No keyboard found
For some reason my iMac has stopped finding my bluetooth keyboard. To try to fix it I have gone into System Preferences, clicked keyboard, then gone into set up Bluetooth Keyboad. At times it looks like it has found my keyboard as it names it up, but when I go the next step it is like the keyboard dissapears. I have replaced batteries (twice), turned both the keyboard off and the computer. I would welcome any suggestions others may have.
Thank you rkaufmann87. It was good to find the information you directed me to and to ensure that I had checked those things, but alas still no luck with getting the pesky keyboard working. Any other suggestions would be most welcomed.
Similar Messages
-
Wireless Keyboard - "no keyboard found"
Bluetooth says my keyboard is paired, configured, and connected (and it works). Keyboard under System Preferences says "no keyboard found" and it continues to search for the keyboard. I have rebooted and also deleted and added the keyboard. Should I be concerned ? Does the iMac need service ?
Can you confirm what type of wireless keyboard you are using? Is it the current aluminum Apple Wireless Keyboard, or one of the older versions? When you power on the keyboard what does the LED do? Does the LED blink repeatedly indicating it is in the discoverable mode even though your system apparently thinks that the keyboard is paired and connected?
Do you have access to another system that you could attempt to pair the keyboard with? You will need to delete the paired keyboard (and any other wireless keyboard pairings that are listed) as you indicated you've done previously, then shut down the current iMac to ensure that keyboard can be placed into the discoverable mode. Pair the keyboard with another system, then, if successful, reverse the process and attempt to pair the keyboard once again with your iMac. Hopefully establishing a new pairing with a different system will help resolve the cycle that you are in. You might also consider trying to rename the keyboard if you are successfull at pairing it with another system. -
Silly me. I was playing around on the settings portion of my I-Pad2, when I found the international keyboard section. I reset the keyboard to Russian to see what it would look like. Now, the keyboard is in Russian, and so are all the settings elements. I can't see how to get it all back into English. Help,
http://support.apple.com/kb/HT4051
-
Keyboard found/working - but can't get into setup in system preferences
Hi,
I've had the Apple Wireless Bluetooth Keyboard (the flat aluminum one) for about a year. It works great, but recently want to see if I could modify some keys.
Wen into System Preferences, clicked "Set Up Bluetooth Keyboard" and it just searches for the keyboard forever, but never finds it.
Weird thing is if I go into bluetooth pref pane keyboard is there and paired, and as I say works fine. I don't know if I can re-map any soft keys / function keys with this keyboard (because I can't get into prefs) but I would like to find out!
TIA...LarryHello Larry:
What are you trying to do? You can change KB shortcuts, but you cannot make a "K" key become a "Y" key.
Barry -
Possible neo platinum "no keyboard found" fix
I bought parts for 4 neo platinum systems.
1 assembled system worked, the other three had the exact same problem: they simply would not go past the post screen. No keyboards were detected on these systems.
After quite a bit of hair pulling, I finally came to realise that the motherboard CPU backplate was just BARELY making contact with the case mounting plate.
Now, to look at it, you would SWEAR that there was no way they could possibly be in contact, but on close examination, I noticed that the neo plat motherboards have a slight "bowing" effect that peaks towards the center.
I couldnt adjust the mobo, but I could damn well adjust the case. A few seconds with an 8-pound sledge rectified the shorting problem on all three cases.
The systems all run perfectly now.
Hope this helps,
PexDo you mean that the M/B would always stop at the 'Initializing keyboard controller' POST step? If so, I've just returned a board for this problem - perhaps I had the same issue. Couldn't I just put some kind of insulator behind the backplate to fix this?
Brian -
IMac on, message: no keyboard found. Make sure keyboard is discoverable.
I've tried turning on keyboard, light blinks twice and goes off. Batteries checked and OK. Keep getting above message, alternating with " Attempting to connect to keyboard#1". Mouse OK.
What else can I do?The light shouldn't go out until it is paired. Do you have another set of batteries you can test with?
In System Preferences/Bluetooth is the keyboard showing as connected?
Apple support articles
Bluetooth FAQ
Bluetooth Quick Assist -
Can someone tell me how to log in by passing the sign in screen
Hi Sandi, seems you may need another wired Keyboard to get past this.
-
Apple bluetooth keyboard not found
MacBook Pro
Retina, 13-inch, Late 2013
Processor 2.6 GHz Intel Core i5
Software OS X 10.9.4 (13E28)
since yesterday the external bluetooth APPLE keyboard cannot be found.
I use both a Apple bluetooth mouse and an Apple bluetooth keyboard. The mouse continues to work just fine, but the keyboard just stopped working and my computer cannot find it as a bluetooth device. I didn't run any system updates at all- the bluetooth keyboard just stopped working and then I couldn't find it- I get the message "no keyboard found." And yes, the batteries are installed correctly. And yes, I have turned the keyboard on.
This is the control panel I stare at for a long time and nothing happens:
I've read all the available troubleshooting advice from Apple, which is mostly a run down of how to put batteries in the **** thing and run the Bluetooth control panel :-/
WTH?!I found a fix for this and it does work. It's so simple I have a hard time understanding why Apple doesn't promote this extremely helpful and easy solution to the bluetooth keyboard problems (I hope you have as good luck with the fix as I had.)
http://clkoerner.com/2012/06/11/how-to-pair-an-already-paired-apple-bluetooth-ke yboard/ -
Broken laptop input mouse & keyboard [xps15z] [post Syu]
Problems:
-laptop's (dell xps 15z) keyboard and mouse not working
-X broken
I am really stumped here and looking for any help / direction. I am running out of questions to ask, and would appreciate any feedback.
What I have tried:
-creating a new modprobe.conf,
-merging rc.conf.pacnew,
-downgrading to my previous udev, mkinitcpio, and module-init-tools, using the packages found in cache. remade init with
mkinitcpio -p linux
and keyboard and mouse still did not work
-merged locale.conf.pacnew
-merged pacman.conf.pacnew
-traversed almost all of the logs multiple times (have not found a silver bullet, but not positive on what Im looking for..)
Below I have included some notes, my relevant (dates) pacman.log, and what I pulled from dmesg that seemed related to me.
//notes
-usb ports work
-when i hit keys on the keyboard while at the console username prompt, nothing types, but if laptop is a dark place, the keys back-lights actually do light up...
-every other boot I get stuck on MUX error (error has been there since I installed arch, but only now does it freeze occasionally here)
[ 5.627516] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[ 5.627613] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
-the update that broke stuff I set up my pacman key config
[2012-01-20 05:14] warning: /etc/pacman.conf installed as /etc/pacman.conf.pacnew
[2012-01-20 05:14] >>> Run `pacman-key --init` to set up your pacman keyring.
[2012-01-20 05:14] upgraded pacman (3.5.4-4 -> 4.0.1-4)
-also had to force the filesystem
[2012-01-20 06:01] Running 'pacman -S --force filesystem'
[2012-01-20 06:01] upgraded filesystem (2011.10-1 -> 2011.12-2)
//dmesg findings
[ 1.034772] mousedev: PS/2 mouse device common for all mice
[ 1.045355] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 6.172182] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input8
[ 42.447721] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb2/2-1/2-1:1.0/input/input15
[ 42.447801] generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:04:00.0-1/input0
[ 42.447811] usbcore: registered new interface driver usbhid
[ 42.447812] usbhid: USB HID core driver
//pacman.log
[2012-01-20 05:13] Running 'pacman -Syu'
[2012-01-20 05:13] synchronizing package lists
[2012-01-20 05:14] upgraded linux-api-headers (3.1.4-1 -> 3.1.6-1)
[2012-01-20 05:14] warning: /etc/locale.gen installed as /etc/locale.gen.pacnew
[2012-01-20 05:14] Generating locales...
[2012-01-20 05:14] en_US.UTF-8... done
[2012-01-20 05:14] en_US.ISO-8859-1... done
[2012-01-20 05:14] Generation complete.
[2012-01-20 05:14] upgraded glibc (2.14.1-2 -> 2.15-3)
[2012-01-20 05:14] upgraded libarchive (2.8.5-2 -> 3.0.3-2)
[2012-01-20 05:14] warning: /etc/pacman.conf installed as /etc/pacman.conf.pacnew
[2012-01-20 05:14] >>> Run `pacman-key --init` to set up your pacman keyring.
[2012-01-20 05:14] upgraded pacman (3.5.4-4 -> 4.0.1-4)
[2012-01-20 05:16] Running 'pacman -Syu'
[2012-01-20 05:16] synchronizing package lists
[2012-01-20 05:16] starting full system upgrade
[2012-01-20 05:16] Running 'pacman -Syu'
[2012-01-20 05:16] synchronizing package lists
[2012-01-20 05:16] starting full system upgrade
[2012-01-20 05:22] Running 'pacman -Rdd gcc-multilib gcc-libs-multilib'
[2012-01-20 05:22] Running 'pacman -S gcc-multilib'
[2012-01-20 05:24] Running 'pacman -Syu'
[2012-01-20 05:24] synchronizing package lists
[2012-01-20 05:24] starting full system upgrade
[2012-01-20 05:25] Running 'pacman -S gcc-libs'
[2012-01-20 05:27] Running 'pacman -S gcc-objc-multilib'
[2012-01-20 05:37] Running 'pacman -Syu'
[2012-01-20 05:37] synchronizing package lists
[2012-01-20 05:37] starting full system upgrade
[2012-01-20 05:55] Running 'pacman -Syu'
[2012-01-20 05:55] synchronizing package lists
[2012-01-20 05:56] starting full system upgrade
[2012-01-20 06:01] Running 'pacman -S --force filesystem'
[2012-01-20 06:01] upgraded filesystem (2011.10-1 -> 2011.12-2)
[2012-01-20 06:01] Running 'pacman -Syu'
[2012-01-20 06:01] synchronizing package lists
[2012-01-20 06:01] starting full system upgrade
[2012-01-20 06:02] removed gcc-libs-multilib (4.6.2-3)
[2012-01-20 06:02] installed gcc-libs (4.6.2-5)
[2012-01-20 06:02] upgraded db (5.2.36-2 -> 5.3.15-1)
[2012-01-20 06:02] upgraded pam (1.1.5-1 -> 1.1.5-2)
[2012-01-20 06:02] upgraded coreutils (8.14-1 -> 8.15-1)
[2012-01-20 06:02] upgraded perl (5.14.2-4 -> 5.14.2-7)
[2012-01-20 06:02] upgraded openssl (1.0.0.e-1 -> 1.0.0.g-1)
[2012-01-20 06:02] upgraded libsasl (2.1.23-8 -> 2.1.23-9)
[2012-01-20 06:02] upgraded libldap (2.4.26-5 -> 2.4.28-2)
[2012-01-20 06:02] upgraded unixodbc (2.3.0-2 -> 2.3.1-1)
[2012-01-20 06:02] upgraded apr-util (1.3.12-3 -> 1.3.12-5)
[2012-01-20 06:02] upgraded at-spi2-core (2.2.1-1 -> 2.2.3-1)
[2012-01-20 06:02] upgraded at-spi2-atk (2.2.1-1 -> 2.2.2-1)
[2012-01-20 06:02] upgraded ca-certificates (20111025-2 -> 20111211-1)
[2012-01-20 06:02] upgraded libxi (1.4.3-1 -> 1.4.5-1)
[2012-01-20 06:02] upgraded desktop-file-utils (0.18-1 -> 0.19-1)
[2012-01-20 06:02] upgraded qt (4.7.4-3 -> 4.8.0-2)
[2012-01-20 06:02] upgraded attica (0.2.9-1 -> 0.3.0-1)
[2012-01-20 06:02] upgraded automake (1.11.1-3 -> 1.11.2-1)
[2012-01-20 06:02] upgraded binutils (2.22-2 -> 2.22-4)
[2012-01-20 06:02] upgraded bluez (4.96-1 -> 4.98-1)
[2012-01-20 06:02] upgraded cifs-utils (4.9-3 -> 5.2-1)
[2012-01-20 06:02] upgraded clutter-gst (1.4.4-1 -> 1.4.6-1)
[2012-01-20 06:02] upgraded lcms2 (2.2-1 -> 2.3-1)
[2012-01-20 06:02] upgraded colord (0.1.15-3 -> 0.1.16-1)
[2012-01-20 06:02] upgraded consolekit (0.4.5-1 -> 0.4.5-2)
[2012-01-20 06:02] upgraded cryptsetup (1.4.0-2 -> 1.4.1-1)
[2012-01-20 06:02] upgraded nss (3.12.11-3 -> 3.13.1-2)
[2012-01-20 06:02] upgraded evolution-data-server (3.2.2-1 -> 3.2.3-2)
[2012-01-20 06:03] upgraded gtk3 (3.2.2-4 -> 3.2.3-2)
[2012-01-20 06:03] upgraded gtkhtml4 (4.2.2-1 -> 4.2.3-1)
[2012-01-20 06:03] upgraded evolution (3.2.2-1 -> 3.2.3-2)
[2012-01-20 06:03] upgraded file (5.09-1 -> 5.10-1)
[2012-01-20 06:03] upgraded firefox (8.0.1-1 -> 9.0.1-1)
[2012-01-20 06:03] upgraded telepathy-glib (0.16.3-1 -> 0.16.4-1)
[2012-01-20 06:03] upgraded folks (0.6.5-1 -> 0.6.6-1)
[2012-01-20 06:03] upgraded gcc (4.6.2-3 -> 4.6.2-5)
[2012-01-20 06:03] upgraded libjpeg-turbo (1.1.1-3 -> 1.1.1-4)
[2012-01-20 06:03] upgraded gdk-pixbuf2 (2.24.0-1 -> 2.24.1-1)
[2012-01-20 06:03] upgraded gtksourceview3 (3.2.3-1 -> 3.2.3-2)
[2012-01-20 06:03] upgraded pygobject-devel (3.0.2-1 -> 3.0.3-1)
[2012-01-20 06:03] upgraded python2-gobject (3.0.2-1 -> 3.0.3-1)
[2012-01-20 06:03] upgraded gedit (3.2.5-1 -> 3.2.6-1)
[2012-01-20 06:03] upgraded git (1.7.8-1 -> 1.7.8.4-1)
[2012-01-20 06:03] upgraded gjs (1.30.0-1 -> 1.30.1-1)
[2012-01-20 06:03] upgraded gnutls (3.0.8-1 -> 3.0.11-1)
[2012-01-20 06:03] upgraded glib-networking (2.30.1-1 -> 2.30.2-1)
[2012-01-20 06:03] upgraded gpgme (1.3.1-1 -> 1.3.1-2)
[2012-01-20 06:03] upgraded gmime (2.4.28-1 -> 2.6.4-1)
[2012-01-20 06:03] upgraded gnome-color-manager (3.2.1-2 -> 3.2.2-1)
[2012-01-20 06:03] upgraded gnome-icon-theme-symbolic (3.2.1-1 -> 3.2.2-1)
[2012-01-20 06:03] upgraded gnome-keyring (3.2.2-1 -> 3.2.2-3)
[2012-01-20 06:03] upgraded whois (5.0.13-1 -> 5.0.14-1)
[2012-01-20 06:03] upgraded gnome-nettool (3.0.0-1 -> 3.0.1-1)
[2012-01-20 06:04] upgraded mutter (3.2.1-1 -> 3.2.2-1)
[2012-01-20 06:04] upgraded libpulse (1.1-1 -> 1.1-2)
[2012-01-20 06:04] upgraded gnome-shell (3.2.1-1 -> 3.2.2.1-1)
[2012-01-20 06:04] upgraded gvfs (1.10.1-1 -> 1.10.1-2)
[2012-01-20 06:04] upgraded gvfs-obexftp (1.10.1-1 -> 1.10.1-2)
[2012-01-20 06:04] upgraded vim-runtime (7.3.353-2 -> 7.3.401-1)
[2012-01-20 06:04] upgraded ruby (1.9.3_p0-2 -> 1.9.3_p0-3)
[2012-01-20 06:04] upgraded gvim (7.3.353-2 -> 7.3.401-1)
[2012-01-20 06:04] upgraded hdparm (9.37-2 -> 9.38-1)
[2012-01-20 06:04] upgraded inetutils (1.8-6 -> 1.9.1-1)
[2012-01-20 06:04] upgraded iproute2 (2.6.39-2 -> 3.2.0-1)
[2012-01-20 06:04] warning: /etc/rc.conf installed as /etc/rc.conf.pacnew
[2012-01-20 06:04] upgraded initscripts (2011.11.3-1 -> 2012.01.2-1)
[2012-01-20 06:04] upgraded jack (0.121.3-4 -> 0.121.3-5)
[2012-01-20 06:04] installed rhino (1.7R3-1)
[2012-01-20 06:04] installed jre7-openjdk-headless (7.b147_2.0-5)
[2012-01-20 06:04] upgraded jre7-openjdk (7.b147_2.0-2 -> 7.b147_2.0-5)
[2012-01-20 06:04] upgraded jdk7-openjdk (7.b147_2.0-2 -> 7.b147_2.0-5)
[2012-01-20 06:04] upgraded redland (1:1.0.15-1 -> 1:1.0.15-3)
[2012-01-20 06:04] upgraded redland-storage-virtuoso (1:1.0.15-1 -> 1:1.0.15-3)
[2012-01-20 06:04] upgraded soprano (2.7.3-1 -> 2.7.4-1)
[2012-01-20 06:04] upgraded libdbusmenu-qt (0.9.0-1 -> 0.9.0-2)
[2012-01-20 06:04] upgraded polkit-qt (0.99.0-1 -> 0.103.0-1)
[2012-01-20 06:04] upgraded phonon (1:4.5.1-2 -> 1:4.6.0-1)
[2012-01-20 06:04] installed gperf (3.0.4-4)
[2012-01-20 06:04] installed qtwebkit (2.2.1-2)
[2012-01-20 06:04] upgraded kdelibs (4.7.4-1 -> 4.7.4-5)
[2012-01-20 06:04] upgraded libassuan (2.0.2-1 -> 2.0.3-1)
[2012-01-20 06:04] upgraded libdrm (2.4.28-1 -> 2.4.30-1)
[2012-01-20 06:04] upgraded libgphoto2 (2.4.10.1-2 -> 2.4.11-1)
[2012-01-20 06:04] upgraded libgsf (1.14.21-1 -> 1.14.22-2)
[2012-01-20 06:04] upgraded libmysqlclient (5.5.19-1 -> 5.5.20-1)
[2012-01-20 06:04] upgraded liboauth (0.9.4-2 -> 0.9.6-1)
[2012-01-20 06:04] upgraded libpcap (1.1.1-4 -> 1.2.1-1)
[2012-01-20 06:04] upgraded libreoffice-en-US (3.4.4-3 -> 3.4.5-1)
[2012-01-20 06:04] upgraded libreoffice-common (3.4.4-3 -> 3.4.5-1)
[2012-01-20 06:04] upgraded libreoffice-base (3.4.4-3 -> 3.4.5-1)
[2012-01-20 06:04] upgraded libreoffice-calc (3.4.4-3 -> 3.4.5-1)
[2012-01-20 06:04] upgraded libreoffice-draw (3.4.4-3 -> 3.4.5-1)
[2012-01-20 06:04] upgraded libreoffice-gnome (3.4.4-3 -> 3.4.5-1)
[2012-01-20 06:04] upgraded libreoffice-impress (3.4.4-3 -> 3.4.5-1)
[2012-01-20 06:04] upgraded libreoffice-kde4 (3.4.4-3 -> 3.4.5-1)
[2012-01-20 06:04] upgraded libreoffice-math (3.4.4-3 -> 3.4.5-1)
[2012-01-20 06:04] upgraded libreoffice-sdk (3.4.4-3 -> 3.4.5-1)
[2012-01-20 06:04] upgraded libreoffice-sdk-doc (3.4.4-3 -> 3.4.5-1)
[2012-01-20 06:04] upgraded libreoffice-writer (3.4.4-3 -> 3.4.5-1)
[2012-01-20 06:04] upgraded util-linux (2.20.1-1 -> 2.20.1-2)
[2012-01-20 06:04] upgraded libtracker-sparql (0.12.8-1 -> 0.12.9-1)
[2012-01-20 06:04] >>> Updating module dependencies. Please wait ...
