No internet in santa fe springs, CA 90670

I haven't had internet since earlier today. The router seems to be working properly. My laptop and other devices connect to it but have no internet. On the router the internet light is not lit.

If you are having an issue with your Verizon service, you can use the Verizon Troubleshooter to fix and report issues with your Verizon Phone, FiOS TV, or Internet Service. You can also schedule a repair. Here is the link: http://www.verizon.com/repair
You can also find tools on the Verizon Residential Support page that may help you diagnose your issue: http://www22.verizon.com/residentialhelp

Similar Messages

Unable to access or grab photos from discontinued 3.0

I downloaded over 200 photos to my computer yesterday, not intending for them to drop in Adobe Photoshop Starter Edition 3.0 because I have not been able to register nor unlock the code. For some reason my photos did however drop into this program and now I am unable to retrieve them because the software program is discontinued.
Please tell me how to retrieve my photos from Starter Edition 3.0. I have since registered with Photoshop.com as recommended by Adobe.

Oh darn. I left the camera at home. I will try this tomorrow and get back to you. Thank you very much.
Marilyn Rideaux
L. A. County EMS Commission
EMSAAC Coordinator
10100 Pioneer Blvd., 2nd Floor
Santa Fe Springs, CA 90670
Phone (562) 347-1641
Fax (562) 941-5835
>>> "PS.com Mark" <[email protected]> 9/29/2009 8:59 AM >>>
Starter Edition shows you small preview versions of your photos (we call them thumbnails), but your photos are actually read by Starter Edition from some location on your hard drive. They are not 'in' Starter Edition, so much as Starter Edition has, at some point, been linked to the files. Links can live longer that the actual files can, so hopefully the files haven't been deleted, leaving only the Starter Edition links. Since it sounds like you recently added these files, so I don't think that this is how it will end.
Can you remember what the import window looks like? If you attach your camera to your computer, can you take a screen shot, or describe the window or series of screens that you see? If I can identify what software is trying to copy the files for you, I may be able to tell you where they were copied to on your computer.
-Mark

Spring Cleaning Issues

I have 10.3.9 eMac and lately the system has been super slow, with the little rainbow wheel constantly turning every time I try to move on the web. It's also been crashing more recently. I have been trying to locate a Windows equivalent folder that holds temporary internet files through my Spring Cleaning application, but it doesn't even show cookies. I'm almost positive if I could dump all the internet crap and do a Windows equivalent disc defragment, then my eMac would pick up speed (I use DSL). Does anyone out there know what I can do to clean out the internet muck? Any help would be greatly appreciated. I don't want to have to go out and buy a new computer.
Thanks,
Sandy

See this answer I JUST reported in another post here...
http://discussions.apple.com/message.jspa?messageID=3768173#3768173
Patrick

Reliable service not so reliable..

We offer world-class service and the nation’s largest
and most reliable 4G LTE network. (( I drive from Riverside, CA to Santa Fe Springs, CA on a daily basis))
I can personally tell you up 4 places where the data cuts me off of calls and 2 guaanteed spots where there is no signal.
I have been though this ever since I have joined with verizon(more than 5 years) and finally getting frustrated.
If you would like to contact me then please reach me via email..
you can find that info in my account.
Thanks,
MVP

We offer world-class service and the nation’s largest
and most reliable 4G LTE network. (( I drive from Riverside, CA to Santa Fe Springs, CA on a daily basis))
I can personally tell you up 4 places where the data cuts me off of calls and 2 guaanteed spots where there is no signal.
I have been though this ever since I have joined with verizon(more than 5 years) and finally getting frustrated.
If you would like to contact me then please reach me via email..
you can find that info in my account.
Thanks,
MVP

New MBP - wireless/internet access networking problem - a summary!

