No internet, drivers installed

Hi I installed Windows yesterday (Windows XP SP3) but to my dismay, I can't get internet wirelessly or through a cable. I don't see any connections pop up or anything like that, and I can't tell if theres a setting off or if I should just reinstall. To clarify, I have installed Boot Camp 2.0 drivers and Ive reinstalled them multiple times. Any suggestions? Im attempting to connect both through an Airport base station and have tried directly connecting to my internet modem. Thanks.

You may want to edit your name from screen shots in the future.
On W7, you have a higher version (6.30.223.215) of the 802.11n driver compared to what I have on W8.1 (5.106.199.1).
This is from bootcamp.xml file
<Name>Broadcom 802.11 Network Adapter Driver
<InfName>bcmwl6.inf</InfName>
<Class>Net</Class>
<ClassGUID> {4d36e972-e325-11ce-bfc1-08002be10318}</ClassGUID>
<CatalogFile>BCM43XX64.CAT</CatalogFile>
<Provider>Broadcom</Provider>
<DriverVer>11/13/2012, 5.106.199.1</DriverVer>
<ServiceBinary>bcmwl5.sys</ServiceBinary>
<HardwareID></HardwareID>
<isX64>Both</isX64>
</Name>
Can you check the USB that you built with BC Assistant or manually from Bootcamp downloads to see what you have?
For my model, using System requirements to install Windows on your Mac via Boot Camp - Apple Support, I get Boot Camp Support Software 5.1.5621.

Similar Messages

Need help installing internet drivers for OS Lion

Howdy all! My question is in regards to the download and installation of internet drivers for a 2011 MacBook Pro running Lion. The wi-fi airport works and recognizes available networks, but I am unable to connect to the internet.
Are there any particular sites you might recommend to download internet drivers for this model and OS?
Thank you for your time!

acolverson1,
are you also unable to connect to the internet by trying your MacBook Pro at a different site, say, somewhere that offers free wi-fi? Do you have access to a different computer, to see if that different computer would be able to connect to the internet by using the wi-fi that you have at home? It sounds as though you haven’t yet determined where the cause lies yet, whether it’s with your MacBook Pro, your router, or your internet service provider.

Tried to update iPod, failed, no new drivers installed. Now iPod does not show in my computer or in iTunes.

Anyone know how I can update/unbrick this iPod? It's useless. It's stuck on the screen that says connect to iTunes. iTunes doesn't know it's there. My computer doesn't know it's there. It's not the USB port.
Please don't direct me here - http://support.apple.com/kb/HT1808 - already tried, no results.
Last time it was a missing driver for iTunes but iTunes says nothing new is needed. Help appreciated.

Let me try this again. My computer said my iPod needed an update. I clicked ok. iTunes said it was doing the update. I browsed the internet. I came back to it after it was done, and it said update failed, no new drivers installed. Now my iPod touch is a brick. I cannot use it for anything. You know that screen that shows the usb cable, a white arrow, and iTunes? It's stuck there. No amount of pushing the sleep/wake button and home button will convince it to go to any other screen. When I go to 'My Computer', it does not recognize that there is anything there. It is not the USB port. Everything was fine until the update tried and failed.
I am not installing iTunes (piece of crap software that it is) on the other computer in my apartment.
I have exhausted the articles that sort of go with the problems I am having. They all assume a non brick iPod. Mine is a brick and therefore those articles, including the one you linked, are not relevant.
Not meaning to be rude, but I came into this not caring much for Apple's business model. I've had my iPod for .. a week? Maybe two, and nothing I've seen has convinced me to feel otherwise. Apple's products are supposed to just work. I am not finding that to be the case. Anyone with anything helpful please?

