No iProc after clone

Hi.
Following a recent clone , the sysadmin user has no iProc responsibilty listed at login page.
I have raised an SR for this but just wanted to open it to the floor anyway.
Cheers!
DA

Dan,
Check if this responsibility is end-dated or not.
Run the following concurrent programs, bounce Apache, and check then.
- "Sync responsibility role data into the WF table."
- "Synchronize WF LOCAL tables"
- "Workflow Directory Services User/Role Validation"
Responsibility not appearing
Re: Responsibility not appearing
User can not see responsibility
Re: User can not see responsibility
Regards,
Hussein

Similar Messages

Apache service doesnt start after clone

Hi
we have a cloned environment and after clone finished successfully (as mentioned in logs ) , Apache service doesn't start at all while all other services are started successfully
andwhen i issued adapcctl.cmd it resulted error status 2 . i think this might help .
E:\oracle\testcomn\admin\scripts\TEST_oratestapp>adapcctl.cmd start
ECHO is off.
ECHO is off.
Tue 01/03/2012 01:54 PM
Starting Oracle Apache Server TEST_oratestapp ...
The Oracle Apache Server TEST_oratestapp service is starting.
The Oracle Apache Server TEST_oratestapp service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
adapcctl.cmd exiting with status 2
E:\oracle\testcomn\admin\scripts\TEST_oratestapp>
Apps Version : 11.5.10.2 CU2
DB : 10.2.0.4
OS : Windows server 2003 SP2
Regards
Ahmed

we have a cloned environment and after clone finished successfully (as mentioned in logs ) , Apache service doesn't start at all while all other services are started successfully
andwhen i issued adapcctl.cmd it resulted error status 2 . i think this might help .Please check Apache log files as well as startup log file for details about the error.
Did AutoConfig complete successfully?
Thanks,
Hussein

Path wrong after clone

Hi:
After clone (12.1.3 on linux), I see a link still poiting to prod.
$emctl cleastate agent
/u01/orcldb/tech_st/11.1.7/bin/emctl: line 376: /u01/proddb/tech_st/11.1.7/perl/bin/perl: No such file or directory
I'v included the /u01/orcldb/tech_st/11.1.7/bin in the PATH. Please tell me how to fix it
Thank you for your help.

$ which perl
/u01/orcldb/tech_st/11.1.7/perl/bin/perl
$ cd $ORACLE_HOME
$ find . -name perl
./perl/bin/perlPlease verify that "/u01/proddb/tech_st/11.1.7/perl/bin/perl exists as the error message in your first post shows "u01/orcldb/tech_st/11.1.7/bin/emctl: line 376: /u01/proddb/tech_st/11.1.7/perl/bin/perl: No such file or directory".
Thanks,
Hussein

HTTP_SERVER not coming up after clone

After clone on Linux 6 64 bit HTTP_SERVER not coming up
[oracle@CHNMCT297942D scripts]$ ./adopmnctl.sh status
You are running adopmnctl.sh version 120.6.12010000.5
Checking status of OPMN managed processes...
Processes in Instance: VISEND_chnmct297942d.chnmct297942d.ad.infosys.com
---------------------------------+--------------------+---------+---------
ias-component                    | process-type       |     pid | status
---------------------------------+--------------------+---------+---------
OC4JGroup:default_group          | OC4J:oafm          |   32072 | Alive
OC4JGroup:default_group          | OC4J:forms         |   32001 | Alive
OC4JGroup:default_group          | OC4J:oacore        |   31867 | Alive
HTTP_Server                      | HTTP_Server        |     N/A | Down
adopmnctl.sh: exiting with status 0
HTTP_Server~1.log says
13/09/06 11:29:53 Start process
/home/oracle/application/inst/apps/VISEND_chnmct297942d/ora/10.1.3/Apache/Apache/bin/apachectl startssl: execing httpd
fopen: No such file or directory
httpd: could not open document config file /home/oracle/application/inst/apps/VISEND_chnmct297942d/ora/10.1.3/Apache/Apache/conf/endeca.conf
Not able to troubleshoot further.