Greetings!
New MBP here, with all the trimmings (MacOS X 10.4.10 - Safari 3 Beta). New also to the Apple/MAC world
MBP >> wireless networking into a Linksys WRT54G router and >> thru HughesNet DW7000 Satellite Internet connection (not the fastest, but hey, the US and especially rural areas are NOT S. Korea when it comes to speedy internet connections!
Frankly, I bought into it for two reasons: First, hearing about the vaunted Mac a/v/ and doc/photo editing capabilities,... and about MacOS stability, etc... Well, it all needs a little work still: on the part of new users like me, but also probably on the part of the Apple/Mac people as well. 2nd reason I decided to purchase the MBP - i.e. ability to run Windows (I have not yet tried BootCanp, etc...: still resolving preliminary issues!). I still live in a heavy Win environment at my business - no other way of course!
Communications issues seem to still prevail: I am hanging out at several VERY HELPFUL forums (AppleDiscussionForum, MacRumorsForums, etc...) and the same issues keep popping up. Im my case, same as all above reported, with a few additional points, as follows:
1. Xmission errors: seem to be - at least in my case - a constant factor, regardless on how close/far i am from my wireless router. For example, I would be attempting to dwnload an upgrade (large)QT or MacOS file. i am barely into the dowmoad, and I already have several Read/Send errors. By the end of the download, I will have probably about 15 Rcv and 5 Send errors. Never gets quite that bad in my Win machines, I must mention. Anything to do here (I know, there are such things always affecting wireless com). AND, MOST importantly, how that this affect the effectiveness of the upgrade (I spotted same thing with MacOS 10.4.10 and Safari Beta 3 upgrade downloads!). Would it be likely that applying upgrades in such circumstances would screw up the OS??? Could OTOH such errors be automatically "compensated" by re-xmits from the source, and eventually the download would be OK? Because quite frankly, I do NOT know if my important upgrade download was OK to apply to the system, given those errors!!!
Also same thing with PING errors. Quite frequent when pinging another device on my network.
2. Quite often, accessing a site will proceed somehow OK, and then things will get stuck twd the end, as if some buffer somewhere gets overloaded??? Of course, as elsewhere reported, same can often happen with com getting stuck right over the "www" part of the URL!
3. AND, of course, the often reported "NO connection to the Internet", but computer shows good signal level and connection otherwise.
4. Strangely enough, seems that the Airport Extreme wifi card sort of "warms up the the internet" as one proceeds to start using it. It eventually picks up on a network, and often "improves" its connection over time!
5. Built in Airport Extreme seems to not exhibit up all immediately surrounding networks. Sensitivity issue?? iStumbler does.
6. iStumbler permanently posts noise level of 9% regardless of how close to my wireless router/broadband modem I am. Anyone uses iStumbler to monitor network traffic?
This is getting longuish: I just want to get over all those p*ant issues and get into putting my a/v stuff together!!
- Roger T
Thanks for just reading all this!. I am not sure it is all fixable (back to the Win "features" terminology, really meaning "bugs"??)

Thanks, BDaqua. This support forum is quite well stocked: I have been perusing all its nooks and cranies!
On the www.dslreports.com - All things Mac - forum, I spotted a couple of mentions of the following type of infromation:
link: »www.hardmac.com/news/2007-07-27/#7039
- The first TechNote provides information concerning the Airport problem affecting the MBP Santa Rosa (but also other Mac Intel). When used on battery, the wireless connection drops and one can even experience kernel panic. Apple Centers are asked not to exchange affected notebook as this is due to a unidentified bug in the Atheros driver, and should be fixed in the future with a simple Airport system update. So for the moment, unfortunate users are asked to directly power their notebook when using wireless network, or using Ethernet connection when running on battery... in other words, turn your notebook into a desktop
to forum · permalink
I am wondering if you and folks on this close-to-Apple forum know anything about this. At least, we could just await remedy instead of messing around endlessly looking for solutions and... pondering as to whether it was a wise thing to purchase an expensive machine which happens to have trouble communicating online. After all, seems that the Mac folks are prone to spend MORE time online uploading/downloading music and videos instead of my being normally doing with the rest of my (Win) computers, i.e. work on customer lists, correspondence, inventories, accounting, data bases, etc....
So, seems to me we do have a pb and Apple might just save a few $$$ on silly ads and get to work on com instead. if nothing else to avoid the appearance of further - admittedly rather funny - ad-spoofs!
So back to your further inquiry. I run a wireless network from a HughesNet satellite modem, thru a Linksys WRT54GL wireless router, into some nearby office LANed desktops and point of sale equipment, to another neighbouring facility via wireless bridge, and to my Mac laptop. Distance from the laptop to the router: 50 ft max.
It all works surprizingly very well: up to 200kbps up and 1000 kbps down (in prime time, 150 up and 600 down). OK, my set up looks complex and incurring LOTS of activity. Actually, online activity is quite minimal and well scheduled - right now I am the only machine on the network online. Otherwise, our office processes online money wiring for customers among other things.
I'll try your DNS server choice on the Mac settings first. Will report accordingly.
Thanks for everything!
- Roger T

