No internet on Windows 7 Ultimate, already installed drivers and repaired them, but I cannot connect to my university's Wi-Fi. What do I do?

Hello, like I said, I've already used bootcamp to get Windows 7, however I can't connect to the internet.
I've installed the drivers, and even repaired the drivers but I don't know what to do now. Nothing seems to have worked.

You may want to edit your name from screen shots in the future.
On W7, you have a higher version (6.30.223.215) of the 802.11n driver compared to what I have on W8.1 (5.106.199.1).
This is from bootcamp.xml file
<Name>Broadcom 802.11 Network Adapter Driver
<InfName>bcmwl6.inf</InfName>
<Class>Net</Class>
<ClassGUID> {4d36e972-e325-11ce-bfc1-08002be10318}</ClassGUID>
<CatalogFile>BCM43XX64.CAT</CatalogFile>
<Provider>Broadcom</Provider>
<DriverVer>11/13/2012, 5.106.199.1</DriverVer>
<ServiceBinary>bcmwl5.sys</ServiceBinary>
<HardwareID></HardwareID>
<isX64>Both</isX64>
</Name>
Can you check the USB that you built with BC Assistant or manually from Bootcamp downloads to see what you have?
For my model, using System requirements to install Windows on your Mac via Boot Camp - Apple Support, I get Boot Camp Support Software 5.1.5621.

Similar Messages

Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro

Hi Everyone,
Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro.
The bootcamp drivers have been downloaded from apple's website. Filename: BootCamp5.0.5033
I have a iMac 27" late 2013 model.
NOTE: I have downloaded the drivers manually from apples support site as the bootcamp wizard fails third of the way through the download.
Appreciate any assistance.
Regards,
asdutoit

There is a missing point in this thread, and it is that the Boot Camp drivers for the Late 2013 iMac can only be downloaded from Boot Camp Assistant. The Boot Camp drivers available in the Apple site are not compatible with that iMac.
Delete the Boot Camp drivers from the USB drive, open Boot Camp Assistant and try to download the Boot Camp drivers again. If you get a message telling you that they could not be downloaded, I would try reinstalling OS X through OS X Recovery, by holding down Command and R keys while your Mac is starting up

Windows 7 not install in Dell Inspiron 3531. windows 8.1 already install

Windows 7 not install in Dell Inspiron 3531. windows 8.1 already install. please guide me

Can't get you...Do you like to install Windows 7 on Dell Inspiron 3531 which has Windows 8.1 installed? or, you like to have both Windows 7 as well as Windows 81.?
S.Sengupta, Windows Entertainment and Connected Home MVP

Is it possible to install Windows 7 without using BCA to install drivers and using the support 5 software for drivers on my iMac 2014?

What I am wondering is if I can install Windows 7 on my iMac 2014 without using BCA to install drivers and using the manual download Support software without bricking my system. The issue is that I recently moved into the country without a reliable data connection, so I'd like to download all the drivers from when I'm in town generally. Any info is appreciated.

Mikhailov wrote:
Hello,
I'm trying to purchase inexpensive computers for my classroom. One of the computers I'm looking at is the new $200 HP Stream 11. My school's IT department said it might be difficult to install the district's copy of Windows 7 on these computers if I purchase them. Does anyone know if it's actually possible to uninstall Windows 8.1 and install Windows 7 using an external USB or external CD Rom Drive? Any help would be greatly appreciated.
The District is right to say what they told you they can't install Disctrict Windows 7 on your computer because they have a license agreements with MS and doing so will violate their Terms of Agreement. And you shouldn't be asking something like that to start with. If that laptop can't install Windows 7 it then your stuck with WIndows 8 unless HP has downgrade to go back to Windows 7 on it otherwise if none exist you will not get any drivers or support for it. You best luck is to find a used Windows 7 laptop and order the HP recovery media for it and wipe it clean to factory install and register it to you and that will give you a Windows 7 maching to start with.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Cant run itunes on my windows xp,when i install it and try to open itunes,it keeps on saying "itunes cant run because some of its required files are missing. please reinstall itunes... what can i do...

cant run itunes on my windows xp,when i install it and try to open itunes,it keeps on saying "itunes cant run because some of its required files are missing. please reinstall itunes... what can i do...