Windows XP hangs on 'spash' screen after video drivers installed on K8N Neo4-F

Hiya folks - got a MASSIVE post for everyone here... Sorry but I think it's necessary... Here goes:
I just upgraded everything in my computer except for the HDD. New case, power supply, etc. I started by copying all important data from my original HDD to a portable USB 2.0 drive. My data is safe, and intact on that drive. So... I formated and repartitioned the oroginal hard drive (1 partition), assembled the system and everything runs perfectly. The problems come later....
The Windows installation is insanely fast and smooth... and the system boots into Windows with no problems after installation is complete. I didn't even need to install the nVidia RAID drivers because windows detects my single SATA drive fine. The First thing I do upon seeing the desktop for the first time is: Install nVidia chipset drivers, then AMD Athlon 64 driver (both latest releases). I then restart and the system boots fine. After Windows starts, I'm asked for display drivers. I click 'cancel', as specified in my ATI installation guide, open up the ATI CD and install the drivers via the ATI autorun setup. At this point, there are no further drivers for me to install and NONE of them have an "!" near them. So I figure everything is A-Okay and restart... BAM!! - Windows hangs on the splash screen. The blue bar moves for about 10 minutes, then stops for 2, then moves for 2, and so on... This will go on FOREVER.
So... I boot into safe mode and uninstall the ATI software/drivers with the help of some other third-party programs, schedule a disk check with CHKDSK and reboot. I startup in Directory Services mode to allow the disk check to complete. No errors and the system restarts on its own (supposed to). Now the system boots in normal mode again, but no video drivers installed. So I download the latest drivers from the ATI website and install them. I restart, and WHAM! -- same problem. At this point I'm thinking "bad video card" so again I go into safe mode, remove drivers, schedule disk check, etc.... restart in Dir Serv mode... "one or more errors found" this time... but that's okay.
After the auto-restart I shut down the computer and unplugged EVERYTHING but the video card, HDD and one stick of RAM... then reset the CMOS, checked battery and PSU outputs (all fine) I then went back into the BIOS to ensure everything is set to 'as safe as possible' and restarted. Again I tried the latest drivers, and again the same problem after restart. So I then booted into safe mode, but left the drivers intactthis time. I scheduled another disk check and restarted again in Dir Serv mode. After system restart I shut the computer down and switched to my other RAM stick and booted... same problem. now I'm DEFINITELY thinking "bad video card" so I plug everything back in the way it's supposed to be, reset CMOS and restart with the Windows CD the drive. I again format the HDD, etc... and install Windows.
Now, with another fresh Windows install, having read multiple tech articles, I thought this could be an issue with the NV SW IDE drivers, so I installed the driver pack minus that driver. I restarted and the system boots fine. Next, I again tried installing the latest ATI drivers, restart, and SLAMMO! -- again the system hangs on the splash screen. So, rather than waste my time with disk checks, etc... I did ANOTHER clean OS install. This time I decided to try installing video drivers BEFORE the chipset drivers... no such luck. I restart and Windows hangs in the usual spot.
NOW, I'm REALLY getting upset and can hardly contain my fists of rage that crave to desimate the computer case and all its internal componets. Time to RMA the video card. I exchange the card for the same type, thinking this will solve my problem, I drive happily home with the new card. Wouldn't you guess it... SAME PROBLEM, on ANOTHER clean OS install!!! Now I'm thinking "bad mobo"? - I don't know because it boots fine and runs fast without video drivers, but it seems to be directly linked to the video card. So... I figure "okay maybe these nForce boards don't like ATI cards"... so I return the Radeon X700 and exchange for a BFG GeForce 6600GT. Yep, you guessed it, STILL the SAME problem!!!
I 'm pretty-sure the problem has got to be with the mobo but I can't be too sure. It doesn't seem too likely because the system boots and runs fine with basic Windows VGA drivers. Also, if I were to try and boot to VGA mode after encountering this problem, that would not work at all either, in any situation, other than after removing the ATI drivers or installing windows without them initially. Right NOW, as we speak, I tried uninstalling the nvidia drivers/software via safe mode, I ran disk check, etc... but the system will no longer boot in normal mode or VGA mode even without the nvidia drivers installed. I've formated the hard drive and am ready to reinstall again if I can find a solution to this problem.
If ANYONE can help me it would be EXTREMELY APPRECIATED! I'm not a dummy when it comes to computers but this is pure MADNESS!!! I couldn't even BEGIN to fit everything else I tried into this forum. I had to sum-it-up, but I will gladly answer any questions from you 'brains' out there and will monitor this site daily. I won't ask the question and disappear never to tell of the solution I may or may not find...
Thanks in advance,
Eilios

