No item category exists (Table T184L HID  V )

HI ALL
GETTING THIS ERROR WHEN CARRYING OUT MIGO FOR INBOUND DELIVERY.
PLEASE GUIDE
REGARDS
REDDY

Dear Thaman,
Kindly go through the following links
Error in GR(No item category exists (Table T184L HID V ))
http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/error-while-posting-gr-933507
hpoe it will help..
Rgds,
Kareena
Edited by: Kareena Kapoor on Apr 14, 2010 2:08 PM

Similar Messages

  • Error in GR(No item category exists (Table T184L HID  V ))

    Hi,
    While doing GR for stock material the below error appears
    No item category exists (Table T184L HID  V )
    Please help.
    Urgent.
    Points will be rewarded.
    Regards

    Hi,
    Sales View not there for the Material.
    Material Type is HIBE.
    While posting MIGO,below before saving 'DELIVERY BEING PREPARED' appears then the above error appears.
    Please reply.
    Regards

  • In MIGO  I have error."No Item Catagory exists Table T184L HID NORM V)

    Hi
    Stuck in MIGO , Po created with and  while processing MIGO I am getting the following error."No Item Catagory exists Table T184L HID NORM V)
    I am using Retail , maintained Item catagory group but still I am facing with this error ..

    Resolved the issue with  0184

  • No item category exists (Table T184L HOD V)

    Hi,
    When I'm trying to reverse a goods receipt for a PO I'm getting the error as follows.
    No item category exists (Table T184L HOD V)
    Message no. VL320
    Diagnosis
    There is no item category available in item category determination in the delivery (table T184L) for the following entries: HOD  V
    System Response
    The system does not allow further processing of this item.
    Procedure
    Specify the appropriate item category for the above mentioned entries or inform your system administrator.
    This is a WM and HU managed scenario. Please advise how to overcome the error
    Regards,
    Ashwin

    You are receipting goods through inbound delivery right ?.Please maintain below missing configuraion against your delivery type.
    SPRO>Logistics Execution>Shipping>Deliveries>Define Item Category Determination in Deliveries.
    Maintain  here  HOD V then you can do receipt.

  • Error while creating I/B delivery: No item category exists (Table T184L EL)

    Hello all,
    When I save output type "SPED" in outbound delivery, Inbound delivery automatically gets created.
    But in this case error occured:
    "No item category exists (Table T184L EL NLAG V )"
    1. Specified material is HALB.
    2. Item Cat in MMR is NORM
    3. in Table T184 for "Delivery item Category Determination", configuration for EL NLAG V is NOT exists. But EL NORM V is exists
    4. Testing for the SAME material in Test server is PERFECT. I/B delivery created automatically. Master data in Test system is replica of Production system.
    Then where is the wrong....????
    Could any one help on this?
    Thanks
    Tushar

    Please have a look at your material. In material master there's a so called item category group (MARA-MTPOS_MARA and MVKE-MTPOS; these are on sales 2 view).
    Please compare the value in this field in the materials used in test (NORM?) and production system (NLAG?).
    This is one factor in item category determination as you can see in table T184L.
    Edited by: Csaba Szommer on Jul 19, 2010 2:18 PM

  • Error :Inbound Delivery "No item category exists (Table T184L DIG NORM V )"

    Dear Guru's,
    When I try to create an inbound Delivery for an SA i am getting the following error "No item category exists (Table T184L DIG NORM V )" . My problem is, it suppose to look for Delivery Type: EL instead of DIG. I dont know why its look for DIG, can some one point where i am making the mistake?
    I am sure that i should be looking for Delivery Type : EL and Item Category : ELN (for Delivery)
    Please advice...
    Regards,
    Kumar

    Dear Kumar ,
    Please check the itemcategory determination for the delivery type DIG in 0184 transaction for combination.
    Delivert type+Norm -
    >Itemcategory
    For Example :- DIG + NORM---->DIGN
    I hope this will help you,
    Regards,
    Murali.

