select Repair my phone/tablet and follow the instructions - Remember that when prompted hold volume down and connect your USB cable - Your phone should be switched off - In some circumstances you may need to perform this twice as the 1st time will install the Flash driver
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Similar Messages

Airport loses internet connection more often now. Have to reboot. Its about 3-4 years old now. Is there something I can do?

Airport loses internet connection more often now. Have to reboot. Its about 3-4 years old now. Is there something I can do?

If your problem is due to interference, you might be able to improve things by changing the channel. An AirPort base station that old is probably an 802.11b/g model, which suggests that the best choices for channel are 1, 6, and 11.

After upgrading to Lion my internet connection doesn't work

Hey folks,
     MacPro 2010, wired connection through Verizon FiOS, upgraded to Lion (via App Store) back in July, but now my wife says she can't get on the Interent
on her account, even though all connections are good, she has an IP, subnet, DNS are good, the ethernet settings say she is connected, but using Chrome (13.0.782.122) or Safari, just hangs on browser launch. No URL will resolve no matter what site I enter. But when I log out of her account and into mine I can connect using the same Chrome browser just fine.
     The only thing I can come up with is Chrome has had issues for quite some time on Snow Leopard and Lion when trying to update. About Chrome will display there is a new version and hitting the Install button will result in a "Update Server not available Error Code: 12". Any workaround by the Chrome Blog was not helpful, and uninstalling and reinstalling the program would sometimes work. But every so often when I would manually check About Chrome it would mysteriously be updated all by itself, and I was fine. Eventually though, every so often I would check and it would say there's a new version and I would get the infamous error. I could never seem to update the program myself. I would have to wait until it did it on its own?
I don't know if fooling around with Chrome's insides (using AppTrap to get rid of Chrome, manually deleting Preferences.js files, etc) corrupted something on my wifes account, which is a limited account and had some Parental Controls enabled - although she had Allow Unrestricted Access to Internet Sites checked off. I DID, however, have the Apps section restricted at some level, and I believe certain Chrome features were blocked ( like google updater), because while logged into her account, chrome would pop up: "you don't have access to GoogleUpdater...etc" and another one named   "xml or xmd" something or other, I can't remember exactly so I apologize. But while troubleshooting the no internet issue, I hit "Always Allow" for both messages, put in my password and she still couldn't get on the web, even when I turned off Parental Controls altogether. I couldn't even do a Software Update, it would just not move.
I even opened a Terminal window and Pinged www.google.com and was receiving replys at a steady rate, so I don't know what else to try. Safari is also exhibiting this same behavior, so I'm thinking its a common issue with both browsers since both use Webkit? I could be wrong obviously...
I'm at a loss as to what it could be or what to test out. Any help would be welcomed.
Philip

I had this problem on SL and on Lion as well, and it occures for WiFi and Ethernet connections.
In fact the internet connection was not broken as I could ping the destination usin the IP (not DNS name).
In this case the problem was related to mDNSResponder task which handles all dns queries.
It was the most frequent problem in my day to day work with SL and now Lion. It was never fixed by any patch from Apple. I tried almost all voodoo including fresh install, all possible config changes - no solution.
The only version with no problems related to network was 10.5.8. All the other versions had issues of different kind (WiFi instability (lost signal), DNS problems (for wireless and wired connection) sometimes associated with machine sleep and wake up and sometimes with no reason.
QUESTION: Is your problem independent of the access point / router you connect to.
I must say networking was (and still is) the weakest part, besides the other OS X weaknesses I experienced during 4 years of OS X usage.
No problems in the same network with Linux or Windows beeing ran natively on my iMac So hardware is OK.
Software is of poor quality. Not much more to say in this matter.
I found a very interesting article dated 1996 about programming which I think is still valid.
Link to the article: http://www.fastcompany.com/magazine/06/writestuff.html
Below the fragment (with some connection to Apple)
Software is everything. It also s***s.
"It's like pre-Sumerian civilization," says Brad Cox, who wrote the software for Steve Jobs NeXT computer and is a professor at George Mason University. "The way we build software is in the hunter-gatherer stage."

Internet Connect doesn't like me...

