NO INTERNET CONNECTION, SERIOUS! HELP PLEASE!

Ok, I have had the Linksys for about a month now and everything was fine. Then suddenly it started dropping the connections, and finally it just dropped. So, I was trying to re-connect and now I'm getting a "no internet connection" and I have no idea what to do !!

Please, someone help. Sometimes I get a "you have a static IP but no real connection", and sometimes my router is not supported.. and its always random. I'd really like to fix this as soon as possible, thanks. I know about the IP release/renew, but it isn't helping. And I checked my networking settings and it says my DSL modem can't get a TCP/IP established..? but when I connect directly to my computer, it's fine, but when I connect to the router.. says same thing but it works o.O. Such as "TCP/IP is not enabled to connect".

Similar Messages

  • Installed OSX 10.4.3 And Lost Internet Connection ! Help Please.

    I have posted this in the Tiger forum but know there is a lot of general expertise amongst FCE users (grovel, grovel!) and I only upgraded to Tiger so that I can get FCE 3.5 for this computer!
    I have updated from 10.3.9 (Panther) to 10.4.3 (Tiger) on my eMac.
    Everything appears OK except I cannot connect to the internet.
    On finishing the installation I got an error message saying "Could not load login file".
    Incidentally, during the installation I disconnected all peripherals including my USB Broadband "modem" (I can't remember the correct terminology).
    My "modem" is a "Speedtouch" and in the dock I have an application named "Diagnostics" which has to open to allow the Speedtouch to connect to the internet.
    "Diagnostics" will not open.
    When I look in my Network configurations the Speedtouch name has a red dot alongside and it is not connected.
    If I open Network Port Configurations the Speedtouch name is greyed out and cannot be selected.
    Any help would be appreciated.
    Ian.
    PS. Luckily my iMac internet connection is OK !

    Nope! I have nothing resembling a stingray or any other aquatic creature!
    OSX 10.4.3 was successfully installed thanks to the resolution of the above hiccup and I have now downloaded and installed the OSX 10.4.7 Combo update which brings my OS to "state of the art" status.
    I will now be able to install FCE 3.5 - if I can get round to parting with the cash!
    Then we'll see what everyone's talking about.
    Ian.

  • Pismo G3 P/Book wireless internet connection information & help PLEASE!

    UK Based.
    My newly obtained G3 PB is running OSX 10.3.9 and has a Dell TrueMobile 1300. 802.11b/g PC Card.
    The card, I understand will allow me to connect to the internet wirelessly but how can I do it please.
    As always, thanks in advance!

    Ian,
    Yes, connect via Ethernet if possible, then launch your onboard Software Update. There may be many updates listed for your machine, but you are interested in the ones for AirPort. If you have never run Software Update, there will also be Security Updates plus updates to many Mac applications. The last thing you want to do is to allow all the updates to be downloaded and installed automatically...this can sometimes lead to problems.
    This would be my suggestion for updating even for just the two AirPort additions:
    1. Launch Disk Utility in the Utilities folder, select your HD in the left column, then run Repair Disk Permissions and Check Disk. If Check Disk reports errors, you will have to boot to another volume like your 10.3.x Cd to make repairs, or you can restart into Safe Boot (hold down shift key at startup chime, release when you see the spinning gear). Safe Boot runs a disk repair during startup and may be able to make repairs; now run Disk Utility's Check Disk again.
    2. If the HD is OK, restart normally so all software loads; do not launch any apps other than Software Update; uncheck all listed items except the two AirPort updates; click the box to download and install. When completed, if you are required to restart, do so.
    3. Disconnect your Ethernet cable, install your WiFi card, then go to Mac Help in the menu bar and enter 'airport', then look for connecting to the Internet with AirPort.
    Regarding other updates: Install the Security Updates one at a time; if you do not use apps for which there are updates, don't bother unless you feel the need to have them.

  • Can't download anything from appstore anymore. Password is correct, internet works. Help, please!

    Can't download anything from appstore anymore. Password is correct, internet works. Help, please!

    It magicallly works again. But thanks for all efforts.