[2012-01-20 06:04] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2012-01-20 06:04] ==> Building image from preset: 'default'
[2012-01-20 06:04] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2012-01-20 06:04] ==> Starting build: 3.2.1-1-ARCH
[2012-01-20 06:04] -> Parsing hook: [base]
[2012-01-20 06:04] -> Parsing hook: [udev]
[2012-01-20 06:04] -> Parsing hook: [autodetect]
[2012-01-20 06:05] -> Parsing hook: [pata]
[2012-01-20 06:05] -> Parsing hook: [scsi]
[2012-01-20 06:05] -> Parsing hook: [sata]
[2012-01-20 06:05] -> Parsing hook: [filesystems]
[2012-01-20 06:05] -> Parsing hook: [usbinput]
[2012-01-20 06:05] ==> Generating module dependencies
[2012-01-20 06:05] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2012-01-20 06:05] ==> Image generation successful
[2012-01-20 06:05] ==> Building image from preset: 'fallback'
[2012-01-20 06:05] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2012-01-20 06:05] ==> Starting build: 3.2.1-1-ARCH
[2012-01-20 06:05] -> Parsing hook: [base]
[2012-01-20 06:05] -> Parsing hook: [udev]
[2012-01-20 06:05] -> Parsing hook: [pata]
[2012-01-20 06:05] -> Parsing hook: [scsi]
[2012-01-20 06:05] -> Parsing hook: [sata]
[2012-01-20 06:05] -> Parsing hook: [filesystems]
[2012-01-20 06:05] -> Parsing hook: [usbinput]
[2012-01-20 06:05] ==> Generating module dependencies
[2012-01-20 06:05] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2012-01-20 06:05] ==> Image generation successful
[2012-01-20 06:05] upgraded linux (3.1.5-1 -> 3.2.1-1)
[2012-01-20 06:05] upgraded linux-docs (3.1.5-1 -> 3.2.1-1)
[2012-01-20 06:05] upgraded linux-headers (3.1.5-1 -> 3.2.1-1)
[2012-01-20 06:05] upgraded mono (2.10.6-1 -> 2.10.8-1)
[2012-01-20 06:05] upgraded mysql-clients (5.5.19-1 -> 5.5.20-1)
[2012-01-20 06:05] upgraded mysql (5.5.19-1 -> 5.5.20-1)
[2012-01-20 06:05] upgraded obexd-client (0.42-1 -> 0.44-1)
[2012-01-20 06:05] upgraded php (5.3.8-5 -> 5.3.9-1)
[2012-01-20 06:05] upgraded php-apache (5.3.8-5 -> 5.3.9-1)
[2012-01-20 06:05] upgraded poppler (0.18.1-1 -> 0.18.2-1)
[2012-01-20 06:05] upgraded poppler-glib (0.18.1-1 -> 0.18.2-1)
[2012-01-20 06:05] upgraded pulseaudio (1.1-1 -> 1.1-2)
[2012-01-20 06:05] upgraded rpcbind (0.2.0-5 -> 0.2.0-6)
[2012-01-20 06:05] upgraded sdl (1.2.14-9 -> 1.2.14-10)
[2012-01-20 06:05] upgraded sdl_image (1.2.10-2 -> 1.2.11-1)
[2012-01-20 06:05] upgraded sdl_ttf (2.0.10-1 -> 2.0.11-1)
[2012-01-20 06:05] upgraded subversion (1.7.2-1 -> 1.7.2-2)
[2012-01-20 06:05] upgraded thunderbird (8.0-1 -> 9.0.1-1)
[2012-01-20 06:05] upgraded totem-plparser (2.32.6-1 -> 2.32.6-3)
[2012-01-20 06:05] upgraded tracker (0.12.8-1 -> 0.12.9-1)
[2012-01-20 06:05] upgraded wavpack (4.60.1-1 -> 4.60.1-2)
[2012-01-20 06:05] upgraded xf86-video-nouveau (0.0.16_git20110829-1 -> 0.0.16_git20120106-1)
[2012-01-20 06:05] upgraded xkeyboard-config (2.4.1-2 -> 2.4.1-3)
[2012-01-20 06:05] upgraded xorg-server-common (1.11.2-2 -> 1.11.3-1)
[2012-01-20 06:05] upgraded xorg-server (1.11.2-2 -> 1.11.3-1)
[2012-01-20 06:05] upgraded xorg-xinit (1.3.1-1 -> 1.3.1-2)
[2012-01-20 06:05] upgraded xterm (275-1 -> 276-1)
[2012-01-20 06:06] Running 'pacman -Syu'
[2012-01-20 06:06] synchronizing package lists
[2012-01-20 06:06] starting full system upgrade
[2012-01-23 04:20] Running 'pacman -Syu'
[2012-01-23 04:20] synchronizing package lists
[2012-01-23 04:20] starting full system upgrade
[2012-01-23 04:20] Running 'pacman -Syu'
[2012-01-23 04:20] synchronizing package lists
[2012-01-23 04:20] starting full system upgrade
[2012-01-23 04:21] removed module-init-tools (3.16-3)
[2012-01-23 04:21] upgraded dbus-sharp (0.7.0-3 -> 0.7.0-4)
[2012-01-23 04:21] upgraded dbus-sharp-glib (0.5.0-3 -> 0.5.0-4)
[2012-01-23 04:21] upgraded gnutls (3.0.11-1 -> 3.0.12-1)
[2012-01-23 04:21] upgraded gstreamer0.10-python (0.10.21-1 -> 0.10.22-1)
[2012-01-23 04:21] installed kmod (4-1)
[2012-01-23 04:21] upgraded udev (175-1 -> 178-1)
[2012-01-23 04:21] warning: /etc/rc.conf installed as /etc/rc.conf.pacnew
[2012-01-23 04:21] upgraded initscripts (2012.01.2-1 -> 2012.01.3-1)
[2012-01-23 04:21] upgraded libgee (0.6.3-1 -> 0.6.4-1)
[2012-01-23 04:21] upgraded mdadm (3.2.2-4 -> 3.2.3-1)
[2012-01-23 04:21] upgraded mkinitcpio (0.8.0-3 -> 0.8.2-1)
[2012-01-23 04:21] upgraded pixman (0.24.0-1 -> 0.24.2-1)
[2012-01-23 04:21] upgraded poppler (0.18.2-1 -> 0.18.3-1)
[2012-01-23 04:21] upgraded poppler-glib (0.18.2-1 -> 0.18.3-1)
[2012-01-23 04:21] upgraded sdl_image (1.2.11-1 -> 1.2.12-1)
[2012-01-23 04:21] upgraded sg3_utils (1.30-1 -> 1.33-1)
[2012-01-23 04:21] upgraded sqlite3 (3.7.9-1 -> 3.7.10-1)
[2012-01-23 04:21] upgraded xkeyboard-config (2.4.1-3 -> 2.5-1)
[2012-01-23 04:21] upgraded xterm (276-1 -> 278-1)
EDIT: SO NOW x won't even make it as far as it did before (to at least let me see the wallpaper) and eventually goes to a 'something went wrong' screen and I have to shutdown as I don't have a mouse to select Log Out.
//xorg.log
[ 31.490] (**) Option "xkb_rules" "evdev"
[ 31.490] (**) Option "xkb_model" "evdev"
[ 31.490] (**) Option "xkb_layout" "us"
[ 31.490] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 31.490] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 31.490] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 31.490] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 31.490] (**) AT Translated Set 2 keyboard: always reports core events
[ 31.490] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 31.490] (--) AT Translated Set 2 keyboard: Found keys
[ 31.490] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 31.490] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 31.490] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 31.491] (**) Option "xkb_rules" "evdev"
[ 31.491] (**) Option "xkb_model" "evdev"
[ 31.491] (**) Option "xkb_layout" "us"
[ 31.491] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event9)
[ 31.491] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 31.491] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[ 31.491] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 31.491] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 31.491] (**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event9"
[ 31.491] (--) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[ 31.491] (--) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[ 31.491] (--) ImPS/2 Generic Wheel Mouse: Found relative axes
[ 31.491] (--) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[ 31.491] (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
[ 31.491] (II) ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
[ 31.491] (**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 31.491] (**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 31.491] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 31.491] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 14)
[ 31.491] (II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[ 31.491] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[ 31.491] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[ 31.491] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 31.491] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 31.491] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0)
[ 31.491] (II) No input driver/identifier specified (ignoring)
[ 31.491] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 31.491] (II) No input driver/identifier specified (ignoring)
[ 31.492] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event8)
[ 31.492] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 31.492] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 31.492] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 31.492] (**) Dell WMI hotkeys: always reports core events
[ 31.492] (**) Dell WMI hotkeys: Device: "/dev/input/event8"
[ 31.492] (--) Dell WMI hotkeys: Found keys
[ 31.492] (II) Dell WMI hotkeys: Configuring as keyboard
[ 31.492] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event8"
[ 31.492] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 15)
[ 31.492] (**) Option "xkb_rules" "evdev"
[ 31.492] (**) Option "xkb_model" "evdev"
[ 31.492] (**) Option "xkb_layout" "us"
[ 34.195] (II) intel(0): EDID vendor "AUO", prod id 12525
[ 34.195] (II) intel(0): Printing DDC gathered Modelines:
[ 34.195] (II) intel(0): Modeline "1920x1080"x0.0 140.00 1920 1968 2068 2144 1080 1083 1084 1088 +hsync -vsync (65.3 kHz)
[ 34.195] (II) intel(0): Modeline "1920x1080"x0.0 93.33 1920 1968 2068 2144 1080 1083 1084 1088 +hsync -vsync (43.5 kHz)
[ 34.531] (II) intel(0): EDID vendor "AUO", prod id 12525
[ 34.531] (II) intel(0): Printing DDC gathered Modelines:
[ 34.531] (II) intel(0): Modeline "1920x1080"x0.0 140.00 1920 1968 2068 2144 1080 1083 1084 1088 +hsync -vsync (65.3 kHz)
[ 34.531] (II) intel(0): Modeline "1920x1080"x0.0 93.33 1920 1968 2068 2144 1080 1083 1084 1088 +hsync -vsync (43.5 kHz)
[ 66.265] (II) intel(0): EDID vendor "AUO", prod id 12525
[ 66.265] (II) intel(0): Printing DDC gathered Modelines:
[ 66.265] (II) intel(0): Modeline "1920x1080"x0.0 140.00 1920 1968 2068 2144 1080 1083 1084 1088 +hsync -vsync (65.3 kHz)
[ 66.265] (II) intel(0): Modeline "1920x1080"x0.0 93.33 1920 1968 2068 2144 1080 1083 1084 1088 +hsync -vsync (43.5 kHz)
EDIT: FOUND this bug: https://bugs.archlinux.org/task/28049 - realize I may really be fishing here..
//udev test
# line below is from dmesg
[ 1.068340] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
run_command: calling: test
adm_test: version 178
builtin_kmod_init: load module index
add_matching_files: unable to open '/run/udev/rules.d': No such file or directory
parse_file: reading '/lib/udev/rules.d/10-dm.rules' as rules file
parse_file: reading '/lib/udev/rules.d/11-dm-lvm.rules' as rules file
parse_file: reading '/lib/udev/rules.d/13-dm-disk.rules' as rules file
parse_file: reading '/lib/udev/rules.d/40-gphoto.rules' as rules file
add_rule: IMPORT found builtin 'usb_id --export %p', replacing /lib/udev/rules.d/40-gphoto.rules:11
parse_file: reading '/lib/udev/rules.d/40-hpet-permissions.rules' as rules file
parse_file: reading '/lib/udev/rules.d/42-qemu-usb.rules' as rules file
parse_file: reading '/lib/udev/rules.d/50-udev-default.rules' as rules file
parse_file: reading '/lib/udev/rules.d/53-sane.rules' as rules file
parse_file: reading '/lib/udev/rules.d/60-cdrom_id.rules' as rules file
parse_file: reading '/lib/udev/rules.d/60-pcmcia.rules' as rules file
parse_file: reading '/lib/udev/rules.d/60-persistent-alsa.rules' as rules file
parse_file: reading '/lib/udev/rules.d/60-persistent-input.rules' as rules file
parse_file: reading '/lib/udev/rules.d/60-persistent-serial.rules' as rules file
parse_file: reading '/lib/udev/rules.d/60-persistent-storage-tape.rules' as rules file
parse_file: reading '/lib/udev/rules.d/60-persistent-storage.rules' as rules file
parse_file: reading '/lib/udev/rules.d/60-persistent-v4l.rules' as rules file
parse_file: reading '/lib/udev/rules.d/61-accelerometer.rules' as rules file
parse_file: reading '/lib/udev/rules.d/61-gnome-bluetooth-rfkill.rules' as rules file
parse_file: reading '/lib/udev/rules.d/64-md-raid.rules' as rules file
parse_file: reading '/lib/udev/rules.d/69-cd-sensors.rules' as rules file
add_rule: IMPORT found builtin 'usb_id --export %p', replacing /lib/udev/rules.d/69-cd-sensors.rules:76
add_rule: IMPORT found builtin 'usb-db %p', replacing /lib/udev/rules.d/69-cd-sensors.rules:77
parse_file: reading '/lib/udev/rules.d/70-infrared.rules' as rules file
parse_file: reading '/lib/udev/rules.d/70-udev-acl.rules' as rules file
parse_file: reading '/lib/udev/rules.d/75-net-description.rules' as rules file
parse_file: reading '/lib/udev/rules.d/75-probe_mtd.rules' as rules file
parse_file: reading '/lib/udev/rules.d/75-tty-description.rules' as rules file
parse_file: reading '/lib/udev/rules.d/77-nm-olpc-mesh.rules' as rules file
parse_file: reading '/lib/udev/rules.d/78-sound-card.rules' as rules file
parse_file: reading '/lib/udev/rules.d/80-drivers.rules' as rules file
parse_file: reading '/lib/udev/rules.d/80-udisks.rules' as rules file
add_rule: IMPORT found builtin 'pci-db %p', replacing /lib/udev/rules.d/80-udisks.rules:6
parse_file: reading '/lib/udev/rules.d/85-usbmuxd.rules' as rules file
parse_file: reading '/lib/udev/rules.d/90-pulseaudio.rules' as rules file
parse_file: reading '/lib/udev/rules.d/95-cd-devices.rules' as rules file
parse_file: reading '/lib/udev/rules.d/95-dm-notify.rules' as rules file
parse_file: reading '/lib/udev/rules.d/95-keyboard-force-release.rules' as rules file
parse_file: reading '/lib/udev/rules.d/95-keymap.rules' as rules file
parse_file: reading '/lib/udev/rules.d/95-udev-late.rules' as rules file
parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-dell.rules' as rules file
parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-fujitsu.rules' as rules file
parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-gateway.rules' as rules file
parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-ibm.rules' as rules file
parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-lenovo.rules' as rules file
parse_file: reading '/lib/udev/rules.d/95-upower-battery-recall-toshiba.rules' as rules file
parse_file: reading '/lib/udev/rules.d/95-upower-csr.rules' as rules file
parse_file: reading '/lib/udev/rules.d/95-upower-hid.rules' as rules file
parse_file: reading '/lib/udev/rules.d/95-upower-wup.rules' as rules file
parse_file: reading '/lib/udev/rules.d/97-bluetooth-hid2hci.rules' as rules file
udev_rules_new: rules use 188232 bytes tokens (15686 * 12 bytes), 27728 bytes buffer
udev_rules_new: temporary index used 50920 bytes (2546 * 20 bytes)
udev_device_new_from_syspath: device 0x1a25700 has devpath '/devices/platform/i8042/serio0/input/input0'
udev_device_new_from_syspath: device 0x1a34d60 has devpath '/devices/platform/i8042/serio0/input/input0'
udev_device_read_db: device 0x1a34d60 filled with db file data
udev_rules_apply_to_event: IMPORT builtin 'input_id' /lib/udev/rules.d/50-udev-default.rules:23
udev_builtin_add_property: ID_INPUT=1
get_cap_mask: capabilities/ev raw kernel attribute: 120013
get_cap_mask: capabilities/abs raw kernel attribute: 0
get_cap_mask: capabilities/rel raw kernel attribute: 0
get_cap_mask: capabilities/key raw kernel attribute: 402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
test_key: test_key: checking bit block 0 for any keys; found=1
test_key: test_key: checking bit block 64 for any keys; found=1
test_key: test_key: checking bit block 128 for any keys; found=1
test_key: test_key: checking bit block 192 for any keys; found=1
udev_builtin_add_property: ID_INPUT_KEY=1
udev_builtin_add_property: ID_INPUT_KEYBOARD=1
udev_device_new_from_syspath: device 0x1a361d0 has devpath '/devices/platform/i8042/serio0'
udev_device_new_from_syspath: device 0x1a36740 has devpath '/devices/platform/i8042'
udev_device_new_from_syspath: device 0x1a36d00 has devpath '/devices/platform'
udev_rules_apply_to_event: IMPORT builtin 'path_id' /lib/udev/rules.d/60-persistent-input.rules:31
udev_builtin_add_property: ID_PATH=platform-i8042-serio-0
udev_builtin_add_property: ID_PATH_TAG=platform-i8042-serio-0
udev_rules_apply_to_event: IMPORT builtin 'kmod' /lib/udev/rules.d/80-drivers.rules:5
builtin_kmod: execute 'load' 'input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw'
load_module: inserted 'evdev'
udev_device_update_db: created db file '/run/udev/data/+input:input0' for '/devices/platform/i8042/serio0/input/input0'
builtin_kmod_exit: unload module index
This program is for debugging only, it does not run any program,
specified by a RUN key. It may show incorrect results, because
some values may be different, or not available at a simulation run.