Please find below
Invalid objects
OBJECT_TYPE           COUNT(*)
PACKAGE BODY               228
MATERIALIZED VIEW            1
JAVA CLASS                 256
JAVA SOURCE                  1
SYNONYM                      4
TABLE                        3
6 rows selected.
Apache access_log.1378684800
127.0.0.1 - - [09/Sep/2013:19:55:34 +0530] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [09/Sep/2013:19:55:54 +0530] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [09/Sep/2013:19:56:14 +0530] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [09/Sep/2013:19:56:34 +0530] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
$LOG_HOME/10.1.3/opmn/oafm_default_group_1/oafmstd.err
13/09/09 18:18:26 Error: <connector name="AppsSOAAdapter" path="AppsSOAAdapter.rar" /> will not be bootstrapped since corresponding module declaration was not found in application.xml.
13/09/09 18:18:26 Error: <connector name="OracleASjms" path="OracleASjms.rar" /> will not be bootstrapped since corresponding module declaration was not found in application.xml.
13/09/09 18:52:54 Error: <connector name="AppsSOAAdapter" path="AppsSOAAdapter.rar" /> will not be bootstrapped since corresponding module declaration was not found in application.xml.
13/09/09 18:52:54 Error: <connector name="OracleASjms" path="OracleASjms.rar" /> will not be bootstrapped since corresponding module declaration was not found in application.xml.
13/09/09 18:52:54 Error: <connector name="AppsSOAAdapter" path="AppsSOAAdapter.rar" /> will not be bootstrapped since corresponding module declaration was not found in application.xml.
13/09/09 18:52:54 Error: <connector name="OracleASjms" path="OracleASjms.rar" /> will not be bootstrapped since corresponding module declaration was not found in application.xml.
$LOG_HOME/10.1.3/opmn/oafm_default_group_1/oafmstd.out
13/09/09 18:53:00 INFO: SecuritySensitive.lookupException password is not available for indirect password via application context (user: ASADMIN)
13/09/09 18:53:01 SEVERE: ApplicationStateRunning.initConnector Error occurred initializing connectors. Exception is: Exception creating connection pool. Exception: oracle.oc4j.sql.DataSourceException: Exception setting the property 'dbcFile' on the DataSource. Exception: java.lang.reflect.InvocationTargetException
13/09/09 18:53:01 SEVERE: ApplicationStateRunning.initConnector Stack trace: oracle.oc4j.sql.DataSourceException: Exception creating connection pool. Exception: oracle.oc4j.sql.DataSourceException: Exception setting the property 'dbcFile' on the DataSource. Exception: java.lang.reflect.InvocationTargetException
        at com.evermind.server.ApplicationStateRunning.initDataSourceConnectionPool(ApplicationStateRunning.java:2142)
        at com.evermind.server.ApplicationStateRunning.initDataSourceConnector(ApplicationStateRunning.java:2085)
        at com.evermind.server.ApplicationStateRunning.initConnector(ApplicationStateRunning.java:1317)
        at com.evermind.server.ApplicationStateRunning.initConnectors(ApplicationStateRunning.java:366)
        at com.evermind.server.ApplicationStateRunning.initializeApplication(ApplicationStateRunning.java:224)
        at com.evermind.server.Application.setConfig(Application.java:460)
        at com.evermind.server.Application.setConfig(Application.java:361)
        at com.evermind.server.ApplicationServer.addApplication(ApplicationServer.java:1919)
        at com.evermind.server.ApplicationServer.initializeDeployedApplications(ApplicationServer.java:1667)
        at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1050)
        at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
        at java.lang.Thread.run(Thread.java:619)
Caused by: javax.resource.ResourceException: oracle.oc4j.sql.DataSourceException: Exception setting the property 'dbcFile' on the DataSource. Exception: java.lang.reflect.InvocationTargetException
        at oracle.oc4j.sql.spi.ResourceAdapterImpl.createDataSourceConnectionPool(ResourceAdapterImpl.java:104)
        at oracle.oc4j.sql.DataSourceUtils.getDataSourceConnectionPool(DataSourceUtils.java:325)
        at com.evermind.server.ApplicationStateRunning.initDataSourceConnectionPool(ApplicationStateRunning.java:2121)
        ... 11 more
Caused by: oracle.oc4j.sql.DataSourceException: Exception setting the property 'dbcFile' on the DataSource. Exception: java.lang.reflect.InvocationTargetException
        at oracle.oc4j.sql.DataSourceUtils.setProperties(DataSourceUtils.java:123)
        at oracle.oc4j.sql.config.DataSourceConfigUtils.createConnectionFactory(DataSourceConfigUtils.java:338)
        at oracle.oc4j.sql.DataSourceConnectionPoolImpl.<init>(DataSourceConnectionPoolImpl.java:108)
        at oracle.oc4j.sql.spi.ResourceAdapterImpl.createDataSourceConnectionPool(ResourceAdapterImpl.java:99)
        ... 13 more
13/09/09 18:53:01 Oracle Containers for J2EE 10g (10.1.3.5.0) initialized
$LOG_HOME/ora/10.1.3/opmn/HTTP_Server~1.log
13/09/09 18:14:19 Stop process
/home/oracle/application/inst/apps/VISEND_chnmct297942d/ora/10.1.3/Apache/Apache/bin/apachectl stop: httpd stopped
13/09/09 18:18:10 Start process
/home/oracle/application/inst/apps/VISEND_chnmct297942d/ora/10.1.3/Apache/Apache/bin/apachectl startssl: execing httpd
13/09/09 18:21:52 Stop process
/home/oracle/application/inst/apps/VISEND_chnmct297942d/ora/10.1.3/Apache/Apache/bin/apachectl stop: httpd stopped
13/09/09 18:52:32 Start process
/home/oracle/application/inst/apps/VISEND_chnmct297942d/ora/10.1.3/Apache/Apache/bin/apachectl startssl: execing httpd