  • My iphone 5 previously can connect to my Wifi at home, but now my phone can't connect to the Wifi even if it's in range , it appears ( unable to connect ) any help please ??

    My iphone 5 previously can connect to my Wifi at home, but now my phone can't connect to the Wifi even if it's in range , it appears ( unable to connect ) any help please ??

    Try reseting network settings.

  • I need serious help please.. We do translations of schoolbooks, I looked for an over-type function but were unable to find, we are working in indesign CS 5. it takes up allot of time to delete text and type in the new language.

    I need serious help please.. We do translations of schoolbooks, I looked for an over-type function but were unable to find, we are working in indesign CS 5. it takes up allot of time to delete text and type in the new language.

    Argh that's frustrating! I never noticed that key did not work in InDesign.
    A bit of research and it turns out the MS Office has this as an option in their software. But I cannot find an option in InDesign preferences to make this work.
    However, somethings are not listed in the shortcuts and preferences and are hidden triggers in InDesign which can be accessed through a script.
    I'm not saying it's possible to activate the Insert Key through a script, but it's plausible that it can be activated.
    Maybe ask on the scripting forum? InDesign Scripting
    I know this may be a possibility as with InDesign's earlier versions of PDF export to interactive documents there previously was no way to export interactive pdfs as single pages if in Spreads.
    But the option to toggle this setting was scriptable.

  • Firefox has been causing drops in my internet connection lately. PLEASE, PLEASE, PLEASE HELP!

    OK, I recently wrote to the author of Session Manager about this problem, since I thought I'd narrowed it down to that, but, well, maybe not. I'll copy & paste that conversation here, rather than waste a lot of time writing up something from scratch, especially since I've already wasted an INCREDIBLE amount of time on this problem, and I'm about ready to go berserk...
    Hello. I've been using Session Manager for a long time, but lately, it's been causing a problem that's been driving me out of my skull, and I think I've finally pinned it down to SM. lately, when I've tried to load sessions, even with a small number of tabs, it's caused my internet connection to drop, or, at least, to slow down to the point where pages try to load, but finally come back with a message that the connection timed out, or the page had took too long to respond. I have my Windows Vista Home Premium computer running Firefox 11 connected via Ethernet to a wifi router that is connected to a cable modem. I tried disabling pre-fetching, resetting my router to factory settings, I tried a different router, I tried removing the router and connecting directly to the cable modem, i tried a different modem, I tried disabling the Symantec extension, I tried clearing windows' DNS cache, I tried disabling Firefox's DNS cache, I tried disabling Symantec's Firefox extension (I have Norton anti-virus), and I tried disabling my anti-virus & firewall programs (hmmm, did I leave anything out?), but none of that solved the problem. I haven't noticed this behavior with any other program, and Firefox goes along swimmingly otherwise. The reason why I think I've finally pinpointed it as SM is that trying to load a certain 9-tab session caused this problem multiple times, but I eventually got it all loaded correctly, and then I tried restarting it, and Firefox's own built-in feature of loading the tabs and windows if it closed properly the last time worked just fine, and it loaded quite quickly.
    So, why might this be happening, and what can I do about it? Do you think it might be a matter of the SM data being corrupted/ If so, how do I get rid of it? I found the Session Manager Export Tool extension and exported my sessions and then tried uninstalling and re-installing SM, but it hadn't gotten rid of the old SM data. Please help, as I consider SM to be a vital part of my Firefox and have come to rely on it, plus I'd like to be able to use my old saved sessions again. Please help ASAP, too, as I've already wasted an unbelievable amount of time on this and I am extremely frustrated and aggravated. Thank you.
    The response I received:
    "Session Managwr cannot cause your Internet connection to drop, it simply doesn't have the ability to do that. All it can do is cause Firefox to restore tabs that have been saved. It can cause lots of web pages to load, which could slow down Firefox or possibly your Internet connection (if you have a really slow connection), but it can't drop your Internet connection. The only exception to that that I can think of is if your modem has a web page with a reboot button and you press that, then save the session such that restoring the session causes the reboot button to press, but that is extremely unlikely.
    By default Firefox loads tabs one at a time anyway so it's unlikely to slow things down when loading sessions. If Firefox can restore sessions properly, the Session Manager should be able to do so as well, since Session Manager uses Firefox's restore capabilities.
    I'd recommend disabling plugins in Firefox and/or other addons and see if that helps. If you can figure out what changed recently that would help narrow things down.
    As for Session Manager data. It doesn't store anything other than the sessions. You can delete those if you wish."
    My reply:
    Well, I have a cable internet connection, so I don't think speed is the problem there.
    Are you sure about Firefox loading only one tab at a time? I know when I load a session, it seems to show several tabs loading at the same time, and I can't remember it ever not being that way.
    Frankly, though, I need more specific, targeted help than being told to just start randomly disabling extensions. I've ALREADY wasted an INCREDIBLE amount of time on this and am ALREADY EXTREMELY frustrated and aggravated, and to just go blindly shooting around in the dark at random is only going to throw craploads more wasted time and aggravation onto the already huge pile. I'm at my wit's end here. I can't take much more of this. I need REAL help. I need more specific, targeted advice about what sorts of things I should be looking for, what sorts of things I should be trying, etc. I don't have any patience left to just start flailing around randomly and likely getting nowhere fast.