.INPUT_CLASS=kbd
ACTION=add
DEVPATH=/devices/platform/i8042/serio0/input/input0
EV=120013
ID_INPUT=1
ID_INPUT_KEY=1
ID_INPUT_KEYBOARD=1
ID_PATH=platform-i8042-serio-0
ID_PATH_TAG=platform-i8042-serio-0
ID_SERIAL=noserial
KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
LED=7
MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw
MSC=10
NAME="AT Translated Set 2 keyboard"
PHYS="isa0060/serio0/input0"
PRODUCT=11/1/1/ab41
PROP=0
SUBSYSTEM=input
UDEV_LOG=6
USEC_INITIALIZED=5011892
Last edited by killnine (2012-01-25 14:39:33)I'm glad that fixed your keyboard.
Good idea about the wiki page. If/when I have time I will add something. Feel free to do so if you have some.
I've not had the computer for long, however the core install boots and works fine, but after updating the keyboard and mouse become unresponsive, so unfortunately from my perspective, one of the updates in the past 4 or 5 months broke it! However, though I've not tried any combinations of boot parameters, the vast majority of live CDs won't even boot without acpi=off (or presumably, only acpi=noirq is actually needed, looking at your tests) so it doesn't look to be Arch specific.
For your X problems, are you using a DE or WM, and how are you logging in? If you can disable the login manager (if present) and start an X session with startx, with say only exec xterm in your ~/.xinitrc that might help pinpoint the issue. If that works, it will unlikely be an X issue, more one of your DE/WM. -
XORG: Keyboard don't work right
Hi,
after the last System update my keyboard (under xorg) is totally messed up! The arrow keys,the del key the Pos1 key, the End key..... all don't work. All characters numbers and special characters like(!"§$%&/....) work though. Even the German "Umlauts" are working!
Here my xorg.conf:
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
Load "freetype"
# Load "xtt"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 64.3
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-100
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "** ATI Radeon (generic) [radeon]"
Driver "radeon"
#VideoRam 262144
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "** ATI Radeon (generic) [radeon]"
Monitor "My Monitor"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1400x1050" "1280x1024" "1024x768"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
and the corresponding log:
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux stella 2.6.27-ARCH #1 SMP PREEMPT Fri Nov 28 10:56:24 UTC 2008 i686
Build Date: 05 December 2008 09:10:55PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 9 17:03:13 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "** ATI Radeon (generic) [radeon]"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Mouse1
(WW) Disabling Keyboard1
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d5900
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:0:0) ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] rev 0, Mem @ 0xa8000000/0, 0xe0010000/0, I/O @ 0x0000c100/0, BIOS @ 0x????????/131072
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded by default.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 6.9.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610, ATI RV670,
ATI Radeon HD3870, ATI Radeon HD3850, ATI RV670,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE, ATI Radeon HD 3470,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI FireMV 2450, ATI FireMV 2260,
ATI FireMV 2260, ATI ATI Radeon HD 3600 Series,
ATI ATI Radeon HD 3650 AGP, ATI ATI Radeon HD 3600 PRO,
ATI ATI Radeon HD 3600 XT, ATI ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0x00000000e0010000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP)" (ChipID = 0x4e50)
(--) RADEON(0): Linear framebuffer at 0x00000000a8000000
(II) RADEON(0): AGP card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=65536K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 65536 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2560x1200
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 20000, max_out_pll: 35000, min_in_pll: 40, max_in_pll: 3000, xclk: 20000, sclk: 200.000000, mclk: 390.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=6 min=20000 max=35000; xclk=20000
(II) RADEON(0): Bios Connector table:
(II) RADEON(0): Port0: DDCType-0x60, DACType-1, TMDSType-1, ConnectorType-1
(II) RADEON(0): Port4: DDCType-0x0, DACType-0, TMDSType-0, ConnectorType-7
(II) RADEON(0): Port5: DDCType-0x0, DACType-2, TMDSType-0, ConnectorType-5
(II) RADEON(0): Output VGA-0 using monitor section My Monitor
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): Panel ID string: AUO
(II) RADEON(0): Panel Size from BIOS: 1400x1050
(II) RADEON(0): BIOS provided dividers will be used.
(WW) RADEON(0): LVDS Info:
XRes: 1400, YRes: 1050, DotClock: 108000
HBlank: 240, HOverPlus: 48, HSyncWidth: 112
VBlank: 15, VOverPlus: 1, VSyncWidth: 3
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: NTSC
(II) RADEON(0): TV standards supported by chip: NTSC PAL
(II) RADEON(0): Port0:
Monitor -- AUTO
Connector -- VGA
DAC Type -- Primary
TMDS Type -- None
DDC Type -- 0x60
(II) RADEON(0): Port1:
Monitor -- AUTO
Connector -- LVDS
DAC Type -- None
TMDS Type -- None
DDC Type -- 0x0
(II) RADEON(0): Port2:
Monitor -- AUTO
Connector -- STV
DAC Type -- TVDAC/ExtDAC
TMDS Type -- None
DDC Type -- 0x0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
finished output detect: 1
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
finished output detect: 2
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1400x1050
(II) RADEON(0): Adding Screen mode: 1280x1024
(II) RADEON(0): Adding Screen mode: 1024x768
(II) RADEON(0): Total number of valid Screen mode(s) added: 2
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Using user preference for initial modes
(II) RADEON(0): Output LVDS using initial mode 1400x1050
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.2.0
ABI class: X.Org Video Driver, version 4.1
(==) RADEON(0): Assuming overlay scaler buffer width is 1920
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) RADEON(0): RADEONScreenInit a8000000 0 0
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
(II) RADEON(0): Dynamic Clock Scaling Disabled
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x04000000
(II) RADEON(0): MC_FB_LOCATION : 0xabffa800
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Using 32 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 29 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1408,8191)
(II) RADEON(0): Reserved area from (0,1200) to (1408,1202)
(II) RADEON(0): Largest offscreen area available: 1408 x 6989
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0xd10000
(II) RADEON(0): Will use depth buffer at offset 0x1382000
(II) RADEON(0): Will use 38912 kb for textures at offset 0x19f4000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xa8000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(==) RADEON(0): Using AGP 4x
(II) RADEON(0): [agp] Mode 0x1f000207 [AGP 0x8086/0x3340; Card 0x1002/0x4e50]
(II) RADEON(0): [agp] 32768 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xb0000000
(II) RADEON(0): [agp] Ring mapped at 0xb37a2000
(II) RADEON(0): [agp] ring read ptr handle = 0xb0101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xb7f7a000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xb0102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xb35a2000
(II) RADEON(0): [agp] GART texture map handle = 0xb0302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xb1922000
(II) RADEON(0): [drm] register handle = 0xe0010000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xabffa800 0x1fff0000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 10
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xabffa800 is: 0xabffa800
(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xb1ffb000
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xabffa800 0xabffa800
(II) RADEON(0): MC_AGP_LOCATION : 0xb1ffb000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): num quad-pipes is 1
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00674c00
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00678e00
(II) RADEON(0): Largest offscreen area available: 1408 x 6983
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): Set up overlay video
(II) RADEON(0): Set up textured video
init memmap
init common
init crtc1
init pll1
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xabffa800 0xabffa800
(II) RADEON(0): MC_AGP_LOCATION : 0xb1ffb000
restore common
restore crtc1
restore pll1
finished PLL1
restore LVDS
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 370 x 277
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.99.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) Synaptics touchpad driver version 0.99.1
(**) Option "Device" "/dev/input/event8"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(--) SynPS/2 Synaptics TouchPad touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) config/hal: Adding input device Logitech USB Receiver
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 2.0.7
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event4"
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) Logitech USB Receiver: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) Logitech USB Receiver: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Logitech USB Receiver: xkb_layout: "us"
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event3"
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Found mouse buttons
(II) Logitech USB Receiver: Configuring as mouse
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
(II) config/hal: Adding input device C-Media USB Headphone Set
(**) C-Media USB Headphone Set: always reports core events
(**) C-Media USB Headphone Set: Device: "/dev/input/event2"
(II) C-Media USB Headphone Set: Found keys
(II) C-Media USB Headphone Set: Configuring as keyboard
(II) XINPUT: Adding extended input device "C-Media USB Headphone Set" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) C-Media USB Headphone Set: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) C-Media USB Headphone Set: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) C-Media USB Headphone Set: xkb_layout: "us"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) AT Translated Set 2 keyboard: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) AT Translated Set 2 keyboard: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) AT Translated Set 2 keyboard: xkb_layout: "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Found mouse buttons
(II) Macintosh mouse button emulation: Configuring as mouse
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1400x1050
(II) RADEON(0): Adding Screen mode: 1280x1024
(II) RADEON(0): Adding Screen mode: 1024x768
(II) RADEON(0): Total number of valid Screen mode(s) added: 2
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
sorry for this huge post - but i think that's all needed.... so does anybody have a clue?
thanks and bye
smaxThanks Bob for that very fast reply!
But neither "Modifying hal configuration" nor "Using the Desktop Environment settings" (xfce) worked. So I tried the "I don't want this crap, how do I turn it off?" solution and well it works
Maybe I turn it back on in a month or so.. but for now i'm fine with no hot plugging but a working keyboard...
Thanks and Bye!
smax
Last edited by smaxer (2008-12-09 17:42:43) -
Xorg/Intel, issues. "Fatal Error: No Screens Found" [SOLVED]
I'm using an intel chipset with integrated graphics on an older computer, (old enough that I have to use kms) which worked previously, but didn't after the update. I've already enabled kms, so I ruled that out, if any of you can help, here are my logs:
Results of $- Xinit
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.1.901 (1.7.2 RC 1)
Release Date: 2009-11-6
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-ARCH i686
Current Operating System: Linux Sek-Gamma 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
Kernel command line: root=/dev/disk/by-uuid/82572740-394d-448c-8da4-b6d4ed904793 ro acpi=off
Build Date: 08 November 2009 04:12:47PM
Current version of pixman: 0.16.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 16 02:09:03 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81e5d40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 3
(--) PCI:*(0:0:2:0) 8086:2562:109f:3189 Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device rev 3, Mem @ 0xf0000000/134217728, 0xe8000000/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) Open APM successful
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.4.901, module version = 2.10.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 00@00:02:0
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(EE) intel(0): No kernel modesetting driver detected.
(II) UnloadModule: "intel"
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
With the vesa driver specified, it still gives me an error based on the extension "Record" in xorg.
Last edited by silversnakeeyes (2010-08-25 13:58:14)Crap, it didn't work. I tried with the i915 thing on through grub, and is still failed.
The bug in xorg also said that there was a bug with the module 'record' so I removed it completely and tried again, for some reason it still didn't work. With vesa as the driver, I get a black screen, which is the closest to a GUI I've seen in weeks.
Error log - Vesa with 'Record' removed:
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.1.901 (1.7.2 RC 1)
Release Date: 2009-11-6
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-ARCH i686
Current Operating System: Linux Sek-Gamma 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
Kernel command line: root=/dev/disk/by-uuid/82572740-394d-448c-8da4-b6d4ed904793 ro acpi=off i915.modeset=1
Build Date: 08 November 2009 04:12:47PM
Current version of pixman: 0.16.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 16 23:20:03 2010
(++) Using config file: "/home/ssen/xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81e5d40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 2
(--) PCI:*(0:0:2:0) 8086:2562:109f:3189 Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device rev 3, Mem @ 0xf0000000/134217728, 0xe8000000/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) Open APM successful
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.0.901, module version = 2.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00@00:02:0
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.1.0
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 8000 kB
(II) VESA(0): VESA VBE OEM: Intel(r)845G/845GL/845GE/845GV Graphics Chip Accelerated VGA BIOS
(II) VESA(0): VESA VBE OEM Software Rev: 1.0
(II) VESA(0): VESA VBE OEM Vendor: Intel Corporation
(II) VESA(0): VESA VBE OEM Product: Intel(r)845G/845GL/845GE/845GV Graphics Controller
(II) VESA(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(==) VESA(0): Depth 24, (--) framebuffer bpp 32
(==) VESA(0): RGB weight 888
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) VESA(0): VESA VBE DDC supported
(II) VESA(0): VESA VBE DDC Level none
(II) VESA(0): VESA VBE DDC transfer in appr. 0 sec.
(II) VESA(0): VESA VBE DDC read failed
(II) VESA(0): VESA VBE PanelID invalid
(II) VESA(0): Searching for matching VESA mode(s):
Mode: 13c (1920x1440)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 1920
XResolution: 1920
YResolution: 1440
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 1
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1920
BnkNumberOfImagePages: 1
LinNumberOfImagePages: 1
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
Mode: 14d (1920x1440)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 3840
XResolution: 1920
YResolution: 1440
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 0
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 3840
BnkNumberOfImagePages: 0
LinNumberOfImagePages: 0
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
Mode: 15c (1920x1440)
ModeAttributes: 0x9a
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 7680
XResolution: 1920
YResolution: 1440
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 0
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 8
RsvdFieldPosition: 24
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 7680
BnkNumberOfImagePages: 0
LinNumberOfImagePages: 0
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 8
LinRsvdFieldPosition: 24
MaxPixelClock: 230000000
Mode: 13a (1600x1200)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 1600
XResolution: 1600
YResolution: 1200
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 3
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1600
BnkNumberOfImagePages: 3
LinNumberOfImagePages: 3
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
Mode: 14b (1600x1200)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 3200
XResolution: 1600
YResolution: 1200
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 1
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 3200
BnkNumberOfImagePages: 1
LinNumberOfImagePages: 1
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
*Mode: 15a (1600x1200)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 6400
XResolution: 1600
YResolution: 1200
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 0
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 8
RsvdFieldPosition: 24
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 6400
BnkNumberOfImagePages: 0
LinNumberOfImagePages: 0
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 8
LinRsvdFieldPosition: 24
MaxPixelClock: 230000000
Mode: 107 (1280x1024)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 1280
XResolution: 1280
YResolution: 1024
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 5
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1280
BnkNumberOfImagePages: 5
LinNumberOfImagePages: 5
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
Mode: 11a (1280x1024)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 2560
XResolution: 1280
YResolution: 1024
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 2
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 2560
BnkNumberOfImagePages: 2
LinNumberOfImagePages: 2
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
*Mode: 11b (1280x1024)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 5120
XResolution: 1280
YResolution: 1024
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 0
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 8
RsvdFieldPosition: 24
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 5120
BnkNumberOfImagePages: 0
LinNumberOfImagePages: 0
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 8
LinRsvdFieldPosition: 24
MaxPixelClock: 230000000
Mode: 105 (1024x768)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 1024
XResolution: 1024
YResolution: 768
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 9
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1024
BnkNumberOfImagePages: 9
LinNumberOfImagePages: 9
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
Mode: 117 (1024x768)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 2048
XResolution: 1024
YResolution: 768
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 4
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 2048
BnkNumberOfImagePages: 4
LinNumberOfImagePages: 4
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
*Mode: 118 (1024x768)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 4096
XResolution: 1024
YResolution: 768
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 1
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 8
RsvdFieldPosition: 24
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 4096
BnkNumberOfImagePages: 1
LinNumberOfImagePages: 1
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 8
LinRsvdFieldPosition: 24
MaxPixelClock: 230000000
*Mode: 112 (640x480)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 2560
XResolution: 640
YResolution: 480
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 5
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 8
RsvdFieldPosition: 24
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 2560
BnkNumberOfImagePages: 5
LinNumberOfImagePages: 5
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 8
LinRsvdFieldPosition: 24
MaxPixelClock: 230000000
Mode: 114 (800x600)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 1600
XResolution: 800
YResolution: 600
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 7
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1600
BnkNumberOfImagePages: 7
LinNumberOfImagePages: 7
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
*Mode: 115 (800x600)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 3200
XResolution: 800
YResolution: 600
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 3
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 8
RsvdFieldPosition: 24
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 3200
BnkNumberOfImagePages: 3
LinNumberOfImagePages: 3
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 8
LinRsvdFieldPosition: 24
MaxPixelClock: 230000000
Mode: 109 (132x25)
ModeAttributes: 0xf
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 594
XResolution: 132
YResolution: 25
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 4
NumberOfBanks: 1
MemoryModel: 0
BankSize: 0
NumberOfImages: 0
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0x0
LinBytesPerScanLine: 0
BnkNumberOfImagePages: 0
LinNumberOfImagePages: 0
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 0
Mode: 10a (132x43)
ModeAttributes: 0xf
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 594
XResolution: 132
YResolution: 43
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 4
NumberOfBanks: 1
MemoryModel: 0
BankSize: 0
NumberOfImages: 0
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0x0
LinBytesPerScanLine: 0
BnkNumberOfImagePages: 0
LinNumberOfImagePages: 0
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 0
Mode: 10b (132x50)
ModeAttributes: 0xf
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 594
XResolution: 132
YResolution: 50
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 4
NumberOfBanks: 1
MemoryModel: 0
BankSize: 0
NumberOfImages: 0
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0x0
LinBytesPerScanLine: 0
BnkNumberOfImagePages: 0
LinNumberOfImagePages: 0
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 0
Mode: 10c (132x60)
ModeAttributes: 0xf
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 594
XResolution: 132
YResolution: 60
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 4
NumberOfBanks: 1
MemoryModel: 0
BankSize: 0
NumberOfImages: 0
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0x0
LinBytesPerScanLine: 0
BnkNumberOfImagePages: 0
LinNumberOfImagePages: 0
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 0
Mode: 101 (640x480)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 640
XResolution: 640
YResolution: 480
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 24
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 640
BnkNumberOfImagePages: 24
LinNumberOfImagePages: 24
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
Mode: 103 (800x600)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 800
XResolution: 800
YResolution: 600
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 16
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 800
BnkNumberOfImagePages: 16
LinNumberOfImagePages: 16
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
Mode: 111 (640x480)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 1280
XResolution: 640
YResolution: 480
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 12
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1280
BnkNumberOfImagePages: 12
LinNumberOfImagePages: 12
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
(II) VESA(0): Total Memory: 125 64KB banks (8000kB)
(II) VESA(0): Monitor0: Using default hsync range of 31.50-37.90 kHz
(II) VESA(0): Monitor0: Using default vrefresh range of 50.00-70.00 Hz
(WW) VESA(0): Unable to estimate virtual size
(II) VESA(0): Not using built-in mode "1600x1200" (no mode of this name)
(II) VESA(0): Not using built-in mode "1280x1024" (no mode of this name)
(II) VESA(0): Not using built-in mode "1024x768" (no mode of this name)
(II) VESA(0): Not using built-in mode "800x600" (no mode of this name)
(II) VESA(0): Not using built-in mode "640x480" (no mode of this name)
(WW) VESA(0): No valid modes left. Trying less strict filter...
