No keyStoreManager, Portal not set up properly?

Hi all,
We've set up a CE 7.1 with EP 7.1.
Now I want to create systems (connections to ERP, PI), SSO and also JCo connections.
The problems are:
- The KeyStoreManager is not available (Systemadministration/Systemconfiguration/KeyStoreManager). The link is just missing
- Content Administration/ Web Dynpro: page/ iview is not displayed, runtime error instead. :-((
- Connection tests fail for all systems
I've done this work many times before on EP 6, never had these problems.
It looks like the portal itself has not been set up properly or many objects like iviews are missing.
I've been looking for the iView Administration.keyStoreManager for instance and it seems not to exist within our portal.
Or is my problem that all these things have changed in EP 7.1 ??
Thanks in advance!
Karsten

Hi Anaghar,
1. I found the keystore administration in the meantime
2. I have all relevant admin roles and also "Everyone", core role, eu role and so on.
3.) I have a user with same user name on the ERP system but I haven't configured SSO yet.
Might there be a reason for the failing connection test?
Thanks!
Karsten

Similar Messages

Calendar Not Setting Time Properly

Hi All,
I've been having problems recently in OS X Mavericks' Calendar app. I used to be able to set the time of an appointment by typing the time in - e.g. for the "new event" I could type 15:00 - 18:00 Watch House of Cards and the appointment would be labelled "Watch House of Cards" and the time would be from 3pm to 6pm.
Now, though, this doesn't happen. The name of the appointment would be exactly what I'd typed in (i.e. "15:00 - 18:00 Watch House of Cards") and sometimes the time for it will be one of the two times that I've typed (e.g. 15:00 or 18:00), sometimes the time will be the next default slot in the calendar (I've just tried this at 10:05 and the time for the appointment is 11:00).
This makes no sense at all. I'm certain this worked until only a few weeks ago!
Can anyone advise?
Thanks in advance!

Works for me.
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Dynamic Distribution Group on HOSTED exchange 2010 not setting up properly

Hi all,
We have a hosted exchange 2010, which prevents us from using the EMC.
I want to create a simple dynamic distribution group for every staff member in the organization but am facing a problem. I use the following command:
New-DynamicDistributionGroup -Organization "organizationname" -IncludedRecipients MailboxUsers -Name "Office"
This appears to work according to shell. In addition,
Get-DynamicDistributionGroup -Organization "organizationname"
DOES come up with "office" as a listing (though the "Managed by" field is empty. Should I care?)
However:
sending to that address creates a bounce-back "no such email address"
a look in AD shows that the object has been created somewhat incorrectly
It appears that while a group is nominatively created no email address is created attached to it (which should be [email protected]).
I am by no means a shell expert and have been bumping my head for a few days now, any suggestion would be great!
Thanks in advance,
Rodolphe

Hey, thanks for your reply Willard.
Everything looks correct:
name: Office
Alias: Office
PrimarySmtpAddress: [email protected]
EmailAddressPolicyEnabled: False
The bounceback now is quoting a permissions issue
#< #5.7.1 smtp;550 5.7.1 RESOLVER.RST.AuthRequired; authentication required> #SMTP#
This actually gives me the clues to resolve:
When creating a distribution group through the EMC, by default it is "closed" so only members of that DDL can send to it. I have tested this by sending to it from an internal address and it does go through.
Set-DynamicDistributionGroup <name> -RequireSenderAuthenticationEnabled $False
resolves the issue to allow external senders.
Thanks for your help Willard, your question was enough to get me going in the right direction. Hopefully some other newbie will find this useful in the future.