Hi. Normally I can figure out what's wrong with my computer on my own, but this time I've been thrown for a loop and I need help. And I apologize in advance for the lack of useful information about my computer. :/
I've got a G4, tower of some sort, blue and silver (not the bright blue, the darker grey-blue)... Anyway. I just upgraded from 10.2.8 to 10.3.??? last week, and Internet Connect won't work. There's a possibility it's the same problem I was having with it before the upgrade, but I wasn't able to fix it then, either, so I suppose it doesn't matter. Anyway.
I use my cellphone to connect to the internet. At least, I'd like to. It works on my roommate's XP laptop just fine, but I've never gotten it to work on my computer. Various phones, I have modem scripts for all of them. I use Bluetooth to connect. I'm fairly sure I have the correct login information. (*99# i think, can't remember. t-mobile, anyway) The modem will pick up and dial, will say "connecting" for about thirty seconds, then will say "disconnecting" until I decide to restart the computer to make it stop saying that. The error log doesn't give me any really useful information on why it's disconnecting, as far as I can remember. It just kind of dies, I guess.
Any thoughts? And again, I apologize for lack of useful information. :/

are you connected for the 30 seconds or not at all?
i had similar issue when i recently installed an airport extreme. i had to check to see what the default setting for internet connect was and that it didnt automatically try to connect using the default (previosuly i wasnt wireless so it was looking for the ethernet cable). needless to say, it created havoc because i thought everything was connected correctly - and it was - but i had failed to remove the auto connection via PPPoE.
check your internet connect to see if your machine is still trying to connect via alternate means IN ADDITION TO your bluetooth.

My new internet connection doesn't work on my mac

I have an early 2008 Mac Book Pro 15inch and I just changed my internet provider. Now some websites don't charge or it takes them forever to do it. Some charge just fine. The internet connection is working great because I used it also on my iPod, iPhone and a PC laptop. I have a Mac OS X v10.5.8 and my Safari version is 5.0.6 (5533.22.3). I don't know what it is. I mean I can connect to the wi-fi signal but it doesn't work like it should. I still have the old internet connection for a few more days, and when I use it it works just fine like it should. Please help me if you have any ideas on how to fxs this problem. Thanks!!

I have a Mac OS X v10.5.8 and my Safari version is 5.0.6 (5533.22.3).
Your operating system version and Safari are severly outdated and possibly compromised by the Flashback botnet.
It might be your new ISP see's it and is blocking your machine in order to get you to fix your problem.
I suggest you get offline, then backup your users files manually to a external drive (emergency quick copy method)
Most commonly used backup methods
then take your machine (and all your disks and software) to a local PC/Mac specialist and have them upgrade your machine with a fresh install of 10.5 + programs (including iLife) then upgrade to 10.6.8. Snow Leopard.
They wil have to order a disk overnight, but after that it should be done.
Also max the RAM, upgrade the hard drive to 7,200 (no hybrids or SSDs) and have them check behind your fans for dustbunnies. Clean the machine.
Do not go to 10.7 or 10.8 on that machine, it's too old and at it's end of life stage, also you don't want to spend more money having to replace nearly all your software that 10.7-10.8 requires.
That machine is five years old, it's about to die, unless you haven't been using it much. but you can likely can get another 2 more years out of it with the steps I mentioned.
Later you can use the new internal drive for backup on a new machine if and when it does die. (it might not!)
If you take the machine to Apple, then they are going to hobble it with 10.7 or 10.8 and not install 10.6, also charge you a fortune for a new drive and RAM, that your just going to get a new machine instead.
When you get 10.6 installed, install Firefox web browser as it gets updates and much faster, Apple did not release Safari 6 for 10.6

I've update iOS devices to 8.0 and now need to update xCode, but keep getting "unknown error -50" leaving me with a non-working internet connection - the only fix seems to be reboot of both iMac and router - any ideas?

Having updated all my iOS devices to iOS 8.0 I now need to update xCode to match. I've tried several times, and on each occasion have received an "unknown error -50" message after getting about 500Mb. After this my internet connection appears to be fully occupied, and the only fix appears to be a reboot of both the iMac (2.5GHx Core i5, 4Gb RAMm OS X 10.9.5) and the router (Netgear DG834 v5, firmware 1.6.01.34) At first I thought that the error had not stopped the download, but after waiting for 30 minutes the connection was still unresponsive, though traffic was indicated as passing through but the router status page, and no additional content had been added to the download. Anyone else having a similar problem and different ideas as to fixing it?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Internet Connection doesn't work after windows update.

Hi everyone,
my boyfriend recently updated his laptop.
After the update his computer wouldn't work anymore. I went on the web and read some topics on the forums. And even tried some of them already.
I don't have Norton or Mcfee security software.
Operating system is Windows 7 and it's a 64-bitssystem.
I tried disabling ipv6 but that doesn't help. When i open the cmd and type ipconfig/all i get an overview of several adapters.
DHCP is enabled for everything but Tunnel-adapter for LAN-connection * 3: (sorry translating from dutch).
Also IP-routering and WINS-proxy are disabled.
Also i checked the recent updates. But for some reason the failing ones aren't amongst them.
Can someone pls help? Im wellknown with OS and can try to work with anything u name.
Thanks in Advance!
Nilu

Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
Restart the computer.