(II) VESA(0): Monitor0: Using hsync range of 31.50-37.90 kHz
(II) VESA(0): Monitor0: Using vrefresh range of 50.00-70.00 Hz
(WW) VESA(0): Unable to estimate virtual size
(II) VESA(0): Not using built-in mode "1600x1200" (hsync out of range)
(II) VESA(0): Not using built-in mode "1280x1024" (hsync out of range)
(II) VESA(0): Not using built-in mode "1024x768" (hsync out of range)
(--) VESA(0): Virtual size is 800x600 (pitch 800)
(**) VESA(0): *Built-in mode "800x600"
(**) VESA(0): *Built-in mode "640x480"
(==) VESA(0): DPI set to (96, 96)
(II) VESA(0): Attempting to use 60Hz refresh for mode "800x600" (115)
(II) VESA(0): Attempting to use 60Hz refresh for mode "640x480" (112)
(**) VESA(0): Using "Shadow Framebuffer"
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules/libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 8000 kB
(II) VESA(0): VESA VBE OEM: Intel(r)845G/845GL/845GE/845GV Graphics Chip Accelerated VGA BIOS
(II) VESA(0): VESA VBE OEM Software Rev: 1.0
(II) VESA(0): VESA VBE OEM Vendor: Intel Corporation
(II) VESA(0): VESA VBE OEM Product: Intel(r)845G/845GL/845GE/845GV Graphics Controller
(II) VESA(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) VESA(0): virtual address = 0xb6883000,
physical address = 0xf0000000, size = 8192000
(II) VESA(0): Setting up VESA Mode 0x115 (800x600)
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Backing store disabled
(==) VESA(0): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.0.901, module version = 2.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Logitech USB Gaming Mouse
(**) Logitech USB Gaming Mouse: always reports core events
(**) Logitech USB Gaming Mouse: Device: "/dev/input/event3"
(II) Logitech USB Gaming Mouse: Found 20 mouse buttons
(II) Logitech USB Gaming Mouse: Found scroll wheel(s)
(II) Logitech USB Gaming Mouse: Found relative axes
(II) Logitech USB Gaming Mouse: Found x and y relative axes
(II) Logitech USB Gaming Mouse: Configuring as mouse
(**) Logitech USB Gaming Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB Gaming Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Gaming Mouse" (type: MOUSE)
(**) Logitech USB Gaming Mouse: (accel) keeping acceleration scheme 1
(**) Logitech USB Gaming Mouse: (accel) acceleration profile 0
(II) Logitech USB Gaming Mouse: initialized for relative axes.
(II) Logitech USB Gaming Mouse: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev" -
Keyboard not working with xorg-server 1.6.1-1 or xkeyboard 1.5-1
Hello!
I have a problem with a no working keyboard. It seems like this is a problem related to some of the latest xkeyboard-config or xorg-server versions. This have been a problem some time, but it have been solved by downgrading xkeyboard-config to v1.5-1 and xorg-server to v1.6.1-1.
I'm booting into runlevel 3. Keyboard is working in the terminal, but when I run startx, the keyboard stops working. The mouse works fine.
Have tested with an empty xorg.conf file. Then I get a 'no screen found' error. And I have tryed to enable the keyboard entry in xorg.conf. X starts, but no keyboard. Hal is running.
Any ideas?
The xorg.conf and rc.conf
# Copyright 2004 The X.Org Foundation
Section "ServerLayout"
Identifier "Laptop"
Screen 0 "Default" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
# InputDevice "EvdevMouse" "CorePointer"
# Inputdevice "Trackpoint" "SendCoreEvents"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "True"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
EndSection
Section "Monitor"
Identifier "LCD"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "radeon_hd"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Default"
Device "radeon_hd"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1440x900" "1024x768"
Virtual 2720 1024
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
# /etc/rc.conf - Main Configuration for Arch Linux
LOCALE="en_US.utf8"
HARDWARECLOCK="UTC"
USEDIRECTISA="no"
TIMEZONE="Europe/Oslo"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
MOD_AUTOLOAD="yes"
MODULES=(fglrx vboxdrv vboxnetadp acpi_cpufreq cpufreq_ondemand !pcspkr)
USELVM="no"
HOSTNAME="ArchT400"
eth0="dhcp"
INTERFACES=(!eth0)
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
DAEMONS=(syslog-ng network netfs hal laptop-mode cpufreq crond oss @autowifi @cups @openntpd @hddtemp)
Last edited by orjanp (2009-08-11 13:07:41)Her er Xorg.0.log
X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux ArchT400 2.6.30-ARCH #1 SMP PREEMPT Fri Jul 31 07:30:28 CEST 2009 x86_64
Build Date: 03 August 2009 08:17:16PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug 12 10:39:18 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Laptop"
(**) |-->Screen "Default" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "radeon_hd"
(==) No monitor specified for screen "Default".
Using a default monitor configuration.
(**) Option "AutoAddDevices" "True"
(**) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x7540
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0:1:0:0) 1002:95c4:17aa:210e ATI Technologies Inc Mobility Radeon HD 3400 Series rev 0, Mem @ 0xd0000000/268435456, 0xcfff0000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.4.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.4.0, module version = 1.0.0
(II) Loading extension XFree86-DRI
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.63.2
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.63.2
Module class: X.Org Video Driver
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) ATI Proprietary Linux Driver Version Identifier:8.63.2
(II) ATI Proprietary Linux Driver Release Identifier: 8.632
(II) ATI Proprietary Linux Driver Build Date: Jul 2 2009 12:25:51
(II) Loading PCS database from /etc/ati/amdpcsdb
(WW) This ATI Proprietary Linux Driver does not guarantee support of video driver ABI higher than 2.0
(WW) Video driver ABI version of the X server is 5.0
(--) Assigning device section with no busID to primary device
(--) Chipset Supported AMD Graphics Processor (0x95C4) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) fglrx(0): pEnt->device->identifier=0x154b6d0
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(II) fglrx(0): 10BitPixelFormat disabled by default
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(--) fglrx(0): Chipset: "ATI Mobility Radeon HD 3400 Series" (Chipset = 0x95c4)
(--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x210e)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xcfff0000
(--) fglrx(0): I/O port at 0x00002000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): Battery is used
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 10.88
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: M82
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 262144 kByte, Type: DDR3
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Using adapter: 1:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
(II) fglrx(0): [pcie] 1986048 kB allocated
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(II) fglrx(0): Interrupt handler installed at IRQ 32.
(II) fglrx(0): IRQ 32 Enabled.
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(==) fglrx(0): Center Mode is disabled
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000002, disabled=0x00000000
(II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: LEN Model: 4036 Serial#: 0
(II) fglrx(0): Year: 2008 Week: 0
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 30 vert.: 19
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.571 redY: 0.340 greenX: 0.338 greenY: 0.542
(II) fglrx(0): blueX: 0.158 blueY: 0.125 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 101.6 MHz Image Size: 304 x 190 mm
(II) fglrx(0): h_active: 1440 h_sync: 1488 h_sync_end 1520 h_blank_end 1824 h_border: 0
(II) fglrx(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 926 v_border: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 85.6 MHz Image Size: 304 x 190 mm
(II) fglrx(0): h_active: 1440 h_sync: 1488 h_sync_end 1520 h_blank_end 1848 h_border: 0
(II) fglrx(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 926 v_border: 0
(WW) fglrx(0): Unknown vendor-specific block f
(II) fglrx(0): LP141WP2-TLB1
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff0030ae364000000000
(II) fglrx(0): 00120103801e1378ea4b859257568a28
(II) fglrx(0): 20505400000001010101010101010101
(II) fglrx(0): 010101010101b027a08051841a303020
(II) fglrx(0): 360030be100000197021a09851841a30
(II) fglrx(0): 3020360030be100000190000000f0095
(II) fglrx(0): 0a32950a28191900320c3c01000000fe
(II) fglrx(0): 004c503134315750322d544c4231001f
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Output LCD using monitor section LCD
(II) fglrx(0): Output DFP1 has no monitor section
(II) fglrx(0): Output CRT1 has no monitor section
(II) fglrx(0): EDID vendor "LEN", prod id 16438
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 -hsync -vsync (55.7 kHz)
(II) fglrx(0): Modeline "1440x900"x0.0 85.60 1440 1488 1520 1848 900 903 909 926 -hsync -vsync (46.3 kHz)
(II) fglrx(0): Output LCD connected
(II) fglrx(0): Output DFP1 disconnected
(II) fglrx(0): Output CRT1 disconnected
(II) fglrx(0): Using user preference for initial modes
(II) fglrx(0): Output LCD using initial mode 1440x900
(++) fglrx(0): DPI set to (96, 96)
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): QBS disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(II) fglrx(0): Finished Initialize PPLIB!
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906
(WW) fglrx(0): could not detect X server version (query_status=-1)
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
(II) fglrx(0): DRIScreenInit for fglrx driver
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xcd000
(II) fglrx(0): [drm] mapped SAREA 0xcd000 to 0x7f3e01f4b000
(II) fglrx(0): [drm] framebuffer handle = 0xce000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.63.2
(II) fglrx(0): Date: Jul 2 2009
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.30-ARCH
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: yes
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0x000cf000
(II) fglrx(0): Display width adjusted to to 2816 due to alignment constraints
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x0106a000
(II) fglrx(0): FBMM initialized for area (0,0)-(2816,1528)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(2816,1024) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 2816 x 504
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(II) fglrx(0): DPMS enabled
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 1.0.0
(II) Loading extension GLESX
(II) fglrx(0): GLESX enableFlags = 94
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Driver provided ScreenToScreenBitBlt replacement
Driver provided FillSolidRects replacement
(II) fglrx(0): GLESX is enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules//amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 1.0.0
(II) Loading extension AMDXVOPL
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): Enable composite support successfully
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(==) fglrx(0): Using software cursor
(II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(WW) AIGLX: 3D driver claims to not support visual 0x33
(WW) AIGLX: 3D driver claims to not support visual 0x34
(WW) AIGLX: 3D driver claims to not support visual 0x35
(WW) AIGLX: 3D driver claims to not support visual 0x36
(WW) AIGLX: 3D driver claims to not support visual 0x37
(WW) AIGLX: 3D driver claims to not support visual 0x38
(WW) AIGLX: 3D driver claims to not support visual 0x39
(WW) AIGLX: 3D driver claims to not support visual 0x3a
(WW) AIGLX: 3D driver claims to not support visual 0x3b
(WW) AIGLX: 3D driver claims to not support visual 0x3c
(WW) AIGLX: 3D driver claims to not support visual 0x3d
(WW) AIGLX: 3D driver claims to not support visual 0x3e
(WW) AIGLX: 3D driver claims to not support visual 0x3f
(WW) AIGLX: 3D driver claims to not support visual 0x40
(WW) AIGLX: 3D driver claims to not support visual 0x41
(WW) AIGLX: 3D driver claims to not support visual 0x42
(WW) AIGLX: 3D driver claims to not support visual 0x43
(WW) AIGLX: 3D driver claims to not support visual 0x44
(WW) AIGLX: 3D driver claims to not support visual 0x45
(WW) AIGLX: 3D driver claims to not support visual 0x46
(WW) AIGLX: 3D driver claims to not support visual 0x47
(WW) AIGLX: 3D driver claims to not support visual 0x48
(WW) AIGLX: 3D driver claims to not support visual 0x49
(WW) AIGLX: 3D driver claims to not support visual 0x4a
(WW) AIGLX: 3D driver claims to not support visual 0x4b
(WW) AIGLX: 3D driver claims to not support visual 0x4c
(WW) AIGLX: 3D driver claims to not support visual 0x4d
(WW) AIGLX: 3D driver claims to not support visual 0x4e
(WW) AIGLX: 3D driver claims to not support visual 0x4f
(WW) AIGLX: 3D driver claims to not support visual 0x50
(WW) AIGLX: 3D driver claims to not support visual 0x51
(WW) AIGLX: 3D driver claims to not support visual 0x52
(WW) AIGLX: 3D driver claims to not support visual 0x53
(WW) AIGLX: 3D driver claims to not support visual 0x54
(WW) AIGLX: 3D driver claims to not support visual 0x55
(WW) AIGLX: 3D driver claims to not support visual 0x56
(WW) AIGLX: 3D driver claims to not support visual 0x57
(WW) AIGLX: 3D driver claims to not support visual 0x58
(WW) AIGLX: 3D driver claims to not support visual 0x59
(WW) AIGLX: 3D driver claims to not support visual 0x5a
(WW) AIGLX: 3D driver claims to not support visual 0x5b
(WW) AIGLX: 3D driver claims to not support visual 0x5c
(WW) AIGLX: 3D driver claims to not support visual 0x5d
(WW) AIGLX: 3D driver claims to not support visual 0x5e
(WW) AIGLX: 3D driver claims to not support visual 0x5f
(WW) AIGLX: 3D driver claims to not support visual 0x60
(WW) AIGLX: 3D driver claims to not support visual 0x61
(WW) AIGLX: 3D driver claims to not support visual 0x62
(WW) AIGLX: 3D driver claims to not support visual 0x63
(WW) AIGLX: 3D driver claims to not support visual 0x64
(WW) AIGLX: 3D driver claims to not support visual 0x65
(WW) AIGLX: 3D driver claims to not support visual 0x66
(WW) AIGLX: 3D driver claims to not support visual 0x67
(WW) AIGLX: 3D driver claims to not support visual 0x68
(WW) AIGLX: 3D driver claims to not support visual 0x69
(WW) AIGLX: 3D driver claims to not support visual 0x6a
(WW) AIGLX: 3D driver claims to not support visual 0x6b
(WW) AIGLX: 3D driver claims to not support visual 0x6c
(WW) AIGLX: 3D driver claims to not support visual 0x6d
(WW) AIGLX: 3D driver claims to not support visual 0x6e
(WW) AIGLX: 3D driver claims to not support visual 0x6f
(WW) AIGLX: 3D driver claims to not support visual 0x70
(WW) AIGLX: 3D driver claims to not support visual 0x71
(WW) AIGLX: 3D driver claims to not support visual 0x72
(II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) fglrx(0): Enable the clock gating!
(II) fglrx(0): Setting screen physical size to 381 x 238
(II) config/hal: Adding input device ThinkPad Extra Buttons
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 2.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) ThinkPad Extra Buttons: always reports core events
(**) ThinkPad Extra Buttons: Device: "/dev/input/event6"
(II) ThinkPad Extra Buttons: Found keys
(II) ThinkPad Extra Buttons: Configuring as keyboard
(II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us,no"
(**) Option "xkb_options" "grp:alt_shift_toggle"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(**) TPPS/2 IBM TrackPoint: always reports core events
(**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event8"
(II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
(II) TPPS/2 IBM TrackPoint: Found x and y relative axes
(II) TPPS/2 IBM TrackPoint: Configuring as mouse
(**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
(**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
(**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
(**) TPPS/2 IBM TrackPoint: (accel) filter chain progression: 2.00
(**) TPPS/2 IBM TrackPoint: (accel) filter stage 0: 20.00 ms
(**) TPPS/2 IBM TrackPoint: (accel) set acceleration profile 0
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event9"
(II) Logitech USB Receiver: Found 20 mouse buttons
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Configuring as mouse
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
(**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
(**) Logitech USB Receiver: (accel) filter chain progression: 2.00
(**) Logitech USB Receiver: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Receiver: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us,no"
(**) Option "xkb_options" "grp:alt_shift_toggle"
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event10"
(II) Logitech USB Receiver: Found 1 mouse buttons
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as keyboard
(II) Logitech USB Receiver: Adding scrollwheel support
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us,no"
(**) Option "xkb_options" "grp:alt_shift_toggle"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us,no"
(**) Option "xkb_options" "grp:alt_shift_toggle"
(II) fglrx(0): EDID vendor "LEN", prod id 16438
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 -hsync -vsync (55.7 kHz)
(II) fglrx(0): Modeline "1440x900"x0.0 85.60 1440 1488 1520 1848 900 903 909 926 -hsync -vsync (46.3 kHz)
(II) fglrx(0): EDID vendor "LEN", prod id 16438
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 -hsync -vsync (55.7 kHz)
(II) fglrx(0): Modeline "1440x900"x0.0 85.60 1440 1488 1520 1848 900 903 909 926 -hsync -vsync (46.3 kHz)
Last edited by orjanp (2009-08-12 08:43:13) -
Keyboard not working after suspend to ram
Hi,
I have this problem since I have my notebook. Is a sony vaio cs.
After suspend to ram the keyboard does't work.
I've read in other forums that is a general gnu/linux problem, not only arch, and I think is related with the i8042 driver and generally hp pavillions have it.
cat /var/log/pm-suspend.log:
Initial commandline parameters: --quirk-dpms-suspend
--quirk-dpms-on
--quirk-vbestate-restore
--quirk-vbemode-restore
--quirk-vga-mode3
--quirk-vbe-post
Thu Aug 13 22:39:47 UYT 2009: Running hooks for suspend.
/usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: success.
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux vaio 2.6.30-ARCH #1 SMP PREEMPT Fri Jul 31 07:30:28 CEST 2009 x86_64 Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz GenuineIntel GNU/Linux
Module Size Used by
i915 206216 1
drm 190080 2 i915
i2c_algo_bit 6996 1 i915
joydev 13312 0
snd_hda_codec_realtek 278132 1
btusb 15364 0
bluetooth 65668 1 btusb
fan 5656 0
uvcvideo 68316 0
videodev 42048 1 uvcvideo
v4l1_compat 18228 2 uvcvideo,videodev
v4l2_compat_ioctl32 10992 1 videodev
arc4 2192 2
vboxdrv 1723308 0
ecb 3536 2
snd_seq_dummy 3540 0
cpufreq_powersave 1872 2
sdhci_pci 9200 0
sdhci 20116 1 sdhci_pci
snd_seq_oss 36224 0
snd_hda_intel 31208 2
snd_hda_codec 82128 2 snd_hda_codec_realtek,snd_hda_intel
iwlagn 108980 0
snd_seq_midi_event 8592 1 snd_seq_oss
snd_seq 64640 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 8324 3 snd_seq_dummy,snd_seq_oss,snd_seq
cpufreq_ondemand 9256 0
mmc_core 61984 1 sdhci
snd_hwdep 9976 1 snd_hda_codec
iwlcore 112976 1 iwlagn
snd_pcm_oss 47328 0
snd_mixer_oss 20976 1 snd_pcm_oss
snd_pcm 90872 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
mac80211 211296 2 iwlagn,iwlcore
ohci1394 34180 0
sony_laptop 35224 0
psmouse 60404 0
snd_timer 25344 2 snd_seq,snd_pcm
uhci_hcd 27056 0
ehci_hcd 40668 0
i2c_i801 11632 0
acpi_cpufreq 10272 0
led_class 5112 2 sdhci,iwlcore
battery 14072 0
ieee1394 98880 1 ohci1394
rfkill 13108 5 iwlcore,sony_laptop
thermal 17712 0
video 24268 1 i915
output 3792 1 video
serio_raw 7188 0
snd 76744 15 snd_hda_codec_realtek,snd_seq_oss,snd_hda_intel,snd_hda_codec,snd_seq,snd_seq_device,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 8576 1 snd
snd_page_alloc 10784 2 snd_hda_intel,snd_pcm
cfg80211 78120 3 iwlagn,iwlcore,mac80211
pcspkr 3088 0
intel_agp 33104 1
usbcore 179376 5 btusb,uvcvideo,uhci_hcd,ehci_hcd
i2c_core 26816 4 i915,drm,i2c_algo_bit,i2c_i801
ac 5720 0
sky2 56820 0
button 7216 0
sg 33824 0
freq_table 4528 2 cpufreq_ondemand,acpi_cpufreq
iTCO_wdt 13648 0
iTCO_vendor_support 3828 1 iTCO_wdt
evdev 12928 14
processor 42064 3 acpi_cpufreq
rtc_cmos 13592 0
rtc_core 22212 1 rtc_cmos
rtc_lib 3120 1 rtc_core
ext4 256304 2
mbcache 8980 1 ext4
jbd2 69088 1 ext4
crc16 2096 1 ext4
sr_mod 19460 0
sd_mod 30696 4
cdrom 41288 1 sr_mod
ahci 40992 3
libata 192460 1 ahci
scsi_mod 131736 4 sg,sr_mod,sd_mod,libata
total used free shared buffers cached
Mem: 3907796 1913868 1993928 0 65068 1566872
-/+ buffers/cache: 281928 3625868
Swap: 2441872 0 2441872
success.