DataGrid column width is not set properly

Hi,
        In the below example I has called the OptimizeDataGrid method on Button Click event to resize the Column according to the data. First time of the button click event it called the function whereas the Datagrid Column width alone is not set properly.whereas on second time it is working properly.
For Eg : In the below statement the text value is coming as 55 and widthPadding is comes as 25. but the sum of these two value is not in the dg.columns[col].width.
dg.columns[col].width = text + widthPadding;
But the same is working on the second time of the Button click event. is any help me out to resovle this issue. Thanks in Advance.
<?xml version="1.0"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
    width="100%" height="100%" >
    <mx:Script>
        <![CDATA[
            import mx.utils.ObjectUtil;
            import mx.collections.ArrayCollection;
            import mx.core.UITextField;
            import mx.events.AdvancedDataGridEvent;
            import mx.binding.utils.BindingUtils;
            import mx.controls.Alert;
            import mx.controls.AdvancedDataGrid;
            import mx.controls.advancedDataGridClasses.*;
            import mx.controls.DataGrid;
            import mx.controls.dataGridClasses.*;
            [Bindable]
            private var dpFlat:ArrayCollection = new ArrayCollection([
              {Region:"aabbCC", Territory:"Central Californiaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa",
                  Territory_Rep:"Joe Smith", Actual:29134, Estimate:30000},
              {Region:"AAbbcc", Territory:"Nevada",
                  Territory_Rep:"Bethany Pittman", Actual:52888, Estimate:45000}
            private function optimizeDataGrid(dg:Object,widthPadding:uint = 0,heightPadding:uint = 0):void
                if ((!dg is DataGrid))
                    return;
                var col:uint;
                var colWidth:uint;
                var tf:TextFormat;
                var renderer:UITextField;
                var widths:Array = new Array(dg.columnCount);
                var height:uint = 0;
                var dgCol:Object;
                var text:uint = 0;
                if (dg.columnCount > 0 && dg.dataProvider != null)
                    for (col = 0; col < dg.columnCount; ++col)
                        widths[col] = 0;
                    for each (var item:Object in dg.dataProvider)
                        for (col = 0; col < dg.columnCount; ++col)
                            renderer = new DataGridItemRenderer();
                            dg.addChild(renderer);
                            dgCol = dg.columns[col];
                            renderer.text = dgCol.itemToLabel(item);
                            widths[col] = Math.max(renderer.measuredWidth, widths[col]);
                            height = Math.max(renderer.measuredHeight, height);
                            dg.removeChild(renderer);
                    for (col = 0; col < dg.columnCount; ++col)
                        dg.addChild(renderer);
                        renderer.text = dg.columns[col].headerText;
                        widths[col] = Math.max(renderer.measuredWidth,widths[col]);
                        dg.removeChild(renderer);
                        text = widths[col];
                        dg.columns[col].width = text + widthPadding;
                    if (height != 0)
                        dg.rowHeight = height + heightPadding;
        ]]>
    </mx:Script>
    <mx:DataGrid id="myADG"
           dataProvider="{dpFlat}" rowCount="{dpFlat.length}" sortableColumns="false">
             <mx:columns>
                <mx:DataGridColumn dataField="Region" />
                <mx:DataGridColumn dataField="Territory_Rep" headerText="Territory Rep" />
                 <mx:DataGridColumn dataField="Territory" />
                <mx:DataGridColumn dataField="Actual" />
                <mx:DataGridColumn dataField="Estimate" />
            </mx:columns>
   </mx:DataGrid>
   <mx:Button label="click" id="click" click="optimizeDataGrid(myADG,25,5);"/>
</mx:Application>
Regards
Harikumar

With horizontalScrollPolicy="off" (the default), it is hard to control
column widths because the columns are sometimes overridden to make sure they
fit on the screen.

Object reference not set error in SAP.Portal.Framework.Core.PortalWorkerReq

Hi,
I am using .Net PDK 1.0. I am often getting the error
[NullReferenceException: Object reference not set to an instance of an object.]
   SAP.Portal.Framework.Core.PortalWorkerRequest.ReadEntityBody(Byte[] buffer, Int32 size) +119
   System.Web.HttpRequest.GetEntireRawContent() +327
   System.Web.HttpRequest.GetMultipartContent() +57
   System.Web.HttpRequest.FillInFormCollection() +244
   System.Web.HttpRequest.get_Form() +50
   System.Web.UI.Page.GetCollectionBasedOnMethod() +70
   System.Web.UI.Page.DeterminePostBackMode() +128
   System.Web.UI.Page.ProcessRequestMain() +63
It is very errartic, sometimes the page gets loaded and at times I get this error. Could someone please tell me what causes this error?
Thanks
Swetha

Hi,
   This error occurred in the page where I used the file upload control. The control was working fine before. We tried installing entire PDK again and then applying the hotfix-1, but nothing worked and then I had to use an URL iview to invoke an ASP .Net application just for uploading the files.
Thanks
Swetha

TS4006 IPad not showing up in devices. Does this mean we didn't have it set up properly or just that it's not connected to wi if?

My IPad is not showing up on Find my IPhone. Does this mean we don't have it set up properly or it's not connected to Wifi? It was stolen last night. Trying to locate it

Welcome to the Apple Community.
You can only locate your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.
If the device is wiped by you or another, you may not be able to locate the device (although some have reported they can)

Access Backup Assistant contacts. The website is a loop......it behaves as if I'm not logged in. I have checked and DO have the services (provided for free with my plan). Phone is set up properly and just synched it to cloud. Cannot get to the verizon

Log in to my Verizon account. Try to access Backup Assistant contacts. The website is a loop......it behaves as if I'm not logged in. I have checked and DO have the services (provided for free with my plan). Phone is set up properly and just synched it to cloud. Cannot get to the verizon web page to Manage Contacts.

It may be a situation where we all wait for things to clear up. The Verizon Cloud has been having issues for a very long time. Have you tried backing up contacts to your Gmail account, if you have one?

TS3899 I'm trying to reply to an email on my iPhone, but I get a message "the recipient was rejected by the server" What have I not set properly?

I'm trying to reply to an email on my iPhone, but I get the message "the recipient was rejected by the server". What have I not set properly?

Go to Settings > Mail, Contacts, Calendars > Your Account > Account Name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and enter your email account and password. Make sure things are filled in properly.

WebLogic Portal not starting

Hi Folks,
I downloaded and installed weblogic 6.1 and weblogic portal 4.0. The weblogic server
starts and runs with no problems. When I try starting the portal server I get the
following error.
Does anybody know whats causing this?
<May 20, 2002 8:48:58 AM EDT> <Info> <Security> <Getting boot password from user
.>
Enter password to boot WebLogic server:
Starting WebLogic Server ....
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: try to access method weblogic/management/internal/
Helper.preloadMBeanInfos()V from class weblogic/management/Admin
at weblogic.management.Admin.initialize(Admin.java:210)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
Press any key to continue . . .