Adautoconfig.cmd failed in windows after clone

Dear all,
i am facing a problem while after clone autoconfig in windows enviorment.Any one have any idea about this,, ?!?!? :(
Context Value Management will now update the Context file
Exception in thread "main" java.lang.NoClassDefFoundError: java/sql/Savepoint
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:488)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:10
6)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:243)
at java.net.URLClassLoader.access$100(URLClassLoader.java:51)
at java.net.URLClassLoader$1.run(URLClassLoader.java:190)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:183)
at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:288)
at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:310)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.ja
va:551)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:351)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:172)
at oracle.apps.ad.util.DBUtil.getConnectionUsingSID(DBUtil.java:253)
at oracle.apps.ad.util.DBUtil.getConnection(DBUtil.java:410)
at oracle.apps.ad.util.DBUtil.getConnectionUsingAppsJDBCConnector(DBUtil
.java:590)
at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.getDBConnection(
FileSysDBCtxMerge.java:760)
at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.initializeParams
(FileSysDBCtxMerge.java:147)
at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.setParams(FileSy
sDBCtxMerge.java:128)
at oracle.apps.ad.context.CtxValueMgt.mergeCustomInFiles(CtxValueMgt.jav
a:1762)
at oracle.apps.ad.context.CtxValueMgt.processCtxFile(CtxValueMgt.java:15
79)
at oracle.apps.ad.context.CtxValueMgt.main(CtxValueMgt.java:709)
Error returned from java. Context Value Management was aborted
ERROR: Context Value Management Failed.
Terminate.
The logfile for this session is located at:
f:\oracle\prodappl\admin\TEST_ppclone5db\log\11110958\adconfig.log
F:\oracle\prodcomn\admin\scripts\TEST_ppclone5db>
Thanks
Abdul