I am fed up with Spring and Apple passing me off to one another and neither will fix the problem. I am unable to receive a connection on my phone.

I am fed up with Spring and Apple passing me off to one another and neither will fix the problem. I am unable to receive a connection on my phone.
The internet goes out and I have to reset network setting each and every time. This is only a temporary solution which by the time I release the line with Spring or leave the apple store the issue is back. Sprint indicates that it is a know issue with the Iphone 5 and apple says it is a network issue as Sprint's network is not up to par with the Iphone and can not meet the expectations on the Iphone 5.
I have attached a few picture, as you can see it clearly says I have 5 bars and 3g available but I have no connections what so ever.
This issue affects all data and so I can not send or receive picture messages, use apps, or access the internet. The data goes in and out intermittently and it seems the phone chooses what I can and can't do.
For example I can watch Youtube or Vevo videos but I can not access Facebook or Instagram.
Is anyone else having this issue?
I will soon loose my patience....
I have reset my phone three time and have reset network and other setting mutltiple times.

How can an external drive cause my Internet to slow to a crawl and then fail?

I have two WD My Passport Ultra 1 TB USB 3 new drives. One I'm using for Time Machine and one for CCC (Carbon Copy Cloner). I have been trying to use them with my new MacBook Pro retina 13-inch.
For the last few days I've had weird problems trying to connect them via a USB 3 hub. I though the hub was the problem (because things seemed to be fine until I introduced a hub into the equation) and already returned one.
But now I see the same thing happening even without the hub.
It appears that one drive, when connected to a USB 3 port (it doesn't matter which port), even when it's doing nothing (I erased and and removed the CCC task), causes the Internet to slow to a crawl, and then stop. All connectivity ceases.
The instant I unmount and remove the drive the Internet springs back to normal speeds - over wifi about 110 Mbps.
Disk Utility says there are no problems with the disk. So does WD's only diagnostic utility. And the firmware is up-to-date.
The other disk, running Time Machine, seems to have no issues at all.
I guess I will return this drive. It could be subtly defective in some way. But what way? Why would an external USB 3 drive affect the Internet connectivity?
doug

I came across this post while in search of the answer to the very same question only I am experiencing this problem when connecting to a USB 3.0 hub and nothing else. The resuling slowdown in my internet speed leaves me hanging intermittently between screens in Safari, sometimes indefinitely. When I remove the USB cable, normal speeds resume. Activity Monitor shows no undue load on the CPU. I did not notice this problem until just recently. Could this have something to do with the recent OSX patch.
BTW: I am running a 2012 15" MacBook Pro with Retina display.
Anybody have a clue as to what might be going on here?
Gerry

Not able to create a web project with jsf or jsp or struts or spring

Hi,
I am trying to create a dynamic web project with jsf or jstl or struts or spring or any of web options available for a web project, but I am not able to do it.
When I choose any of these options, the wizard asks me to "select an existing jstl/jsf/Spring 2.0 library, or click Add to add a new library." and since it doesn't show any existing libraries there, I clicked on add new library. When I click add, it opens a new dialog box where it has two options :
1. to use spring/jstl/jsf lib from bea web site - when I choose this option, it tries to connect to the bea web site and gives me error that "connect time out". I don't know why it is not able to connect to the internet. I am not able to see the help also. There it gives error "The requested URL could not be retrieved".
2. to use libraries from an existing spring installation - I provide the path of a directory where spring lib are, but then it gives me error that this is not a valid installation.
On another machine, I am able to see the help contents, but still not able to get these libraries from the bea site.
Please help.
Thanks in advance,
Sushma

