No keyboard when installing Windows XP on Satellite P300 PSPCCA

Ok I just got my new 500GB HDD and slipstreamed XP with the SATA drivers so XP can see the HDD and that part works fine.
But now after XP loads its files and I get to the part where you can choose between setting up XP on the selected partition (ENTER key), create a partition (C key) or delete a partition (D key) NONE of them work, not even the F3 key to quit.
Does the keyboard need a driver to be slipstreamed as well or is there a setting in the BIOS that needs to be changed? Any suggestions.

Xp has finished loading now and the keyboard is working fine. Don't know what happened, will be trying an experiment with . I'm going to try to load Windows 7 to a partition and then format it and then copy Vista over and see if I can get it to work. Have to try this way because I don't know if the recovery files will allow a new installation. If it doesn't then I will try XP again and find out if the keyboard stops again. Will let you know if it happens again.

Similar Messages

  • The keyboard and trackpad on MacBook Air (13-inch, Mid 2013) computers may stop functioning at the Personalize step when installing Windows 7 64bit

    The keyboard and trackpad on MacBook Air (13-inch, Mid 2013) computers may stop functioning at the Personalize step when installing Windows 7 64bit.

    1. Reset PRAM.  http://support.apple.com/kb/PH4405
    2. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.

  • Boot camp not recognize keyboard and mouse when installing windows 7 pro 64 bit

    Hi,
    I have some issue when installing windows 7 pro 64 bit using boot camp. after done partitioning the windows drive and when boot to windows installation process, i've got stuck in the first screen when choosing the language. it seems that the keyboard and mouse are not detected.
    i'm using boot camp ver. 5.0.
    does anyone have similar problem with me?

    I have finally successfully installed Windows 7 x64 on MacBook Air 13.3" (2013) thru Bootcamp.
    Problem:  After Windows 7 install thru BootCamp, I got to the first login screen and not input devices (Mouse, keyboard, USB) worked.   I tried to boot into Windows Safemode, but I received the error  "Windows can not complete installation in Safe Mode".
    Cause:  WIndows 7 does not have native USB 3.0 drivers, included on the install images.
    Resolution:  I downloaded the latest device drivers with thru BootCamp and copied them to the USB Flash Drive that had my bootable Windows 7 x64 install on it.  The second option in BootCamp is "Download Support Media".  This does more than just download drivers.  It creates a file called "autoattended.xml".  This is key as it tells Windows during the install process to use the device drivers that you download.  Otherwise, you need to do it manually, which you can't because you have no mouse or keyboard.
    NOTE:  I had no need of a super drive because I had all the files on one USB flash drive.  Therefore, I don't think it matter which side of the MBA the USB drive was plugged in, as other solutions suggested.

  • HT4407 When installing Windows 7 using Bootcamp, I get message: "Need 64-bit Windows Installation USB drive or DVD."  I thought my install disk was for 32 or 64 bit.  What does this mean?

    When Installing Windows 7 using Bootcamp, I get message:  "Need 64 bit Windows installation USB drive or DVD."  What does this mean?

    It means you need the 64 bit Version of Windows on a USB stick or DVD.

  • Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.)

    Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.). I made a clean installation because I needed to go from 32 bit to 64 bit.
    Or should I just update bootcamp in Lion? (cause when I search for "boot camp" in Windows 7 there's no result)

    Installation Guide
    Instructions for all features and settings.
    Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ Answers to commonly asked Windows 7 questions.
    Apple Boot Camp Support
    Lion's Boot Camp Assistant 4.x should have downloaded Apple drivers as part of also partitioning.
    You need Apple drivers. And you then need to add on your own audio driver.
    You can run Assistant at any time to download and save a set of drivers.

  • Error when installing windows 7

    Hello... When installing Windows 7 Ultimate, I'm getting an error during the windows installation setup. I get the error 0x800024. I choose the correct partition, click install, and this error shows.
    I'm on a mac pro and on snow leopard. I have boot camp 3.0.1, which doesn't show windows 7 when it's about to reboot into the installation screen. Is there anything I can do?

