No iView for system "SAP_ERP_DisputeManagement": object "dispute_case

Hello,
I'm trying to configure the Business Package for Dispute Management.
However I'm getting the following error when changing a dispute in the portal.
There is no iView available for system "SAP_ERP_DisputeManagement": object "dispute_case". For more information, contact your administrator.
I have looked in the PCD and the object dispute_case is not available. How can I get this object. I thought is was part of the business package for Dispute Management: BPERPDPM08_0-10006118.SCA
Looking forward to your reply.
Kind regards,
Joost Christenhusz

Hello Mark,
We have enhancement pack 4 active in the ERP System. The portal is running on 7.01 SP6.
But the Business Object should be in the Business Package not in de ERP system, isn't it?
Kind regards,
Joost Christenhusz

Similar Messages

MSS Work Overview issue "There is no iView available for system "SAP_ERP_HumanResources": object "employee"

Hello Expert ,
I am facing the below error when Manager clicks on the leave link under column 'Type Of Leave' . (please refer the below picture)
There is no iView available for system "SAP_ERP_HumanResources": object "employee". For more information, contact your administrator.
am I missing any configuration ?
Thanks and Regards,
Ravi

Siddharth's response and the SAP Note he mentioned were both very helpful. I received the exact same error message in a different scenario. While the fix was likely different than the one needed in this specific case, it occurs often in custom MSS and HR Admin roles and I hope this helps someone else out. In my case I needed to add the Pages shown below to my Workset and mark them as invisible.
error message:
fix in my case:
Thanks,
Ben Marsh

There is no iView available for system "SAP_ERP_Procurement": object "purch

Hi,
We are currently implementing buyer portal 1.5 in NW 7.3 SP4
Imported BP ERP05 BUYER 1.51,BP ERP05 COMMON PARTS 1.51 in server
Followed the steps given in the link
http://help.sap.com/erp2005_ehp_05/helpdata/en/10/f55f5708cb4b08816c66d48064aa35/frameset.htm
No System created for SRM as we are not connecting SRM system.
We found the following error when we click
Display Purchase Orders for Vendor Button
There is no iView available for system "SAP_ERP_Procurement": object "purchaseorder". For more information, contact your
administrator.
Document Tracing Button
There is no iView available for system "SAP_ERP_Procurement": object "purchaseorder". For more information, contact your administrator.
Regards,
Satish

Hi Satish ,
STEP 1: Login to the Portal with Content Admin Authorization.
STEP 2: Navigate to Portal Content -> Content Provided by SAP -> specialist
-> SRM7.0 -> Core -> Roles -> Open Manager and choose Navigation Folder.
STEP 3: Now navigate to Portal Content -> Content Provided by SAP ->
specialist -> SRM7.0 -> Core -> iViews -> Business Objects -> identy the business object in which ita was ont displaying ->
Select Display object ( Technical name is
com.sap.pct.srm.core.iv_display_ctr ) and right click and choose 'Add iView
to Role' -> Delta Link and save.
STEP 4: Log off and login with the user and check the issue.
Hope this will help you .
Thanks & Regards
Pradeep Kumar Dondeti

There is no iView available for system "SAP_SRM": object "Permission".

Hi All,
We have portal ( SAP 7.01 SP3 patch level 3) as the front end for SRM 7.0 ,We have integrated SRM with portal through the system alias SAP_SRM.
When RFx Approver click on u201Cpermissionu201D button in u201CPurchasingu201D -> u201CSourcingu201D-> u201CRFx Numberu201D-> u201CDisplay RFxu201D he is able to see the permission iView where he can assign technical evaluators. But when same Approver click on u201CPermissionu201D button in u201CStrategic Purchasingu201D ->u201DWork Overviewu201D in Alert tab or Task tab( Display RFx page ) is throwing the following error:
"There is no iView available for system "SAP_SRM": object "Permission". For more information, contact your administrator."
I searched in SDN forum and got few solutions and did as they suggested but my problem not yet solved.
those are:
1.     Assign Target iView (Permission iView) in u201CNavigationu201D folder of respective Role (Strategic Purchase)
2.     Make sure system Alias name as SRM_SRM.
3.     Make sure user mapping status should be ok in System Alias Editor.
4.     Should add u201CEveryoneu201D group in permission editor of System Object and make sure select u201CEnduseru201D check box and u201Cadministratoru201D as Read or full control(I selected Full control).
5.     Add u201CEveryoneu201D group in permission editor of u201Ccoreu201D folder of SRM7.0 folder.
6.     Add u201CEveryoneu201D group in permission editor of u201CPermissionu201D business object.
7.     Check the target iViews in respective Business Object (in my case u201CPermissionu201D).
8.     I updated latest patches (patch level 9) as said in SAP note: 0001386141
Anybody knows solution for this problem please let me know. Encourage point will be given to useful postingu2026
Thanks and Regards
siva