Hi,
There is no point in creating duplicate threads, just update the original one.
As mentioned in the other thread, please log a SR and this issue is not reported in MOS website. And, if I understand you correctly you mentioned that you have all OS pre-req. software and packages installed, so the best action would be logging a SR.
Thanks,
Hussein

Update sql statement after clone

Hi:
I am sorry to bother you but this is the only place I know I can get an answer. I was asked to update a profile (EBS 12.1.3, 11.1.7 db, Linux) after clone from the following select statement below: (this is to update the outbound directory from prod to no-prod after clone).
select b.OUTBOUND_PMT_FILE_DIRECTORY
from IBY_SYS_PMT_PROFILES_TL tl
,IBY_SYS_PMT_PROFILES_B b
where system_profile_name in ('UXS US Bank','UXS Wire US Bank')
and b.system_profile_code = tl.system_profile_code;
I tried but got error: "ORA-01427: single-row subquery returns more than one row". This statment retures two rows. I don't know how to fix it.
Thank you in advance for helping me.

870765 wrote:
Hi:
I am sorry to bother you but this is the only place I know I can get an answer. I was asked to update a profile (EBS 12.1.3, 11.1.7 db, Linux) after clone from the following select statement below: (this is to update the outbound directory from prod to no-prod after clone).
select b.OUTBOUND_PMT_FILE_DIRECTORY
from IBY_SYS_PMT_PROFILES_TL tl
,IBY_SYS_PMT_PROFILES_B b
where system_profile_name in ('UXS US Bank','UXS Wire US Bank')
and b.system_profile_code = tl.system_profile_code;
I tried but got error: "ORA-01427: single-row subquery returns more than one row". This statment retures two rows. I don't know how to fix it.
Thank you in advance for helping me.Are you referring to System Profile options (System Administrator > Profile > System)? If yes, please use FND_PROFILE API to update such profile options.
How to Change Profile Option Value Without Forms? [ID 943710.1]
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=FND_PROFILE&c_owner=APPS&c_type=PACKAGE
Thanks,
Hussein

Target node/queue unavailable after clone

Target node/queue unavailable error after clone.
All nodes are updated (accordingly to the structure) in fnd_nodes
Please help
EBS 11.5.10.2
DB 9.2.0.8.0

Hi;
Acc to this note the cause is "FND_NODES was not populated correctly. " after a node was added. This issue is just coming after a clone and the table FND_NODES is updated properly.1. What is exact error you are hitting?
2. Did you run autoconfig on db tier than apps tier(services should be down)
If yes any error?
Regard
Helios

Concurrent Manger not startted after clone in apps 11i

Hi All,
After clone refresh concurrent managers are not started. The value of concurrent_queue_name, node_name is not correct in table fnd_concurrent_queues table.
O/P of the queries
SQL> SELECT trigger_name , status FROM user_triggers WHERE table_name = 'FND_NODES' ;
TRIGGER_NAME STATUS
UPNAME ENABLED
FNDSM ENABLED
SQL> select concurrent_queue_name, node_name from fnd_concurrent_queues where manager_type=6;
CONCURRENT_QUEUE_NAME NODE_NAME
FNDSM_CLONEAPPL CLONEAPPL
FNDSM_PRODDB PRODDB
FNDSM_PRODAPPL PRODAPPL
FNDSM_AUTHENTICATION AUTHENTICATION
It would contain value as clonedb instead of proddb. can i manually edit this table and retest the issue?
Please any suggestions will be greatly appreciated.
Thanks in Advance.

Hi,
Can you find any errors in the CM log file?
Please follow the steps in (Note: 391406.1 - How to get a clean Autoconfig Environment) to clean FND_NODES table and run AutoConfig on the database and the application tier nodes, and check then. You may also run cmclean.sql (Note: 134007.1 )once AutoConfig is done and before starting the CM.
Regards,
Hussein

Retain responsibilities after clone

Hi All,
My requirement is to retain all the responsibilities of all users in a cloned instance as how they are before clone.
I am on 12.1.3 . I think I can do it by export/import of some tables or using FNDLOAD . I am looking to find the easiest way to do so , any suggestions are of great help.