    Have you looked here?
    http://support.apple.com/kb/HT3986
    Supposedly you need BootCamp 3.1 for Windows 7.
    On a MacPro you can't have the Mac OS in slot 1 if you going to install Windows on a second drive. Just put the blank one in slot #1 (that you want Windows on) and then Mac OS drive in slot #2, #3 or #4 and it should work then.
    Boot Camp can only use up to 2 partitions, Mac as #1 and/or Windows as #2. No 3rd partition. You have to have enough free space to use Boot Camp. If you have a 300 gig disk and you have 200 gigs worth of space used up it will only see the 100 gig of space left. And if it's an old disk you may not have enough CONTINUOUS space for it. The files may be all over and it can't find enough free space.
    If on a second (blank) disk what I did was use Disk Utility to format/partition (UFS, Journaled) the whole disk as 1 partition and then let Boot Camp/Windows 7 (I used XP) repartition the disk as NTFS as the first partition (for XP) and left the second (for storage) alone. Or in your case just let Boot Camp/Windows partition it as one NTFS.
    You have to tell it which one to use. If you don't have a choice then set the partition larger then 32 gigs then you should only have one choice, NTFS.
    The Mac can't write to an NTFS disk so it can't make a NTFS partition. So that is why you just partition it like you would if you were only putting the Mac on it. (On an already blank disk). Then when Boot Camp/Windows takes over then Windows can write the NTFS partition.
    The same with a Mac already on a hard drive. 1 partition. Boot Camp/Windows will then make the 2nd partition an NTFS partition (or what ever you want).
    Hope this helps....

  • HP Deskjet Ink Advantage K209a Driver not found when installing windows 8

    MY  PRINTER " HP Deskjet Ink Advantage K209a"  OPERATING SYSTEM  Windows 8 32 bit
    Driver not found when installing windows 8 .So,please give me a suggestion & give me new driver for win 8.
    [Personal Information Removed]
    Please give me a suggestion

    Hey 101214,
    I see you have a Windows 8 PC and a Deskjet Ink Advantage All-in-One printer (K209a).  I also see that you need a driver link for this OS and Printer.  Please follow the link below to download the driver for this printer/OS combo.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-109242-1&cc=us&dlc=en&lc=en...
    If you need information on how to perform the USB installation on your Windows 8 PC please click here.
    I wish you the best!
    Jason
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • Cs12 trial not responding when installed, windows 7 64bit...how to fix??

    cs12 trial not responding when installed, windows 7 64bit...how to fix??
    Not a very good recommendation for buying the app!!!!
    Does anyone at Adobe follow these questions???  If so please respond (your app will not!!)

    Hi wcarlstrom,
    Adobe CS12 is unheard of. Adobe Creative Suite's latest version is CS6.
    Please be specific as to what software you are trying to install, OS version etc so that I may be able to help you.

  • How to fix the mouse and keyboard freezing when installing Windows 7 on 27' iMac late 2013?

    Hi, I have a question for u guys who can solve this.
    I recently bought the new 27' iMac late 2013, and I installed some softwares and used it for few days.
    Before I bought this I used the 15' Macbook Pro Retina, I installed Windows 7 Home Premium 64 bit, and I used the Windows for gaming.
    So back to my question.
    So I bought the new iMac and I was tying to install Windows 7 Home Premium 64 bit (with the same CD).
    After dividing the partition, and other stuff, the iMac rebooted and I hold down the option (alt) key. I choose the Windows CD, and it said it is "getting ready to install Windows". I let it load, and the blue screen where you choose the language, time/location and keyboard input popped up. At the bottom right corner (at the same page), there is a button that said "Next (N)" which u need to click it to go to the next step. I was moving my mouse to click the button, but I realized that my mouse and keyboard was frozen. I tried both wireless and wired mouse and keyboard but they didn't work. There was nothing I could do. I hold the power button, (that was the only option) and tried my mouse and keyboard on Mac OS and it worked fine.
    I thought something went wrong in the CD so I bought the Windows 7 Ultimate 64 bit. The result was same. It frizzed again. (I just wast few hundred $)
    Latter my friend lend me his Windows 8.1 Pro 64 bit. I tried it, and it worked, it didn't freezed on Windows 8.
    The problem is I played Battlefield 4, Titan fall, and Watch Dogs, and Battlefield 4 multiplayer doesn't work on Windows 8.1. Even though when it works on Windows 8, I prefer using Windows 7.
    Dose anyone knows how to fix this freezing thing?
    My computer is:
    27' iMac late 2013 (bought it just few days ago)
    I did no upgrades when I bought it, except the graphic card.
    I bought the iMac in Korean Apple Store, and my Windows CD is in Korean, can that be a problem?
    Please leave a comment when u think u can solve my problem.