"rich" <[email protected]> wrote:
>
>
Hi Folks,
I downloaded and installed weblogic 6.1 and weblogic portal 4.0. The weblogic
server
starts and runs with no problems. When I try starting the portal server
I get the
following error.
Does anybody know whats causing this?
<May 20, 2002 8:48:58 AM EDT> <Info> <Security> <Getting boot password from
user
.>
Enter password to boot WebLogic server:
Starting WebLogic Server ....
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: try to access method weblogic/management/internal/
Helper.preloadMBeanInfos()V from class weblogic/management/Admin
at weblogic.management.Admin.initialize(Admin.java:210)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
Press any key to continue . . .After the reading the release notes I noticed other configurations that need to take
place inorder for it to run with weblogic SP2. Here is the info that got it working:
To Run Portal on WLS 6.1 SP2
The following steps are required to run WebLogic Portal 4.0 with Service Pack 1 on
WLS 6.1 with SP2:
Apply Service Pack 1, as explained in the Installation Guide.
Remove patches.jar
Change the CapacityIncrement setting
Remove patches.jar
To remove patches.jar from your installation, take the following steps:
Edit the set-environment.bat (Windows) / set-environment.sh (Solaris) to exclude
reference to patches.jar.
Delete patches.jar from bea_home/lib/ directory
Change the CapacityIncrement setting
In the P13N domain, this value is set to 0, which conflicts with WLS 6.1 SP2. Change
this setting to 1 by editing the config.xml file.
For more information on the CapacityIncrement setting in WLS 6.1, consult Configuring
WebLogic JDBC Features in Programming WebLogic JDBC.

Object reference not set to an instance of an object. at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.

Hello.
I just installed a new farm, the wizard was succesfull in all steps. However when I try to load the default site it created I got this exception.
Any idea?
System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_ApplicationProperties() at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_PartitionIDs()
at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.IsAvailable(SPServiceContext serviceContext) at Microsoft.Office.Server.WebControls.MyLinksRibbon.get_PortalAvailable() at Microsoft.Office.Server.WebControls.MyLinksRibbon.EnsureMySiteUrls()
at Microsoft.Office.Server.WebControls.MyLinksRibbon.get_PortalMySiteUrlAvailable() at Microsoft.Office.Server.WebControls.MyLinksRibbon.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at
System.Web.UI.Control.LoadRecu...
Follow me on Twitter <<<

I tried removing the user profile service application and creating it again, when I did that, and tried to navigate to the page to manager the user profile application it shows me an exception
According to the uls log viewer its;
Microsoft.Office.Server.UserProfiles.UserProfileApplicationNotAvailableException: This User Profile Application's connection is currently not available. The Application Pool or User Profile Service may not have been started. Please contact your administrator.
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ProfileAdminPage.get_CurrentApplicationProxy() at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ProfileAdminPage.IsProfileSynchronizationRunning() at Microsoft.SharePoint.Portal.WebControls.UserProfileServiceImportStatisticsWebPart.RenderSectionContents(HtmlTextWriter
writer) at Microsoft.SharePoint.Portal.WebControls.UserProfileServiceImportStatisticsWebPart.RenderWebPart(HtmlTextWriter writer) at Microsoft.SharePoint.WebPartPages.WebPart.Render(HtmlTextWriter ...
I checked and the sharepoint web services default was stopped, I started and still the same error, that pool is under Local Service account.
Follow me on Twitter <<<

Object reference not set to an instance of an object. Unable to finish the SQL 2012 installation on a VM Machine

Hi, My name is Leonard and I am studying SQL. I have downloaded the newest MS SQL 2012 and also MS 2012 Hyper-V. I have set a MS 2012 Hyper-V on a laptop with AMD Turion 64 X2 and 3G of RAM (Planing
to add more to max at 8G).
Following the instructions in the free online
Administering Microsoft SQL Server 2012 Databases” Training Kit, I have set 6 virtual machines as instructed in the Training Kit. While the installation of the MS Server Core 2008 R2 SP1 completed with no
problem, the same cannot be said for the SQL Server 2012 installation. I have encountered an error that I have not seen anyone address in any of the SQL web forums.
After running the unattended setup instruction (Setup.exe /qs /ACTION=Install /FEATURES=SQLEngine /INSTANCENAME=MSSQLSERVER
/SQLSVCACCOUNT="Njowa\Pa$$worD>" /SQLSVCPASSWORD=" Pa$$worD” /SQLSYSADMINACCOUNTS="Njowa\lenny#4!@" /AGTSVCACCOUNT="NT AUTHORITY\Network Service"
/IACCEPTSQLSERVERLICENSETERMS) this is what I get after a series SQL setup
initiation windows popups then disappears.
The following error occurred:
Object reference not set to an instance of an object.
Error result: -2147467261
Result facility Code: 0
Result error Code: 16387
Please review the summary.txt log for further details
My question is: What instance of an object is not properly initialize in the Setup instructions

Hello,
Please note that SQL Server requires at least 1 GB of RAM. The operating system (Windows Server) requires 2 GB of RAM (recommended) or 512 MB (minimum). This means any virtual machine that will receive the installation of a SQL Server instance requires 1.5
or 2 GB at least.
The behavior of SQL Server setup tells me that the virtual machine does not have enough memory assigned or .NET Framework 3.5 was not enable on Control Panel->Program
and Features before trying to install SQL Server.
The following thread is about another possible cause of this error:
http://social.msdn.microsoft.com/Forums/mr-IN/sqlsetupandupgrade/thread/575d3025-69f5-4152-a473-44496b008811
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