  • ERROR : No item category exists (Table T184L LB VERP  )

    There is a error log "No item category exists (Table T184L LB VERP  ) " when i try to create outbound delivery to subcontractor vendor via TCode ME2O.
    I already add item category LB VERP via TCode 0184, but it still error.
    Could anyone help me please
    Thanks & Best Regards,
    Saiful arif

    Hi Arif,
    Did you define delivery item category for LB VERP record in transaction 0184?
    Regards,
    Csaba
    Edited by: Csaba Szommer on Oct 28, 2008 10:32 AM

  • While processing MIGO  "No Item Catagory exists Table T184L HID NORM V"

    Hi
    Stuck in MIGO , Po created with and  while processing MIGO I am getting the following error."No Item Catagory exists Table T184L HID NORM V)
    I am using Retail , maintained Item catagory group but still I am facing with this error ..

    Issue Solved with T Code 0184
    Edited by: SHESAGIRI.G on May 10, 2008 2:56 AM

  • Error while doing GR 561 - No item category exists (Table T184L DIG WMPP  )

    Hi,
    I am doing 561 to Finished goods St loc which is WM enabled and getting the above error.
    Question - I don't have authorization to check or change the item category. How do I receive goods to this St loc? I tried transfering stock from another location, but system does not allow that as well.
    While doing 561, system creates an inbound delivery in the background. At that time it checks for item category and fails.
    Any way I can post stock to this st loc?

    561 movment is only to be used for stock load at GO-Live date, not beyond, as its offset account is  usually  an account that is specially defined for initial inventory postings.
    Can it be that you are using decentralized WM (because of the inbound delivery) ?
    Without customizing you are not able to sove that problem, except you are using movement types that are allowed and setup well.
    Maybe you should explain why you think that you need to add stock with 561´

  • Sales order BAPI giving error - No item category available (Table T184 ...

    I am trying to create a sales order from a portal application using BAPI_SALESORDER_CREATEFROMDAT2. For certain type of materials, an error message is coming like: 
    No item category available (Table T184 ZOR NORM PSA1 ZSME) ZOR
    Error
    in VBAPKOM 000020 VBAPKOM
    Item 000030 does not exist 000030
    Sales
    document was not changed
    I have checked in vov4 and consulted SD consultant. The vov4 settings are set as below and our SD consultant says they are ok and need not be changed, as when we are creating this order in SAP, it is a success.
    ZOR NORM PSA1 ZSME
    ZOR NORM PSA2 ZSME ZSHP
    ZOR NORM PSHP ZTAX
    Now, the standard code where this error is coming is calling a function module "RV_VBAP_PSTYV_DETERMINE" which checks for the higher level item category. The material at item 10 meets the criteria, but material at item 20 fails as PSA1 does not have any such row (above) indicating higher level iteam.
    Interesting thing is when I try to create the order in SAP with these materials, it creates the order. There is also a material substitution rule in place, which also seems to be working fine.
    Debugging the standard code has not yet given any result.

    Since you had indicated the VOV4 settings, I presume, the item category ZSME is maintained under the tab "DfItC".
    On your comments,
    For certain type of materials, an error message is coming like:
    I feel, the root cause of the issue is Item Category Group in material master.  Check for those which creates an issue with the one which is running successfully.
    thanks
    G. Lakshmipathi

  • Material and item category error in inbound delivery through IDOC

    Hi,
    When processing inbound delivery through idoc from we19, iam getting 2 errors:
    1. Enter a material or an item category,
    2. No item category exists (Table T184L EL ZCBN V )
    can some please let me know how to solve this error.
    Thanks,
    Kashif

    Hi Kashif,
    You have to enter Material number in the sub-segment of E1EDP01 segment in WE19 transaction.
    Rgds,
    Kumar