    Hi,
    You can try to verify that '''Don't load tabs until selected''' is enabled in '''Tools''' ('''Alt''' + '''T''') > '''Options''' > '''General'''. [https://support.mozilla.org/en-US/kb/Options%20window%20-%20General%20panel?as=u Options > General]
    [https://support.mozilla.org/en-US/kb/Options%20window Options]
    If the problem persists please also check in a [https://support.mozilla.org/en-US/kb/Managing-profiles new profile]. If the new profile is okay, you can later [https://support.mozilla.org/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile?s=profile&r=1&e=sph&as=s copy the needed personal data] from the old profile and start using the new profile. You can then delete or troubleshoot the old profile. Firefox stores your personal data and settings in [http://kb.mozillazine.org/Profile_folder another location (profile folder)] separate from its [http://kb.mozillazine.org/Installation_directory folders/files]. A new profile would have the default Firefox settings in '''Tools''' ('''Alt''' + '''T''') > [https://support.mozilla.org/en-US/kb/Options%20window Options] and [http://kb.mozillazine.org/About:config about:config], and usually would also be empty of '''Extensions''' and themes ('''Appearance''') in '''Tools''' > '''Add-ons''', and their settings. Also, a new profile would have no previous stored website cache/cookies/data/preferences: '''Tools''' > [https://support.mozilla.org/en-US/kb/Clear%20Recent%20History '''Clear Recent History'''].
    [https://support.mozilla.org/en-US/kb/Profiles?s=profile&r=2&e=sph&as=s Profiles Howto]
    [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder & Files]
    [http://kb.mozillazine.org/About:config_entries about:config Entries]

  • Keep losing internet connection!!  Please help!!

    I'm connected to the internet using ATT DSL Built-In Ethernet. On a daily basis I will lose my internet connection. This is extremely frustrating. Please reply with any helpful suggestions.
    thanks,
    matt

    I have the same problem, both on my iMac and Mac Mini. I had several calls in with a case number and so far, the last call seems to have fixed the problem. I have a DSL modem that is in bridge mode for supporting 2 Linksys routers, one wired, one wireless. Sleep is part of the problem, as the IPA does not appear to refresh on waking up and another device may be using that IPA
    First, we created a new location. Go to system preferences, network, location (where it defaults to Automatic) and add a new location. A good tip was to use todays date, in case you add additional ones. Select that location and hit apply. The system was restarted, then put in sleep mode to see if the internet would connect after sleep. Internet connection remained, however, the test would be overnight. Next recommendation was to change the client lease time on the router for IPA. The default is 1 day, which may mean the lease expired when the computer was asleep, and hence requires a manual renew. I changed the time to the maximum, which was advised was OK if there are not a lot of devices.
    So far, so good. If the problem continues, I will assign manual addresses on the Macs versus using automatic DHCP.