"Object reference not set to an instance of an object" when using Sheel Shah's example

I am attempting to use a custom add dialog as in http://blogs.msdn.com/b/lightswitch/archive/2011/07/07/creating-a-custom-add-or-edit-dialog.aspx and
I get the error "Object reference not set to an instance of an object." when clicking my button to AddEntity(). My code to call the control is:
User u = new User();
userdialoghelper.AddEntity(u);
Any ideas as to why I'm getting this error? I "think" that I've set up the class properly?
Scott

I may be a couple of years late to the party here (using VS2013) but I also had some issues adapting to Yann's improvements over Sheel's code.
Sheel's screen code as provided has the word "Old in the InitializeDataWorkspace and the created methods. this does not work when copy/pasted. ALso removed the "UI" from "InitialiseUI()"
Following code can be used with Yann's Helper Class.
Namespace LightSwitchApplication
Public Class EditableCustomersGrid
Private customersDialogHelper As ModalWindow
Private Sub EditableCustomersGrid_InitializeDataWorkspace(saveChangesTo As System.Collections.Generic.List(Of Microsoft.LightSwitch.IDataService))
customersDialogHelper = New ModalWindow(Me.Customers, "CustomerViewDialog")
End Sub
Private Sub EditableCustomersGrid_Created()
customersDialogHelper.Initialise()
End Sub
Private Sub gridAddAndEditNew_CanExecute(ByRef result As Boolean)
customersDialogHelper.CanAdd()
End Sub
Private Sub gridAddAndEditNew_Execute()
customersDialogHelper.AddEntity()
End Sub
Private Sub gridEditSelected_CanExecute(ByRef result As Boolean)
customersDialogHelper.CanView()
End Sub
Private Sub gridEditSelected_Execute()
customersDialogHelper.ViewEntity()
End Sub
Private Sub EditDialogOk_Execute()
customersDialogHelper.DialogOk()
End Sub
Private Sub EditDialogCancel_Execute()
customersDialogHelper.DialogCancel()
End Sub
End Class
End Namespace

Photoshop CS4 Brushes not Anti Aliasing properly

I've just set up CS4 and my brushes are not anti aliasing properly. There are no soft edges on any of them. I'm able to get a pressure sensitive opacity change on the stroke but the edges are all pixelated.
Here is an image (this is a soft brush. notice none of the feathering/anti aliasing is there):
http://craji.com/images/adobeproblem.jpg
I've updated the newest gpu drivers for my Nvidia 8800 GTS.
I'm running XP SP3 with dual monitors. An Apple 30" and a Cintiq 21"
I've tried placing the main photoshop window on both monitors (one at a time) to test if that was causing it and i've had no luck.
All of the options in my GPU Enabled are currently unchecked (since they were giving me lag issues on my brush stroke when they were checked).
Any help (even linking me to something similar in this forum) is greatly appreciated.
Cheers-

Definitely not file dependent. I'll open a photo in sRGB 8bit, or create a new document with any settings from cmyk/rgb/bw 8/16 etc.
I'm wondering if it has something to do with my Nvidia Display Property utility. I use it to gamma up my secondary monitor (cintiq). Although disabling that utility didn't resolve it..
I'll try uninstalling and reinstalling tonight if no one is having similar problems. Maybe that will fix it.

790FX-GD70 not setting RAM to correct timing nor voltage from SPED

My 790FX-GD70 not setting RAM to correct timing nor voltage from SPED when set to auto. The RAM I have should be 6 6 6 20 @ 1.8V but the motherboard is setting it to 9 9 9 24 @ 1.5 V
The RAM is Crucial 2GB, Ballistix 240-pin DIMM, DDR3 PC3-10600 memory BL25664BA1336 • DDR3 PC3-10600 • 6-6-6-20 • Unbuffered • NON-ECC • DDR3-1333 • 1.8V • 256Meg x 64 of which i have two of then in the two black slots.
Just to rule out the RAM I also tried a different model of RAM whose timing is 7 7 7 24 @ 1.65 which will not allow to boot to windows unless I adjust the voltage manually to 1.70 (1.65 V will still not boot properly) it sets it also at 9 9 9 24 yet this same sticks of RAM will set correctly in a MSI 770 C45 without any adjustments.
Now i will say in the case of the 790FX-GD70 I require no changes in voltage for it to boot with the 1.8 V RAM just the timings are not as they should be. The 790FX-GD70 is stable as is and I will probably leave it at the auto settings but wondered if anyone else encountered similar issues with this board