  • ITEM CATEGORY PROBLEM WHILE DOING DELIVERY IN VL10B

    Hi gurus,
    I  was trying to do replenishment delievery w.r.t a stock transfer through sd route. In vl10b when i processed background delivery, it's generating n error log , which reads
    No Item category exists (Table T184 ZNL 0001 V )
    Where as in item category determination it was already there for Delivery item category
    ZNL NORM  V        ZNLN
    ZNL NORM CHSP  ZNLN
    pLEASE GUIDE

    Hi
    This is the assignment you have made
    ZNL NORM V ZNLN
    ZNL NORM CHSP ZNLN
    I believe, you have entered the Item Category in the column immediately next to Usage colum. Leave that field blank and place the item category in the colum second to Usage column and try.
    Thanks,
    Ravi

  • Item category TAK - free of charge

    Hello!
    We use item category TAK, but now face the request to send TAK items free of charge.
    Normally i would use order type FD, but this has no assigned item category for "0001 make-to-order"
    No item category available (Table T184 FD 0001  )
    Now i wonder how to continue correctly.
    In the order there's TANN as a free of charge variant for TAN
    in order type FD, there's item category KLN (only for "normal lines"!?)
    Do i need to set up a "Z"- item category or is there any standard that i don't find / understand!?
    Thanks a lot in advance for your help!
    Regards
    Markus

    Hello,
      you shoud create a Z* item category as copy of the TAK, but without billing relevance (like KLN).
    On top of that, all the customizing item-level relevant, should be the proper mix of both the items used as reference (i.e. the incompletion rule of your Z* item should have the NETWR field in the incompletion procedure).
    Best regards,
    Andrea

  • Order type and Item category group

    Can anyone tell me which is the relation between order type and Item category group from material master ??
    In fact the problem is that I have created a material and when I want to create new sales order it gives me this errror:
    "No item category available (Table T184 ZORDER ZITGR)"
    Is there a tranzaction where I can assign Item category group ZITGR to sale order type ZORDER or something like that??
    What should i do?

    Hi Dan,
    Goto T-Code VOV4 and maintain the table
    Sales Doc type + Item Category Group + Usage + Higher level Item Category = Item Category
    TA + NORM + Nil + Nil = TAN
    If you have Customized your own Document Type and Item Category Group and Item Category then give your
    Sales Doc type (ZORDER)+ Item Category Group (ZITGR)+ Usage + Higher level Item Category = Item Category (ZTAN)
    Reward if helpful
    Regards PAVAN

  • Item Category Problem

    Hi Experts,
    We are facing a problem in our production system
    (i.e) we have order created in crm and flows to r/3 system and the billing is carried out there and the status of the order in CRM should be changed to complted once the billing is complted.
    However it does not happen so for some of orders because,
    Item Category ZTAD used in ZOB2 order type is having the object type as SALES  ITEM and   which are automatically deliver relevant in CRM. In this process system look for the deliver document which is not available (our ZOB2 orders are order related billing) and the system puts the status of the order to inprogress.
    options we tried:
    a) we have created a new status profile and assigned it to the ZTAD, but on doing so the quantity of the item changes to zero
    b) we have created a new item category with object type CUSTOMER DEBIT MEMO REQUEST ITEM but could not assign it the sales document ZOB2 since it's category is SALES.
    c) we have Modified badi ORDER_SAVE to make the document complete when ever ZTAD item category is noticed in the sels order, On doing this the sales document flow is not updated.
    Can any one suggest solution for this.
    Regards
    Swaroop
    +91-9999444519

    hi,
    you are requested to check whether your item category exists in the combination of
    ZIN 0005
    with
    SALES DOCUMENT TYPE + ITEM CATEGORY + USEAGE + HIGHERLVEL IC = DEFAULT ITEM CATEGORY.
    in VOV4.
    it will not be there do your item category determinatin there and proceed.
    regards,
    balajia

Maybe you are looking for