No laptop audio from my DAP Jukbebox

After many years of portable use only with my fully loaded trusty DAP Jukebox 6G (worked perfectly every time) I wanted to install software/driver on a new laptop to be able to load it with new music.
I installed Creative Media Source 2.03.29 and JukeBoxDrivers.exe and upgraded firmware to 2.98 - all downloaded from Creative Achi'ves.
Jukebox is recognized in Media Source, library is available. Jukebox display shows "Host is in control"
BUT.... when I select a tune for playback there is no audio playback from laptop speakers. The play indicators move as if the tune is playing. Audio is playing in headphones connected to Jukebox, but not in headphones connected to laptop. If I insert a regular music CD in laptop I can control and playback using Media Cource.
Jukebox is only connected to laptop with USB-cable. Is this correct? Should there be audio playback through USB-cable? What can be wrong? Any advice appreciated!
Goran

You cannot playback music on the Jukebox and hear it from the PC. I think you could do this on the JB3 and later Zen models if you had a USB 2.0 connection but playing a song on the Jukebox from the PC always made it play through the JB's headphones, and I have tried it in the past with PlayCenter and MediaSource.
To work the PC would need to see the JB as if it was a hard dri've (which it doesn't) but all it is doing is sending commands to the Jukebox.
PB
Message Edited by PeeBee on 08-8-2006 02:9 PM

Similar Messages

Recording audio from laptop with T420s and combo port

Hi All,
I sometimes need to run my companys application and record the spoken messages for demo's etc. Previously, I did this simply by playing the messages through the laptop speakers and at the same time using the Windows Sound Recorder to record it from the laptop microphone (I didn't even need to use external speakers or microphone).
Now, with the new T420s that I have, when I speak into the laptop microphone it records my voice fine but when I use an application to play messages through the laptop speakers, the recorder does not pick up an sounds......is this a result of this "combo" port........if so, is there any way round it ?

I meant what if you recorded just your voice, then added the audio from your demo after the fact?
The sound chip takes the microphone input, and subtracts the speakers sound. This is what is needed most of the time, but in your case, it seems to be the exact opposite. Not sure if this can be disabled in SmartAudio.
You'll probably need Virtual Audio Cable to record multiple streams.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

NO audio from laptop speaker when phone connected to Bluetooth with media audio checked

Hey guys, when I connect my Verizon Samsung Galaxy SIII (SGS3) phone through my Toshiba Qosmio x875-Q7280 Windows 7 X64 Bluetooth with media audio checked on my SGS3; for what ever reason there is no audio playing through the speaker when I try to listen to my music and for what ever reason I notice in the recoding tab under Sound my SGS3 profile mic audio bar was moving up and down. When I went in to configure it, I click a check box which played the music that I was playing through the laptop speaker but it sounded all muffled. If anyone can help would very much appreciate it.
Solved!
Go to Solution.

Just wanted to update just incase someone else is have this same problem also, so I manage to solve this on my own my installing a bluetooth driver from Intel. I'm not sure if link posting is allow, so I'll just direct you there. If you google Intel and navigate to their download center, search for Intel® PROSet/Wireless Bluetooth Software for Windows 7* it should have two choice 32 bit and 64 bit. After it finish installing there should be another bluetooth icon in your bottom right tray. Next right click the bluetooth icon and add a new device as you would any other and enable media audio from your connected device (in this case it would be my Samsung Galaxy S 3) and you should be good to go with music or what ever sound coming out through the laptop speaker.

Headphone jack is working but no audio from laptop all drivers upto date

hi , my audio from headphone is working but there is no audio from the laptop itself, i have downloaded and updated all drivers, audio driver is conexant hd smart audio 221

Hi @SNJY ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv9730us Notebook and not playing sound. Here is a document on troubleshooting sound. Please remove the headphones for troubleshooting.
Here is another step to try.
1. Right click speaker icon (right hand corner)
2. Select Playback devices
3. Right click Speakers
4. Enable it and set as Default
5. Click Apply/Ok
A windows update KB2962407 could have caused the no sound. Open windows Control Panel, open Windows Update. Right click it and select Uninstall.
Hope this helps resolve the sound.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Fully uninstall/remove beats audio from hp pavilion x360 laptop

Hi everyone. How can I revmove the beats audio (btw. HP, I do like your products and buy them more then any other computer products, but seriously, how can you install so much trashware on a light laptop... oh well). I have seen a few guides but they all mention the IDT under device options or something similar. THERE IS NO IDT UNDER DECIVES (Under sound, video and game controlles). There is only .cyber link webcam cirtual driver, .intel(R) display audio .Realtek high definition audio There is still a Beats audio in my sys tray, in the controll pannel and it still craps up (sry for the language) my audio. I have advanced uninstaller 11 installed but it can find neither beats audio nor anything with IDT. How can I remove this from my laptop? The laptop is an HP pavilion x360 11-n013na. Cheers. EDIT: P.S I would like to remove it completely. I.E. do a clean uninstall, but if I can only disable it, that would still be better then nothing.