Hi Sushma,
The issue you are facing has been addressed and will be part of the next release. For the current release, please follow the steps listed below.
Send an email to [email protected] with details on specific facets you are trying to enable on your project.
You will be provided with a url where you can download the required jars and details on how to manually add the jars to the workspace which will prevent the download on demand scenario.
Cheers
Raj

I have had constant problems with my Verizon broadband internet service, and can only assume I will need to cancel my contract.

According to Verizon, my family is somehow using 15 to 16 GB of data per month on our unlimited data plan, sometimes more. This is a jump from 4 to 6 GB in the spring of 2012. We have done nothing to justify such a huge surge in data usage per month, but I don't seem to be able to get any satisfactory answer from Verizon as to what's going on. Our time spent on the Internet is no different than it's ever been. Last month, customer service tried to suggest that a virus we had had on one of our computers must have caused the computer to suck up data without our knowledge, but the virus is gone and our data usage just keeps getting worse. To make matters even more painful, such high "usage" causes Verizon to slow our UNLIMITED data service to such a snail's pace that we can't get anything substantial done online. And, for some reason, we now constantly lose our signal. We are connected via USB, which is a poor way to connect, granted. But it worked fine in the spring of this year. In fact, it was faster than anything we had had previously. Go figure? I tried to download Java last week, and the computer indicated it would take 15hrs to download. What a waste!
Apparently, my only option is to switch to MiFi (we are in a rural location lacking DSL) for my household. And this will cost me at least $60 more per month. Why, pray tell, would I want to pay more money to solve a problem that Verizon cannot satisfactorily explain to me if there are no guarantees MiFi will work any better? I cannot get my money back if it fails to improve our situation. And what about the supposed data usage? Am I supposed to believe that my kids' Facebook time combined with our internet surfing eats up 3 to 4 times as much data as it did only a few months ago? I don't think so. Something is not adding up here. Oh...I do have one other option. Home Fusion broadband added to our account for even more money per month.
Bottom line? Spend more money that I don't have for unreliable service, with what I believe to be bogus data usage charges. I think I just need to cancel Internet service, paying the fee for breaking my contract of course, and take my business elsewhere.
Anyone else having these sorts of problems? What have you done about it?

Regardless with what carrier your with you might have the same issue, My recommendation would be to get a router that will help you with viewing live traffic and keep a tally of your usage and any device connected to your internet connection. You can go with the peplink balance 20 and be able to look at your traffic by the hour, daily, weekly, monthly or yearly. Look for trends, see what computers or devices are doing what I attached a screen shot so you can see an example of mine. You can purchase the router at 3gstore
http://i45.tinypic.com/6zc674.jpg

Can't Open more than One Internet Browser at a Time

I bought a Toshiba laptop this past spring which I use, offline, at the office. i've had a problem with it since the day I hooked it up to the internet the first time. I can't open more than one internet browser at a time. Windows 7. I had need to get online with it today and had forgotten about this problem.
I called Toshiba and they wanted to sign me up to some fee-based service. They said, without checking anything (or even asking me who I am, or what my computer serial number is) that I had a virus. Is there a virus going around that causes this problem? IF so, how could I possibly get it considering I bought this computer in a sealed box?
My AV software does not pick up any viruses. I use Avast.
Can anybody help me?
Thanks.