I am not sure if i am getting you...
I need to retain the responsibilities at target as how they are before clone. same resp will be their in system after clone too..cloning means same data..in oracle everything is in form of data stored in tables so if data is not changed then how will resp be?
I am sorry if i am not getting you...pls give a example if possible.
Thanks,
JD

FND_CONC_CLONE.SETUP_CLEAN HANGS after clone

Hi,
After clone to clean the fnd tables.
we executed FND_CONC_CLONE.SETUP_CLEAN . But it seems to be hang.
Sufficient space in tablespaces and file system is also having space.
No locks in database as well.
Env is 12.0.4 and apps user is agetting locked frequently.
Please help in sorting this issue

After clone to clean the fnd tables.
we executed FND_CONC_CLONE.SETUP_CLEAN . But it seems to be hang.
Sufficient space in tablespaces and file system is also having space.
No locks in database as well.
Env is 12.0.4 and apps user is agetting locked frequently.
Please help in sorting this issuePlease do the following:
- Stop the CM (and the application services)
- Restart the Database
- Run the script as apps user and see if it works or not
Thanks,
Hussein

Grid control not working after clone

Hi:
After ebs 12.1.3 on linux clone, I found grid control doesn't work. Database is 11.1.0.7. Don't know if it worked before or not. I managered to start up the agent, secured the agent, upload agent. From the grid control, I can see the host is up, but the database on that server is down. on the database page, Host name is there, but the Port, SID Oracle Home are all blank. I tried agent resync and got errors like below:
====
Agent Operation completed with errors. For those targets that could not be saved, please go to the target's monitoring configuration page to save them. All other targets have been saved successfully. Agent has not been unblocked.
Error saving target ORCL_server1:oracle_database - target {ORCL_server1, oracle_database} is broken: cannot compute dynamic properties in time.
Error saving collections for target +ASM_server1:osm_instance -
Error saving collections for target ORCL_server1:oracle_listener - oracle.sysman.emSDK.emd.comm.SetCollectionException: internal error
Error saving collections for target ORCL_WEBOH__Application_orcl_tech_st_10_1_3.server2:oc4j - oracle.sysman.emSDK.emd.comm.SetCollectionException: internal error
====
Please advice.

Is this a RAC database?
I tried agent resync and got errors like belowWhat is the command you used?
Error saving target ORCL_server1:oracle_database - target {ORCL_server1, oracle_database} is broken: cannot compute dynamic properties in timeHave you reviewed these docs?
Target {database instance, oracle_database} is broken: cannot compute dynamic properties in time [ID 739993.1]
"cannot compute dynamic properties in time" errors in dbconsole [ID 1121586.1]
Target {clusterName, CLUSTER} Is Broken: Cannot Compute Dynamic Properties In Time. [ID 559362.1]
Listener target is broken cannot compute dynamic properties in time. [ID 1450615.1]
Thanks,
Hussein

Problem with FIMSynchronizationService after clone

After cloning an environment and using cliconfg to point to a new database server and using stsadm to rename the application server, the cloned Sharepoint environment isnt working. Trying to access central admin I get a 503 Service unavailable. The
application pool for the SecurityServiceTokenApplication crashes along with central admin, I see the following in event logs.
The following services are managed by SharePoint, but their running state does not match what SharePoint expects: FIMSynchronizationService.
Also:
The server encountered an unexpected error and stopped.
"BAIL: MMS(1588): storeimp.cpp(5896): 0x8023060d (The computer_id in the database does not match this computer.)
BAIL: MMS(1588): storeimp.cpp(482): 0x8023060d (The computer_id in the database does not match this computer.)
BAIL: MMS(1588): server.cpp(388): 0x8023060d (The computer_id in the database does not match this computer.)
BAIL: MMS(1588): server.cpp(3860): 0x8023060d (The computer_id in the database does not match this computer.)
BAIL: MMS(1588): service.cpp(1539): 0x8023060d (The computer_id in the database does not match this computer.)
ERR: MMS(1588): service.cpp(988): Error creating com objects. Error code: -2145188339. This is retry number 0.
An exception occurred when trying to issue security token: The HTTP service located at http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc/actas is unavailable.
So basically there seems to be an issue with the user profile synchronization after the cloning. Any suggestions?