    See -> http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf.
    In addition to the Windows disc (or USB flash drive with the Windows installer) you'll need a 8GB+ flash drive.
    The referenced manual - on page 3, I think, gives you a run-down of what you'll need before you begin the installation. You may also want to post any further Boot Camp questions in the Boot Camp forum -> https://discussions.apple.com/community/windows_software/boot_camp.
    Good luck,
    Clinton

  • Satellite L500-21T - Stop error code when installing Windows 7

    Hello
    I bought a notebook Satellite L500-21T from saudi arabia.
    I lost the hd recovery during trying fix windows 7 installation. If I try to install windows 7 I get stop code 0x0000009c error. If I turn sata to compitibality from AHCI Windows xp sp2 not sp3 installed but most drivers like display and wlan not installed. Trying to update BIOS give that is not suitable for that the phoenix version of bios 1.5
    I changed HD and RAM but the same problem. It may the BIOS?
    plz help me

    Hi buddy,
    Do you install Windows 7 from Toshiba recovery disk or normal Microsoft disk?
    Usually if you install Windows 7 from recovery disk, everything should work well because its pretested image from Toshiba and you get back out of box settings (factory settings).
    If not it seems to be a hardware malfunction
    By the way: Try to load the default settings in BIOS. You can do this if you press F9 key in BIOS.

  • How to install Windows XP in Satellite Pro L300-1A9?

    Hi!,
    first of all, sorry if I'm asking something really obvious, but I'm quite new with this issues...also sorry for my English, I'm not native.
    I have a Toshiba Satellite Pro L300 1A9 with Windows Vista preinstalled but the thing is I prefer Windows XP. I have tried to install it but it won't work.
    I have read lots of posts and comments about this issue in this forum and also in the web. The problem is I don't know if the procedure and the drivers to download are the same for all the L300 models. Mine is L300 1A9.
    Anyone could give me some extra simply instructions (I'm a beginner) about how to do solve this problem or any link relating this issue? I have seen many of them, but none about this model L300 1A9.
    Thank you very much!!

    Hi Lars_3,
    thank you very much for your reply and interest.
    When I say that installing Windows XP doesn't work, I mean that my laptop has Windows Vista but I have tried to reinitialized (format) it to install Windows XP, but when I run the Windows XP (original) disk an error message pops up and I can't continue the installation.
    I have had a look to the Toshiba's downloads link you posted, but there's no mention to the L series model. The options available are for M-Series and Net-Book series, so I wonder if it is possible to use one of them for my Toshiba Satellite Pro L300 1A9?
    Thank you very much for your kind help!

  • Boot Camp: Black Screen when installing Windows 7

    Hey guys, I have an intel 27' iMac. 4 days ago I removed windows 7 because there was an issue with the system (it didn't let me run Maya), so I attempted to install windows 7 again, but the problem was that my internal disk drive doesn't work. (Tried multiple ways of fixing it) Then I bought an external disk drive, hoping that this would fix everything, I was able to partition my windows 7, but when the mac restarts for the first time I'm introduced by a black screen with a small blinking dash top-left of the screen. So I found a fix for it, I got a USB renamed it to MBRFAT or MRBFAT don't remember exactly (I'm on a different computer) and did everything the internet told me to do. To my surprise, it made the blinking dash disappear, but I was introduced with yet another error. Bootmgr is missing, these 4 days were filled with complete bad luck. Please help me out here.
    Too long; didn't read version: When the iMac restarts for the first time, a black screen appears with a Bootmgr error, telling me to press any key, although I keep pressing it on my USB mac keyboard nothing happens.

    Help

  • Bootcamp hangs when installing Windows 7 on Macbook Air

    I purchased a new Macbook air less than 1 month ago. 256GB SSD drive, maximum RAM. It's running OS X Lion (10.7.1). I plugged in a USB DVD drive, keyboard, and mouse.
    When trying to install Windows 7 64-bit Bootcamp Assistant creates the partition, creates the windows driver disk, then reboots to install windows from my retail version of Windows 7 Home Premium (DVD.) It hangs with the progress bar about 10% of the way across. The message "windows is loading files" is displayed. I waited a full 45 minutes but nothing changed. Help!

