No job info found in SM37.

Hello,
i'm facing a strange behavior in BI system. We have a schedule via DB12 for daily backup (in TSM) and during last days for two times we have no backup. The problem is that there is no job log in SM37 for those days and also i did not found any error log in system.
Any idea???
Regards,
Dimitrios

Are DB jobs visible in SM37 up until (the day before) the jobs in question did not run? Did the job continue to run every day afterwards?
Were these DB12 jobs visable in CPS?
Could someone have deleted or the jobs manually?
Are you sure that the DB12 jobs did not run and the backup for those 2 days does not exist?

Similar Messages

Job not found in SM37

Hi Guys,
I am trying to schedule a compress job from the compress section of an infocube, but I am getting an error saying that a job with this name already exists. I have tried to find it in SM37 but to no avail. Somebody please help me as to where I can go and cancel the previous job so that I can schedule a new one. Fast reply is highly appreciated. Thanks a lot in advance.

HI,
Go to Tcode SM37.WHERE you have to select the checkboxes 1>complete 2>active3>cancel4>schedule 5>release
and select the data range from the data to todate.
It would help you
Regard's
Prasad

Where to look for reasons a job is active in sm37 but not in sm51

I have sitation a job is active in sm37 but not in sm51. What could be the reason?
What to look for.
I try to Job->Check staus in "sm37" but job still looks to be active

this is the log of still active k+job in sm37:
Date       Time     Message text                                                                                Message class Message no. Message type
17.12.2009 23:00:25 Job started                                                                                00           516          S
17.12.2009 23:00:25 Step 001 started (program RFKK_MASS_ACT_SINGLE_JOB, variant &0000000051777, user ID BVJANBO)      00           550          S

To change the Job Log Detail in SM37

Hi All,
How can I change the standard JOB LOG detail in SM37 for partical program if it runs in Background.I have foumd the Function Module(BP_JOBLOG_READ) which is used to update this JOB LOG detail.How can I edit the standard .
Kindly provide the ways .
With Thanks,
Dina.

Hi ,
Thank you for replying.
I want to update some rows in JOB LOG detail .
With Thanks,
Dina.

Error message " [RunQueryToServer] Job Not Found " while editing Schedules

Hi,
We are on BPC 7.5 NW. While trying to Edit Schedules in Datamanager , an error message is received " [RunQueryToServer] Job Not Found ". Could anyone suggest what could be the reason for the issue, is it admin rights of the user involved ?
Please do let me your suggestions.
Best Regards,
SAYAN

Message starting with Z is home made message. That means the message is designed by your organization only. You should consult with your ABAP team to check the root causes of the error message. If you know the debug process , then you can check it also by debugging. To get the details of the error message, go to SE91 and the enter class ZM and message no 303, then use the option 'where used list' to check the details used of the message.

Job Not Found Exception

AdminUI shows that the task was assigned to the user, as it says RUNNING, but, the task never showed up. This was in the log. Any explanation?
Ran the exact same workflow again, and all worked fine.
<Dec 8, 2009 3:11:14 PM EST> <Error> <com.adobe.idp.jobmanager.ejb.JobManagerBean> <000000> <JobManagerBean:onMessage:job not found:6feac24ea054c1c200000000c1cf2e2b>
<Dec 8, 2009 3:11:14 PM EST> <Error> <com.adobe.idp.jobmanager.ejb.JobManagerBean> <000000> <JobManagerBean:onMessage():Exception:com.adobe.idp.jobmanager.common.JobNotFoundExceptio n>
com.adobe.idp.jobmanager.common.JobNotFoundException
at com.adobe.idp.jobmanager.ejb.JobManagerBean.doOnMessage(JobManagerBean.java:1051)
at com.adobe.idp.jobmanager.ejb.JobManagerBean.onMessage(JobManagerBean.java:952)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:429)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:335)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:291)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4072)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:3962)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:4490)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)

These kind of problems occurs across the workflow processes. I suspect this is because of asynchronous jms calls.
I faced a problem something similar to this:
A webservice component was consuming lot of time to execute. So through the adminui, I terminated the task.
The next component (user task) in the workflow got executed twice with two different task Ids. miracle !!
Sometime i'm getting connection reset error with web service components. After a retry, it works well.
Cheers,
Nith

How to execute a active Job in T-code SM37.

