NO internet in the network except for two computers after installing ASA 5505

Hi Guys,,,
I dont know if any of you guys had a problem like this... I installed a CISCO ASA5505 with 50 user license to my network as the gateway firewall. So ASA is acting as the gaeway router which is connected to a fibre circuit and also it gives DHCP to the network. The strange thing is that except for two computers rest does not have internet. I also have an asterisk phone system which works fine..
I tried everything.... static IP's DHCP, DNS nothing worked. But strange enough two computers works fine and have internet.. but are no special computers. One is Win XP and the other one is Win7. When I troubleshoot the problem in win 7 on one of the computers it says
"The remote device or resource won't accept the connection"
I have no idea now... any help would be great...
Thanks in advance

Hello Amal.
I hope the gateway of the comupters are configured as ASA.. Are you able to ping your gateway from the PC where you dont have access to internet and also check whether the translation is happening on ASA when you are trying to access the internet ( show xlate | i 'local ip'
It would be great if you could share the ASA config as well
regards
Harish.

Similar Messages

I cannot install the latest update for itunes. After installing an ssd with a dual drive kit, and freshly installing osx lion.

After downloading the update and restarting to complete the installation, as the restart process begins it is interrupted by this message: Could not install some of the updates. Then it restarts, and i am stuck with itunes 10.6.3. What could the issue be? Mac Mini mid 2011, 500gb HDD, 128gb Samsung 850 pro SSD, 8gb ram. Running OS on SSD.

First open Disk Utility and try repairing the HD
Next, I would try installing the 10.7.5 combo update
OS X Lion Update 10.7.5 (Client Combo)
Last, post in the iTunes for Mac forum
iTunes for Mac

My ipod has been stuck on the apple logo for two days

my ipod has been stuck on the apple logo for two days after plugging my ipod into a macbook that has recently jailbroke a friends ipod. i did not jailbreak but my ipod still crashed. my home button is broken so i am not able to do all these home remedies i find on the internet. can apple help me or should i just give up on my ipod?

Place the iPod in recovery mode using one of these programs and then restore via iTunes:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem

The wi-fi button on my iPad 2 is not functioning. I have tried resetting the network, worked for 5 minutes. Am not able to connect to internet to reset to factory. What else can I do?

The wi-fi button on my iPad 2 is not functioning. I have tried resetting the network, worked for 5 minutes. Am not able to connect to internet to reset to factory. What else can I do?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I can detect other network except for my own network, weird thing is I alone can't detect the rest can

I can detect other network except for my own network, weird thing is I alone can't detect the rest can. I can see all my friends networks and connect to them, but I cant see mine.

Try to re-position the router or your computer.

My new Ipad2 got connected to my home Wi-Fi and to the network and for 2 days everything was alright. Then I encounteed a problem. Though my Ipad2 was getting connected to Wi-Fi, could'nt access network. How to enable Data Roaming?.

My new Ipad2 got connected to my home wi-fi and to the network. For 2 days evrything qored well. Then though Ipad2 was connected to wi-fi, it did not open the web page/s. The dialogue box read, `Data Roaming is turned off. You can enable Data Roaming in the Network Section of General Settings' When I tried it, there is no item of Data Roaming displayed in the Network Section of General Settings. It shows only two settings. 1. VPN and 2. Wi-Fi. How to correct this issue? Help is needed to resolve this issue. I am from India and Apple do not have any local service providers.Pl. help me.

Sounds like the WiFi is connected, but cannot reach the Internet and is trying to use 3G, but you are in a roaming area so you get the dialog.
The first thing to try is turning the Wi-Fi off and back on again in Settings. Or simply turn the iPad off and back on again. If that doesn't work double-check that other devices are able to use the same WiFi network successfuly, or try the iPad on another WiFi network.

I have 2 iPads both the sane except for case color. One connects to my home wifi fine, the other will not "join". It finds the wifi name and the little circle turning wheel just spins.