Hi Deepti,
Thank you very much for u r quick reply.
I didnu2019t create any custom roles for RFx in Portal side and SRM side also; we are using standard roles provided by SAP. I checked all the iViews which are needed for the Role (in this case u201CStrategic Purchaseu201D role) those are existed in u201CNavigationu201D folder. Should I create custom role and have to assign required iViews to that to rectify this problem?
Thanks and Regards
siva

There is no iView available for system "SAP_ERP_HumanResources": object "em

Hi Experts,
I have a search process iView . When I press on any process and press the detail button .. I get a popup screen which shows detail of the process.
On the detail screen - there is collumn called Form Steps which shows all the steps in the Process . When I click on the one of the steps I get another another browser window with the following error
There is no iView available for system "SAP_ERP_HumanResources": object "employee". For more information, contact your administrator.
I have checked in the Business Objects and in the employee object I am not sure which iView gets called when u click on the steps link
Need your help in this regards.
Regards,
Akshay ..

Hi Akshay,
We have got the same issue and now it is resolved.
1. It's a known issue and SAP is providing a solution with 7.01 SP6 release. (check sap note 1386141)
2. In order to have workaround for below SP versions, You have to deploy the par file. ("objbased.par for 7.01 SP5").
3. First, please backup the old "com.sap.portal.navigation.objbased.par" PAR file, from the file system directory:
...\j2ee\cluster\serverX\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\
deployment\temp (you will find it with a .bak suffix...)
4. Deploy the par file into your portal using the "Archive Uploader tool:
      - Navigate to 'System Administration' -> 'Support' -> 'Portal Runtime'
      -> in the "Portal Anywhere" Admin Tools section, navigate to
          'Administration Console' -> use the 'Archive Uploader' to deploy it.
5. After deploying the file, please recheck the scenario.
Thanks,
Joseph
Edited by: jo chinna on Dec 14, 2009 12:39 AM

There is no iView available for system "SAP_SRM": object "po".

Hi,
We are on SRM 7.0.
We get the below mentioned error after selecting the PO in "Purcahsing
view" and clicking on EDIT button to chnage the selected PO:
There is no iView available for system "SAP_SRM": object "po". For more
information, contact your administrator.
We are using the standard SAP portal content/roles to run the
transactions.
Please advise.

Hi,
Please confirm if you have used SAP_SRM as alias name in the portal?
Regards,
Nikhil

There is no iView available for system "SAP_SRM": object "sc". For more inf

Hello,
I'm using SRM 7.0 and i'm facing the following problem:
When we try to open an existing shopping cart:
"There is no iView available for system "SAP_SRM": object "sc". For more information, contact your administrator. "
This issue happens when a Purchaser click on any shopping cart number in the Purchasing overview screen.
It's working fine in the standard role, but i created a new role with some delta links to objects but it's not working.
I checked the permission on the system SAP_SRM and on the objects they are all:
Name: Everyone (grouoe)
Adminstrator: none
User: checked
The system alias SAP_SRM is well defined and the connection to this system works fine.
Any hint for me?
Thanks in advance,
Regards,
Thomas

It had to do with OBN.
I copied the role but deleted a folder called "Navigation". But all the iViews to wich the shopping cart needed to navigate were linked under that folder.
So just copied again the role but this time without deleting the Navigation folder...and away was the problem

There is no iView available for system "SAP_ERP_Common": object "SWF_WIOBN". For more information, contact your administrator.

Hi All
I am working on the POWL inbox in portal 7.3 sp11 .
I have used
Application Name : IBO_WDA_INBOX
Configuration Name: IBO_WDAC_POWL_INBOX
for integration into portal by using webdynpro abap iview template .
We are able to get the task and notification in powl inbox .
But when we click on task item it throwing an error .
There is no iView available for system "SAP_ERP_Common": object "SWF_WIOBN". For more information, contact your administrator.
Can you please provide me any steps how to implement the powl inbox inorder to get the UWL Tasks and notifications into this powl inbox .
And how to resolve the above error .
Thanks & Regards
Deepika

Hi Deepika,
Please go through the below SAP notes:
1854661 - The error "There is no iView available for system "XYZ", object "ABC" is encountered when navigating in an MSS or HR Administrator Portal role
1494536 - Object Based Navigation - Specific Component Note
Apart from this, you can also go through the following link:
http://wiki.scn.sap.com/wiki/display/EP/Object+Based+Navigation+-+OBN+Wiki
BR,
Anurag

There is no iView available for system "SAP_SRM": object "qte". For more information, contact your administrator.