Hi
How to execute a active Job in T-code SM37.
Pls help

hi,
In SM37 give the job name or user name. then in job status check only the active jobs then u can execute the job..
Subhash

No account info found. please connect to itunes to configure your account

No account info found. please connect to itunes to configure your account
is what i get when i try to open the itunes app on my ipod, and i dont know what do do, it works fine on my computer... I'ts an old ipod but I just got it, everything on it has been deleted..
does anyone know what i have to do?? xxxC

Make sure you checked ALL the information in your iTunes account, not just the credit card number.
On your computer start iTunes, go to the Store Menu on top and Deauthorize your computer then either Authorize your computer (from the same menu) or play a purchased song and when prompted enter your Apple ID and password.
Did you try a Restore and then Resync?

I have a brand-new elitebook 2740p and the battery won't charge. I have tried all info found so far

I have a brand-new elitebook 2740p and the battery won't charge. I have tried all info found so far, including info provided on this forum. I also followed the instructions in the Other Problems forum of the Notebook. How can I get my battery to charge?

See also this thread [/questions/951097] for instructions.
For forum cross referencing purposes
* Crash Report for CrashID bp-277ee840-e3b2-4977-a7cd-683db2130225
** Crash Signature: TlsGetValue
** [@TlsGetValue]
**Related Bug 830531 REOPENED --- [Win8] crash in XPC_WN_Helper_NewResolve mainly with AMD Radeon HD 6290/6310/6320/7290/7310/7340 (Wrestler Asic)

In LO Cockpit, Job contol job is cancelled in SM37

Dear All
   I am facing one problem. Pl help me to resolve that issue.
When ever I am scheduling the delta job for 03 (Application Component), that is cancelled in SM37. Hence, I couldn't retrive those data from queued delta MCEX03 (smq1 or lbwq) to RSA7 because of job is cancelled. When I have seen that job log I got below Runtime Errors. Please hep me to resolve this issue
Runtime Errors         MESSAGE_TYPE_X
Date and Time          04.10.2007 23:46:22
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Short text of error message:
Structures have changed (sy-subrc=2)
Long text of error message:
Technical information about the message:
Message class....... "MCEX"
Number.............. 194
Variable 1.......... 2
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPLMCEX" or "LMCEXU02"
"MCEX_UPDATE_03"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
Thanks in advance
Raja