Quote from: EdwinGF on 26-October-05, 16:01:40
Hi,
If you only have one Serial ATA Hard Disk, then you don't need the nVidia RAID Driver. This driver is only needed when you set up a Serial ATA RAID Array or a Parallel ATA RAID array. For this you must have two identical hard drives in your PC, for RAID 0 and RAID 1 arrays.
nVidia SATA RAID drivers supports RAID 0, RAID 1, RAID 0+1, and JBOD. When you install at least two Hard Drives, prepare your mainboard to use SATA RAID and
set up the RAID Array style you want to use.
Then you will need to install the nVidia RAID driver, to allow Windows to "See" and use the drives correctly. This is done by pressing the F6 Key, inserting the nVidia RAID Driver disk , and "telling Windows" where to find the driver it needs, at the very beginig of the Windows XP setup process.
However if you install a RAID driver with just one SATA Hard drive, or two SATA hard drives, (this last scenario not set to be used in an array, but as two different use drives, lets say one for OS and one for MP3 Storage), then Windows begins to load, it will load the RAID driver, but since there's no RAID Array, Windows will keep "looking" for an inexistant RAID Array, and if there's no such RAID array, this will take forever.
That's why installing nVidia RAID Driver may hang your system (which as you saw is not really hung), at the Windows Splash Screen, it is just trying to find something that doesn't exitst.
NOTE: nVidia RAID Controller, supports RAID Arrays into both, the Serial ATA channels and the Parallel ATA (IDE) channels too. But for both options, you always need to have at least two identical hard drives installed to build up and use a RAID Array, which can only be seen by the nVidia RAID Driver, for both Serial ATA hard drives and Parallel ATA (IDE) hard drives.
NOTE: JBOD stands for Just a Bunch Of Disks = In this scenario, you can combine hard drives of different brands and/or capacities into one big drive that will be seen by Windows as one drive only.
NOTE: Even if you don't have any RAID array, you must install the nVidia nForce 4 Drivers. You can just leave the nVIDIA SATA Driver check box empty.
Hope this helps
I did not have any RAID or SATA drive in my system, actually these were disabled in BIOS. I had the similar experience though. BTW, why NF4 chiset driver is very important to install if Windows XP drivers can get the job done? Look at my link in the previous post.

SCCM Driver Injection : What am I missing? Need help with getting drivers installing correctly in my environment.

Everyone,
I'm not new to using SCCM, but i'm VERY new to setting up and managing it. I have just laid it down for the school district that I manage, and i'm loving it. Imaging is going great, all but one thing now...drivers installing.
Let me tell you what I've been doing, so hopefully a kind soul out there can tell me where my logic of the driver "injection" process is lacking and might can fill in some gaps.
I downloaded all drivers pertaining to the 7-8 series of computers we have in our environment currently, and imported them based on a criteria such as this:
x86.LenovoEdge71.Desktop
x86.DellOpti755.Desktop
so forth and so on
I created packages based on the same exact naming scheme. I update my distribution point at the end of the import, and all the drivers/packages/categories are in place. When I go to Monitoring/Distribution Status/Content Status, all of my packages
show up , but under targeted it says 0.
My thoughts from reading online, is I upload all these drivers and during my task sequence where it says it's "applying device drivers" it's set to "install only the best matched compatible drivers" and "consider drivers from all
categories". I also checked "do unattended installation of unsigned drivers no versions of Windows where this is allowed".
so correct me if my thinking is incorrect, it should search through all series of the computers we have in our environment and grab the best drivers from the overall database. Is this not right?
The reason I ask this, is we have a few hundred HP 6000 Pro desktops. WHen I image them, it comes up with 2 unknown devices. OF these, I can manually point them at the folder from which I uploaded the drivers for this series/category and it installs
100% successfully...MANUALLY. What's the reasoning behind this?
I can't help but think there's something missing in my process / logic and I need to be set straight.
Can someone out there tell me what i'm doing wrong? We're planning a district-wide re-imaging before summer's over, and the clock's ticking...but the drivers being installed are all that's keeping us from starting our migrations.
Any help on this is GREATLY appreciated, thank you very much!