Phone doesn't accept SMS Code for phone number ver...

I've tried to get a Skype support rep. to solve my problem with no positive results. I'm now turning to the skype Community for help.
W want to have my phone number appear on the person's phone that I call. Skype says you can do this by setting up Called ID. They will send you a verrification code by SMS message. The problem is I have SMS messaging turned off on my phone, so it does not accept SMS messages, so I cannot receive the Verification Code. Has anyone been able to get past this obsticle? Can they send me an email with the verification code?

Sorry NMGuy,
I cannot help, as I am in the same situation as you are, and am joining my voice to yours.
I don't get SMS on my Iphone, so I cannot receive and enter the code for the caller ID option.
Skype assumes that everybody uses SMS?, and it is very difficult to get in touch with their customer support!
Anybody has a workaround?

How can I get help with message "server does not support RFC 5746, see CVE-2009-3555" from error console. Have recently update Firefox and my Virgin Mobile internet connection doesn't work.

CVE-2009-3555

The message about CVE-2009-3555 is meant for webmasters to make them aware that they need to fix their servers and visitors like you can ignore that warning.
Firefox 3.6 versions can detect such a misconfiguration and displays a warning in the "Tools > Error Console".
* http://wiki.mozilla.org/Security:Renegotiation
* http://kb.mozillazine.org/Error_loading_websites

Internet connection after a time disconnects and must Reboot

With excellent signal indicated, I am able to connect to the Internet with Firefox or IE. Then after a short time, I get an Error Message indicating it can't connect to selected URL, e.g., Google.com. I then have to ReBoot. I am using Linksys Router WRT54GC (Compact).

hi , here is what you do....access the router using http://192.168.1.1 "admin" is the password....;go to the wirelsss section and select channel 11..save settings....then go to the advanced wireless section and reduce the beacon interval to 50 and reduce the RTS and fragmentation threshold by 40 each....
this will just increas the quality of your wireless signals....restart your PC and observe.

I have one iPhone 8GB. after making upgrade of iTunes and software of iPhone, it's impossible to use the iPhone. There's no service! doesn't acept the code PIN! it only make emergency calls and the image in the phone is to conect to iTunes.What can i do?

I have one iPhone 8GB. After making un upgrade of iTunes and software of iPhone, it's impossible to use it. There's no service! doesn't acept PIN code! it only makes emergency calls and the image in the iPhone is the sign to connect to iTunes. What can i do to solve it?

Where are you and where did you get the phone. This sounds like a classic symptom of someone who bought an iPhone that originated in the U.S. which was then hacked so it would run on a carrier network other than AT&T... Then, when updating the phone, it becare re-locked to AT&T.
If that's what happened, you now own a paperweight. AT&T will NOT unlock them for any reason.
If this isn't the case, please clarify where you are, what carrier you have and where you got the phone so we can begin troubleshooting.

Internet connection not working after computer wakes up from sleep. OSX Lion

After upgrading to Lion, I noticed that my internet connection doesn't work when I wake my computer from sleep. I have to turn off the WiFi connection, turn it back on and it will work. I guess this is a glitch that will be fixed later on. Just wanted to point it out. I don't know if someone else is having the same problem? I am not very happy with the upgrade to Lion, things seem to be slower, I've had several freezes requiring to reboot. I guess Lion needed a little more twicking before release. Not worth the $29.99 price tag.

I had this problem on SL and on Lion as well, and it occures for WiFi and Ethernet connections.
In fact the internet connection was not broken as I could ping the destination usin the IP (not DNS name).
In this case the problem was related to mDNSResponder task which handles all dns queries.
It was the most frequent problem in my day to day work with SL and now Lion. It was never fixed by any patch from Apple. I tried almost all voodoo including fresh install, all possible config changes - no solution.
The only version with no problems related to network was 10.5.8. All the other versions had issues of different kind (WiFi instability (lost signal), DNS problems (for wireless and wired connection) sometimes associated with machine sleep and wake up and sometimes with no reason.
QUESTION: Is your problem independent of the access point / router you connect to.
I must say networking was (and still is) the weakest part, besides the other OS X weaknesses I experienced during 4 years of OS X usage.
No problems in the same network with Linux or Windows beeing ran natively on my iMac So hardware is OK.
Software is of poor quality. Not much more to say in this matter.
I found a very interesting article dated 1996 about programming which I think is still valid.
Link to the article: http://www.fastcompany.com/magazine/06/writestuff.html
Below the fragment (with some connection to Apple)
Software is everything. It also s***s.
"It's like pre-Sumerian civilization," says Brad Cox, who wrote the software for Steve Jobs NeXT computer and is a professor at George Mason University. "The way we build software is in the hunter-gatherer stage."