LO EXTRACTION:
First Activate the Data Source from the Business Content using LBWE
For Customizing the Extract Structure LBWE
Maintaining the Extract Structure
Generating the Data Source
Once the Data Source is generated do necessary setting for
Selection
Hide
Inversion
Field Only Know in Exit
And the save the Data Source
Activate the Data Source
Using RSA6 transport the Data Source
Replicate the Data Source in SAP BW and Assign it to Info source and Activate
Running the Statistical setup to fill
the data into Set Up Tables
Go to SBIW and follow the path
We can cross check using RSA3
Go Back to SAP BW and Create the Info package and run the Initial Load
Once the Initial delta is successful before running delta load we need to set up V3 Job in SAP R/3 using LBWE.
Once the Delta is activated in SAP R/3 we can start running Delta loads in SAP BW.
Direct Delta:- In case of Direct delta LUWs are directly posted to Delta Queue (RSA7) and we extract the LUWs from Delta Queue to SAP BW by running Delta Loads. If we use Direct Delta it degrades the OLTP system performance because when LUWs are directly posted to Delta Queue (RSA7) the application is kept waiting until all the enhancement code is executed.
Queued Delta: - In case of Queued Delta LUWs are posted to Extractor queue (LBWQ), by scheduling the V3 job we move the documents from Extractor queue (LBWQ) to Delta Queue (RSA7) and we extract the LUWs from Delta Queue to SAP BW by running Delta Loads. Queued Delta is recommended by SAP it maintain the Extractor Log which us to handle the LUWs, which are missed.
V3 -> Asynchronous Background Update Method Here by seeing name itself we can understand this. I.e. it is Asynchronous Update Method with background job.
Update Methods,
a.1: (Serialized) V3 Update
b. Direct Delta
c. Queued Delta
d. Un-serialized V3 Update
Note: Before PI Release 2002.1 the only update method available was V3 Update. As of PI 2002.1 three new update methods are available because the V3 update could lead to inconsistencies under certain circumstances. As of PI 2003.1 the old V3 update will not be supported anymore.
a. Update methods: (serialized) V3
Transaction data is collected in the R/3 update tables
Data in the update tables is transferred through a periodic update process to BW Delta queue
Delta loads from BW retrieve the data from this BW Delta queue
Transaction postings lead to:
1. Records in transaction tables and in update tables
2. A periodically scheduled job transfers these postings into the BW delta queue
3. This BW Delta queue is read when a delta load is executed.
Issues:
Even though it says serialized , Correct sequence of extraction data cannot be guaranteed
V2 Update errors can lead to V3 updates never to be processed
Update methods: direct delta
Each document posting is directly transferred into the BW delta queue
Each document posting with delta extraction leads to exactly one LUW in the respective BW delta queues
Transaction postings lead to:
1. Records in transaction tables and in update tables
2. A periodically scheduled job transfers these postings into the BW delta queue
3. This BW Delta queue is read when a delta load is executed.
Pros:
Extraction is independent of V2 update
Less monitoring overhead of update data or extraction queue
Cons:
Not suitable for environments with high number of document changes
Setup and delta initialization have to be executed successfully before document postings are resumed
V1 is more heavily burdened
Update methods: queued delta
Extraction data is collected for the affected application in an extraction queue
Collective run as usual for transferring data into the BW delta queue
Transaction postings lead to:
1. Records in transaction tables and in extraction queue
2. A periodically scheduled job transfers these postings into the BW delta queue
3. This BW Delta queue is read when a delta load is executed.
Pros:
Extraction is independent of V2 update
Suitable for environments with high number of document changes
Writing to extraction queue is within V1-update: this ensures correct serialization
Downtime is reduced to running the setup
Cons:
V1 is more heavily burdened compared to V3
Administrative overhead of extraction queue
Update methods: Un-serialized V3
Extraction data for written as before into the update tables with a V3 update module
V3 collective run transfers the data to BW Delta queue
In contrast to serialized V3, the data in the updating collective run is without regard to sequence from the update tables
Transaction postings lead to:
1. Records in transaction tables and in update tables
2. A periodically scheduled job transfers these postings into the BW delta queue
3.This BW Delta queue is read when a delta load is executed.
Issues:
Only suitable for data target design for which correct sequence of changes is not important e.g. Material Movements
V2 update has to be successful
Direct Delta: With this update mode, the extraction data is transferred with each document posting directly into the BW delta queue. In doing so, each document posting with delta extraction is posted for exactly one LUW in the respective BW delta queues.
Queued Delta: With this update mode, the extraction data is collected for the affected application instead of being collected in an extraction queue, and can be transferred as usual with the V3 update by means of an updating collective run into the BW delta queue. In doing so, up to 10000 delta extractions of documents for an LUW are compressed for each Data Source into the BW delta queue, depending on the application.
Non-serialized V3 Update: With this update mode, the extraction data for the application considered is written as before into the update tables with the help of a V3 update module. They are kept there as long as the data is selected through an updating collective run and are processed. However, in contrast to the current default settings (serialized V3 update), the data in the updating collective run are thereby read without regard to sequence from the update tables and are transferred to the BW delta queue.
V1 - Synchronous update
V2 - Asynchronous update
V3 - Batch asynchronous update
These are different work processes on the application server that takes the update LUW (which may have various DB manipulation SQLs) from the running program and execute it. These are separated to optimize transaction processing capabilities.
Taking an example -
If you create/change a purchase order (me21n/me22n), when you press 'SAVE' and see a success message (PO.... changed...), the update to underlying tables EKKO/EKPO has happened (before you saw the message). This update was executed in the V1 work process.
There are some statistics collecting tables in the system which can capture data for reporting. For example, LIS table S012 stores purchasing data (it is the same data as EKKO/EKPO stored redundantly, but in a different structure to optimize reporting). Now, these tables are updated with the txn you just posted, in a V2 process. Depending on system load, this may happen a few seconds later (after you saw the success message). You can see V1/V2/V3 queues in SM12 or SM13.
V3 is specifically for BW extraction. The update LUW for these is sent to V3 but is not executed immediately. You have to schedule a job (e.g. in LBWE definitions) to process these. This is again to optimize performance.
V2 and V3 are separated from V1 as these are not as real time critical (updating statistical data). If all these updates were put together in one LUW, system performance (concurrency, locking etc) would be impacted.
Serialized V3 update is called after V2 has happened (this is how the code running these updates is written) so if you have both V2 and V3 updates from a txn, if V2 fails or is waiting, V3 will not happen yet.
hope it will helps you.....