You have setup everything correct, but for your desired result you need to use "Apply Driver Package" Task rather than "Auto Apply Drivers".
Auto Apply drivers will install the best matched/compatible drivers for only the PNP devices.For more info on this:http://technet.microsoft.com/en-us/library/bb680990.aspx
Whereas "Apply Driver Package" would install all drivers you have in the package and hence you don't see the unknown drivers in device manager. For more info on this: http://technet.microsoft.com/en-us/library/bb680403.aspx
If you have multiple models, create this task for each model individually and then associate with a WMI query condition under Options tab to check the manufacturer/model
Example: Select * from Win32_ComputerSystem where Manufacturer = "HP" and Model Like "6000%"
Regards,
Manohar Pusala

No HDMI sound to my TV with my g6 notebook with HDMI Codec drivers installed.

No HDMI sound to my TV with my g6 notebook with HDMI Codec drivers installed using Windows 7.

Having the same issues, any help would be appreciated.

Install sharepoint 2013 project templates for VS 2012 without connecting to internet - offline install

HI,
is there any way i can install thE sharepoint developer tools in my dev machine for woirking with SP 2013 AND VS 2012?
i am not getting the sharepoint project templates when i went to VS 2012.
so the link says that i need to connect to internet and install web platform installer 6.0.
but my machine cant connect to net .
if anyone has done the offline installation of sp 2013 project templates for VS 2012 , pls provde me the links / ways.
help is highly appreciated!

check this blog
you need to install Microsoft Office Developer Tools for Visual Studio 2012 to get the project templete
http://blogs.msdn.com/b/timquin/archive/2013/01/22/setting-up-visual-studio-2012-for-sharepoint-2013-development-offline.aspx

Possible to Have Multiple Graphics Card Drivers Installed?

Is it possible to have both the nVidia propritary, nVidia legacy, and ATI open-source drivers installed all at the same time, because I have set up a portable Arch Linux system, and I want to have want to have 3D acceleration on all of them.
My computer has an Radeon X1300, and I'm using the open-source driver for it, and this one has a Riva TNT2 Model 64. I think the comps in the tech lab also have nVidia cards, but newer.

Mr.Elendig wrote:
Wintervenom wrote:
Is it possible to have both the nVidia propritary, nVidia legacy, and ATI open-source drivers installed all at the same time, because I have set up a portable Arch Linux system, and I want to have want to have 3D acceleration on all of them.
My computer has an Radeon X1300, and I'm using the open-source driver for it, and this one has a Riva TNT2 Model 64. I think the comps in the tech lab also have nVidia cards, but newer.
nvidia and nvidia-xxxx conflicts with eatch other, so no. As said, only the drivers that comes with X.org play along with eachother. Welcome to the beautiful world of closed software.
You can have them both as packages an install 'em/uninstall 'em as needed...
You could make a nice simple script to run at startup so you can choose which xorg.conf to use, you could easily have many and just symlink them to xorg.conf as needed... all you kneed to know is some bash scripting.
I'd try and use a DAEMON aproach by creating and rc.d script, but you could try as you like

Can I have multiple Oracle drivers installed?