, Hello and thanks for posting on the HP support forums. The only way to remove the Beats audio from your system is to not use that system. Beats is built in as an integration to the IDP audio system and can not be removed. Thanks for the post and have a great day.

Itunes progress bar is not moving and music won't play. I also have no audio from my laptop at all. Any ideas? I am running windows 8.

Have had no previous problems with iTunes but for past two weeks my I tunes progress bar is not moving and music won't play.
I also have no audio from my laptop at all. Any ideas? I am running windows 8.

I'm having the same incredibly frustrating problem. I have 50-60 GBs of music and now literally ALL OF A SUDDEN most of my mp3s won't play in iTunes. Of the songs that do play, many of them sound garbled (almost as if you were listening to them underwater). As others have noted, the songs do in fact play properly in other media players (VLC, MPC, WMP, etc).
I feel like I've tried just about everything but I can't seem to fix the problem. Nor have I been able to find any viable solutions after hours of scouring the internet. Here is a list of the steps I've taken so far, in chronological order:
1. Closed/re-opened iTunes
2. Re-booted computer
3. Uninstalled/re-installed iTunes
4. Tried deleting songs from iTunes library and then re-adding them, but after dropping files into the library they don't show up at all, iTunes refuses to import them
5. Downgraded from iTunes 8 to iTunes 7
None of these things have helped at all and I am amazed that even after completely uninstalling iTunes 8 and then installing version 7 I'm still experiencing the same problem. And, on top of things, I've found that iTunes 7 is not recognizing the ID3 tags for many of the songs it does import.
My apologies for the length of this post. I just want to be specific and provide as much info as I can so that maybe we can find a solution to this thing.
So, any help would be greatly appreciated. Thanks!

Satellite L-50 can't play audio from multiple sources

I can't play audio from multiple sources. This is very annoying when I have 2 youtube videos playing, if I start playing something on the media player, there is no sound on media player, it's the same when I have 2 media players open and 1 youtube video playing, youtube video doesn't have sound..
I already have all the latest drivers, last DTS driver update was in 2014, sound update this year's february..
25/02/14
DTS Studio Sound
DTS Inc.
Windows 8.1 - 64 Bit
1.01.2700
I don't know if this makes sense, but I got newer DTS sound driver which I found, It's not my laptop model, but they all seem to be the same - v1.1.88.0
I uninstalled DTS software and still had the same problem, so it's not affecting sound driver in any way..
10/02/15
Sound Driver
Integrated Device Technology Inc.
Windows 8.1 - 64 Bit
6.10.6491.0
IDT audio driver has newer release date, but the driver version is the same as the 2013 one..
Why are toshiba releaseing old driver as 'NEW' ?
2nd is my speakers advanced settings, nothing changed when I disabled "Allow applications to take exclusive control of this device"
Attachments:
audio.png ‏6 KB
test2.png ‏7 KB
specs.png ‏16 KB

Can you check the full model and part number from the laptop?
- Peter

Satellite L50-A-19N can't play audio from multiple sources

I can't play audio from multiple sources. This is very annoying when I have 2 youtube videos playing, if I start playing something on the media player, there is no sound on media player, it's the same when I have 2 media players open and 1 youtube video playing, youtube video doesn't have sound..
It goes away when I plug out my headphones..
I already have all the latest drivers, last DTS driver update was in 2014, sound update this year's february..
25/02/14
DTS Studio Sound
DTS Inc.
Windows 8.1 - 64 Bit
1.01.2700
I don't know if this makes sense, but I got newer DTS sound driver which I found, It's not my laptop model, but they all seem to be the same - v1.1.88.0
I uninstalled DTS software and still had the same problem, so it's not affecting sound driver in any way..
10/02/15
Sound Driver
Integrated Device Technology Inc.
Windows 8.1 - 64 Bit
6.10.6491.0
IDT audio driver has newer release date, but the driver version is the same as the 2013 one..
Why are toshiba releaseing old driver as 'NEW' ?
2nd is my speakers advanced settings, nothing changed when I disabled "Allow applications to take exclusive control of this device"

I see that the option called “give exclusive mode applications priority” has been checked.
Usually different applications and programs can access the sound card simultaneously.
For example: you can hear the sound in game, while you can run your own music via an external player.
This is prevented with these options “give exclusive mode applications priority”.
Maybe you should disable (uncheck) this option to prevent the different applications for using this exclusive mode stream.
I did it for my DAC. I set the DAC for exclusive mode. Once my audio playback software starts to play music, no other software is able to share the DAC.
However, I use Win 7 and Realtek sound driver… It’s another configuration.
So it’s not known to me if your issue is related Win 8.1 system or maybe limitation of sound driver… it could be also possible that one of your sound applications don’t allow multiple sound streaming.