Looks like this is a bit of an issue for some other users of your RAM and not necessarily a MSI thing! This user has a ASUS board! Good luck and hope you get it sorted out.
Backround:
I bought some DDR3-1333 ram that was advertised as 6-6-6-20 @ 1.8v and, as expected, running on my board's default 1.5v it was only getting like 9-9-9-24. In fact, @ stock voltage the best I could boot up with (unknown stability) was 9-7-7. In an attempt to get the best (advertised?) performance I went ahead and manually set the timings to 6-6-6-20, left all other timings on auto, and upped the voltage to 1.8v
Boots up fine and appears to be stable. However, I do notice the RAM is fairly warm to the touch whereas @ 1.5v it was pretty benign heat-wise. I tried running 1.785v but 3 out of 4 times it would hang on the windows desktop display. So I bumped it back up to 1.8v and I'll run Memtest 86 or something else later tonight.
My question, being a noob and all...
Is running at 1.8v going to hurt something? (See my setup MB, and CPU stats)
Just to repeat, the box and manufacturer do list it as 1.8v spec. (FYI: BL25664BA1336)

System Partition Not Set. Bcdboot failed! bcdboot.exe

Hey guys,
I have an issue that I can't get past, and I've completely run out of ideas.
I have an SCCM 2012 SP1 server and it has KB2801987 applied.
From this server, I run a Windows 7 Enterprise x86, and a Windows 7 Enterprise x64 task sequence for bare metal deployment to workstations.
Everything works perfectly fine, EXCEPT when I deploy the Windows 7 Ent x64 WIM, and I've used bootable USB media.
PXE Booting a machine, and running the task sequence that deploys Win7x64 = works perfectly.
Advertising the Win7x64 task sequence to a machine = works perfectly
Booting from a 32-bit boot usb media, running the Win7x64 task sequence -> downloads the boot(x64) WinPE image, then starts deployment = works perfectly
Booting from 64-bit boot usb media, running the Win7X64 task sequence = Task Sequence Error (0x8004005).
I've recreated my USB boot media several times. I've tried different brands/models of USB keys, and I always get the exact same error.
And this is the same error that always happens in my SMSTS.LOG. It seems it can't set the boot partition, and fails at the every end of applying the WIM image. And again, this is ONLY when I use USB boot media for THIS particular task sequence.
The exact same TS, WinPE boot image and WIM image work just fine when deployed via any other method. I guess the only thing I haven't tried yet is to make a bootable CD with the same media to see if I get the same issue. I will try that as soon
as I can.
But any ideas/help is appreciated. Thanks guys.
<![LOG[Expand a string: WinPE]LOG]!><time="14:21:09.154-600" date="02-21-2013" component="TSManager" context="" type="0" thread="1084" file="executionenv.cxx:782">
<![LOG[Executing command line: OSDApplyOS.exe /image:BAC0004C,%OSDImageIndex% "/config:BAC00054,%OSDConfigFileName%" /target:0,2 /runfromnet:False]LOG]!><time="14:21:09.154-600" date="02-21-2013" component="TSManager" context="" type="1" thread="1084" file="commandline.cpp:827">
<![LOG[Command line for extension .exe is "%1" %*]LOG]!><time="14:21:09.186-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="0" thread="1160" file="commandline.cpp:228">
<![LOG[Set command line: "OSDApplyOS.exe" /image:BAC0004C,2 "/config:BAC00054,bac_unattend_soe_64.xml" /target:0,2 /runfromnet:False]LOG]!><time="14:21:09.186-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="0" thread="1160" file="commandline.cpp:731">
<![LOG[Found run from net option: 0]LOG]!><time="14:21:09.186-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="applyos.cpp:283">
<![LOG[Not a data image]LOG]!><time="14:21:09.186-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="0" thread="1160" file="applyos.cpp:433">
<![LOG[ApplyOSRetry: ]LOG]!><time="14:21:09.186-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="0" thread="1160" file="applyos.cpp:445">
<![LOG[TSLaunchMode: UFD]LOG]!><time="14:21:09.186-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="0" thread="1160" file="applyos.cpp:446">
<![LOG[OSDUseAlreadyDeployedImage: FALSE]LOG]!><time="14:21:09.201-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="0" thread="1160" file="applyos.cpp:447">
<![LOG[Adding logical drive: C:]LOG]!><time="14:21:09.201-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="diskutils.cpp:1537">
<![LOG[Adding logical drive: D:]LOG]!><time="14:21:09.201-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="diskutils.cpp:1537">
<![LOG[Skipping non-local logical drive: E:]LOG]!><time="14:21:09.201-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="diskutils.cpp:1543">
<![LOG[Skipping non-local logical drive: F:]LOG]!><time="14:21:09.201-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="diskutils.cpp:1543">
<![LOG[Skipping non-local logical drive: X:]LOG]!><time="14:21:09.201-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="diskutils.cpp:1543">
<![LOG[The volume D:\ exists and is a local hard drive.]LOG]!><time="14:21:09.201-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="installcommon.cpp:557">
<![LOG[The volume D:\ is using a valid file system.]LOG]!><time="14:21:09.279-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="installcommon.cpp:600">
<![LOG[Windows target partition is 0-2, driver letter is D:\]LOG]!><time="14:21:09.279-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="applyos.cpp:491">