There's a handy reference for keyboard shortcuts here:
http://windows.microsoft.com/en-US/windows7/Keyboard-shortcuts
That Windows key turns out to be useful, try Windows-D to show the desktop
To open a new browser window, Ctrl-n while in the browser will probably work, or it your browser supports tabs, try Ctrl-t

Design Limitation On ALL Santa Rosa MacBook Pros, 2.2 and 2.4 GHz

While searching the Internet for answers to my new $2500.00 MBP headphone (output jack) has audible hissing sounds I found several posts on Macrumors.com and macintouch.com to explain the design Limitation/Problem. To summarize:
The Problem
The issue has three components, as described in this MacinTouch Report:
- A low hiss that is constant whenever the audio circuitry is on
- Static that occurs whenever anything is playing... even something quiet.
- A series of high-pitched noises that occur somewhat randomly. The best comparison I've seen is that it's like listening to those hearing tests where you raise your hand when you hear a tone.
The problem only occurs with low-impedance headphones (more on this below).
Some Facts
- The problem occurs on ALL Santa Rosa MacBook Pros, 2.2 and 2.4 GHz. It is a design flaw on Apple's part, and returning your machine for a new one will not help. There are plenty of people who say they can't hear the noise, but those people either have high-impedance headphones or speakers, or just don't have very good hearing.
- Only Santa Rosa MacBook Pros seem to be affected by this particular static problem. I've seen some reports of other machines having audio issues, but they are always different.
- The 'Audio Update 2007-001' that Apple released about two weeks ago doesn't fix it. It does fix a popping problem on all Intel Macs (including the SR MBPs), so it's worth installing, but that is a different problem than this one.
- It does seem to be an Apple-specific problem; I've been unable to find any other reports of non-Apple Santa Rosa notebooks having the same problem.
Just wondering if anyone else has had this issue with their new MBP?
Thanks,
B

I experience the issue as well both in OS X and when I'm in Windows Vista.
Whenever a program uses audio, there is an annoying high-pitched hissing noise from the built-in speakers.
Of course the severity of the problem depends on the individual hearing ability, but everyone I have asked, have been able to hear the noise.
Apple is known to be the first choice of audio professionals; however this problem is below that standard.

Lost Internet Connection

Had Playbook since last spring. After updating to 2.0, can no longer connect to any internet - Wi-Fi, Blue-tooth or BB Bridge. Error message is 'connection has timed out" or can not find connection when sitting in known hot spot!!
Have tried all the tricks with no luck......very sad:smileysad.

Try debricking the playbook, that is shut it off, sign into blackberry desktop software and plug playbook into the pc. it will say that the playbook does not respond and ask you if you want to reload software. make sure you do a backup befor this to save your (paid apps) and other apps. It may take a couple of hours.

MBP Santa Rosa Airport Issues w/ Leopard

Hi everyone,
I've noticed a few "quirks" since upgrading to Leopard. Whenever my Macbook Pro (Santa Rosa, 2.4 GHz, 17", 4GB RAM) is searching for a wireless network to join, the system becomes completely unresponsive. The mouse pointer stutters and jumps around the screen and it's impossible to precisely control its movement. When I can finally manage to click on the Airport icon in the menu bar and select the appropriate network to join, the problems stop as soon as a connection to a wireless network is established. It only happens when the system is searching for a Network. I should mention that it does this when I am at work (where I connect via 802.1x and TTLS) and at home (where I connect via an Airport Express Router).
Also, my computer no longer automatically connects to my work network (it does at home, though) after a restart or waking from sleep). I have my MBP set to prompt me for a password when it wakes from sleep, but it's near next to impossible to enter in the password because the system hangs so badly as it tries to establish a network connection. Of course, it doesn't connect unless I manage to click the Airport icon and specify the network I wish to join. Anyone have any thoughts on this?
All of this is a little frustrating since the latest updates to Airport in Tiger fixed all of the connection issues I had had previously with my MBP. When I first bought the machine I had many issues with network connections (as did many thousands of others who bought this model). I was wondering if other MBP Santa Rosa owners have observed similar behavior since upgrading to Leopard, and if so, does anyone have any suggestions as to how to fix this issue?
I should also mention that my Mac Mini C2D 1.83GHz (latest model) has no such issues so I think this is something that is still linked to this particular model of MBP.
Many thanks!