You should first uninstall iTunes completely.
This is not an easy task!
Read this article on how to remove iTunes completely
http://www.howtogeek.com/howto/23959/completely-remove-itunes-and-other-apple-so ftware-from-a-windows-computer/
Then download the latest version of iTunes for your Windows Version and install it.

I already installed Lion 10.7.2 but there is not icloud on system preferences panel

I already installed Lion 10.7.2 but there is not icloud on system preferences panel. Anyone can help me please?

Try re-installing the update using the combo updater.

Hi All, I am trying to install informatica 9.1 HF 2 connecting to 11g DB. when installing Informatica, I am at the DOMAIN CREATION windows and inputting the DB connect details and for some reason, it cannot connect to the DB. The DB is running any id

Hi All,
I am trying to install informatica 9.1 HF 2 connecting to 11g DB.
when installing Informatica, I am at the DOMAIN CREATION windows and inputting the DB connect details and for some reason, it cannot connect to the DB.
The DB is running
any ideas?
the error message states:
THE CONNECTION FAILED: CORRECT THE DATABASE INFO AND TEST THE CONNECTION AGAIN..any help please
thanks

Yup, that did it.
I actually had been made aware of the patch when I downloaded CF, but for some reason I thought it was difficult to install (I thought that you could only use the installer package if you could open Administrator). IAC I downloaded the appropriate patch file, ran it and Administrator ran. There was something in the install notes about reconfiguring the websites and removing the IIS6 Management feature but I'm not going to fool with anything because right now at least CF is running.
Thanks.

Can no longer install drivers and touch screen not working anymore

I have the HP 520-1130ea all in one PC. Its a touchscreen. I have Windows 7 home premiun 64 bit operating system.
it has been working fine for the last two years and on Friday 11th april, i connected my android tablet (samsung Galaxy tab 7.0) to my pc and it could not install the drivers so my PC could not see the tablet. Last week this worked ok. I attach my tablet to my pc using a USB cable and transfer files by usb transfer. I dont use any software at all.
I have tried to reinstall the drivers for the android tablet and i get the error code that the drivers were found but they cant be installed. Access denied.
I have also tried to restore my pc to the last time everything worked ok which was just a week before the problem started, but the restore has failed on 4 occassions.
I have now deleted all updates on my PC from last week and i think I have deleted something or failed to allow something to isntall (a box popped up when i restarted the computer after the update delete which I ignored)
No my touch screen no longer works.
I plugged in an external hard drive to back up my computer and I also could not install the drivers for that too. this just happened today.
My printer is connected to my PC and that still works ok.
I have been battling with this for 4 days now and ploughed the internet for solutions and no hope in sight!
I have also tried:
1. installing optional updates. no luck there. also some of the updates failed
2. giving myself full control on the system 32 folder in windows.
I am the administrator on the PC.
HELP PLS!!!

Hi compnewbie,
Welcome to the HP Forums!
Thank you very much for your thorough post and detailed steps! I see that you are not being able to install drivers, and I would be happy to assist you!
The first suggestion I will make is to boot your computer in Safe Mode. To do this, please follow this document on Windows 7 Safe Mode. No extra software will be loaded, which will make this driver issue easier to troubleshoot. In Safe Mode, try to connect your external drive.
If you still cannot connect your external drive (or any other USB device), I recommend following this resource on Testing for Hardware Failures (Windows 7). This should help diagnose any potential hardware problems with the computer.
If you are not able to detect any hardware problems on your computer, please follow this document on Restore files from a backup.
Please re-post with the results of your troubleshooting, and I will diligently follow up with you!
Best regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

I recently installed CS4, and I can not make a connection to my website. Message an FTP error occurred and cannot make a connection to host. The remote host cannot be found.

I recently installed CS4, and I can not make a connection to my website. Message an FTP error occurred and cannot make a connection to host. The remote host cannot be found.