Cloning isn't supported with SharePoint as cloned servers will point back to the 'production' Configuration database. Unless you've isolated the clones completely from the production network, I would not proceed.
But in this case, you'd have to delete the User Profile Service App and databases, then create a new UPSA.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Scarmble data after clone

Hi All,
Does anyone has information regarding how to scramble the data after eBiz R12 cloning.
Thanks for your help.

Hi
Does anyone has information regarding how to scramble the data after eBiz R12 cloning.What do you mean? What u are asking exactly. If you took one clone its mean you have same system as your source. Its mean you can do whatever you want on your new clone system as what you are doing on your source system.
If you ask about performance it has some performance (if you have same hardware like cpu etc)
Please check below and see its helpful:
Note: 799735.1 - Rapid Clone Documentation Resources, Release 11i and 12
FAQ: Cloning Oracle Applications Release 11i http://ID 216664.1
Descriptive Checklist for performing Rapid Clone with 11i/R12 http://ID 811715.1
Regard
Helios

Oracle database error after clone EBS 11i.

Hi,
I am getting following error ORA-01578 message when I open forms after the cloning.
APP-FND-01564: Oracle error 1578 in fdmgrated.
But no error in database alert log file.
Clone was done by RMAN.
Oracle 10gR2 on AIX.
EBS 11i.
Thanks.

Yes, Autocofig completed without any error message.
But no errors in database alert log file.
Full error message is when I open Forms:
Cause: fdmgranted failed due to ORa-01578: Oracle data block corrupted
(file#440, block#9291)
ORA-01110: data file 440:
ORA_26040: Data block was loaded using the NOLOGGING option. please seee this
ORA-1578 / ORA-26040 Corrupt blocks by NOLOGGING - Error explanation and solution [ID 794505.1]
Handling Oracle Block Corruptions in Oracle7/8/8i/9i/10g/11g [ID 28814.1]
How to identify all the Corrupted Objects in the Database with RMAN [ID 472231.1]
OERR: ORA-1578 "ORACLE data block corrupted (file # %s, block # %s)" Master Note [ID 1578.1]
Master Note for Handling Oracle Database Corruption Issues [ID 1088018.1]
;) AppsMAsti ;)
sharing is Caring

After clone workflow notifications were not reciving users

Hi,
Workflow notifications were not reciiving by users after successfully clonned the system.
But O/s level we able to send the requests to users using mailx. cocnurrent program out & log files also recing users.
all workflow components are upa nd running. Please let me know any updates we need to change at databse level.
Environemnt : 12.1.1 running on 2 node environment. where DB on one server & apps on one server.
Thanks,
DBA
Edited by: user606944 on Mar 3, 2010 7:22 AM