I have a Windows 2000 machine that has Oracle 7.3 drivers installed for one application and now I have another app going on that has 8.01.07.00 of the Oracle driver. I have been having problems getting the new driver installed and then both apps running. If I can get them both installed, will I need to combine the tnsnames.ora files into one or can I have both?
Thanks.

I'm assuming that you have two different ORACLE_HOME's (i.e. both Oracle7 & Oracle8 client software has been installed into different directories). If this is the case, I believe this should work, though I don't believe it's officially supported.
8i added official support for multiple Oracle homes-- the latest ODBC drivers support multiple homes, although the ODBC drivers didn't add this support right with 8i. You may try grabbing the latest 8.1.7 driver, just to make sure that you've got a multi-home capable driver.
Justin

Problems connecting to internet after installing Leopard

I have been having problems connecting to the internet after installing Leopard. I have a G5 at my office and use safari and AOL, using a cable modem and router. Everything worked perfect until I installed Leopard. About 3 days after installing Leopard on my G5 I started having problems connecting to the internet. When opening "network" in preferences it tells me I am connected, but I cannot connect. So I have to restart my computer every time in order to connect. Then to top it off, often in the middle of the day I am able to get and send e-mail with AOL, but my Safari does not connect. And even more bizare, if I am connected and sign off my AOL, I lose Safari as well. Brought the G5 into the Mac store and after trying some stuff they told me "it should work now" but ....same problems. So last Monday, I installed Leopard on my Macbookpro which I use at home wirelessly, everything worked well until yesterday when the same issue with my G5 is happening with the macbookpro. No connection, it tells me I am connected, signal is strong, but nothing.....so restart and keep going. What is going on? Anyone else having same problem? Any solutions
Roberto

Roberto,
Is the install of Leopard on the G5 and MacBook Pro an upgrade install or a clean install?
Try some simple maintenance to see if this resolves it:
1. Run Repair Disk Permissions (Disk Utility)
2. Go to Network Utility and go to Ping enter in www.cnn.com and see if the packets are received/sent. This is just to see if you can get to the outside so to speak
3. See if your cable modem manfacturer has a leopard upgrade. Sometimes hardware companies need to upgrade their firmware when new Operating systems come out

Illustrator CC crashes on launch in Windows 8 w/ no wacom drivers installed

Oddly enough, Illustrator CC is crashing about 5 seconds after I launch it, around the time that the little trial window pops up. Obviously I can't see if I even like the software if the darn thing doesn't work. I have no wacom drivers installed which seems to be the issue people with windows were running into. I don't think it's creating a crash log because I can't find it. I'm beyond frustrated with Adobe at this point. Please, please help.

I believe so, but I included some screencaps of the font faces themselves just in case. They're all TTF. No font management. Thanks for the reply.

Do I have the right drivers installed?

& I have an X-Fi Xtreme Gamer (but the Dell version) that has the optical ports on it also.
I'm running Windows 7 64 bit. The Device Driver says:
Creative SB X-Fi
4/9/2009
6.0..374
I d/led and installed the beta drivers, so I thought it shoul;d be 2.8.03

*Re: Do I have the right drivers installed? jmacguire wrote:
"The shutdown problem occurs for me, if and I mean if I dont uncheck DTS or Dolby encoding..... I never noticed the bug, until I just now went to my volume panel icon in the tray and enabled DTS, and my system hung at shutdown. I use analog speakers to I dont ever use DTS or Dolby and when I enable it my system does indeed hang."
Well, at least now I know what's going on. It would be really decent of CL were they to document this problem SOMEWHERE here on the website. It's bad enough that DDL is broken in Windows 7. However, forcing their customers to waste days at a time trying to troubleshoot something that isn't fixable, as is, strikes me as pretty bad business manners. :|
Sincerist thanks to you though!