I am moving this over here, from the boot camp section. Hopefully this is more the location that this needs to be in. Well, my problem is not as extreme as some, but still an annoyance. I installed Leopard the first day, and immediately had HUGE airport issues. The computer would lose my hub. I run an Airport Extreme with an Express as a WDS. The computer would see the express, but lose the extreme completely. So no internet. If I messed with it long enough, I could get the computer to recognize the extreme, but as soon as the computer went to sleep, it would lose it again. I installed the keychain update, and the situation didn't get much better. Most of the time I get the "You are not connected to the Internet" error in Safari, and when I run network diagnostics the computer "finds" the internet again, and I get a "Network configuration change detected" message and all my lights go green.
After I installed the Keychain update, I repaired disk permissions. Any ideas?

IPhone 5 gets error that no Internet connection is present when I have 3 bars on sprint and try to refresh mail

I have had my phone for 2 weeks now. Works fine on wifi for Internet so far, but when I am not on wifi, sometimes I get an error stating that it can't get email because there is no Data or internet connection, but I have 3-5 bars. Why would this be? I have sprint.
Also is there a way for the phone to fetch or have the entire email pushed to the phone? When I am off wifi, it seems like it is only downloading the header and it has to reconnect to the exchange server to get the rest, and it takes a while for a simple message.
Any help would be appreciated, this is my first iPhone.
Thx

Hi Yogiee
Exactly - in fact just after I posted I thought of the same solution - define a hosts entry for www.apple.com on my proxy server and download the really complicated 'success.html' file from apple. It certainly isn't rocket science.
So I have it working - iOS6 is completely fooled by my dummy 'success.html' file an is now working on my internet-less wifi network.
PS Just had the 2nd Telstra technician here checking the lines and connections... more adjustments and changed to different lines, and still no internet. It has to be something at the exchange end - it is ADSL syncing and receiving a dynamic IP, logging in and then about 6 seconds later the ADSL connection just drops out. The technician's modem (which doesn't login) remained connected without any problem. Not much chance of it being fixed in time for Christmas now - we've got less than 3 hours of work time left before everybody goes home to wait for the man in the red suit. And somehow I don't think Santa will be able to deliver me internet for Christmas.... (sigh)

Error in deploying my spring web app, really need help?!