External HP Pavilion 23xi monitor cuts off laptop audio

I want to use my HP Pavilion 23xi monitor as an external monitor for my laptop (Sony Vaio, Windows 7). The laptop only has an HDMI connection, so I used an HDMI cable to connect it. The HP monitor works fine, but when it is connected, it cuts off all audio output on the laptop. There is no sound from the internal speaker on the laptop, or from the headphone connection.
If the HDMI connection automatically takes over the audio output, surely there should be at least a headphone socket on the PC? I can't change the connection type, as the laptop only has HDMI for an external monitor. Is there any configuration change that will fix this?
This question was solved.
View Solution.

Hi,
As you mentioned, the HDMI sound may take over sound, disable HDMI sound may help. Pleae try:
Right click the speaker icon
Select Playback devices
Right click HDMI sound and disable it
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

No audio from HDMI output because High Definition Audio Driver cannot start (Envy 17 Quad)

Ever since I first bought this laptop two months ago, the audio from the HDMI output has always been inconsistent. I remember it working a couple times, but there were more times when my audio driver didn't recognize that an HDMI cable was plugged in. Yes, I tried all the obvious: shutting down computer, checking disabled devices in Playback Devices, reinstalling drivers, etc. Now, when I plug an HDMI cable in, the video comes out fine but the IDT High Definition Audio CODEC does not recognize HDMI/my TV. The High Definition Audio Driver says it cannot start, but I could not reinstall nor find a download from HP's website. How can I get audio through HDMI to my TV??
This question was solved.
View Solution.

Hi,
Please try:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?swItem=vc-107611-1&a...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I am having trouble getting audio from a DVD.

Initially when I insert the DVD i get audio playing. Then, I pair my bluetooth headphones, they say they are connected but I get no audio from the laptop speakers or from my headphones. I disconnect the headphones and still get no audio from the laptop. I have ejected the DVD and tried to start over and still have no audio. I would like to have audio from my bluetooth headphones because this is a workout DVD. Oh, I can get audio from itunes when my headphones are connected.
Thanks in advance!

There are differences among MacBook models in that most cannot use audio over HDMI, and according to at least one answered reply here in ASC discussions, you'd need another cable or adapter for audio if you don't have a 2010 MacBook...
Here's a similar discussion with ideas, from a few years ago:
•I'm trying to hook my MacBook to my TV:
https://discussions.apple.com/message/16089168#16089168
You could check some of the similar discussion links to the right
of your posted question (this column) to see if other ideas are
offered; but this one seems to cover a general circumstance &
it may be workable if you get the correct parts.
Good luck & happy computing!

CS5.5--Issues with audio from imported avi's & issues exporting

To Start, my laptop:
CPU: Intel® Core ™ i7-2330QM CPU @ 2.00 GHz
CPU Clock Frequency: 2.00 GHz
System Memory: 8 GBytes
Cache Memory: 1 MBytes/6 Mbytes
Manufacturer: Sony Corporation
Model name: VPCF226FM
BIOS VERSION: R1190V#
OS Version: Microsoft Windows 7 Home Premium
ME Version: 7.0.10.1203
System Type: 64-bit Operating System
I downloaded the 30-day free trial of Premiere Pro CS5.5 with all updates. To play with the program, for my own personal amusement, I wanted to edit together pieces from a bunch of avi videos that I know to play properly outside the program, tested on more than one computer.
At first, importing the files seemed to be no problem, making subclips as I went along.
However, as I continued to import files, there began to be a sound issue--sometimes the sound not being present till I was 1/3 of the way through the clip, sometimes the sound seemingly playing catch up with audio that should be earlier in the video appearing later, sometimes the sound wouldn't come up at all, and still other times I'd be, for example, on video 5 when pieces of audio from video 2 would start playing over the current video.
I initially thought it may just be a memory issue, working with many large video files.
But later, when I went to edit the subclips I made, I found that many of them no longer had sound, even if they did when I initially subclipped them.
Weirdly, in the timeline, there is no consistency, as clips will appear in the video track but only some show audio tracks too. But those with audio tracks don't always play audio and those that show NO audio tracks at all actually do play audio sometimes. Also, those that show audio tracks and don't play them sometimes will show waveforms, sometimes don't. A clip with no waveform may not play 95% of the time, but then occasionally will suddenly have the waveform and play a couple times before reverting back to no audio.
A suitable solution for this personal amusement project would just be to drop a new soundtrack over the thing but, before I even got that far, I tried exporting as avi's and mpeg4's but then get error messages such as:
Premiere Pro has encountered an error.
[..\..\Src\Win\WinFile.cpp-785]
Error compiling movie.
Unknown error.
In case it was a memory issue, I tried starting a new project, only importing 2 videos, but had the same audio and exporting issues.
I'm getting really frustrated as I spent a lot of time importing/subclipping and then even more time prepping before that.
For those who are bound to ask, while new to Premiere, I'm not a novice with editing. I've used Final Cut Pro at work for many years (without such issues).
Thanks for your help.