I have both Mozilla Firefox & Internet Explorer installed one my computer, but chose to us Firefox. Several days ago while opening Firefox a screen popped up wh

I have both Mozilla Firefox & Internet Explorer installed one my computer, but chose to us Firefox. Several days ago while opening Firefox a screen popped up which said that my Firefox browser was out of date. I clicked on the box, which said free download. This happened several times and now on my desktop I have Firefox Setup 3.6.13, Firefox Setup 3.6.13.exe, Firefox Setup 3.6.13(2), Firefox Setup 3.6.13(3), Firefox Setup 3.6.13(3).exe, Firefox Setup 3.6.13(4) and I still keep getting the same pop-up screen for a free download of a newer, speedier, more secure version of Firefox. I tried calling Mozilla Corporation in Mountain View, CA; but was unable to speak with anyone. I also got an 800 number (1-800-229-9895) from information and called that number. On the first 800 call the person hung-up. On the second call I spoke to Marv and supposedly got disconnected. On the third call I spoke to Marv again. He informed me that I couldn’t speak to anyone at Mozilla and had to pay $99 to get any help. He also told me that: if I tried to remove the extra Firefox downloads or tried to remove Firefox completely, my computer would crash. I can’t afford the $99 and don’t know what to do next. Can you help me. Jack (Phone number removed by mod).

As far as I know, Mozilla doesn't have any paid support service. There are lots of other companies that advertise paid support for desktop software including Firefox. Maybe you called one of those other providers??
Anyway, I suggest dragging all those exe files on your desktop to the recycle bin. They are all out of date.
Before upgrading, have you considered making a backup? Your bookmarks and other Firefox settings ''should'' be safe during an upgrade, but better safe than sorry. This article describes how you can back up: [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. For example, you can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.
To get the latest Firefox, you can try either of these:
(1) Help > Check for Updates - this should work automatically
(2) Download the installer for Firefox 12 from http://www.mozilla.org/firefox (green button) to a convenient location, then double-click to launch it (Firefox needs to be closed)
After you see Firefox 12, the user interface will look different. For tips on how to restore features you miss from Firefox 3.6, you can ask questions here. For a little advance reading, check out this article: [http://www.computertechtips.net/64/make-firefox-4-look-like-ff-3-6/ Make Firefox 4+ Look Like FF 3.6 | Computer Tech Tips].

Satellite M40x- 286 - no audio drivers installed

Bought this laptop second hand and there are no audio drivers installed.
Please help me out. laptop runs on windows xp.

Hi magorian,
I agree with PauPau. The drivers for your notebook can be downloaded on Toshiba European driver download page in *Archive*.
Furthermore make sure that SP3 is installed. It contains updates for sound drivers and a lot of security updates. If SP3 is already installed, start with sound driver installation.
If you have more questions, just post again! :)

Toshiba 47VL963 doesn't have an Internet browser installed...

For everyone that is reading this why doesn't the VL963 models have an Internet browser installed? For Toshiba, can you please launch an update to include an internet browser? Preferably an open browser with flash support integrated...
I don't understand how can a Smart Tv be called Smart without an open browser in this day and age...
Thank you very much for your time.
Best regards,
Carmo.
Message was edited by: Pitaferrata

Hello Lasko, thank you for your answer.
Why is this model spoken so little in the web? I think I'm the first one posting this question...
But still I don't understand why the (supposedly inferior) model 46TL938 has an integrated open browser, and the 47VL963 doesn't have one... I thought that the T letter came before the V in the ABC... :)
I'll ask one more time: Toshiba, can you please launch an update for us user's of the VL963 series that includes an internet open browser with flash support? That would make my purchase feel not so wrong (when I bought the TV I thought this already was an integrated feature of all 2012 Smart TV indepent of their branding, but I guess you really have to read all the tiny letters in the specifications...), because I don't know anyone in Portugal who has bought this model... And I'm starting to regret it...
Toshiba here is a good example where you can gain or lose one Client! I'm about to purchase a laptop and I was pending for a Toshiba one...
Thank you for your (possible) support!
Message was edited by: Pitaferrata

No internet, drivers installed

Similar Messages

Maybe you are looking for