  • Cannot Connet to sever. Because you are not connected? Help Please?

    Ok , i was on a website on my ipod, when the ipod password thing popped up, saying i need to enter my password for my  internet connection. I exitted the site, and then i went to setting and entered my passsword, but it just says unable to connect. I dont get it, it has been running fine for a month. I have the neswest ipod with the newest update. Im beginning to think that the website messed up my ipod. Because i tried to restart the ipod, and i even restored the ipod and they both didnt work. Im really fustrated considering i just got this ipod like 2 months ago, not even. And the wireless connect its self works, because im using it to be on my laptop, and my sister goes on her laptop fine. but out of nowhere it just stops working. Please Help.

    Yes, the reason you are getting the error is the phone cannot provide internet for the laptop and then update itself. It would lose connection as you erase the firmware and try to update. You need to connect the computer to the Internet in some other fashion before you connect the phone to try and fix the update problem. As Ocean20 says, and I completely agree, how would you think you could use the Internet connection of a device that is not only going to turn off and on, but is going to get completely wiped of firmware and restored? It would completely remove the device from the equation here. Does that make sense to you?

  • WRT54GS cannot detect an active internet connection. HELP!

    Ok well just recently, I don't know why though but my router won't detect an active internet connection from my Cable Modem. I have my Router and Modem connected so I can play Xbox in my room. Well since my router can't detect an active internet connection now since the new Xbox update doesn't allow you to enter the encryption key anymore, I can't go on Xbox live because of it. I've tried changing the ethernet cable in different ports and it still doesn't work. If someone can please help me with this, it would be greatly appreciated. Thanks.
    Solved!
    Go to Solution.

    You should reset your router and re-configure it...
    1. Press and hold the reset button for 30 seconds.
    2. Then, unplug the power keep holding down the reset button for
    another 30 Seconds.
    3. Plug back the power back in, and keep holding down the reset button
    for 30 Seconds.
    4. Release the reset button.
    To re-configure your router follow this

  • TS1398 I am connected to my wi-fi and have full signal but im not connecting online, help please

    Connected to Talk Talk wi-fi with full signal but not connecting to internet, then my connection to wi-fi goes and I try to connect again which it does but still can't load to internet, help please

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • AEBS drops internet connection.  HELP!

    Thanks for all your comments. I just purchased an AE (801.11n) and it updated the firmware to 7.2.1. I have yet to be able to maintain an internet connection for more than two minutes. I have reset the AEBS numerous times, reset my DSL modem, tried using a cable versus wireless and all with no effect. Many have suggested rolling back the firmware to 7.1.1 but I don't have that option. The earliest version I have available is 7.2 which I've tried as well. I've tried every suggested fix I've seen on this link and none have been successful. I've literally spent days trying to get this thing to work. By the way, I plug my old Airport Express back in and I'm in business. No internet dropping. No problems.
    Do any of you get to the place with stuff like this where you would like to run over your AEBS with your car?
    Apple or anyone else out there that has any further suggestions would be greatly appreciated.
    Thanks.

    Follow the steps here "Firmware 7.2.1 bug resolution" http://discussions.apple.com/thread.jspa?threadID=1133963&tstart=0 Even though I indicated in the post the one bug found was for not connecting to the networked hard drives it may also help your dropped WIFI issue. Doing this is a lot faster than waiting on Apple to release another firmware version since we've been complaining about this issue for over two weeks.
    FYI: you can download the previous firmware versions from the Apple "Downloads" link on this site.

  • I got tis ipad 4g from ireland recently and i brought it to india with me and i got tis micro sim from a local service provider and it was activated 3 days later and show the name of service provider at the top but no internet connection.pls help

    pls help

    agil123 wrote:
    wud u not be able to get internet without signing up for data service
    Correct, a standard phone service will not provide internet connection. You need to talk with your cellular provider and ask for a data plan for iPads. Not a phone service.

  • No Internet.  Need help please!