I am using eclipe 3.3.0 and tomcat 5.5.23, spring 2.0.6
And I get this error while deploying.
Can anyone tell me where it is comming from and what i should do to fix it?
If you need any more info please ask that too, I really need help..
I have browsed all over the internet, but found nothing really helpful..
In my browser I get a Http status 500 error:
exception
javax.servlet.ServletException: Servlet.init() for servlet jsp threw exception
     org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
     org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
     org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:870)
     org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
     org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
     org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
     org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:685)
     java.lang.Thread.run(Unknown Source)
root cause
java.lang.NoClassDefFoundError: javax/servlet/jsp/JspFactory
     org.apache.jasper.servlet.JspServlet.init(JspServlet.java:100)
     org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
     org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
     org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:870)
     org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
     org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
     org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
     org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:685)
     java.lang.Thread.run(Unknown Source)
And this is what I see in the console:
10-sep-2007 14:16:11 org.apache.catalina.core.AprLifecycleListener lifecycleEvent
INFO: The Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: C:\Program Files\Java\jre1.5.0_12\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\Program Files\Java\jre1.6.0_02\bin\client;C:\Program Files\Java\jre1.6.0_02\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\maven\maven-2.0.7\bin;C:\Program Files\Common Files\Adobe\AGL;C:\Program Files\QuickTime\QTSystem\;C:\Java\SDK\bin;C:\maven\maven-2.0.7\bin;C:\apache-ant-1.7.0\bin;C:\spring-framework-2.0.6
10-sep-2007 14:16:11 org.apache.coyote.http11.Http11BaseProtocol init
INFO: Initializing Coyote HTTP/1.1 on http-8090
10-sep-2007 14:16:11 org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 4312 ms
10-sep-2007 14:16:12 org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
10-sep-2007 14:16:12 org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/5.5.23
10-sep-2007 14:16:12 org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
log4j:WARN No appenders could be found for logger (org.apache.catalina.startup.TldConfig).
log4j:WARN Please initialize the log4j system properly.
10-sep-2007 14:16:14 org.apache.commons.modeler.Registry registerComponent
SEVERE: Null component Catalina:type=JspMonitor,name=jsp,WebModule=//localhost/SpringBikeApp,J2EEApplication=none,J2EEServer=none
10-sep-2007 14:16:14 org.apache.catalina.core.ApplicationContext log
SEVERE: StandardWrapper.Throwable
java.lang.NoClassDefFoundError: javax/servlet/jsp/JspFactory
     at org.apache.jasper.servlet.JspServlet.init(JspServlet.java:100)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
     at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
     at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3956)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4230)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
     at org.apache.catalina.core.StandardService.start(StandardService.java:448)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
10-sep-2007 14:16:14 org.apache.catalina.core.StandardContext loadOnStartup
SEVERE: Servlet /SCWCD threw load() exception
java.lang.NoClassDefFoundError: javax/servlet/jsp/JspFactory
     at org.apache.jasper.servlet.JspServlet.init(JspServlet.java:100)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
     at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
     at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3956)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4230)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
     at org.apache.catalina.core.StandardService.start(StandardService.java:448)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
10-sep-2007 14:16:14 org.apache.commons.modeler.Registry registerComponent
SEVERE: Null component Catalina:type=JspMonitor,name=jsp,WebModule=//localhost/SCWCD,J2EEApplication=none,J2EEServer=none
10-sep-2007 14:16:14 org.apache.catalina.core.ApplicationContext log
SEVERE: StandardWrapper.Throwable
java.lang.NoClassDefFoundError: javax/servlet/jsp/JspFactory
     at org.apache.jasper.servlet.JspServlet.init(JspServlet.java:100)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
     at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
     at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3956)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4230)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
     at org.apache.catalina.core.StandardService.start(StandardService.java:448)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
10-sep-2007 14:16:14 org.apache.catalina.core.StandardContext loadOnStartup
SEVERE: Servlet threw load() exception
java.lang.NoClassDefFoundError: javax/servlet/jsp/JspFactory
     at org.apache.jasper.servlet.JspServlet.init(JspServlet.java:100)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
     at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
     at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3956)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4230)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
     at org.apache.catalina.core.StandardService.start(StandardService.java:448)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
10-sep-2007 14:16:14 org.apache.commons.modeler.Registry registerComponent
SEVERE: Null component Catalina:type=JspMonitor,name=jsp,WebModule=//localhost/,J2EEApplication=none,J2EEServer=none
10-sep-2007 14:16:14 org.apache.coyote.http11.Http11BaseProtocol start
INFO: Starting Coyote HTTP/1.1 on http-8090
10-sep-2007 14:16:15 org.apache.jk.common.ChannelSocket init
INFO: JK: ajp13 listening on /0.0.0.0:8009
10-sep-2007 14:16:15 org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/187 config=null
10-sep-2007 14:16:15 org.apache.catalina.storeconfig.StoreLoader load
INFO: Find registry server-registry.xml at classpath resource
10-sep-2007 14:16:15 org.apache.catalina.startup.Catalina start
INFO: Server startup in 3578 ms
Many Thanks in advance for any help!!
Grz Barbera

hi istvan,
we are also migrating from websphere to netweaver.
But in spring framework we r facing problems.
We hav spring-beans.jar file in lib dir of Web Application. But When we are creating BeanFactory from xml as,
BeanFactory beanFactory = new ClassPathXmlApplicationContext ("client-config.xml");
clent-config.xml file contains :
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE beans PUBLIC "-//SPRING//DTD BEAN//EN" "http://www.springframework.org/dtd/spring-beans.dtd">
<beans>
     <bean id="propertyConfigurer" class="org.springframework.beans.factory.config.PropertyPlaceholderConfigurer" >
          <property name="location">
               <value>conf/service-client/client.properties</value>
          </property>
     </bean></beans>
But code is giving exception: ClassNotFoundException -org.springframework.beans.factory.config.PropertyPlaceholderConfigurer.
Wat is the problem ?
Kindly help.
We are also using JAAS for authentication.We are refering above code from our LoginModules login() method.
Regards,
sagar.

No internet in santa fe springs, CA 90670

Similar Messages

Maybe you are looking for