<![LOG[Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL']LOG]!><time="14:21:09.279-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="util.cpp:963">
<![LOG[The machine does not have a local client cache.]LOG]!><time="14:21:09.279-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="0" thread="1160" file="installcommon.cpp:1029">
<![LOG[ResolveSource flags: 0x00000001]LOG]!><time="14:21:09.279-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="resolvesource.cpp:3265">
<![LOG[SMSTSPersistContent: . The content for package BAC0004C will be persisted]LOG]!><time="14:21:09.279-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="resolvesource.cpp:3274">
<![LOG[The package BAC0004C is found locally in the cache D:\_SMSTaskSequence\Packages\BAC0004C]LOG]!><time="14:21:09.279-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="resolvesource.cpp:3301">
<![LOG[Opening image file D:\_SMSTaskSequence\Packages\BAC0004C\Win7 (x64) - Build and Capture v1.0.wim]LOG]!><time="14:21:09.279-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="wimfile.cpp:416">
<![LOG[Image file BAC0004C version "" will be applied]LOG]!><time="14:21:09.311-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="installimage.cpp:463">
<![LOG[Starting to apply image 2 from Win7 (x64) - Build and Capture v1.0.wim to D:\]LOG]!><time="14:21:09.311-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="installimage.cpp:671">
<![LOG[Wiping D:\]LOG]!><time="14:21:09.311-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="installcommon.cpp:799">
<![LOG[Set "D:\_SMSTaskSequence" to not be wiped]LOG]!><time="14:21:09.311-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="installcommon.cpp:808">
<![LOG[Set "%OSDStateStorePath%" to not be wiped]LOG]!><time="14:21:09.311-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="installcommon.cpp:839">
<![LOG[Set "%_SMSTSClientCache%" to not be wiped]LOG]!><time="14:21:09.311-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="installcommon.cpp:839">
<![LOG[Set "%_SMSTSNewClientCachePathToCleanup%" to not be wiped]LOG]!><time="14:21:09.311-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="installcommon.cpp:839">
<![LOG[Calculating expected free space.]LOG]!><time="14:21:09.326-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="0" thread="380" file="installcommon.cpp:232">
<![LOG[Reporting deletion progress.]LOG]!><time="14:21:09.420-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="0" thread="380" file="installcommon.cpp:250">
<![LOG[Skipping D:\System Volume Information for wipe]LOG]!><time="14:21:35.627-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="ccmfile.cpp:983">
<![LOG[Skipping D:\_SMSTaskSequence for wipe]LOG]!><time="14:23:14.716-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="ccmfile.cpp:983">
<![LOG[Successfully wiped D:\]LOG]!><time="14:23:14.716-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="installcommon.cpp:918">
<![LOG[Applying image to D:\]LOG]!><time="14:23:14.716-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="installimage.cpp:710">
<![LOG[Applying image 2 to volume D:]LOG]!><time="14:23:14.716-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="wimfile.cpp:607">
<![LOG[Successfully applied image to D:\]LOG]!><time="14:30:47.797-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="installimage.cpp:730">
<![LOG[OfflineRegistry::Init("D:\Windows")]LOG]!><time="14:30:47.797-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="0" thread="1160" file="offlineregistry.cpp:168">
<![LOG[Loading offline registry hive "D:\Windows\system32\config\software" into HKLM\OfflineRegistry1]LOG]!><time="14:30:47.797-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="0" thread="1160" file="offlineregistry.cpp:60">
<![LOG[Loading offline registry hive "D:\Windows\system32\config\system" into HKLM\OfflineRegistry2]LOG]!><time="14:30:49.830-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="0" thread="1160" file="offlineregistry.cpp:60">
<![LOG[CurrentControlSet is mapped to ControlSet001]LOG]!><time="14:30:50.124-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="0" thread="1160" file="offlineregistry.cpp:215">
<![LOG[System root for target OS is D:\Windows, System drive is D:]LOG]!><time="14:30:50.139-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="installimage.cpp:919">
<![LOG[OS Version is 6.1]LOG]!><time="14:30:50.155-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="installimage.cpp:938">
<![LOG[Successfully loaded a source BCD boot system]LOG]!><time="14:30:50.171-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="bootsystem.cpp:1196">
<![LOG[SetupNewOS: Loaded source boot system from target volume "D:\"]LOG]!><time="14:30:50.171-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="installimage.cpp:1013">
<![LOG[!sBootDevicePath.empty(), HRESULT=80004005 (e:\nts_sccm_release\sms\framework\tscore\bootvolume.cpp,34)]LOG]!><time="14:30:50.873-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="0" thread="1160" file="bootvolume.cpp:34">
<![LOG[System partition not set]LOG]!><time="14:30:50.873-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="3" thread="1160" file="bootvolume.cpp:34">
<![LOG[Unable to find the partition that contains the OS boot loaders. Please ensure the hard disks have been properly partitioned
Unspecified error (Error: 80004005; Source: Windows)]LOG]!><time="14:30:50.873-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="3" thread="1160" file="bootvolume.cpp:62">