    Ok here's the story.  I have an iPhone 3G with Net10.  Everything worked fine until the 17th of this month then I couldn't connect to the internet anymore without wifi.  I have contacted Net10 with this problem, was on the phone with them for an hour and half.  After trying to install a new profile, that wouldn't install, and even erasing everything and rebooting, I still cannot connect to the internet.  They told me that they have done everything they can and I now needed to contact Apple.  That everything on their end was good and said I should be able to connect.  Can anyone please help me?  I would greatly appreciate it. 

    Depending on what version of iOS you have, that is an older AT&T carrier file. The current file is 15.5. That may be the one that Net 10 generally uses though. If you do not have access to the APN settings, then you need to contact Net 10 to find out if they have a carrier file that you can use and load on your phone to provide their current settings. This is more than likely your problem, your APN settings will no longer allow you to access Net 10's network. They are going to have to work this out, it really isn't an Apple problem. The carrier files can provide or deny access to setting areas and the APN area is one the most frequent denials. That makes it so people cannot try and make configuration changes and mess up their access.

  • Macbook Internet Network Hacking (Help Please!)

    Hi, Thanks for looking...  I am concerned that my apartment neighbor (a computer network engineer) might be trying to hack my Macbook and snoop around with my internet usage, and possibly access my Macbook remotely. Could someone please answer a few questions to ease my concerns please? (The Macbook is connected directly to the broadband modem and there is no wireless internet involved.)
    // I suspect he might have gotten physical access to my broadband modem and seen it, is there any information on the modem itself that would give him access to my macbook and internet usage? (The modem says: cable RF MAC Address... and a serial number)
    // How easy is it to hack a specific Macbook? Say if my neighbor was indeed a hacker, and wanted to mess with me for whatever reason, would it actually be possible to find out my internet IP address (could he hack the ISP?) to snoop around with how I use the internet? (The Macbook now has the firewall enabled and file sharing, etc. switched off.)
    I know very little about this computer networking stuff, so I'm thinking the worst scenario is happening (which is hopefully far-fetched and exaggerated.) If anyone could help me by sharing their knowledge that would be an awesome help! Thanks!

    Depending on the router, it may be very easy for him to hack it, whether he has seen it or not. If you believe this may have happened, see How to manage a hacked wireless router.
    As for hacking the Mac, that's not a significant concern unless he has had unmonitored physical access to the machine. If he has, the only way to be sure he hasn't installed something to monitor you is to erase the hard drive and reinstall everything from scratch.
    If he is able to get on the same network as you - which you should make sure to prevent by securing your wireless router - be sure everything in System Preferences -> Sharing is turned off. If you must have a service there turned on, be sure it can only be accessed using a strong password.

Maybe you are looking for

  • 500 Internal server error while running sqlsrv_query in PHP

    Hello everyone I am having a problem with sqlsrv_query I will be grateful to you please provide some help. I am running a query through php: $ls_parcel_query = "select  * from  ParcelDetail order by ExtractDate"; $result = sqlsrv_query($conn, $ls_par

  • Image quality CFPDF

    Hello, I'm creating a PDF with CFDOCUMENT and CFPDF and I have two questions 1. I'm trying to insert an image with the following code: <cfdocument name="cover" format="pdf"> <img src=" http://www.domain.com/image.jpg"> </cfdocument> <cfPDF action="wr

  • Time Machine destination not resolvable?

    Time Machine/Time Capsule has been working flawlessly until 2/24 when I started receiving the following error message: "The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk." I

  • Cannot uninstall Business Objects 6.5 SP2

    I'm going through the Windows Add or Remove Programs and selecting Business Objects 6.5 SP2.  First off I get a dialog box to "Install or remove fixes"?! with 2 radio buttons "Install Fixes" and "Remove Fixes".  Only "Install Fixes" is enabled, so I

  • Performance Appraisal - Transports

    Hello Experts! I am wondering about best practices involved in building performance appraisals.  I know that you can use a transport function for performance appraisals, however it does not really work well for me.  When I attach Category Groups (VB)