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
/usr/lib/pm-utils/sleep.d/55wicd suspend suspend: success.
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
/usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/98smart-kernel-video suspend suspend: success.
/etc/pm/sleep.d/99laptop-mode suspend suspend: success.
/usr/lib/pm-utils/sleep.d/99video suspend suspend: kernel.acpi_video_flags = 0
success.
Thu Aug 13 22:39:50 UYT 2009: performing suspend
Thu Aug 13 22:40:10 UYT 2009: Awake.
Thu Aug 13 22:40:10 UYT 2009: Running hooks for resume
/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
/etc/pm/sleep.d/99laptop-mode resume suspend: success.
/usr/lib/pm-utils/sleep.d/98smart-kernel-video resume suspend: success.
/usr/lib/pm-utils/sleep.d/95led resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
/usr/lib/pm-utils/sleep.d/90clock resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
/usr/lib/pm-utils/sleep.d/55wicd resume suspend: success.
/usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success.
/usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/11netcfg resume suspend: success.
/usr/lib/pm-utils/sleep.d/01grub resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
/usr/lib/pm-utils/sleep.d/00auto-quirk resume suspend: success.
Thu Aug 13 22:40:13 UYT 2009: Finished.
Please ask me for more info if needed.I had this issue for almost a year with my Sony CS190. After a clean install, it still exists. So,
After suspending the keyboard doesn't work, and unbinding/binding i8042 only helps touchpad, not keyboard.
EDIT: PS: Keyboard & Touchpad work fine after hibernate.
cat /var/log/Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH i686
Current Operating System: Linux ArchTiger 2.6.30-ARCH #1 SMP PREEMPT Wed Sep 9 12:37:32 UTC 2009 i686
Build Date: 04 September 2009 03:37:03PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 4 11:01:41 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) Option "DontZap" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0xec0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2a42:104d:903f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x000060f0/8
(--) PCI: (0:0:2:1) 8086:2a43:104d:903f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xd3400000/1048576
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 2.8.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
IGDNG_M
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "DRI" "false"
(II) intel(0): Integrated Graphics Chipset: Intel(R) Mobile Intel® GM45 Express Chipset
(--) intel(0): Chipset: "Mobile Intel® GM45 Express Chipset"
(II) intel(0): Output VGA1 using monitor section Monitor0
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS1 using initial mode 1280x800
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(**) intel(0): Kernel mode setting active, disabling FBC.
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(**) Option "dpms" "true"
(**) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: Disabled
(WW) intel(0): Option "AccelMethod" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 211
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) config/hal: Adding input device Sony Vaio Keys
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Sony Vaio Keys: always reports core events
(**) Sony Vaio Keys: Device: "/dev/input/event10"
(II) Sony Vaio Keys: Found keys
(II) Sony Vaio Keys: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device PS/2 Generic Mouse
(**) PS/2 Generic Mouse: always reports core events
(**) PS/2 Generic Mouse: Device: "/dev/input/event5"
(II) PS/2 Generic Mouse: Found 3 mouse buttons
(II) PS/2 Generic Mouse: Found x and y relative axes
(II) PS/2 Generic Mouse: Configuring as mouse
(**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
(**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
(**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
(**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
(**) PS/2 Generic Mouse: (accel) set acceleration profile 0
(II) PS/2 Generic Mouse: initialized for relative axes.
(II) config/hal: Adding input device Logitech VoIP USB Dual RF Receiver
(**) Logitech VoIP USB Dual RF Receiver: always reports core events
(**) Logitech VoIP USB Dual RF Receiver: Device: "/dev/input/event4"
(II) Logitech VoIP USB Dual RF Receiver: Found 12 mouse buttons
(II) Logitech VoIP USB Dual RF Receiver: Found x and y relative axes
(II) Logitech VoIP USB Dual RF Receiver: Found scroll wheel(s)
(II) Logitech VoIP USB Dual RF Receiver: Found keys
(II) Logitech VoIP USB Dual RF Receiver: Configuring as mouse
(II) Logitech VoIP USB Dual RF Receiver: Configuring as keyboard
(**) Logitech VoIP USB Dual RF Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech VoIP USB Dual RF Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech VoIP USB Dual RF Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Logitech VoIP USB Dual RF Receiver: (accel) keeping acceleration scheme 1
(**) Logitech VoIP USB Dual RF Receiver: (accel) filter chain progression: 2.00
(**) Logitech VoIP USB Dual RF Receiver: (accel) filter stage 0: 20.00 ms
(**) Logitech VoIP USB Dual RF Receiver: (accel) set acceleration profile 0
(II) Logitech VoIP USB Dual RF Receiver: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Logitech VoIP USB Dual RF Receiver
(**) Logitech VoIP USB Dual RF Receiver: always reports core events
(**) Logitech VoIP USB Dual RF Receiver: Device: "/dev/input/event3"
(II) Logitech VoIP USB Dual RF Receiver: Found keys
(II) Logitech VoIP USB Dual RF Receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech VoIP USB Dual RF Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device UVC Camera (05ca:183f)
(**) UVC Camera (05ca:183f): always reports core events
(**) UVC Camera (05ca:183f): Device: "/dev/input/event2"
(II) UVC Camera (05ca:183f): Found keys
(II) UVC Camera (05ca:183f): Configuring as keyboard
(II) XINPUT: Adding extended input device "UVC Camera (05ca:183f)" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event8"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event13"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event7"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) intel(0): No memory allocations
(II) Sony Vaio Keys: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) PS/2 Generic Mouse: Device reopened after 1 attempts.
(II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
(II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) intel(0): No memory allocations
(II) Sony Vaio Keys: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) PS/2 Generic Mouse: Device reopened after 1 attempts.
(II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
(II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) intel(0): Allocate new frame buffer 1024x768 stride 1024
(II) intel(0): Allocate new frame buffer 2960x1050 stride 3072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) intel(0): No memory allocations
(II) Sony Vaio Keys: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) PS/2 Generic Mouse: Device reopened after 1 attempts.
(II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
(II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
(II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) config/hal: removing device AT Translated Set 2 keyboard
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) intel(0): Allocate new frame buffer 2960x800 stride 3072
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) intel(0): Allocate new frame buffer 2960x800 stride 3072
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) config/hal: removing device PS/2 Generic Mouse
(II) PS/2 Generic Mouse: Close
(II) UnloadModule: "evdev"
(II) config/hal: Adding input device PS/2 Generic Mouse
(**) PS/2 Generic Mouse: always reports core events
(**) PS/2 Generic Mouse: Device: "/dev/input/event1"
(II) PS/2 Generic Mouse: Found 3 mouse buttons
(II) PS/2 Generic Mouse: Found x and y relative axes
(II) PS/2 Generic Mouse: Configuring as mouse
(**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
(**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
(**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
(**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
(**) PS/2 Generic Mouse: (accel) set acceleration profile 0
(II) PS/2 Generic Mouse: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.3
(**) Option "Device" "/dev/input/event5"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: removing device PS/2 Generic Mouse
(II) PS/2 Generic Mouse: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device SynPS/2 Synaptics TouchPad
(II) UnloadModule: "synaptics"
(II) config/hal: Adding input device PS/2 Generic Mouse
(**) PS/2 Generic Mouse: always reports core events
(**) PS/2 Generic Mouse: Device: "/dev/input/event1"
(II) PS/2 Generic Mouse: Found 3 mouse buttons
(II) PS/2 Generic Mouse: Found x and y relative axes
(II) PS/2 Generic Mouse: Configuring as mouse
(**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
(**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
(**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
(**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
(**) PS/2 Generic Mouse: (accel) set acceleration profile 0
(II) PS/2 Generic Mouse: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) Synaptics touchpad driver version 1.1.3
(**) Option "Device" "/dev/input/event5"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: removing device Sony Vaio Keys
(II) Sony Vaio Keys: Close
(II) UnloadModule: "evdev"
(II) config/hal: Adding input device Sony Vaio Keys
(**) Sony Vaio Keys: always reports core events
(**) Sony Vaio Keys: Device: "/dev/input/event10"
(II) Sony Vaio Keys: Found keys
(II) Sony Vaio Keys: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: removing device PS/2 Generic Mouse
(II) PS/2 Generic Mouse: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device SynPS/2 Synaptics TouchPad
(II) UnloadModule: "synaptics"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) intel(0): No memory allocations
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
(II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
(II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Sony Vaio Keys: Device reopened after 1 attempts.
(II) config/hal: Adding input device PS/2 Generic Mouse
(**) PS/2 Generic Mouse: always reports core events
(**) PS/2 Generic Mouse: Device: "/dev/input/event1"
(II) PS/2 Generic Mouse: Found 3 mouse buttons
(II) PS/2 Generic Mouse: Found x and y relative axes
(II) PS/2 Generic Mouse: Configuring as mouse
(**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
(**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
(**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
(**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
(**) PS/2 Generic Mouse: (accel) set acceleration profile 0
(II) PS/2 Generic Mouse: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) Synaptics touchpad driver version 1.1.3
(**) Option "Device" "/dev/input/event5"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device AT Raw Set 2 keyboard
(**) AT Raw Set 2 keyboard: always reports core events
(**) AT Raw Set 2 keyboard: Device: "/dev/input/event12"
(II) AT Raw Set 2 keyboard: Found keys
(II) AT Raw Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Raw Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: removing device AT Raw Set 2 keyboard
(II) AT Raw Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device PS/2 Generic Mouse
(II) PS/2 Generic Mouse: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device SynPS/2 Synaptics TouchPad
(II) UnloadModule: "synaptics"
(II) config/hal: removing device Logitech VoIP USB Dual RF Receiver
(II) Logitech VoIP USB Dual RF Receiver: Close
(II) UnloadModule: "evdev"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) intel(0): No memory allocations
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Sony Vaio Keys: Device reopened after 1 attempts.
(II) config/hal: removing device Logitech VoIP USB Dual RF Receiver
(II) Logitech VoIP USB Dual RF Receiver: Close
(II) UnloadModule: "evdev"
(II) config/hal: Adding input device PS/2 Generic Mouse
(**) PS/2 Generic Mouse: always reports core events
(**) PS/2 Generic Mouse: Device: "/dev/input/event1"
(II) PS/2 Generic Mouse: Found 3 mouse buttons
(II) PS/2 Generic Mouse: Found x and y relative axes
(II) PS/2 Generic Mouse: Configuring as mouse
(**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
(**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
(**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
(**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
(**) PS/2 Generic Mouse: (accel) set acceleration profile 0
(II) PS/2 Generic Mouse: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) Synaptics touchpad driver version 1.1.3
(**) Option "Device" "/dev/input/event3"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device Logitech VoIP USB Dual RF Receiver
(**) Logitech VoIP USB Dual RF Receiver: always reports core events
(**) Logitech VoIP USB Dual RF Receiver: Device: "/dev/input/event4"
(II) Logitech VoIP USB Dual RF Receiver: Found keys
(II) Logitech VoIP USB Dual RF Receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech VoIP USB Dual RF Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Logitech VoIP USB Dual RF Receiver
(**) Logitech VoIP USB Dual RF Receiver: always reports core events
(**) Logitech VoIP USB Dual RF Receiver: Device: "/dev/input/event5"
(II) Logitech VoIP USB Dual RF Receiver: Found 12 mouse buttons
(II) Logitech VoIP USB Dual RF Receiver: Found x and y relative axes
(II) Logitech VoIP USB Dual RF Receiver: Found scroll wheel(s)
(II) Logitech VoIP USB Dual RF Receiver: Found keys
(II) Logitech VoIP USB Dual RF Receiver: Configuring as mouse
(II) Logitech VoIP USB Dual RF Receiver: Configuring as keyboard
(**) Logitech VoIP USB Dual RF Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech VoIP USB Dual RF Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech VoIP USB Dual RF Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Logitech VoIP USB Dual RF Receiver: (accel) keeping acceleration scheme 1
(**) Logitech VoIP USB Dual RF Receiver: (accel) filter chain progression: 2.00
(**) Logitech VoIP USB Dual RF Receiver: (accel) filter stage 0: 20.00 ms
(**) Logitech VoIP USB Dual RF Receiver: (accel) set acceleration profile 0
(II) Logitech VoIP USB Dual RF Receiver: initialized for relative axes.
cat /var/log/kernel.log
Oct 4 13:33:04 ArchTiger kernel: PM: Syncing filesystems ... done.
Oct 4 13:33:04 ArchTiger kernel: Freezing user space processes ... (elapsed 0.00 seconds) done.
Oct 4 13:33:04 ArchTiger kernel: Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
Oct 4 13:33:04 ArchTiger kernel: Suspending console(s) (use no_console_suspend to debug)
Oct 4 13:33:04 ArchTiger kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Oct 4 13:33:04 ArchTiger kernel: sd 0:0:0:0: [sda] Stopping disk
Oct 4 13:33:04 ArchTiger kernel: ACPI handle has no context!
Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: PCI INT B disabled
Oct 4 13:33:04 ArchTiger kernel: ACPI handle has no context!
Oct 4 13:33:04 ArchTiger kernel: ACPI handle has no context!
Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PCI INT A disabled
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.2: PCI INT D disabled
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.1: PCI INT B disabled
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.0: PCI INT A disabled
Oct 4 13:33:04 ArchTiger kernel: HDA Intel 0000:00:1b.0: PCI INT A disabled
Oct 4 13:33:04 ArchTiger kernel: ACPI handle has no context!
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PCI INT D disabled
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.1: PCI INT B disabled
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.0: PCI INT A disabled
Oct 4 13:33:04 ArchTiger kernel: [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
Oct 4 13:33:04 ArchTiger kernel: ACPI: Preparing to enter system sleep state S3
Oct 4 13:33:04 ArchTiger kernel: Disabling non-boot CPUs ...
Oct 4 13:33:04 ArchTiger kernel: CPU 1 is now offline
Oct 4 13:33:04 ArchTiger kernel: SMP alternatives: switching to UP code
Oct 4 13:33:04 ArchTiger kernel: CPU0 attaching NULL sched-domain.
Oct 4 13:33:04 ArchTiger kernel: CPU1 attaching NULL sched-domain.
Oct 4 13:33:04 ArchTiger kernel: CPU0 attaching NULL sched-domain.
Oct 4 13:33:04 ArchTiger kernel: CPU1 is down
Oct 4 13:33:04 ArchTiger kernel: Extended CMOS year: 2000
Oct 4 13:33:04 ArchTiger kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Oct 4 13:33:04 ArchTiger kernel: Intel machine check architecture supported.
Oct 4 13:33:04 ArchTiger kernel: Intel machine check reporting enabled on CPU#0.
Oct 4 13:33:04 ArchTiger kernel: Back to C!
Oct 4 13:33:04 ArchTiger kernel: Extended CMOS year: 2000
Oct 4 13:33:04 ArchTiger kernel: Enabling non-boot CPUs ...
Oct 4 13:33:04 ArchTiger kernel: SMP alternatives: switching to SMP code
Oct 4 13:33:04 ArchTiger kernel: Booting processor 1 APIC 0x1 ip 0x6000
Oct 4 13:33:04 ArchTiger kernel: Initializing CPU#1
Oct 4 13:33:04 ArchTiger kernel: Calibrating delay using timer specific routine.. 5059.62 BogoMIPS (lpj=8429792)
Oct 4 13:33:04 ArchTiger kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Oct 4 13:33:04 ArchTiger kernel: CPU: L2 cache: 6144K
Oct 4 13:33:04 ArchTiger kernel: CPU: Physical Processor ID: 0
Oct 4 13:33:04 ArchTiger kernel: CPU: Processor Core ID: 1
Oct 4 13:33:04 ArchTiger kernel: Intel machine check architecture supported.
Oct 4 13:33:04 ArchTiger kernel: Intel machine check reporting enabled on CPU#1.
Oct 4 13:33:04 ArchTiger kernel: x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
Oct 4 13:33:04 ArchTiger kernel: CPU1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06
Oct 4 13:33:04 ArchTiger kernel: CPU0 attaching NULL sched-domain.
Oct 4 13:33:04 ArchTiger kernel: Switched to high resolution mode on CPU 1
Oct 4 13:33:04 ArchTiger kernel: CPU0 attaching sched-domain:
Oct 4 13:33:04 ArchTiger kernel: domain 0: span 0-1 level MC
Oct 4 13:33:04 ArchTiger kernel: groups: 0 1
Oct 4 13:33:04 ArchTiger kernel: CPU1 attaching sched-domain:
Oct 4 13:33:04 ArchTiger kernel: domain 0: span 0-1 level MC
Oct 4 13:33:04 ArchTiger kernel: groups: 1 0
Oct 4 13:33:04 ArchTiger kernel: CPU1 is up
Oct 4 13:33:04 ArchTiger kernel: ACPI: Waking up from system sleep state S3
Oct 4 13:33:04 ArchTiger kernel: i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c)
Oct 4 13:33:04 ArchTiger kernel: i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
Oct 4 13:33:04 ArchTiger kernel: HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xd131d041)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xd670d570)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x5040)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x20200)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x3ff)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xd231d141)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xd560d460)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x6 (was 0x0, writing 0x30300)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xd331d241)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xd450d360)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x6 (was 0x0, writing 0x50400)
Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xd350d350)
Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
Oct 4 13:33:04 ArchTiger kernel: ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x4001)
Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd5700004)
Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
Oct 4 13:33:04 ArchTiger kernel: iwlagn 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
Oct 4 13:33:04 ArchTiger kernel: iwlagn 0000:03:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd4600004)
Oct 4 13:33:04 ArchTiger kernel: iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406)
Oct 4 13:33:04 ArchTiger kernel: ohci1394 0000:06:02.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
Oct 4 13:33:04 ArchTiger kernel: ohci1394 0000:06:02.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xd3500900)
Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
Oct 4 13:33:04 ArchTiger kernel: pci 0000:06:02.2: restoring config space at offset 0x4 (was 0x0, writing 0xd3500800)
Oct 4 13:33:04 ArchTiger kernel: pci 0000:06:02.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
Oct 4 13:33:04 ArchTiger kernel: i915 0000:00:02.0: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:02.1: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.0: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: usb usb3: root hub lost power or was reset
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.1: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: usb usb4: root hub lost power or was reset
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Oct 4 13:33:04 ArchTiger kernel: HDA Intel 0000:00:1b.0: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: usb usb5: root hub lost power or was reset
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: usb usb6: root hub lost power or was reset
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: usb usb7: root hub lost power or was reset
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: ahci 0000:00:1f.2: setting latency timer to 64
Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: iwlagn 0000:03:00.0: Radio Frequency Kill Switch is On:
Oct 4 13:33:04 ArchTiger kernel: Kill switch must be turned off for wireless networking to work.