Webcam = No internet connection

Hi,
I am having a problem with my "Creative Webcam Vista Plus." Whenever I try to use it on MSN Messenger my internet connection doesn't work anymore and it is really fustrating. It is ok just sat on monitor but when I use it my connection seems to go down. Can anyone help me with this situation? I would be most grateful.
I have:
- Windows XP Home Edition.
- USB Cable Modem.
Message Edited by Knuckles2525 on 12-29-2005 03:26 AM

GRMA wrote:
No Internet Connection Available: You are not connected to the Internet at this time. Please try again later.
I do not understand why I am getting the above error message. My WiFi is on. I even tried turning Bluetooth. My messages comes through but I cannot access the internet and I cannot access any of my applications.
Why would I be getting this error message if my WiFi is on?
Try this :
On the upper right of the screen tap the battery and then RESTART, most of the time with a problem like this, all the Playbook needs is a good restart
Using the Playbook and the Z10 and the Z30 and loving them
Martin

10.7.4 causing hangs and loss of internet connection

Since the update I have had applications hanging and crashing. Mostly Mail, iTunes, and Safari. What is more annoying however is when the computer is inactive for an hour or so, I lose internet connectivity and have to shut down and reboot in order to get it back. I am on a wired connection and sharing another wired connection through the second ethernet port. Has anyone had these issues? It seems like 10.7.4 really messed with my machine...

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Step 1
Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall or hang logs — they're very long and not helpful.

My brand new mac pro always had Internet connection issues at school. WHY is that? I see the school's Internet working perfectly fine on other PC's, but there is never a day where my mac doesn't have Internet connection issues at school. How do I fix it?

I got my mac pro in the middle of August. School started the week after. Internet was working perfectly fine at home. But at school, I never had a good connection. Sometimes on the good days I get a connection when I'm sitting at the exact spot in class I always sit at. It's ridiculous and it's frustrating. I invested my money into this laptop and I'm beginning to regret it. I thought it was the school's Internet, but I don't see Internet issues with other PC users. It's most frustrating on registration days and I'm trying to register for my classes before it gets taken, but again... Internet connection issues. It's random. Majority of the time, it doesn't work at all. I've done Network Diagnosis and turning WiFi off then turning it on again. I've done everything I could. I put my money on this laptop and it was a lot of money. I could have bought an 800 dollars laptop and I would have Internet connection anywhere on campus. So, I don't want to continue everyday to regret on buying this laptop every time I try to connect to the Internet at school or Starbucks or anywhere else. How do I fix this? What's the problem ?
At school, I heard this guy had a problem with Internet connections too and he owned a new mac book pro. He said something like Apple messed up on something, but he fixed it. If I knew mac book pro's had these issues I wouldn't have bought it in the first place. It's freezing on me every other day. It's ridiculous. But what concerns me the most is the Internet connection. So someone please tell me what can I do next to prevent the problem? Am I doing something wrong maybe?

Hi Kevin,
I'm using an XLR input mic which is connected to the phantom power enabled XLR mic socket on a USB M-Audio M-Track. The M-Track is connected by USB to the Mac Pro - so effectively I've got an M-Audio USB soundcard with a mic input. I've also tried a microphone that is a straight XLR to USB cable (guessing with some soundcard chip buried in the usb plug) but that also yields the same effect of bad latency, intermittent quality, stuttering and repeating and echoing (without the speakers on during record so its not feedback).
The mic works absolutely fine with other recording applications I have on the mac at the moment - albeit non-adobe ones (tested it on the EasyAudioRecorder - and it lives up to its name. it's easy)
I will try with Audition and report back, but sitting here right now I can imagine it would work fine with audition too - it just seems to be the way premiere is set up for recording into the timeline is a bit sketchy. I'm willing to accept it might well be a quirk with the new Mac Pro trashcan - I'm not weighting all the woes on premiere.
Any thoughts or am I out of luck to sit with my fingers crossed for a fix in the next round of updates?
Nathan.

No internet connection / Doesn't accept PIN code on reboot

Similar Messages

Maybe you are looking for