    Look at your SSD. See if there is an issue, firmware update, etc.
    not all SSDs work - some work in one OS and not the other, the Mac 2011s have been known to have issues with their SATA3 cable interface and chipset.
    Apple and Intel and others have all issued fimrware updates.
    In some cases people have just sent back their MBP because they were such problem, and that just running Mac OS, not even Windows.

  • Cannot install Windows 7 on Satellite L550

    I have a notebook Toshiba Satellite L550-13C.
    I had problems with my laptop i couldn't start it i managed to boot my pc to windows xp with no drivers.
    I have downloaded most of the drivers now I and to go back to windows 7 but it doest recognize the setip file when i click on it it says infalid win32 something like that whatwhat sould do??
    And no i cant do it when i boot the pc it makes another problem
    So how can i fix this not recognize thing do i need too download a driver or something like that
    Need heeeelp :(

    Hello
    Your posting is pretty confusing and it is not easy to understand you.
    I dont understand which setup file you want to use but you cannot install operating system with click on some setup file.
    You can install Windows 7 using Toshiba recovery image (if you got one) or using original Microsoft Windows 7 installation disc.
    So please be nice and explain to me which disc do you have and how do you try to install Windows 7.

  • Error 0x80300024 When Installing Windows 7 Using Bootcamp

    Hi.  I'm trying to install windows on my mac mini.  I have a 2010 mini server with dual 500gb hard drives.  I want to have one disc for apple and the other disc for windows.  When I try the install I get the windows error 0x80300024.  After some research I found a straightforward, but not easy solution.  It seems windows freaks out when it sees more than one physical hard drive.  Therefore the solution is to disconnect the cables for the other hard drive, install windows on the target drive, then reconnect the cables to the other drive.  I rather not tear open the mini and do this as it looks a little painful.  Anyone have a suggestion on how to get around this?  And yes, I know it's a windows issue but i figured there must be some mini users who've experienced this issue.
    Thanks.
    Craig

    Hi Graig,
    One possble solution here, with maybe alt key to boot your Windows installer instead of the c key...
    PrincessPeachJun 17, 2009, 06:48 PM
    I just installed it today (twice actually, after changing my mind about something) so I can tell you how to do it. What I did was completely ignore Boot Camp and used Disk Utility to format the intended Windows drive as FAT32/Master Boot Record. Then I just rebooted with C held down and the Windows 7 CD took care of the rest.
    I have a 2009 Mac Pro so all my drivers etc were on my OS disc. If you need to burn the drivers, by all means use Boot Camp just for that part
    I got a warning in Windows 7 that Boot Camp had issues with the RC but it has been rock solid so far.
    http://forums.macrumors.com/archive/index.php/t-722467.html

Maybe you are looking for

  • Satellite P300-18M - AC adapter is dead

    Cable melted today around the square plug that goes into laptop. You can see the wires, lately adapter has been buzzing/making insect noises. It's still under warranty. Will Toshiba provide a replacement adapter and how long is it gonna take for me t

  • How to use Double selection If statements?

    Ok, this is what I have to do: Present a menu to the user from which there will be 6 choices, A = add three number, S = subtract 2 numbers, M = multiply three numbers, D = divide two numbers, O = modulus two numbers, E = Exit. 2) If the user enters a

  • Language issue for sold to party in sales order

    Hi, we have a sold to party A which is in china. the address for the same is maintained in local version and inetrnational version while creating customer master for A. we aslo have a sold to party B, which is in Greece. the address for the same is m

  • System Preferences Not Working With OS X Lion

    Okay well I downloaded OS X Lion a couple of days ago and I was messing about with the System Preferences (I wanted to change my wallpaper) and all of a sudden the multicolored pinwheel came up and it froze. I had to force quit it and now everytime I

  • Why do I keep recieving the error (-9808)

    I just updated my ipod touch to ios5 and I am setting it up. I do not have wifi so i tried to set it up through itunes. when I plugged it in, it sent me this error message.   (-9808)