Open up your site definition (double-click on the site name in the File panel or choose Site > Manage Sites > Edit) and go to the Remote Info category. There, click Use Firewall (if it isn't already selected) - press Test to try the default firewall settings. If that doesn't work, click Firewall Settings. You'll see two relevant settings about 2/3 down - Firewall host and Firewall port. If Firewall port is 21, there probably is something blocking the port.
On Windows XP, you may have the Windows Firewall installed and blocking. Here's how you get to it:
To open Windows Firewall
1.
Click Start and then click Control Panel.
2.
In the control panel, click Windows Security Center.
3.
Click Windows Firewall.
Once you have that open, you'll need to set Dreamweaver as an exception to blocking:
On the Exceptions tab, click Add Program.
In the list of programs, click the name of the program (Dreamweaver) that you want to add, and then click OK. If the name of your program is not in the list of programs, click Browse to locate the Dreamweaver.exe in the Program Files folder and then click OK.
Hope this helps - Joe
Joseph Lowery
Author, Dreamweaver CS4 Bible

I installed itunes and quick time but when I try to open itunes I get a message that reads "quicktime failed to initialize (error -2096)"

I installed itunes and quick time but when I try to open itunes I get a message that reads "quicktime failed to initialize (error -2096). I have removed both itunes and quicktime from my computer and re-installed them and I still get the same message. What do I do to get itunes to work?

That one is often a compatibility mode problem. Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

Download and install drivers and patches Win XP host with Solaris 10 guest

Greetings. I would appreciate your help.
Solaris 10 successfully installed as guest on Win XP host. (Using Parallels Workstation).
Getting fatal IO error 146 (connection refused on Xserver "0.0" ... no screens found. Cannot bring up Xorg.
Research strongly suggest video adapter settings. Adapter is Mobility Radeon 9800 - not on HCL but not new either.
Since I cannot reach the Internet from Solaris, how do I download drivers and patches and transfer them to Solaris?
Thanks Again,
Sincerely,
Jerry B

http://mohamedazar.files.wordpress.com/2010/11/usb-device.png

My wifi diagnostic says I am connected, but I cannot connect to the internet (safari), iCloud Mail, or any other sites. Help?

My wifi diagnostic says I am connected, but I cannot connect to the internet (safari), iCloud Mail, or any other sites. Help?

Power cycle (turn off and on) the router. In System Preferences -> Network, under WiFi does it say Self-Assigned IP Address? Click where it says location in the network's pane of WiFi, click edit location, click the plus icon and type 'test' and press done, then press apply on the next window. Click advanced then in the preferred networks tab, make sure your wifi network is at the top of the list, if it's not then drag it to the top, on the TCP/IP tab, click renew DHCP lease, on the DNS tab, click the plus icon at the bottom left, add two new dns servers: 8.8.8.8 and 8.8.4.4, press OK, then press APPLY on the next window. restart the mac and see if it's fixed.

TS1368 My wifi works fine and I can access the store fine, but when I try to install an app, I get the message "cannot connect to iTunes store"

My wifi works fine and I can access the store fine, but when I try to install an app, I get the message "cannot connect to iTunes store"

I am guessing there is an issue with the store right now considering so many people are having the same problem on different platforms. I can't access it with my iPod Touch 4th Gen, yet my wifi is working and I can access the internet using other apps, but when I go to update a couple of apps from the iPod, I get the same error message after I try to sign in to the store.

IPhone 3G plugged into PC(Windows 7) 'USB is Not Recognized' and unable to restore; stuck on 'Connect to iTunes'

iPhone 3G plugged into PC(Windows 7) 'USB is Not Recognized' and unable to restore; stuck on 'Connect to iTunes'
I was in the process of putting another firmware for my iPhone(an .ipsw via. itunes) and the house had a power cut. The computer was in the middle of restoring the iPhone but never finished. The apple logo came on and then came onto the 'connect to itunes' screen. My sim card was in but there is no option to slide for emergency. When I Plug it into my computer, a message pops up saying that the 'USB Device Not Recognized', I've tried to plugging my iPhone into my laptop and other Computers but the same message occurs (all windows 7). Other articles say that the error is with the iPhone, I need help!! Can anybody offer some advice on what to do?
oh yeah, bit tight so not willing to spend any money;-)

Apple support:
Network Printer Troubleshooting
Reset Printing System

Cann't install up to date update Lion 10.7 cancel during install error: damaged by download but it's download without errors 1,34 GB. What can I do has anyone a solution to solve this issue?

cann't install up to date update Lion 10.7 cancel during install error: damaged by download but it's download without errors 1,34 GB. What can I do has anyone a solution to solve this issue?

I wish I fully understood your post, but perhaps you should try re-downloading. Are you trying to download the 10.7.3 update? If so, then try downloading OS X Lion Update 10.7.3 (Client Combo).

No internet on Windows 7 Ultimate, already installed drivers and repaired them, but I cannot connect to my university's Wi-Fi. What do I do?

Similar Messages

Maybe you are looking for