<![LOG[Command line for extension .exe is "%1" %*]LOG]!><time="14:30:50.873-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="0" thread="1160" file="commandline.cpp:228">
<![LOG[Set command line: "bcdboot.exe" D:\Windows /l en-US]LOG]!><time="14:30:50.873-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="0" thread="1160" file="commandline.cpp:731">
<![LOG[Executing command line: "bcdboot.exe" D:\Windows /l en-US]LOG]!><time="14:30:50.873-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="commandline.cpp:827">
<![LOG[Process completed with exit code 15299]LOG]!><time="14:30:50.889-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="commandline.cpp:1123">
<![LOG[uExitCode == 0, HRESULT=80004005 (e:\nts_sccm_release\sms\framework\tscore\bcdbooter.cpp,88)]LOG]!><time="14:30:50.889-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="0" thread="1160" file="bcdbooter.cpp:88">
<![LOG[Bcdboot failed! bcdboot.exe D:\Windows /l en-US failed (15299)
stdout:
Failure when attempting to copy boot files.
stderr:
]LOG]!><time="14:30:50.889-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="3" thread="1160" file="bcdbooter.cpp:88">
<![LOG[TS::Boot::BcdBooter::InstallBootFilesAndConfigBCD (sTargetSystemRoot, this->defaultLanguage, sBootVolume), HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\applyos\installimage.cpp,1065)]LOG]!><time="14:30:50.889-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="0" thread="1160" file="installimage.cpp:1065">
<![LOG[Unloading offline SOFTWARE registry hive]LOG]!><time="14:30:50.889-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="0" thread="1160" file="offlineregistry.cpp:270">
<![LOG[Unloading offline SYSTEM registry hive]LOG]!><time="14:30:52.766-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="0" thread="1160" file="offlineregistry.cpp:284">
<![LOG[SetupNewOs(&pBootSystem), HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\applyos\installimage.cpp,1543)]LOG]!><time="14:30:53.019-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="0" thread="1160" file="installimage.cpp:1543">
<![LOG[Configure(), HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\applyos\installimage.cpp,1721)]LOG]!><time="14:30:53.019-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="0" thread="1160" file="installimage.cpp:1721">
<![LOG[Installation of image 2 in package BAC0004C failed to complete..
Unspecified error (Error: 80004005; Source: Windows)]LOG]!><time="14:30:53.019-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="3" thread="1160" file="installimage.cpp:1732">
<![LOG[installer.install(), HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\applyos\installimage.cpp,1787)]LOG]!><time="14:30:53.019-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="0" thread="1160" file="installimage.cpp:1787">
<![LOG[Closing image file D:\_SMSTaskSequence\Packages\BAC0004C\Win7 (x64) - Build and Capture v1.0.wim]LOG]!><time="14:30:53.019-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="wimfile.cpp:452">
<![LOG[Entering ReleaseSource() for D:\_SMSTaskSequence\Packages\BAC0004C]LOG]!><time="14:30:53.034-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="resolvesource.cpp:3616">
<![LOG[reference count 1 for the source D:\_SMSTaskSequence\Packages\BAC0004C before releasing]LOG]!><time="14:30:53.034-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="resolvesource.cpp:3623">
<![LOG[Released the resolved source D:\_SMSTaskSequence\Packages\BAC0004C]LOG]!><time="14:30:53.034-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="1" thread="1160" file="resolvesource.cpp:3656">
<![LOG[InstallImage( g_InstallPackageID, g_ImageIndex, targetVolume, ImageType_OS, g_ConfigPackageID, g_ConfigFileName, bOEMMedia, g_RunFromNet ), HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\applyos\applyos.cpp,509)]LOG]!><time="14:30:53.034-600" date="02-21-2013" component="ApplyOperatingSystem" context="" type="0" thread="1160" file="applyos.cpp:509">
<![LOG[Process completed with exit code 2147500037]LOG]!><time="14:30:53.034-600" date="02-21-2013" component="TSManager" context="" type="1" thread="1084" file="commandline.cpp:1123">
<![LOG[!--------------------------------------------------------------------------------------------!]LOG]!><time="14:30:53.050-600" date="02-21-2013" component="TSManager" context="" type="1" thread="1084" file="instruction.cxx:3012">
<![LOG[Failed to run the action: Apply Operating System.
Unspecified error (Error: 80004005; Source: Windows)]LOG]!><time="14:30:53.050-600" date="02-21-2013" component="TSManager" context="" type="3" thread="1084" file="instruction.cxx:3103">
<![LOG[MP server http://sccm2012svr.domain.local. Ports 80,443. CRL=false.]LOG]!><time="14:30:53.050-600" date="02-21-2013" component="TSManager" context="" type="1" thread="1084" file="utils.cpp:5300">
<![LOG[Setting authenticator]LOG]!><time="14:30:53.066-600" date="02-21-2013" component="TSManager" context="" type="1" thread="1084" file="utils.cpp:5322">
<![LOG[Set authenticator in transport]LOG]!><time="14:30:53.066-600" date="02-21-2013" component="TSManager" context="" type="0" thread="1084" file="libsmsmessaging.cpp:7751">
<![LOG[Sending StatusMessage]LOG]!><time="14:30:53.151-600" date="02-21-2013" component="TSManager" context="" type="1" thread="1084" file="libsmsmessaging.cpp:4025">
<![LOG[Setting message signatures.]LOG]!><time="14:30:53.151-600" date="02-21-2013" component="TSManager" context="" type="0" thread="1084" file="libsmsmessaging.cpp:1297">