You might start at http://www.xvid.com/
Tools to Convert to DV-AVI http://forums.adobe.com/thread/415317
Convert http://premierepro.wikia.com/wiki/FAQ:How_do_I_convert_my_files%3F
Convert SD (Standard Definition) files to DV-AVI Type II with 48KHz 16-bit Audio
As well as the links just above, use Google to find conversion software
I have NOT used the products below, I only forward due to other mentions... so YMMV and all the usual disclaimers... check the links and read to find out if one of the products listed below will rip or convert the files you have to something you need for editing
http://www.corel.com/servlet/Satellite/us/en/Product/1175714228541#tabview=tab0
http://www.womble.com/products/mvw.html
http://www.magix.com/us/movie-edit-pro/ plus $5 Ship
http://www.nchsoftware.com/prism/index.html
http://www.videoredo.com/en/index.htm
http://www.daniusoft.com/media-converter-ultimate.html
http://www.deskshare.com/media-converter.aspx Digital Media Converter
http://www.topsoftwareol.com/product/Video/Video_Converter_Standard.html
http://www.erightsoft.com/SUPER.html Multi-Converter <-- supposed to be very good
http://download.cnet.com/FreeStar-Free-Video-Converter/3000-2194_4-10854990.html
http://www.videohelp.com/tools/XviD4PSP

H7000 Bluetooth headset - No audio from microphone in Windows 8

Recently I bought a new HP H7000 Bluetooth headset. After I successfully paired it with my laptop (HP EliteBook 8470p, running Windows 8 and the Broadcom Bluetooth driver downloaded from Broadcom's site), I can hear audio from the headphones, but the microphone part doesn't seem to be functioning, it doesn't pick up a signal no matter how loud I speak.
When trying the same headset on the same laptop running Windows 7 SP1, the microphone is working perfectly.
In Windows 8, the Headset Microphone is Enabled in the Sound settings' Recording devices, and is set as Default Device. The Internal Microphone Array device (the laptop's built-in mic) is picking up audio no problem, so that part of Windows 8 is functioning properly. So there seems to be no issue with any of the settings, I went them through several times.
It's just the H7000 headset's mic under Windows 8, that is having the problem.
Anyone met this scenario, or even have a fix?

I managed to narrow it down to the Broadcom Bluetooth chipset driver in Windows 8.
Finally I ended up disabling it, and buying a USB Bluetooth micro-dongle with an Atheros chipset. With this, the headset works fine.
It is still ridiculous, to solve such a problem with additional investment, but this is not HP's fault it turned out.
I'll try to contact Broadcom's customer service, and keep an eye open for any Win8 driver updates on their support website.

No audio from headphones

I recently purchased 2 new latitude E6440 laptops with Windows 7. The speakers work well but when I plug in headphones the sound still comes from the speakers and the not the headphones. Any help on how can I fix this?

Hi chiedzacpg,
Do you have another pair of external headphones/earphones/speakers to test with? Does the said headphones work fine on another device? Could you open Dell Audio from control panel and check if the headphones are detected under the advanced tab -> jack info - see the pic
If it doesn't show up here, then open mydell -> pccheckup -> custom test -> run a custom test on the headphones/speakers. Also restart the system, press f12 -> select diags and check if the headphones have audio while in diags.
Go to support.dell.com - http://bitly.com/WBoajG - enter the service tag -> select drivers and downloads -> run the BIOS update and reinstall the audio drivers and check.
Keep us updated.
Thanks and Regards,
Rishi
Get Support on Twitter - @dellcarespro

Direct audio from different applications to different output sources

Hi all.....I'm trying to play a movie in Quicktime on an external monitor while editing in Final Cut Pro. I want the audio from Quicktime to go through my external speakers (connected to the headphone jack) while having the audio from FCP go through the internal speakers on my laptop (Macbook Pro). That way my roommates can watch movies on my laptop through the external monitor while I'm editing, and not have to listen to my FCP audio in the background. Is there any way to do this?

I don't know if they will work, but try WireTap by Ambrosia or Audio Hijack Pro by Rogue Amoeba.

No laptop audio from my DAP Jukbebox

Similar Messages

Maybe you are looking for