Oct 4 13:33:04 ArchTiger kernel: ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[d3500000-d35007ff] Max Packet=[2048] IR/IT contexts=[4/4]
Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: Will use DMA mode even though HW doesn't fully claim to support it.
Oct 4 13:33:04 ArchTiger kernel: pci 0000:06:02.2: PME# disabled
Oct 4 13:33:04 ArchTiger kernel: sd 0:0:0:0: [sda] Starting disk
Oct 4 13:33:04 ArchTiger kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 4 13:33:04 ArchTiger kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
Oct 4 13:33:04 ArchTiger kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
Oct 4 13:33:04 ArchTiger kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 4 13:33:04 ArchTiger kernel: ata1.00: configured for UDMA/133
Oct 4 13:33:04 ArchTiger kernel: ata2.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
Oct 4 13:33:04 ArchTiger kernel: pm_op(): usb_dev_resume+0x0/0x30 [usbcore] returns -19
Oct 4 13:33:04 ArchTiger kernel: PM: Device 5-1 failed to resume: error -19
Oct 4 13:33:04 ArchTiger kernel: pm_op(): usb_dev_resume+0x0/0x30 [usbcore] returns -19
Oct 4 13:33:04 ArchTiger kernel: PM: Device 5-1.1 failed to resume: error -19
Oct 4 13:33:04 ArchTiger kernel: pm_op(): usb_dev_resume+0x0/0x30 [usbcore] returns -19
Oct 4 13:33:04 ArchTiger kernel: PM: Device 5-1.2 failed to resume: error -19
Oct 4 13:33:04 ArchTiger kernel: Restarting tasks ... <6>usb 5-1: USB disconnect, address 2
Oct 4 13:33:04 ArchTiger kernel: usb 5-1.1: USB disconnect, address 3
Oct 4 13:33:04 ArchTiger kernel: done.
Oct 4 13:33:04 ArchTiger kernel: usb 5-1.2: USB disconnect, address 4
Oct 4 13:33:05 ArchTiger kernel: i8042.c: Detected active multiplexing controller, rev 1.1.
Oct 4 13:33:05 ArchTiger kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 4 13:33:05 ArchTiger kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12
Oct 4 13:33:05 ArchTiger kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12
Oct 4 13:33:05 ArchTiger kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12
Oct 4 13:33:05 ArchTiger kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12
Oct 4 13:33:05 ArchTiger kernel: sky2 eth0: enabling interface
Oct 4 13:33:05 ArchTiger kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 4 13:33:05 ArchTiger kernel: iwlagn 0000:03:00.0: Radio disabled by HW RF Kill switch
Oct 4 13:33:05 ArchTiger kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Oct 4 13:33:05 ArchTiger kernel: wlan0: Failed to config new BSSID to the low-level driver
Oct 4 13:33:05 ArchTiger kernel: wlan0: direct probe to AP 00:22:75:4c:36:15 try 1
Oct 4 13:33:05 ArchTiger kernel: CPU0 attaching NULL sched-domain.
Oct 4 13:33:05 ArchTiger kernel: CPU1 attaching NULL sched-domain.
Oct 4 13:33:05 ArchTiger kernel: CPU0 attaching sched-domain:
Oct 4 13:33:05 ArchTiger kernel: domain 0: span 0-1 level MC
Oct 4 13:33:05 ArchTiger kernel: groups: 0 1
Oct 4 13:33:05 ArchTiger kernel: CPU1 attaching sched-domain:
Oct 4 13:33:05 ArchTiger kernel: domain 0: span 0-1 level MC
Oct 4 13:33:05 ArchTiger kernel: groups: 1 0
Oct 4 13:33:05 ArchTiger kernel: wlan0: direct probe to AP 00:22:75:4c:36:15 try 2
Oct 4 13:33:05 ArchTiger kernel: wlan0: direct probe to AP 00:22:75:4c:36:15 try 3
Oct 4 13:33:05 ArchTiger kernel: wlan0: direct probe to AP 00:22:75:4c:36:15 timed out
Oct 4 13:33:06 ArchTiger kernel: psmouse serio22: ID: 10 00 64
Oct 4 13:33:06 ArchTiger kernel: sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
Oct 4 13:33:06 ArchTiger kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Oct 4 13:33:07 ArchTiger kernel: input: PS/2 Generic Mouse as /devices/platform/i8042/serio22/input/input23
Oct 4 13:33:07 ArchTiger kernel: Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000
Oct 4 13:33:07 ArchTiger kernel: input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio24/input/input24
Oct 4 13:33:08 ArchTiger kernel: ata2.00: qc timeout (cmd 0xef)
Oct 4 13:33:08 ArchTiger kernel: ata2.00: failed to set xfermode (err_mask=0x4)
Oct 4 13:33:09 ArchTiger kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 4 13:33:09 ArchTiger kernel: ata2.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
Oct 4 13:33:09 ArchTiger kernel: ata2.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
Oct 4 13:33:09 ArchTiger kernel: ata2.00: configured for UDMA/33
Oct 4 13:33:09 ArchTiger kernel: ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x18 t4
Oct 4 13:33:09 ArchTiger kernel: ata2: irq_stat 0x40000001
Oct 4 13:33:09 ArchTiger kernel: ata2: EH complete
Oct 4 13:33:10 ArchTiger kernel: psmouse.c: Mouse at isa0060/serio2/input0 lost synchronization, throwing 2 bytes away.
Oct 4 13:33:17 ArchTiger kernel: eth0: no IPv6 routers present
Oct 4 13:33:29 ArchTiger kernel: psmouse.c: Mouse at isa0060/serio2/input0 lost synchronization, throwing 1 bytes away.
Oct 4 13:33:30 ArchTiger kernel: psmouse.c: Mouse at isa0060/serio2/input0 lost synchronization, throwing 2 bytes away.
Oct 4 13:33:32 ArchTiger kernel: psmouse.c: Mouse at isa0060/serio2/input0 lost synchronization, throwing 2 bytes away.
Oct 4 13:34:04 ArchTiger kernel: usb 5-1: new full speed USB device using uhci_hcd and address 5
Oct 4 13:34:04 ArchTiger kernel: usb 5-1: configuration #1 chosen from 1 choice
Oct 4 13:34:04 ArchTiger kernel: hub 5-1:1.0: USB hub found
Oct 4 13:34:04 ArchTiger kernel: hub 5-1:1.0: 2 ports detected
Oct 4 13:34:04 ArchTiger kernel: usb 5-1.1: new full speed USB device using uhci_hcd and address 6
Oct 4 13:34:05 ArchTiger kernel: usb 5-1.1: configuration #1 chosen from 1 choice
Oct 4 13:34:05 ArchTiger kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.0/input/input25
Oct 4 13:34:05 ArchTiger kernel: generic-usb 0003:046D:C51C.0003: input,hidraw0: USB HID v1.11 Keyboard [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:1d.0-1.1/input0
Oct 4 13:34:05 ArchTiger kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.1/input/input26
Oct 4 13:34:05 ArchTiger kernel: generic-usb 0003:046D:C51C.0004: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:1d.0-1.1/input1
Oct 4 13:34:05 ArchTiger kernel: usb 5-1.2: new full speed USB device using uhci_hcd and address 7
Oct 4 13:34:05 ArchTiger kernel: usb 5-1.2: configuration #1 chosen from 1 choice
cat /var/log/pm-suspend.log
Initial commandline parameters:
Sun Oct 4 13:34:08 EDT 2009: Running hooks for suspend.
/usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: Adding quirks from HAL: --quirk-dpms-on --quirk-dpms-suspend --quirk-vbe-post --quirk-vbemode-restore --quirk-vbestate-restore --quirk-vga-mode-3
success.
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux ArchTiger 2.6.30-ARCH #1 SMP PREEMPT Wed Sep 9 12:37:32 UTC 2009 i686 Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz GenuineIntel GNU/Linux
Module Size Used by
sony_laptop 29520 0
vboxdrv 134376 0
ipv6 277876 14
fuse 60896 2
fan 4392 0
msr 3240 0
cpufreq_ondemand 7672 2
acpi_cpufreq 8624 0
freq_table 3716 2 cpufreq_ondemand,acpi_cpufreq
snd_seq_dummy 2696 0
snd_seq_oss 31168 0
snd_seq_midi_event 7012 1 snd_seq_oss
snd_seq 53744 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
arc4 1732 2
ecb 2788 2
iwlagn 95208 0
sdhci_pci 7300 0
sdhci 17128 1 sdhci_pci
iwlcore 96132 1 iwlagn
mac80211 182976 2 iwlagn,iwlcore
snd_pcm_oss 40352 0
ohci1394 30196 0
mmc_core 52704 1 sdhci
snd_mixer_oss 17540 1 snd_pcm_oss
led_class 3976 2 sdhci,iwlcore
ieee1394 85324 1 ohci1394
battery 10984 0
ac 4360 0
cfg80211 67364 3 iwlagn,iwlcore,mac80211
rfkill 10640 5 sony_laptop,iwlcore
thermal 13888 0
button 5556 0
snd_hda_codec_realtek 206568 1
snd_usb_audio 86304 3
snd_usb_lib 17252 1 snd_usb_audio
snd_rawmidi 21856 1 snd_usb_lib
snd_seq_device 6768 4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
i915 184872 2
processor 35864 3 acpi_cpufreq
joydev 10400 0
drm 154656 2 i915
snd_hda_intel 26664 2
snd_hda_codec 71716 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 7656 2 snd_usb_audio,snd_hda_codec
snd_pcm 73512 6 snd_pcm_oss,snd_usb_audio,snd_hda_intel,snd_hda_codec
snd_timer 21100 2 snd_seq,snd_pcm
snd 58436 21 snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_realtek,snd_usb_audio,snd_rawmidi,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
snd_page_alloc 8876 2 snd_hda_intel,snd_pcm
usbhid 40608 0
hid 42496 1 usbhid
i2c_algo_bit 5864 1 i915
uvcvideo 61040 0
videodev 36544 1 uvcvideo
v4l1_compat 15688 2 uvcvideo,videodev
video 19832 1 i915
btusb 12632 0
bluetooth 56676 1 btusb
output 2884 1 video
psmouse 59644 0
i2c_i801 9656 0
i2c_core 22776 4 i915,drm,i2c_algo_bit,i2c_i801
intel_agp 27484 1
agpgart 32756 2 drm,intel_agp
sg 27928 0
iTCO_wdt 10952 0
iTCO_vendor_support 3080 1 iTCO_wdt
serio_raw 5704 0
bridge 54008 0
sky2 47240 0
evdev 10176 19
stp 2088 1 bridge
llc 5552 2 bridge,stp
tun 13572 0
soundcore 6784 1 snd
rtc_cmos 11212 0
rtc_core 18048 1 rtc_cmos
rtc_lib 2500 1 rtc_core
ext3 134380 3
jbd 48504 1 ext3
mbcache 7080 1 ext3
sr_mod 16612 0
cdrom 36032 1 sr_mod
sd_mod 27328 5
uhci_hcd 23540 0
ehci_hcd 36112 0
usbcore 150160 8 snd_usb_audio,snd_usb_lib,usbhid,uvcvideo,btusb,uhci_hcd,ehci_hcd
ahci 34004 4
libata 168044 1 ahci
scsi_mod 110708 4 sg,sr_mod,sd_mod,libata
total used free shared buffers cached
Mem: 2980024 2880848 99176 0 108764 2400148
-/+ buffers/cache: 371936 2608088
Swap: 1052216 0 1052216
success.
Let me know, if you need any other output.
Thanks
Last edited by Sir_Leon (2009-10-04 17:56:47) -
[SOLVED] Laptop keyboard freezes randomly.
I have Arch dual booted with Windows 8.1 on an Asus K53SM laptop.
Laptop specs are:
* Intel i5 2nd Gen @ 2.5 GHz
* 8GB RAM
* 750 GB Hard disk
* nvidia GT630M 2GB
Right after installing Arch, I installed GNOME as the DE and everything was working fine. Recently, I uninstalled GNOME and installed KDE. I'm experiencing random keyboard freezes. I've tested it with a USB keyboard, so it is not a hardware issue I guess.
* The [<Super> + S] combination to display all workspaces works fine.
* So does the <Alt> + F2, to write commands, but the keys don't work (so can't type anything there).
These freezes are totally random, and the keyboard works fine after 1-2 minutes. Here is the output for Xorg.0.log ->
[ 21.228]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 21.228] X Protocol Version 11, Revision 0
[ 21.228] Build Operating System: Linux 3.17.6-1-ARCH x86_64
[ 21.228] Current Operating System: Linux ape 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64
[ 21.228] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=92ae3f1c-0f63-4de9-9323-487d50c0bd60 rw quiet splash usbcore.old_scheme_first=1
[ 21.228] Build Date: 11 February 2015 08:10:00AM
[ 21.228]
[ 21.228] Current version of pixman: 0.32.6
[ 21.228] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 21.228] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 21.228] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 15 20:18:09 2015
[ 21.333] (==) Using config file: "/etc/X11/xorg.conf"
[ 21.333] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 21.440] (==) ServerLayout "X.org Configured"
[ 21.440] (**) |-->Screen "Screen0" (0)
[ 21.440] (**) | |-->Monitor "Monitor0"
[ 21.456] (**) | |-->Device "Card0"
[ 21.456] (**) |-->Screen "Screen1" (1)
[ 21.456] (**) | |-->Monitor "Monitor1"
[ 21.456] (**) | |-->Device "Card1"
[ 21.456] (**) |-->Input Device "Mouse0"
[ 21.456] (**) |-->Input Device "Keyboard0"
[ 21.456] (==) Automatically adding devices
[ 21.456] (==) Automatically enabling devices
[ 21.456] (==) Automatically adding GPU devices
[ 21.679] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 21.679] Entry deleted from font path.
[ 21.679] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 21.718] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 21.718] Entry deleted from font path.
[ 21.718] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 21.728] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 21.728] Entry deleted from font path.
[ 21.728] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 21.728] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 21.728] Entry deleted from font path.
[ 21.728] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 21.728] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 21.728] Entry deleted from font path.
[ 21.728] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 21.728] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 21.728] Entry deleted from font path.
[ 21.728] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 21.728] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 21.728] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 21.728] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 21.728] (WW) Disabling Mouse0
[ 21.728] (WW) Disabling Keyboard0
[ 21.739] (II) Loader magic: 0x819d80
[ 21.739] (II) Module ABI versions:
[ 21.739] X.Org ANSI C Emulation: 0.4
[ 21.739] X.Org Video Driver: 18.0
[ 21.739] X.Org XInput driver : 21.0
[ 21.739] X.Org Server Extension : 8.0
[ 21.742] (EE) systemd-logind: failed to get session: PID 301 does not belong to any known session
[ 21.743] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 21.745] (--) PCI:*(0:0:2:0) 8086:0126:1043:212e rev 9, Mem @ 0xdc400000/4194304, 0xb0000000/268435456, I/O @ 0x0000e000/64
[ 21.746] (--) PCI: (0:1:0:0) 10de:0de9:1043:212e rev 161, Mem @ 0xdb000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[ 21.746] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 21.763] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 21.763] (II) LoadModule: "glx"
[ 21.856] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 22.220] (II) Module glx: vendor="X.Org Foundation"
[ 22.220] compiled for 1.16.4, module version = 1.0.0
[ 22.220] ABI class: X.Org Server Extension, version 8.0
[ 22.220] (==) AIGLX enabled
[ 22.220] (II) LoadModule: "intel"
[ 22.220] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 22.286] (II) Module intel: vendor="X.Org Foundation"
[ 22.286] compiled for 1.16.3, module version = 2.99.917
[ 22.286] Module class: X.Org Video Driver
[ 22.286] ABI class: X.Org Video Driver, version 18.0
[ 22.286] (II) LoadModule: "nvidia"
[ 22.286] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 22.367] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 22.367] compiled for 4.0.2, module version = 1.0.0
[ 22.367] Module class: X.Org Video Driver
[ 22.374] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 22.375] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 22.375] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 22.375] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 22.375] (II) NVIDIA dlloader X Driver 346.35 Sat Jan 10 20:32:18 PST 2015
[ 22.375] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 22.386] (++) using VT number 7
[ 22.429] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140905
[ 22.483] (II) Loading sub module "fb"
[ 22.483] (II) LoadModule: "fb"
[ 22.483] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 22.502] (II) Module fb: vendor="X.Org Foundation"
[ 22.502] compiled for 1.16.4, module version = 1.0.0
[ 22.502] ABI class: X.Org ANSI C Emulation, version 0.4
[ 22.502] (II) Loading sub module "wfb"
[ 22.502] (II) LoadModule: "wfb"
[ 22.502] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 22.510] (II) Module wfb: vendor="X.Org Foundation"
[ 22.511] compiled for 1.16.4, module version = 1.0.0
[ 22.511] ABI class: X.Org ANSI C Emulation, version 0.4
[ 22.511] (II) Loading sub module "ramdac"
[ 22.511] (II) LoadModule: "ramdac"
[ 22.511] (II) Module "ramdac" already built-in
[ 22.704] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[ 22.704] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 22.704] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 22.704] (==) intel(0): RGB weight 888
[ 22.704] (==) intel(0): Default visual is TrueColor
[ 22.705] (II) intel(0): Output LVDS1 using monitor section Monitor0
[ 22.705] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
[ 22.705] (II) intel(0): Enabled output LVDS1
[ 22.705] (II) intel(0): Output VGA1 has no monitor section
[ 22.705] (II) intel(0): Enabled output VGA1
[ 22.705] (II) intel(0): Output HDMI1 has no monitor section
[ 22.705] (II) intel(0): Enabled output HDMI1
[ 22.705] (II) intel(0): Output DP1 has no monitor section
[ 22.705] (II) intel(0): Enabled output DP1
[ 22.705] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 22.706] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 22.706] (II) intel(0): Enabled output VIRTUAL1
[ 22.706] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[ 22.706] (==) intel(0): TearFree disabled
[ 22.706] (==) intel(0): DPI set to (96, 96)
[ 22.706] (II) Loading sub module "dri2"
[ 22.706] (II) LoadModule: "dri2"
[ 22.706] (II) Module "dri2" already built-in
[ 22.706] (II) Loading sub module "present"
[ 22.706] (II) LoadModule: "present"
[ 22.706] (II) Module "present" already built-in
[ 22.706] (==) NVIDIA(1): Depth 24, (==) framebuffer bpp 32
[ 22.706] (==) NVIDIA(1): RGB weight 888
[ 22.706] (==) NVIDIA(1): Default visual is TrueColor
[ 22.706] (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
[ 22.740] (**) NVIDIA(1): Enabling 2D acceleration
[ 22.740] (EE) NVIDIA(1): Failed to initialize the GLX module; please check in your X
[ 22.740] (EE) NVIDIA(1): log file that the GLX module has been loaded in your X
[ 22.740] (EE) NVIDIA(1): server, and that the module is the NVIDIA GLX module. If
[ 22.740] (EE) NVIDIA(1): you continue to encounter problems, Please try
[ 22.740] (EE) NVIDIA(1): reinstalling the NVIDIA driver.