<![LOG[Setting the authenticator.]LOG]!><time="14:30:53.151-600" date="02-21-2013" component="TSManager" context="" type="0" thread="1084" file="libsmsmessaging.cpp:1327">
<![LOG[CLibSMSMessageWinHttpTransport::Send: URL: sccm2012svr.domain.local:80 CCM_POST /ccm_system/request]LOG]!><time="14:30:53.151-600" date="02-21-2013" component="TSManager" context="" type="1" thread="1084" file="libsmsmessaging.cpp:8621">
<![LOG[Request was succesful.]LOG]!><time="14:30:53.214-600" date="02-21-2013" component="TSManager" context="" type="0" thread="1084" file="libsmsmessaging.cpp:8956">
<![LOG[Set a global environment variable _SMSTSLastActionRetCode=-2147467259]LOG]!><time="14:30:53.214-600" date="02-21-2013" component="TSManager" context="" type="0" thread="1084" file="executionenv.cxx:668">
<![LOG[Set a global environment variable _SMSTSLastActionSucceeded=false]LOG]!><time="14:30:53.214-600" date="02-21-2013" component="TSManager" context="" type="0" thread="1084" file="executionenv.cxx:668">
<![LOG[Clear local default environment]LOG]!><time="14:30:53.214-600" date="02-21-2013" component="TSManager" context="" type="0" thread="1084" file="executionenv.cxx:807">
<![LOG[Let the parent group (Install Operating System) decides whether to continue execution]LOG]!><time="14:30:53.214-600" date="02-21-2013" component="TSManager" context="" type="0" thread="1084" file="instruction.cxx:3212">
<![LOG[The execution of the group (Install Operating System) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows)]LOG]!><time="14:30:53.230-600" date="02-21-2013" component="TSManager" context="" type="3" thread="1084" file="instruction.cxx:2425">
<![LOG[Failed to run the last action: Apply Operating System. Execution of task sequence failed.
Unspecified error (Error: 80004005; Source: Windows)]LOG]!><time="14:30:53.230-600" date="02-21-2013" component="TSManager" context="" type="3" thread="1084" file="engine.cxx:214">
<![LOG[MP server http://sccm2012svr.domain.local. Ports 80,443. CRL=false.]LOG]!><time="14:30:53.230-600" date="02-21-2013" component="TSManager" context="" type="1" thread="1084" file="utils.cpp:5300">
<![LOG[Setting authenticator]LOG]!><time="14:30:53.252-600" date="02-21-2013" component="TSManager" context="" type="1" thread="1084" file="utils.cpp:5322">
<![LOG[Set authenticator in transport]LOG]!><time="14:30:53.252-600" date="02-21-2013" component="TSManager" context="" type="0" thread="1084" file="libsmsmessaging.cpp:7751">
<![LOG[Sending StatusMessage]LOG]!><time="14:30:53.252-600" date="02-21-2013" component="TSManager" context="" type="1" thread="1084" file="libsmsmessaging.cpp:4025">
<![LOG[Setting message signatures.]LOG]!><time="14:30:53.268-600" date="02-21-2013" component="TSManager" context="" type="0" thread="1084" file="libsmsmessaging.cpp:1297">
<![LOG[Setting the authenticator.]LOG]!><time="14:30:53.268-600" date="02-21-2013" component="TSManager" context="" type="0" thread="1084" file="libsmsmessaging.cpp:1327">
<![LOG[CLibSMSMessageWinHttpTransport::Send: URL: sccm2012svr.domain.local:80 CCM_POST /ccm_system/request]LOG]!><time="14:30:53.268-600" date="02-21-2013" component="TSManager" context="" type="1" thread="1084" file="libsmsmessaging.cpp:8621">
<![LOG[Request was succesful.]LOG]!><time="14:30:53.315-600" date="02-21-2013" component="TSManager" context="" type="0" thread="1084" file="libsmsmessaging.cpp:8956">
<![LOG[Executing command line: X:\windows\system32\cmd.exe /k]LOG]!><time="14:31:12.004-600" date="02-21-2013" component="TSBootShell" context="" type="1" thread="784" file="bootshell.cpp:857">
<![LOG[The command completed successfully.]LOG]!><time="14:31:12.004-600" date="02-21-2013" component="TSBootShell" context="" type="1" thread="784" file="bootshell.cpp:939">
<![LOG[Successfully launched command shell.]LOG]!><time="14:31:12.004-600" date="02-21-2013" component="TSBootShell" context="" type="1" thread="784" file="bootshell.cpp:430">
http://www.dreamension.net

I am getting the exact same issue as the original post, however strangely only with one model of computer (HP Compaq 6300 Pro tower desktops).
We are using SCCM 2012 SP1 but are not using PXE, USB media only.
Same symptoms, running a deployment task sequence for x64 Windows 7 Enterprise makes it all the way through the Apply OS step which installs a .wim I've captured previously and fails when attempting to copy down the WinPE environment to continue the task
sequence.
All boot images have been updated to WinPE 4.0 and have the according driver packs added. My format and partition step creates 1 partition to use the whole drive. We do not use a separate partition for system reserved because our FDE product does not play
well with encrypting that partition because it is not an active partition.
Running the initial attempt from an x64 boot key results in failure, but running on an x86 boot key that requires the x64 boot image for deployment will complete. After the initial failure from the x64 key, the machine can't even be deployed from an x86
boot key because it still fails to write to the partition. No combination of diskpart and format from the command prompt has been able to get it deployed yet.
Any other ideas or steps to troubleshoot? I'm open to anything because this is hindering our ability to fully migrate to our 2012 environment.

No keyStoreManager, Portal not set up properly?

Similar Messages

Maybe you are looking for