I have 2 iPads both the sane except for case color. One connects to my home wifi fine, the other will not "join". It finds the wifi name and the little circle turning wheel just spins. I have tried about ten different "fixes" none work.. Reboot, forget wifi, etc.
Unplugged wifi on and on for about an hour.
I have compared settings between the two and cannot see any difference.
Both iPads worked fine last week. One made a trip to MI and used cellular access just fine. Now that one still uses cellular OK, but refuses to "join" the wifi.
Too bad I can't attach a picture.
Anyone care to offer a unique workable solution I have not tried?
Thanks
WD9HIK

Have you tried renewing the lease in the WiFi settings? Settings>WiFi>Your network name>Tap the blue arrow>Renew Lease. If you haven't tried that - try it first before reading the information about restoring the iOS software.
Follow the instructions in here. If you are unsure about anything - do not proceed. Post back with questions first.
iTunes: Restoring iOS software - Apple - Support
Make sure that you transfer all purchases, backup the iPad and sync with iTunes first. When you restore to factory settings, iTunes should ask if you want to backup first, but it will not hurt to initiate a backup on your won before you even start the restore process.
How to transfer purchases into your iTunes library
http://support.apple.com/kb/HT1848
How to backup and restore from a backup
http://support.apple.com/kb/HT1766

It works perfectly fine in all wifi networks except for one

Hi everybody!
I have a black macbook from 2007. It works perfectly fine in all wifi networks except for one. It´s a new network, a much faster one they say, that has been installed where I work. It works perfectly fine in my home wifi network and in every other that I have tried to date. It´s just this one.
Might it be that this new, faster wifi freezes the laptop? any experts that can shed some light?

Do you have a case on it?
If so, take it off.
If not, probably an issue with the camera itself so get the iPad replaced.

Is it possible to use the same Switch for two different clusters.

I have 10g Rac setup on windows.
Now I am planning to install 11gR2 on different servers.
Is it possible to use the same Switch for two different clusters.

user9198027 wrote:
I have 10g Rac setup on windows.
Now I am planning to install 11gR2 on different servers.
Is it possible to use the same Switch for two different clusters.
Yes. Technically there will not be any conflict as long as the private addresses used by the 2 clusters do not collide, and provided that the switch's port capacity and bandwidth will not be exceeded.
Your NA (netadmin) can also configure the switch to separate the 2 Interconnects from one another (called partitioning when using Infiniband) - if the switch supports such features.
A major consideration is not to make the switch, public. That typically cause a range of problems and can have a serious impact on an Interconnect. But using 2 private networks on the same infrastructure should not have the same problems - if configured and implemented correctly.

Does a mixed N and G network make the network slower for the N-enabled?

Hello all,
I was just admiring my Airport Extreme box after registering it, and I noticed this bit of fine print:
"Speed and range will be less if an 802.11a/b/g product joins the network."
Does this mean that my 802.11g printer makes the network slower for my two 802.11n macbooks?

Okay,
For a follow up: I'm using the "guest" network for all my G-level wireless devices, and the regular network from all my N devices.
Does that overcome the mixed network limitations? It seems like it wouldn't - because the Airport is basically creating two virtual networks out of one network. Or are there two individual networks on the Airport?
Thanks!

What are the network requirements for the Remote Panel Server?

What are the network requirements for the Remote Panel Server?
I've been trying for a while now to setup a Remote Panel. I can connect to my computers remote panel from other computers on my LAN but nowhere else.
When ever I use the web publishing tool it gives me a URL in this format: http://Computer-Name.Corporate-Name.local:8086/VI-Name.html Apparently this means I have a local DNS server and this URL has no meaning from the public.
When I try connecting with the Operate>>Connect to Remote Panel..., I get this error message:
"Connecting to remote panel server...
Remote panel connection refused by specified server: Make sure LabVIEW Web Server is enabled on specified server"
I got the same error when I tried to host a remote panel from my laptop at home, on my Wi-Fi. Is there some network or firewall setting I'm not seting? Could it be my server or router or private network?
My goal is to be able to host Remote Panels from my laptop while I am travailing internationally, by using 4G mobile internet. Is that even passable?
Solved!
Go to Solution.