[ 24.454] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 24.455] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 24.456] (II) NVIDIA(1): NVIDIA GPU GeForce GT 630M (GF108) at PCI:1:0:0 (GPU-0)
[ 24.456] (--) NVIDIA(1): Memory: 2097152 kBytes
[ 24.456] (--) NVIDIA(1): VideoBIOS: 70.08.92.00.fa
[ 24.456] (II) NVIDIA(1): Detected PCI Express Link width: 16X
[ 24.461] (--) NVIDIA(1): Valid display device(s) on GeForce GT 630M at PCI:1:0:0
[ 24.461] (--) NVIDIA(1): CRT-0 (boot, connected)
[ 24.461] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 24.461] (**) NVIDIA(1): Using HorizSync/VertRefresh ranges from the EDID for display
[ 24.461] (**) NVIDIA(1): device CRT-0 (Using EDID frequencies has been enabled on
[ 24.461] (**) NVIDIA(1): all display devices.)
[ 24.463] (==) NVIDIA(1):
[ 24.463] (==) NVIDIA(1): No modes were requested; the default mode "nvidia-auto-select"
[ 24.463] (==) NVIDIA(1): will be used as the requested mode.
[ 24.463] (==) NVIDIA(1):
[ 24.463] (II) NVIDIA(1): Validated MetaModes:
[ 24.463] (II) NVIDIA(1): "CRT-0:nvidia-auto-select"
[ 24.463] (II) NVIDIA(1): Virtual screen size determined to be 1024 x 768
[ 24.473] (WW) NVIDIA(1): CRT-0 does not have an EDID, or its EDID does not contain a
[ 24.473] (WW) NVIDIA(1): maximum image size; cannot compute DPI from CRT-0's EDID.
[ 24.473] (==) NVIDIA(1): DPI set to (75, 75); computed from built-in default
[ 24.473] (--) Depth 24 pixmap format is 32 bpp
[ 24.515] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend
[ 24.515] (==) intel(0): Backing store enabled
[ 24.515] (==) intel(0): Silken mouse enabled
[ 24.516] (II) intel(0): HW Cursor enabled
[ 24.516] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 24.524] (==) intel(0): DPMS enabled
[ 24.525] (==) intel(0): display hotplug detection enabled
[ 24.525] (II) intel(0): [DRI2] Setup complete
[ 24.525] (II) intel(0): [DRI2] DRI driver: i965
[ 24.525] (II) intel(0): [DRI2] VDPAU driver: i965
[ 24.525] (II) intel(0): direct rendering: DRI2 enabled
[ 24.525] (II) intel(0): hardware support for Present enabled
[ 24.525] (--) RandR disabled
[ 24.525] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 24.525] (II) NVIDIA: access.
[ 24.529] (II) NVIDIA(1): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 24.529] (II) NVIDIA(1): may not be running or the "AcpidSocketPath" X
[ 24.529] (II) NVIDIA(1): configuration option may not be set correctly. When the
[ 24.530] (II) NVIDIA(1): ACPI event daemon is available, the NVIDIA X driver will
[ 24.530] (II) NVIDIA(1): try to use it to receive ACPI event notifications. For
[ 24.530] (II) NVIDIA(1): details, please see the "ConnectToAcpid" and
[ 24.530] (II) NVIDIA(1): "AcpidSocketPath" X configuration options in Appendix B: X
[ 24.530] (II) NVIDIA(1): Config Options in the README.
[ 24.536] (II) NVIDIA(1): Setting mode "CRT-0:nvidia-auto-select"
[ 24.649] (==) NVIDIA(1): Disabling shared memory pixmaps
[ 24.649] (==) NVIDIA(1): Backing store enabled
[ 24.649] (==) NVIDIA(1): Silken mouse enabled
[ 24.649] (==) NVIDIA(1): DPMS enabled
[ 24.663] (II) Loading sub module "dri2"
[ 24.663] (II) LoadModule: "dri2"
[ 24.663] (II) Module "dri2" already built-in
[ 24.663] (II) NVIDIA(1): [DRI2] Setup complete
[ 24.663] (II) NVIDIA(1): [DRI2] VDPAU driver: nvidia
[ 24.663] (--) RandR disabled
[ 24.872] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 24.872] (II) AIGLX: enabled GLX_ARB_create_context
[ 24.872] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 24.872] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 24.872] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 24.872] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 24.872] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 24.872] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 24.872] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 24.872] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 24.872] (II) AIGLX: Loaded and initialized i965
[ 24.872] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 24.873] (II) AIGLX: Screen 1 is not DRI2 capable
[ 24.873] (EE) AIGLX: reverting to software rendering
[ 25.619] (II) AIGLX: Loaded and initialized swrast
[ 25.619] (II) GLX: Initialized DRISWRAST GL provider for screen 1
[ 25.634] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 25.640] (II) intel(0): Setting screen physical size to 361 x 203
[ 25.988] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 25.988] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 25.988] (II) LoadModule: "evdev"
[ 25.988] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 26.030] (II) Module evdev: vendor="X.Org Foundation"
[ 26.030] compiled for 1.16.2, module version = 2.9.1
[ 26.030] Module class: X.Org XInput Driver
[ 26.030] ABI class: X.Org XInput driver, version 21.0
[ 26.030] (II) Using input driver 'evdev' for 'Power Button'
[ 26.030] (**) Power Button: always reports core events
[ 26.031] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 26.031] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 26.031] (--) evdev: Power Button: Found keys
[ 26.031] (II) evdev: Power Button: Configuring as keyboard
[ 26.031] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event3"
[ 26.031] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 26.031] (**) Option "xkb_rules" "evdev"
[ 26.031] (**) Option "xkb_model" "pc104"
[ 26.031] (**) Option "xkb_layout" "us"
[ 26.086] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 26.086] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 26.086] (II) Using input driver 'evdev' for 'Video Bus'
[ 26.086] (**) Video Bus: always reports core events
[ 26.086] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 26.086] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 26.086] (--) evdev: Video Bus: Found keys
[ 26.086] (II) evdev: Video Bus: Configuring as keyboard
[ 26.086] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input14/event6"
[ 26.086] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 26.086] (**) Option "xkb_rules" "evdev"
[ 26.086] (**) Option "xkb_model" "pc104"
[ 26.086] (**) Option "xkb_layout" "us"
[ 26.087] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 26.087] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 26.087] (II) Using input driver 'evdev' for 'Video Bus'
[ 26.087] (**) Video Bus: always reports core events
[ 26.087] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 26.087] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 26.087] (--) evdev: Video Bus: Found keys
[ 26.087] (II) evdev: Video Bus: Configuring as keyboard
[ 26.087] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4c/LNXVIDEO:00/input/input13/event5"
[ 26.087] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 26.087] (**) Option "xkb_rules" "evdev"
[ 26.088] (**) Option "xkb_model" "pc104"
[ 26.088] (**) Option "xkb_layout" "us"
[ 26.088] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 26.088] (II) No input driver specified, ignoring this device.
[ 26.088] (II) This device may have been added with another device file.
[ 26.089] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 26.089] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 26.089] (II) Using input driver 'evdev' for 'Sleep Button'
[ 26.089] (**) Sleep Button: always reports core events
[ 26.089] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 26.089] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 26.089] (--) evdev: Sleep Button: Found keys
[ 26.089] (II) evdev: Sleep Button: Configuring as keyboard
[ 26.089] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event2"
[ 26.089] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 26.089] (**) Option "xkb_rules" "evdev"
[ 26.089] (**) Option "xkb_model" "pc104"
[ 26.089] (**) Option "xkb_layout" "us"
[ 26.090] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 26.090] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 26.090] (EE) /dev/dri/card1: failed to set DRM interface version 1.4: Permission denied
[ 26.091] (II) config/udev: Adding input device USB 2.0 UVC VGA WebCam (/dev/input/event12)
[ 26.091] (**) USB 2.0 UVC VGA WebCam: Applying InputClass "evdev keyboard catchall"
[ 26.091] (II) Using input driver 'evdev' for 'USB 2.0 UVC VGA WebCam'
[ 26.091] (**) USB 2.0 UVC VGA WebCam: always reports core events
[ 26.091] (**) evdev: USB 2.0 UVC VGA WebCam: Device: "/dev/input/event12"
[ 26.091] (--) evdev: USB 2.0 UVC VGA WebCam: Vendor 0x13d3 Product 0x5710
[ 26.091] (--) evdev: USB 2.0 UVC VGA WebCam: Found keys
[ 26.091] (II) evdev: USB 2.0 UVC VGA WebCam: Configuring as keyboard
[ 26.091] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input19/event12"
[ 26.091] (II) XINPUT: Adding extended input device "USB 2.0 UVC VGA WebCam" (type: KEYBOARD, id 10)
[ 26.091] (**) Option "xkb_rules" "evdev"
[ 26.091] (**) Option "xkb_model" "pc104"
[ 26.091] (**) Option "xkb_layout" "us"
[ 26.092] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[ 26.092] (II) No input driver specified, ignoring this device.
[ 26.092] (II) This device may have been added with another device file.
[ 26.093] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[ 26.093] (II) No input driver specified, ignoring this device.
[ 26.093] (II) This device may have been added with another device file.
[ 26.093] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[ 26.093] (II) No input driver specified, ignoring this device.
[ 26.093] (II) This device may have been added with another device file.
[ 26.094] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event13)
[ 26.094] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 26.094] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 26.094] (**) Logitech USB Optical Mouse: always reports core events
[ 26.094] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event13"
[ 26.094] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a
[ 26.094] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[ 26.094] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 26.094] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 26.094] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 26.094] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 26.094] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 26.094] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 26.094] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 26.094] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.0/0003:046D:C05A.0001/input/input20/event13"
[ 26.094] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 11)
[ 26.095] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 26.095] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 26.095] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 26.095] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 26.095] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 26.096] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse1)
[ 26.096] (II) No input driver specified, ignoring this device.
[ 26.096] (II) This device may have been added with another device file.
[ 26.096] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event8)
[ 26.096] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 26.096] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[ 26.096] (**) Asus WMI hotkeys: always reports core events
[ 26.096] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event8"
[ 26.096] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[ 26.096] (--) evdev: Asus WMI hotkeys: Found keys
[ 26.096] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[ 26.096] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input15/event8"
[ 26.096] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 12)
[ 26.096] (**) Option "xkb_rules" "evdev"
[ 26.096] (**) Option "xkb_model" "pc104"
[ 26.096] (**) Option "xkb_layout" "us"
[ 26.097] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 26.097] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 26.097] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 26.097] (**) AT Translated Set 2 keyboard: always reports core events
[ 26.097] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 26.098] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 26.098] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 26.098] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 26.098] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 26.098] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 26.098] (**) Option "xkb_rules" "evdev"
[ 26.098] (**) Option "xkb_model" "pc104"
[ 26.098] (**) Option "xkb_layout" "us"
[ 26.099] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[ 26.099] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 26.099] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 26.099] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 26.099] (II) LoadModule: "synaptics"
[ 26.099] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 26.109] (II) Module synaptics: vendor="X.Org Foundation"
[ 26.109] compiled for 1.16.0, module version = 1.8.1
[ 26.109] Module class: X.Org XInput Driver
[ 26.109] ABI class: X.Org XInput driver, version 21.0
[ 26.109] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 26.109] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 26.109] (**) Option "Device" "/dev/input/event7"
[ 26.210] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 26.210] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5762 (res 52)
[ 26.210] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4902 (res 83)
[ 26.210] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 26.210] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 26.210] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 26.210] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 26.210] (**) Option "TapButton1" "1"
[ 26.210] (**) Option "TapButton2" "2"
[ 26.210] (**) Option "TapButton3" "3"
[ 26.210] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 26.210] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 26.263] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input12/event7"
[ 26.263] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[ 26.263] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 26.263] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 26.263] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
[ 26.264] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 26.264] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 26.264] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 26.264] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 26.264] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 26.264] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 26.265] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 26.265] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 26.265] (II) No input driver specified, ignoring this device.
[ 26.265] (II) This device may have been added with another device file.
[ 26.282] removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1 /dev/dri/card1
[ 26.282] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 26.282] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 26.282] (EE) /dev/dri/card1: failed to set DRM interface version 1.4: Permission denied
[ 81.255] (II) intel(0): EDID vendor "AUO", prod id 9964
[ 81.255] (II) intel(0): Printing DDC gathered Modelines:
[ 81.255] (II) intel(0): Modeline "1366x768"x0.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz eP)
[ 81.277] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 81.293] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 81.644] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 81.660] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 81.678] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 84.668] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 84.685] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 86.539] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 2962.717] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 2962.734] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 2966.160] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 2966.176] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 3045.352] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 3045.370] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 3066.487] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 3066.504] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 4507.909] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 4507.925] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 4568.870] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 4568.887] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 4749.685] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 4749.702] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 4841.172] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 4841.189] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 5067.684] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 5067.701] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 5098.091] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 5098.108] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 5231.697] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 5231.715] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 7726.903] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 7726.920] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 7989.858] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 7989.875] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 8118.003] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 8118.020] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 8525.573] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 8525.590] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 8645.496] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 8645.513] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 8787.791] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 8787.808] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 10010.206] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 10010.223] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 10511.439] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 10511.456] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 10576.580] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 10576.597] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 10758.287] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 10758.304] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 12833.372] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 12833.389] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 14722.424] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 14722.441] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 15499.091] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 15499.108] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 16138.293] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 16138.309] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 16563.842] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 16563.858] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 17097.871] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 17097.888] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 17958.793] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 17958.810] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 18046.490] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 18046.506] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 18286.639] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 18286.655] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 18857.140] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 18857.157] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 19683.981] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 19683.997] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 19746.465] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 19746.483] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 19801.499] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 19801.516] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 24516.593] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 24516.610] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 24714.424] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 24714.440] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 24733.954] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 24733.970] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 24794.748] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 24795.935] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 24795.935] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 24795.971] (II) NVIDIA(1): Setting mode "CRT-0:nvidia-auto-select"
[ 24796.039] (II) NVIDIA(1): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 24796.039] (II) NVIDIA(1): may not be running or the "AcpidSocketPath" X
[ 24796.039] (II) NVIDIA(1): configuration option may not be set correctly. When the
[ 24796.039] (II) NVIDIA(1): ACPI event daemon is available, the NVIDIA X driver will
[ 24796.039] (II) NVIDIA(1): try to use it to receive ACPI event notifications. For
[ 24796.039] (II) NVIDIA(1): details, please see the "ConnectToAcpid" and
[ 24796.039] (II) NVIDIA(1): "AcpidSocketPath" X configuration options in Appendix B: X
[ 24796.040] (II) NVIDIA(1): Config Options in the README.
[ 24796.057] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 24796.061] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 25764.817] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 25766.007] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 25766.007] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 25766.036] (II) NVIDIA(1): Setting mode "CRT-0:nvidia-auto-select"
[ 25766.104] (II) NVIDIA(1): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 25766.104] (II) NVIDIA(1): may not be running or the "AcpidSocketPath" X
[ 25766.104] (II) NVIDIA(1): configuration option may not be set correctly. When the
[ 25766.104] (II) NVIDIA(1): ACPI event daemon is available, the NVIDIA X driver will
[ 25766.104] (II) NVIDIA(1): try to use it to receive ACPI event notifications. For
[ 25766.104] (II) NVIDIA(1): details, please see the "ConnectToAcpid" and
[ 25766.104] (II) NVIDIA(1): "AcpidSocketPath" X configuration options in Appendix B: X
[ 25766.104] (II) NVIDIA(1): Config Options in the README.
[ 25766.122] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 25766.129] (EE) evdev: Logitech USB Optical Mouse: Unable to open evdev device "/dev/input/event13".
[ 25766.129] [dix] couldn't enable device 11
[ 25766.129] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 25766.132] (II) config/udev: removing device Logitech USB Optical Mouse
[ 25766.132] (II) evdev: Logitech USB Optical Mouse: Close
[ 25766.132] (II) UnloadModule: "evdev"
[ 27662.047] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 27663.314] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 27663.314] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 27663.345] (II) NVIDIA(1): Setting mode "CRT-0:nvidia-auto-select"
[ 27663.413] (II) NVIDIA(1): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 27663.413] (II) NVIDIA(1): may not be running or the "AcpidSocketPath" X
[ 27663.413] (II) NVIDIA(1): configuration option may not be set correctly. When the
[ 27663.413] (II) NVIDIA(1): ACPI event daemon is available, the NVIDIA X driver will
[ 27663.413] (II) NVIDIA(1): try to use it to receive ACPI event notifications. For
[ 27663.413] (II) NVIDIA(1): details, please see the "ConnectToAcpid" and
[ 27663.413] (II) NVIDIA(1): "AcpidSocketPath" X configuration options in Appendix B: X
[ 27663.413] (II) NVIDIA(1): Config Options in the README.
[ 27663.431] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 27663.439] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 27694.770] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event13)
[ 27694.770] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 27694.770] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 27694.770] (**) Logitech USB Optical Mouse: always reports core events
[ 27694.770] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event13"
[ 27694.770] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a
[ 27694.770] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[ 27694.770] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 27694.770] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 27694.770] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 27694.770] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 27694.770] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 27694.770] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 27694.770] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 27694.770] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.0/0003:046D:C05A.0002/input/input39/event13"
[ 27694.770] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 11)
[ 27694.771] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 27694.771] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 27694.771] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 27694.771] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 27694.771] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 27694.771] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse1)
[ 27694.771] (II) No input driver specified, ignoring this device.
[ 27694.771] (II) This device may have been added with another device file.
[ 28826.102] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 28826.119] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 28869.273] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 28869.290] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 29665.856] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 29665.873] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 29759.751] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 29759.768] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 30246.231] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 30246.248] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 31539.152] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 31539.168] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 33130.297] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 33130.314] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 35115.805] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 35115.822] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 36739.995] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 36740.011] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 37099.972] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 37099.988] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 37115.693] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 37115.709] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 37292.799] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 37292.816] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 37896.583] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 37896.600] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 40947.452] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 40947.469] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 40999.729] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 40999.746] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 41027.146] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 41027.163] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 41198.146] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 41198.162] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 41405.365] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 41405.382] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 43125.113] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 43125.128] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 43212.374] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 43212.391] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 44006.946] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 44008.163] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 44008.163] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 44008.193] (II) NVIDIA(1): Setting mode "CRT-0:nvidia-auto-select"
[ 44008.262] (II) NVIDIA(1): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 44008.262] (II) NVIDIA(1): may not be running or the "AcpidSocketPath" X
[ 44008.262] (II) NVIDIA(1): configuration option may not be set correctly. When the
[ 44008.262] (II) NVIDIA(1): ACPI event daemon is available, the NVIDIA X driver will
[ 44008.262] (II) NVIDIA(1): try to use it to receive ACPI event notifications. For
[ 44008.262] (II) NVIDIA(1): details, please see the "ConnectToAcpid" and
[ 44008.262] (II) NVIDIA(1): "AcpidSocketPath" X configuration options in Appendix B: X
[ 44008.262] (II) NVIDIA(1): Config Options in the README.