Dear All
I am getting an error in my SRM system.
Er "There is no iView available for system "SAP_SRM": object "qte". For more information, contact your administrator."
I followed the below thread.
There is no iView available for system "SAP_SRM... | SCN
I have assigned the Iview to this role.
The same changes i have done in Development system
where it is working fine.
But in my QA system i am getting this error.
My Portal version is 7.3.
Please help with your valuable suggestion
Regards,
Prashant krishen.

Dear All
thanks for your reply.
I am able to resolve the issue.
In my case there was some parameter missing in transported object.
I followed some steps.
1) I compare the Iview property of transported object with Specialist object.
2) I found that OBN parameter was missing.
3) I include it as per above document.
4)But after that in the rfx response, iview was opening in some tab but when i was trying to open with Overview item i was getting error.
5) Than i search in portal content with *qte*
6) I found more iview in Quotation folder i added those iview in strategic purchaser in navigation folder.
This is how i am able to resolve.
Thanks everybody for you prompt answer and support

IView and system admin objects appear changed or not registered when transported

Hi,
Recently we moved a few objects - iViews, pages and roles as epa and system admin objects as config archive and imported them manually to Test system. But when checked in the next landscape, the iView properties appear different. Eg. In Development system, the iView was unchecked for visibility option i.e. iView should not be visible. But when transported to test system, the property was checked and gave error. On reimporting, the same thing happened and we had to manually correct the property. This is not an expected behaviour and manual changes are not to happen after development changes.
Similarly, though config archive import showed the 2 new system objects in the respective location of Test system, the expected functionality was not working. I checked this by deleting one of them and manually creating the same entry and it worked fine. So I also had to delete the 2nd one and create a manual entry. The system admin objects we used pertained to System Configuration --> Content Mgmt--> Form Based Publishing --> Forms Availablity --> Folder Settings
We also moved kmcs and they are reflecting properly with correct folder permissions.
We don't understand why this is so occurring (iView and system admin entry appearing different or not getting registered )and never experienced such a case in previous projects. We don't want to face the issue going forward when transporting changes to staging and Prod systems.
Please assist as to what went wrong or any probable cause and solution for same.
Thanks,
Janani

Hi,
Has anyone faced such a situation before and know the reason for same ?
Regards,
Janani

EEW customizing for system-wide object extension

Hello.
We are trying to enhance BUPA object through easy enhancement tool. We
customized EEW via EEWC transaction and we created a RFC connection to
let central system (CRM) and target system (R/3 system) to communicate
each other.
After these steps we launch EEWB transaction from CRM system by doing
the following steps:
1.We created a new project
2.We created a new extension for BUPA object, and type of
extension: Add new fields
3.At this moment Wizard is started.
4.We enter the name, enter the technical properties .
The problem appears when we try to enter SYSTEM RELEVANCE, we can´t
state in which other systems the fields of the CI Include are relevant
because only column Relevant for BW appears, and we want
enter Relevant for R/3. However the transport requests are created
system-wide what shows that the two systems are communicated.
Nevertheless, no objects are extended in the target system although the
extension is executed properly in CRM.
Could you please tell us what is due to?
Thanks in advance

Carmen,
Have you defined the R/3 system landscape in transaction EEWC. In order to define a field as R/3 relevant the corresponding R/3 systems need to be defined in the EEWC setup. However EEWB does not work with R/3 backends lower than 4.7 from past experience. If the R/3 system does not have the packages or function groups that start with OXT. You must have at least 4.7 or higher in order to use the auto-generation features for R/3.
You must also make sure you perform the post-processing steps described in the EEWB documentation(in the standard CRM help) in order to make sure the processing fully works.
Good luck,
Stephen

There is no iView available for system "SAP_ERP_Manufacturing"...