Hi,
We followed the steps of metalink document. even though same issue persisting.
Please find below content of log
at oracle.apps.fnd.cp.gsc.Processor.run(Processor.java:283)
     at java.lang.Thread.run(Thread.java:619)
Caused by: org.xml.sax.SAXException: Replyto must be a valid email address
[Mar 3, 2010 6:41:54 PM AST]:1267630914824:-1:-1:kwa1hcm3:10.200.33.75:-1:-1:1:20420:SYSADMIN(0):-1:Thread[outboundThreadGroup1,5,outboundThreadGroup]:10.200.33.75:79542:1267623021142:27:UNEXPECTED:[SVC-GSM-WFMLRSVC-76884-10006 : oracle.apps.fnd.wf.mailer.NotificationFormatter.getFormattedMessages()]:Problem parsing XML -> org.xml.sax.SAXException: Replyto must be a valid email address
[Mar 3, 2010 6:41:54 PM AST]:1267630914824:-1:-1:kwa1hcm3:10.200.33.75:-1:-1:1:20420:SYSADMIN(0):-1:Thread[outboundThreadGroup1,5,outboundThreadGroup]:10.200.33.75:79542:1267623021142:27:ERROR:[SVC-GSM-WFMLRSVC-76884-10006 : oracle.apps.fnd.wf.mailer.SMTPMessageHandler.prepareMessages(String)]:FormatterException -> oracle.apps.fnd.wf.mailer.FormatterException: Problem parsing XML-> org.xml.sax.SAXException: Replyto must be a valid email address
     at oracle.apps.fnd.wf.mailer.NotificationFormatter.handleHeaderEndTag(NotificationFormatter.java:2191)
     at oracle.apps.fnd.wf.mailer.NotificationFormatter.endElement(NotificationFormatter.java:538)
     at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:210)
     at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1318)
     at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:336)
     at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:320)
     at oracle.apps.fnd.wf.mailer.NotificationFormatter.getFormattedMessages(NotificationFormatter.java:354)
     at oracle.apps.fnd.wf.mailer.SMTPMessageHandler.prepareMessages(SMTPMessageHandler.java:77)
     at oracle.apps.fnd.wf.mailer.SMTPOutboundProcessor.read(SMTPOutboundProcessor.java:732)
     at oracle.apps.fnd.cp.gsc.SvcComponentProcessor.process(SvcComponentProcessor.java:604)
     at oracle.apps.fnd.cp.gsc.Processor.run(Processor.java:283)
     at java.lang.Thread.run(Thread.java:619)
Caused by: org.xml.sax.SAXException: Replyto must be a valid email address
[Mar 3, 2010 6:41:54 PM AST]:1267630914842:-1:-1:kwa1hcm3:10.200.33.75:-1:-1:1:20420:SYSADMIN(0):-1:Thread[outboundThreadGroup1,5,outboundThreadGroup]:10.200.33.75:79542:1267623021142:27:UNEXPECTED:[SVC-GSM-WFMLRSVC-76884-10006 : oracle.apps.fnd.wf.mailer.NotificationFormatter.getFormattedMessages()]:Problem parsing XML -> org.xml.sax.SAXException: Replyto must be a valid email address
[Mar 3, 2010 6:41:54 PM AST]:1267630914842:-1:-1:kwa1hcm3:10.200.33.75:-1:-1:1:20420:SYSADMIN(0):-1:Thread[outboundThreadGroup1,5,outboundThreadGroup]:10.200.33.75:79542:1267623021142:27:ERROR:[SVC-GSM-WFMLRSVC-76884-10006 : oracle.apps.fnd.wf.mailer.SMTPMessageHandler.prepareMessages(String)]:FormatterException -> oracle.apps.fnd.wf.mailer.FormatterException: Problem parsing XML-> org.xml.sax.SAXException: Replyto must be a valid email address
     at oracle.apps.fnd.wf.mailer.NotificationFormatter.handleHeaderEndTag(NotificationFormatter.java:2191)
     at oracle.apps.fnd.wf.mailer.NotificationFormatter.endElement(NotificationFormatter.java:538)
     at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:210)
     at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1318)
     at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:336)
     at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:320)
     at oracle.apps.fnd.wf.mailer.NotificationFormatter.getFormattedMessages(NotificationFormatter.java:354)
     at oracle.apps.fnd.wf.mailer.SMTPMessageHandler.prepareMessages(SMTPMessageHandler.java:77)
     at oracle.apps.fnd.wf.mailer.SMTPOutboundProcessor.read(SMTPOutboundProcessor.java:732)
     at oracle.apps.fnd.cp.gsc.SvcComponentProcessor.process(SvcComponentProcessor.java:604)
     at oracle.apps.fnd.cp.gsc.Processor.run(Processor.java:283)
     at java.lang.Thread.run(Thread.java:619)
any idea?

No iProc after clone

Similar Messages

Maybe you are looking for