[ 44008.280] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 44008.287] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
Please help me to resolve this.
Last edited by vortex_ape (2015-02-22 14:39:47)I haven't been experiencing the issue for some hours.
The issue occurred more frequently when I was compiling something. When I tried to reproduce the issue, it didn't occur.
The interesting thing to note is that I updated the system twice in the past 2 days. I checked the pacman log and saw that xorg-server-common, xorg-server, xorg-server-devel were among the upgraded packages. I guess they were causing the problem.
I'll need to test for a couple of days though before I consider the issue to be resolved. I'll update if the issue persists. -
[SOLVED] Keyboard layout problems
Hi community,
I fresh installed arch linux and I rly like it. After playing a little around and installing the awesome wm I can't set the croatian keyboard layout.
My xorg.config file:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "logicd"
Option "XkbLayout" "hr"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Arnos Instruments F-417"
HorizSync 24.0 - 80.0
VertRefresh 49.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6600 GT"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "DFP-0"
Option "metamodes" "CRT: nvidia-auto-select +1920+0, DFP: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
My Xorg.0.log file:
[ 2186.778]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 2186.778]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 2186.778] X Protocol Version 11, Revision 0
[ 2186.778] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 2186.778] Current Operating System: Linux arch 2.6.34-ARCH #1 SMP PREEMPT Mon Jul 5 22:12:11 CEST 2010 x86_64
[ 2186.778] Kernel command line: root=/dev/sda5 ro
[ 2186.778] Build Date: 21 June 2010 12:01:49PM
[ 2186.778]
[ 2186.779] Current version of pixman: 0.18.2
[ 2186.779] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2186.779] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2186.779] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 22 13:23:50 2010
[ 2186.779] (==) Using config file: "/etc/X11/xorg.conf"
[ 2186.779] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2186.779] (==) ServerLayout "Layout0"
[ 2186.779] (**) |-->Screen "Screen0" (0)
[ 2186.779] (**) | |-->Monitor "Monitor0"
[ 2186.779] (**) | |-->Device "Device0"
[ 2186.779] (**) |-->Input Device "Keyboard0"
[ 2186.779] (**) |-->Input Device "Mouse0"
[ 2186.780] (**) Option "Xinerama" "0"
[ 2186.780] (==) Automatically adding devices
[ 2186.780] (==) Automatically enabling devices
[ 2186.780] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2186.780] Entry deleted from font path.
[ 2186.780] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2186.780] Entry deleted from font path.
[ 2186.780] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 2186.780] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2186.780] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 2186.780] (WW) Disabling Keyboard0
[ 2186.780] (WW) Disabling Mouse0
[ 2186.780] (II) Loader magic: 0x7ce880
[ 2186.780] (II) Module ABI versions:
[ 2186.780] X.Org ANSI C Emulation: 0.4
[ 2186.780] X.Org Video Driver: 7.0
[ 2186.780] X.Org XInput driver : 9.0
[ 2186.780] X.Org Server Extension : 3.0
[ 2186.786] (--) PCI:*(0:1:0:0) 10de:00f1:0000:0000 nVidia Corporation NV43 [GeForce 6600 GT] rev 162, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf9000000/16777216, BIOS @ 0x????????/131072
[ 2186.787] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2186.787] (II) LoadModule: "extmod"
[ 2186.787] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 2186.787] (II) Module extmod: vendor="X.Org Foundation"
[ 2186.787] compiled for 1.8.1.902, module version = 1.0.0
[ 2186.787] Module class: X.Org Server Extension
[ 2186.787] ABI class: X.Org Server Extension, version 3.0
[ 2186.787] (II) Loading extension MIT-SCREEN-SAVER
[ 2186.787] (II) Loading extension XFree86-VidModeExtension
[ 2186.787] (II) Loading extension XFree86-DGA
[ 2186.787] (II) Loading extension DPMS
[ 2186.787] (II) Loading extension XVideo
[ 2186.787] (II) Loading extension XVideo-MotionCompensation
[ 2186.787] (II) Loading extension X-Resource
[ 2186.787] (II) LoadModule: "dbe"
[ 2186.787] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 2186.787] (II) Module dbe: vendor="X.Org Foundation"
[ 2186.787] compiled for 1.8.1.902, module version = 1.0.0
[ 2186.788] Module class: X.Org Server Extension
[ 2186.788] ABI class: X.Org Server Extension, version 3.0
[ 2186.788] (II) Loading extension DOUBLE-BUFFER
[ 2186.788] (II) LoadModule: "glx"
[ 2186.788] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2186.813] (II) Module glx: vendor="NVIDIA Corporation"
[ 2186.813] compiled for 4.0.2, module version = 1.0.0
[ 2186.813] Module class: X.Org Server Extension
[ 2186.813] (II) NVIDIA GLX Module 256.35 Wed Jun 16 19:10:31 PDT 2010
[ 2186.813] (II) Loading extension GLX
[ 2186.813] (II) LoadModule: "record"
[ 2186.814] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 2186.814] (II) Module record: vendor="X.Org Foundation"
[ 2186.814] compiled for 1.8.1.902, module version = 1.13.0
[ 2186.814] Module class: X.Org Server Extension
[ 2186.814] ABI class: X.Org Server Extension, version 3.0
[ 2186.814] (II) Loading extension RECORD
[ 2186.814] (II) LoadModule: "dri"
[ 2186.814] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 2186.814] (II) Module dri: vendor="X.Org Foundation"
[ 2186.814] compiled for 1.8.1.902, module version = 1.0.0
[ 2186.814] ABI class: X.Org Server Extension, version 3.0
[ 2186.814] (II) Loading extension XFree86-DRI
[ 2186.814] (II) LoadModule: "dri2"
[ 2186.814] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2186.814] (II) Module dri2: vendor="X.Org Foundation"
[ 2186.814] compiled for 1.8.1.902, module version = 1.2.0
[ 2186.815] ABI class: X.Org Server Extension, version 3.0
[ 2186.815] (II) Loading extension DRI2
[ 2186.815] (II) LoadModule: "nvidia"
[ 2186.815] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 2186.816] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 2186.816] compiled for 4.0.2, module version = 1.0.0
[ 2186.816] Module class: X.Org Video Driver
[ 2186.816] (II) NVIDIA dlloader X Driver 256.35 Wed Jun 16 18:45:02 PDT 2010
[ 2186.816] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 2186.816] (++) using VT number 7
[ 2186.820] (II) Primary Device is: PCI 01@00:00:0
[ 2186.820] (II) Loading sub module "fb"
[ 2186.820] (II) LoadModule: "fb"
[ 2186.820] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2186.821] (II) Module fb: vendor="X.Org Foundation"
[ 2186.821] compiled for 1.8.1.902, module version = 1.0.0
[ 2186.821] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2186.821] (II) Loading sub module "wfb"
[ 2186.821] (II) LoadModule: "wfb"
[ 2186.821] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 2186.821] (II) Module wfb: vendor="X.Org Foundation"
[ 2186.821] compiled for 1.8.1.902, module version = 1.0.0
[ 2186.821] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2186.821] (II) Loading sub module "ramdac"
[ 2186.821] (II) LoadModule: "ramdac"
[ 2186.821] (II) Module "ramdac" already built-in
[ 2186.821] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 2186.821] (==) NVIDIA(0): RGB weight 888
[ 2186.821] (==) NVIDIA(0): Default visual is TrueColor
[ 2186.821] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 2186.821] (**) NVIDIA(0): Option "TwinView" "1"
[ 2186.822] (**) NVIDIA(0): Option "MetaModes" "CRT: nvidia-auto-select +1920+0, DFP: nvidia-auto-select +0+0"
[ 2186.822] (**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "DFP-0"
[ 2186.822] (**) NVIDIA(0): Enabling RENDER acceleration
[ 2186.822] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 2186.822] (II) NVIDIA(0): enabled.
[ 2188.363] (II) NVIDIA(0): NVIDIA GPU GeForce 6600 GT (NV43) at PCI:1:0:0 (GPU-0)
[ 2188.363] (--) NVIDIA(0): Memory: 131072 kBytes
[ 2188.363] (--) NVIDIA(0): VideoBIOS: 05.43.02.39.00
[ 2188.363] (II) NVIDIA(0): Detected AGP rate: 8X
[ 2188.363] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 2188.363] (--) NVIDIA(0): Connected display device(s) on GeForce 6600 GT at PCI:1:0:0:
[ 2188.363] (--) NVIDIA(0): Arnos Instruments F-417 (CRT-0)
[ 2188.363] (--) NVIDIA(0): ViewSonic VX2433wm (DFP-0)
[ 2188.363] (--) NVIDIA(0): Arnos Instruments F-417 (CRT-0): 400.0 MHz maximum pixel
[ 2188.363] (--) NVIDIA(0): clock
[ 2188.363] (--) NVIDIA(0): ViewSonic VX2433wm (DFP-0): 155.0 MHz maximum pixel clock
[ 2188.363] (--) NVIDIA(0): ViewSonic VX2433wm (DFP-0): Internal Single Link TMDS
[ 2188.363] (**) NVIDIA(0): TwinView enabled
[ 2188.363] (II) NVIDIA(0): Display Devices found referenced in MetaMode: CRT-0, DFP-0
[ 2188.364] (II) NVIDIA(0): Assigned Display Devices: CRT-0, DFP-0
[ 2188.364] (II) NVIDIA(0): Validated modes:
[ 2188.364] (II) NVIDIA(0):
[ 2188.364] (II) NVIDIA(0): "CRT:nvidia-auto-select+1920+0,DFP:nvidia-auto-select+0+0"
[ 2188.364] (II) NVIDIA(0): Virtual screen size determined to be 3200 x 1080
[ 2188.364] (--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
[ 2188.364] (--) NVIDIA(0): option
[ 2188.364] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 2188.364] (--) Depth 24 pixmap format is 32 bpp
[ 2188.365] (II) NVIDIA(0): Initialized AGP GART.
[ 2188.373] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 2188.373] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 2188.373] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 2188.373] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 2188.373] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 2188.373] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 2188.373] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 2188.373] (II) NVIDIA(0): Config Options in the README.
[ 2188.373] (II) NVIDIA(0): Setting mode
[ 2188.373] (II) NVIDIA(0): "CRT:nvidia-auto-select+1920+0,DFP:nvidia-auto-select+0+0"
[ 2188.613] (II) Loading extension NV-GLX
[ 2188.657] (II) NVIDIA(0): Initialized OpenGL Acceleration
[ 2188.659] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 2188.659] (II) NVIDIA(0): Initialized X Rendering Acceleration
[ 2188.659] (==) NVIDIA(0): Backing store disabled
[ 2188.659] (==) NVIDIA(0): Silken mouse enabled
[ 2188.660] (**) NVIDIA(0): DPMS enabled
[ 2188.660] (II) Loading extension NV-CONTROL
[ 2188.661] (II) Loading extension XINERAMA
[ 2188.661] (II) Loading sub module "dri2"
[ 2188.661] (II) LoadModule: "dri2"
[ 2188.661] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2188.661] (II) NVIDIA(0): [DRI2] Setup complete
[ 2188.661] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 2188.661] (==) RandR enabled
[ 2188.661] (II) Initializing built-in extension Generic Event Extension
[ 2188.661] (II) Initializing built-in extension SHAPE
[ 2188.661] (II) Initializing built-in extension MIT-SHM
[ 2188.661] (II) Initializing built-in extension XInputExtension
[ 2188.661] (II) Initializing built-in extension XTEST
[ 2188.661] (II) Initializing built-in extension BIG-REQUESTS
[ 2188.661] (II) Initializing built-in extension SYNC
[ 2188.661] (II) Initializing built-in extension XKEYBOARD
[ 2188.661] (II) Initializing built-in extension XC-MISC
[ 2188.661] (II) Initializing built-in extension SECURITY
[ 2188.661] (II) Initializing built-in extension XINERAMA
[ 2188.661] (II) Initializing built-in extension XFIXES
[ 2188.661] (II) Initializing built-in extension RENDER
[ 2188.661] (II) Initializing built-in extension RANDR
[ 2188.661] (II) Initializing built-in extension COMPOSITE
[ 2188.661] (II) Initializing built-in extension DAMAGE
[ 2188.664] (II) Initializing extension GLX
[ 2188.842] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 2188.842] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2188.842] (II) LoadModule: "evdev"
[ 2188.842] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2188.842] (II) Module evdev: vendor="X.Org Foundation"
[ 2188.842] compiled for 1.8.0, module version = 2.4.0
[ 2188.842] Module class: X.Org XInput Driver
[ 2188.842] ABI class: X.Org XInput driver, version 9.0
[ 2188.842] (**) Power Button: always reports core events
[ 2188.842] (**) Power Button: Device: "/dev/input/event2"
[ 2188.842] (II) Power Button: Found keys
[ 2188.842] (II) Power Button: Configuring as keyboard
[ 2188.842] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 2188.842] (**) Option "xkb_rules" "evdev"
[ 2188.843] (**) Option "xkb_model" "evdev"
[ 2188.843] (**) Option "xkb_layout" "us"
[ 2188.883] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 2188.883] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2188.883] (**) Power Button: always reports core events
[ 2188.883] (**) Power Button: Device: "/dev/input/event1"
[ 2188.883] (II) Power Button: Found keys
[ 2188.883] (II) Power Button: Configuring as keyboard
[ 2188.883] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 2188.883] (**) Option "xkb_rules" "evdev"
[ 2188.883] (**) Option "xkb_model" "evdev"
[ 2188.883] (**) Option "xkb_layout" "us"
[ 2188.887] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event3)
[ 2188.887] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 2188.887] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 2188.887] (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event3"
[ 2188.887] (II) Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
[ 2188.887] (II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 2188.887] (II) Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 2188.887] (II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 2188.887] (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 2188.887] (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 2188.887] (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2188.887] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
[ 2188.887] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 2188.887] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 2188.887] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 2188.887] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 2188.887] (II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 2188.887] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 2188.887] (II) No input driver/identifier specified (ignoring)
[ 2188.888] (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event4)
[ 2188.888] (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 2188.888] (**) Logitech USB Multimedia Keyboard: always reports core events
[ 2188.888] (**) Logitech USB Multimedia Keyboard: Device: "/dev/input/event4"
[ 2188.888] (II) Logitech USB Multimedia Keyboard: Found keys
[ 2188.888] (II) Logitech USB Multimedia Keyboard: Configuring as keyboard
[ 2188.888] (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD)
[ 2188.888] (**) Option "xkb_rules" "evdev"
[ 2188.888] (**) Option "xkb_model" "evdev"
[ 2188.888] (**) Option "xkb_layout" "us"
[ 2188.888] (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event5)
[ 2188.889] (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 2188.889] (**) Logitech USB Multimedia Keyboard: always reports core events
[ 2188.889] (**) Logitech USB Multimedia Keyboard: Device: "/dev/input/event5"
[ 2188.889] (II) Logitech USB Multimedia Keyboard: Found keys
[ 2188.889] (II) Logitech USB Multimedia Keyboard: Configuring as keyboard
[ 2188.889] (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD)
[ 2188.889] (**) Option "xkb_rules" "evdev"
[ 2188.889] (**) Option "xkb_model" "evdev"
[ 2188.889] (**) Option "xkb_layout" "us"
[ 2188.891] (II) config/udev: Adding input device PC Speaker (/dev/input/event0)
[ 2188.891] (II) No input driver/identifier specified (ignoring)
Xorg.0.log important (I think):
[ 2188.888] (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event4)
[ 2188.888] (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 2188.888] (**) Logitech USB Multimedia Keyboard: always reports core events
[ 2188.888] (**) Logitech USB Multimedia Keyboard: Device: "/dev/input/event4"
[ 2188.888] (II) Logitech USB Multimedia Keyboard: Found keys
[ 2188.888] (II) Logitech USB Multimedia Keyboard: Configuring as keyboard
[ 2188.888] (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD)
[ 2188.888] (**) Option "xkb_rules" "evdev"
[ 2188.888] (**) Option "xkb_model" "evdev"
[ 2188.888] (**) Option "xkb_layout" "us"
[ 2188.888] (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event5)
[ 2188.889] (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 2188.889] (**) Logitech USB Multimedia Keyboard: always reports core events
[ 2188.889] (**) Logitech USB Multimedia Keyboard: Device: "/dev/input/event5"
[ 2188.889] (II) Logitech USB Multimedia Keyboard: Found keys
[ 2188.889] (II) Logitech USB Multimedia Keyboard: Configuring as keyboard
[ 2188.889] (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD)
[ 2188.889] (**) Option "xkb_rules" "evdev"
[ 2188.889] (**) Option "xkb_model" "evdev"
[ 2188.889] (**) Option "xkb_layout" "us"
Why is he adding the keyboard 2 times, and why "xkb_layout" "us"? I need hr (croatian).
My first post Sorry, for the bad english.
Last edited by b3no (2010-07-22 23:45:29)[ 2186.780] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
Add this
Section "ServerFlags"
Option "AllowEmptyInput" "no"
EndSection
EditL If the above didn't help, read this http://wiki.archlinux.org/index.php/Xor … d_settings
Last edited by karol (2010-07-22 12:06:04)
Maybe you are looking for
-
iTunes was unable to load data class information from Sync Services. Reconnect or try again later. This is the message when I try to connect my iphone 4 to my computer. If anyone could help me with this, I would appreciate it.
-
Downloads do not finish in Safari and Firefox
Hey guys, new to this forum, so be easy on me... I just bought a Macboko Unibody a few weeks ago, and for some reason, when I try and download certain files, they don't completely download, however Safari and Firefox believe they're complete (i.e. an
-
Javax.security.auth.AuthPermission createLoginContext.Userpass
Hi, I am working on authentication using JAAS. I have created small application and calling it in one of the jsp file. When I try to access the jsp I am getting the following error: createLoginContext.Userpass : access denied (javax.security.auth.Aut
-
How can I make chromium to open PDF files directly in okular?
Hi all, I switched from firefox to chromium and there is one thing that I would like to have solved: At the moment, the only way to open PDF files from the web is to first save them locally and open them afterwards from the chromium statusbar or from
-
hi MM guru.... when we initially up load material through MB1C movement type 561...show the massage document no xxxxxxx posted..but in MMBE not showing..even in MB51 not showing that document no... kindly suggest me regards aqueel