Hi out there,
I have imported the business packages Common Parts 1.2 and Maintenance Technician 1.2 in our portal testsystem (nw7, sps18). after setting up a system with alias SAP_ECC_MANUFACTURING and asigning the role com.sap.pct.erp.maintech.maintenance_technician to my super admin user I can browse through the navigation of this role and all the iviews do what they are supposed to to (e.g. I can call the "Technical Structure View" and create a notification for an object out of the list)...
When assigning the role com.sap.pct.erp.maintech.maintenance_technician to a test user (with the roles and groups from a simple enduser), I get the following error when trying to create anotification (or doing anything else in the technical structure view): There is no iView available for system "SAP_ERP_Manufacturing": object "notification".
I have checked the permissions in all relevant areas of the PCD. Everywhere there are at least read permissions for everyone. Also I have copied the iView com.sap.pct.erp.common.notification_create to another place in the PCD and added it to the operation "create" of the Business Object "SAP_ERP_Manufacturing.notification" (with the highest priority). But that didn't change anything...
Well, I don't know what else I could do to find out what's wrong. I just hope anyone out there can help me out... )
Best Regards
Juergen Kuechle.

Hi Thulasi,
sorry, but that's not the point. The system with alias "SAP_ECC_MANUFACTURING" is used to call the WD application in the R/3 backend system (which works out pretty fine). The WD application then calls back the portal using the object based navigation technology (OBN). In this case it calls the object SAP_ERP_Manufacturing.notification and tries to execute the iview linked to the action "create" of the object.
And here exactly is the problem that I'm facing. With the super admin user OBN works fine, with an enduser the OBN fails...
Regards, Juergen.

Portal error in SRM 7.0 -"There is no iView available for system "SAP_SRM"

Hi All,
We have portal ( SAP EP 7.0) as the front end for SRM 7.0 ,We have integrated SRM with portal through the system alias SAP_SRM.
With the PDP scenario the users are facing the below issue while they try to open any documents ( let it be RFx/contract).
"There is no iView available for system "SAP_SRM": object "cont". For more information, contact your administrator."
We installed the latest JRE (1.6.0.17) in the machine , but it didn't fix the problem. It appears to be a a lorcal issue with the settings in browser as some people ( very few) are able to open the documents.
Any pointers?
Thanks
Arun

Hi Arun,
Pls check the portal content and portal roles with iviews maintained properly or not.
Pls chek this page for ivew and portal role matrix. and cross check with your portal roles.
This might help you.
http://help.sap.com/saphelp_srm70/helpdata/en/27/d1185fd9764001953386c6e10058ab/frameset.htm
Regards
Kiran

Error: no iView available for system "SAP_ERP_TalentManagement":

Hi Experts,
I am getting the following error in Ehp4 E-Recruitment application.
There is no iView available for system "SAP_ERP_TalentManagement": object "talent_group". For more information, contact your administrator.
we have deployed the business package ERP05 COMMON PARTS 1.41. Still facing the error.while clicking the Assignments opens a new window shows this error message.
Anybody please show your light on this and help me solve this issue.
waiting for the repy.

First screen shot is for role level-------- > working fine
Second screen shot is for launchpad level-------- > not working.

There is no iview available for system SAP_ERP_HumanResources obj employee

Hi Experts,
I'm working on EHP4 and facing an error in ESS -> Career and Job -> Appraisal Documents -> My Appraisal Documents tab and in MSS -> Talent Management -> Performance Management -> Tasks Tab.
Whenever I click on the document icon in My Appraisal Documents tab I get the Error message " There is no iview available for system SAP_ERP_HumanResources. object "employee". For more information, contact your administrator."
In MSS the same thing happens in Task tab but the document in Employee Documents tab opens up fine.
It will be greatly appreciated if anyone can suggest how I can resolve this issue.
Regards,
Seema Rane.

Hi,
We have got the same issue and now it is resolved.
1. It's a known issue and SAP is providing a solution with 7.01 SP6 release. (check sap note 1386141)
2. In order to have workaround for below SP versions, You have to deploy the par file. ("objbased.par for 7.01 SP5").
3. First, please backup the old "com.sap.portal.navigation.objbased.par" PAR file, from the file system directory:
...\j2ee\cluster\serverX\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\
deployment\temp (you will find it with a .bak suffix...)
4. Deploy the par file into your portal using the "Archive Uploader tool:
- Navigate to 'System Administration' -> 'Support' -> 'Portal Runtime'
-> in the "Portal Anywhere" Admin Tools section, navigate to
'Administration Console' -> use the 'Archive Uploader' to deploy it.
5. After deploying the file, please recheck the scenario.
Thanks,
Joseph

No iView for system "SAP_ERP_DisputeManagement": object "dispute_case

Similar Messages

Maybe you are looking for