Over_Nyquest
Have you enabled the Remote Panel Server in the Web Server options on the server?
Kyle B | Product Support Engineer | ni.com/support

I purchased Creative Cloud for two computers. OK on first one. The second one

I purchased Creative Cloud for two computers. OK on first one. The second one
asks for a serial number?...All I have is an order Number: C0128012167.
How can you help me? Please! Right now I have half of what I purchased!!!

Hi JrBieb33,
Please follow the steps suggested in the below link and that should help you.
http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
Thanks
Manish

Hi, I have a Powermac with Mavericks and an iPhone 5S. I just recently switched from Verizon with unlimited downloads to limited of 500mb per month. I just purchased a Powerlink Outdoor Plus which is supposed to increase the network range for over 1 mile

Hi, I have a Powermac with Mavericks and a recently purchased iPhone 5S. I just switched from Verizon with unlimited downloads to limited of 500mb per month, so I purchased a Powerlink Outdoor Plus which is supposed to increase the network range for over 1 mile. I am still getting the same distance range with my iPhone with the Verizon router. I was wondering if I need to make adjustments in the Network Settings. Does anyone know about this particular subject?
Thanks,
Kevin

Okay, I'll admit I don't know much about your configuration. A standard cellular package for a cellphone means you get your signal from a tower somewhere. It won't have anything to do with a router which will be a WiFi connection from a router. If you're talking about that, the Powerlink appears to be a directional antenna. You should get better transmission/reception in the direction it is pointed, but likely worse in other directions than if you were using an omnidirectional antenna. I presume you have it all hooked up correctly so the router is actually using the Powerlink antenna.
By the way, those distance ratings are always exaggerated. Maybe you'd get 1 mile if there was only dry air between you and the antenna and no trees, buildings, etc., and that would probably be just barely getting a signal. You should see improvement but don't go to a coffeeshop 1 mile away in a city and expect to see your router. We have a directional antenna on the roof of our house that looks like a satellite dish and I barely pick up the wireless service node a block away (with apartment buildings in between). Thre may also be a difference between using it to send a signal and receiving a signal. You might even need two, one at each end, to get 1 mile.

Recently, U2 music appeared on my ipod without my requesting it or wanting it. I was able to delete all of the songs except for one. How do I delete the last one from my ipod? The song does not show up in iTunes when I plug my ipod into the computer.

Recently, U2 music appeared on my ipod without my requesting it or wanting it. I was able to delete all of the songs except for one. How do I delete the last one from my ipod? The song does not show up in iTunes when I plug my ipod into the computer. The version installed on my ipod is 7.1.2(11D257).

Hi donfrommars,
Welcome to the Apple Support Communities!
Please use the following article for information and instruction on deleting the U2 album from your devices and account.
Remove iTunes gift album "Songs of Innocence" from your iTunes music library and purchases
Have a great day,
Joe

How to have two seperate Itunes on the same computer for two Ipods?

Is there a way to have two separate Itunes downloaded on the same computer for two different Ipods? My sister got a new Ipod and she wants to hook it up to the computer but when ever she does it just pulls up my Itunes and has all of my songs on there. How can we each have our own Itunes?

There's many ways to accomplish this. You could create two accounts in Windows. That way everything is completely separate. Or, you could manually manage your music in iTunes -- this way it won't automatically sync your music onto her iPod. More info here:
http://docs.info.apple.com/article.html?artnum=61148
http://docs.info.apple.com/article.html?artnum=93779

NO internet in the network except for two computers after installing ASA 5505

Similar Messages

Maybe you are looking for