Schduling background jobs not showing in sm37

Hi,
I scheduled the jobs : Z_MM_INVENTORY_REPORT, RM07MLBS on daily basis from 03/22/2011.Its running successfully upto 03/26/2011 daily,after that when iam checking on SM37 from 03/27/2011 to 03/31/2011 it showing schduled on 03/27/2011 not running. and remaining dates 28,29,30,31 not showing any thing(means not scheduling).
what could may be the reason for not running that jobs.
Thanku

What is the status of the Job in SM37 ?
and on
and remaining dates 28,29,30,31 not showing any thing(means not scheduling).
The periodical jobs create the next job, when the current job changes is status from Released to Active. Since your Job on 27th is having some issue, the Job for 28th has not been created, simillarly the rest.
Regards,
Sanujit

Some background jobs not shown in SM37

Dear Friends,
Some of my background jobs are not shown or visible in SM37. But, it is available in TBTCO, TBTCP & TBTCS tables. These jobs are scheduled in daily basis. These tables having records for all days of missed jobs.
I dont know, why it is not comming in SM37. I tried in many search parameters in SM37 like prog. name, date and so on.
These missed background jobs are not comes in spooler (SP01) also.
Kindy, suggest me to find out the missed background jobs.
Thanks in advance
Regards,
Rajagopal
Chennai - INDIA.

Hi rajagopalan,
Normally this should not happen. Make sure the following in sm37:
a. The start date is : 01.01.1800
b. The end date is : 31.12.9999
c. All the checkboxes (six checkboxes) are ticked.
d. username = your username
e. jobname = *
SM37 gets records from the view V_OP (containing TBTCO and TBTCP)
and filters for username using the field SDLUNAME.
So you can basically cross-check if the count is atleast correct or the jobs were of different user (fieldname in the view/table) etc. (From SM37, you can export to excel and check the count)
regards,
amit m.

Job info of the ABAP program

hi folks,
I have an ABAP program and it has been scheduled to run as a job. I need to find the info about it. Is it a weekly or monthly, what day of the week it is running? I do not know the job name just have the program name.
How can i do track the job details from the program name?
Thanks
Vinu

hi,
use :
1)fm BP_FIND_JOBS_WITH_PROGRAM
and than
2) fm BI_GET_JOB_INFO
A.
Message was edited by:
Andreas Mann

Privilege to see Scheduler Jobs info in Grid 10gR1

Does anyone know what privilege you need to see the information under the Scheduler Jobs link, without granting the DBA role? Our developers, who do not have the DBA role, can see the link but no info in that section when logged in as themselves. They can see the DBA_SCHEDULER and DBA_SCHEDULER_RUNNING_JOBS views when logged into the database, via the SELECT_CATALOG_ROLE, but there is obviously something else they need to see this info in Grid.
Thanks
Steve

See if this document on Metalink is helpful:268795.1
Does anyone know what privilege you need to see the
information under the Scheduler Jobs link, without
granting the DBA role? Our developers, who do not
have the DBA role, can see the link but no info in
that section when logged in as themselves. They can
see the DBA_SCHEDULER and DBA_SCHEDULER_RUNNING_JOBS
views when logged into the database, via the
SELECT_CATALOG_ROLE, but there is obviously something
else they need to see this info in Grid.
Thanks
Steve

Step by step periodical job info

hi gurus
i want infromation about periodical jobs.
can send the inform aio to my id
[email protected]
kishore

Hi
The transaction codes used for this are SM36, SM37.
First you have to create a variant for your job (if you want to do invoicing once in 3hours, then go to VF04, give the selection criteria and then save it as a variant)
Now go to SM36, Create a job name, go to steps, give the program name(in our case the prog name of tcode VF04, which u can find in Status link of System in the user menu.) and the variant name.
After that you can click the start condition button and mention the time and date and dont forget to click the Periodic job checkbox.
At each step, you have to save the settings.
Now after SM36, the job gets scheduled, and once in 3hours, you can go to SM37, give the job name and find out the result of the job.
Pls assign reward point if it helps.

No job info found in SM37.

Similar Messages

Maybe you are looking for