No LaserJet M1319f software bundle for Windows 7 (64 bit) version.

Does anyone know if HP is going to have the entire software bundle for the HP LaserJet M1319f Multifunction Printer under the Windows 7 (64 bit) version? After updating my software,firmware and drivers for my new Win7-64bit pc I realized there was no software bundle installed. The drivers installed and I can print but no other software. It looks like they have it for the Win7-32bit and I tried to install it just to see if it would work and of course in errored out incompatible. Any information would be appreciated.

Below is a link to the HP site to download the printer software for Win 7x64. You will also notice an option to download a printer firmware update that is available for this model printer.
I hope this helps..
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3547...
Dave M.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution.
I am an HP employee.

Similar Messages

Hp solutions centre software download for windows 7(64 bit) for photosmart 3110 printer?

How & where to get the hp solutions centre software download for windows 7(64 bit) for photosmart 3110 printer? The full hp solutions centre software features such as photo editing, etc that can be utilized for windows 7(64 bit) with photosmart 3110 printer

Hi Nogot7, you will have to share 3100 over your network.
On the XP computer .....
Open Printers and Faxes.
Right-click the printer you want to share, and then click Sharing.
On the Sharing tab, click Share this printer and then type a share name for the shared printer.
On the Win 7 computer ....
Go to Devices and Printers
Add a printer
Add a local printer
Select Create a new port:
Select Local Port for the Type of port:
Enter the network name of the XP computer ie. \\XPcomputername\share name
Install the 3100 driver when prompted (DO NOT use the CD but the Win 7 built in driver)
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

ITunes for Windows 7, 64-bit version not connecting to iPod

Hi, everyone! I'm having problems connecting my iPod Touch to iTunes version 11.0.1.12. I'm running Windows 7, 64-bit version on my PC. Whenever I open iTunes with my iPod Touch connected to my PC, iTunes immediately gives me the following error message:
"This iPod cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes."
This confuses me because I already have the 64-bit version for Windows 7 installed on my PC. I've already uninstalled and reinstalled the 64-bit version three times; however, I'm still getting the same error message whenever I connect my iPod Touch and open iTunes.
Any help would be greatly appreciated. Thanks!

now nothing happens when I connect the iPod by USB - it's not even charging.
Do you have a laptop, Nin?
If so, the following document might be of some assistance with that:
[iPod not recognized when connected to Windows laptop over USB|http://support.apple.com/kb/TS1401]
(That issue seems to match your recognition and charging symptoms.)

HP LaserJet P1009 printer driver for Windows 7 (64 bit)

Hi,
I'm unable to dowload a driver for my HP LaserJet P1009 printer onto my laptop (Windows 7, 64 bit). Please can you help?
Thanks,
Katy

@katymanchester
Unfortunately, there are not windows 7 drivers available for the Laserjet P1009. Please see the below document for more information on whichLaserjet products have which type of support in windows 7
Laserjet Driver and Software Support in Windows 7
Sorry
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

HP laserjet 4050 need drivers for windows 7 64 bit that works

I have a Dell Insperon 570 with windows 7 64 bit. The printer was working but now it does not. The printer is connected to a USB port. I have downloaded drivers but they do not work. Can someone help to locate a driver that works, or tell me what I am doing wrong. Thanks Doc.

Hi Arun,
For HP dv9500 drivers are availble only for Windows Vista..but most of them works fine with Windows 7 too..Here are few links and posts that might help:
HP Pavilion dv9500 Entertainment Notebook PC series
Drivers for notebook HP Pavilion dv9500 Notebook PC
Link 1
Post 1
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

Sap console for windows 7 64 bit version

Hi Everyone,
I recently got a laptop which has Windows7(64 bit) installed in it. Please can anyone tell me from where can I download SAPLOGON for the above version.
Thanks,
Shubham

Hi,
SAP GUI 7.20 supports win7 64 bits. Check Note 66971 - Supported SAP GUI platforms:
"Windows 7 64bit edition on x64 (AMD) and Intel EM64T (only "Professional", "Ultimate" and "Enterprise" editions)."
You'll be able to find the download links and more info here: http://www.sdn.sap.com/irj/sdn/sap-gui
Cheers,
Diego.

Can anyone tell me if there is a new printer software/driver for Laserjet 1300 for Windows 7 64-bit?

I recently replaced my 2 Windows XP Media Center computers. I have a new Desktop with Windows 7 Ultimate and a Laptop that has Windows 7 Professional. I have an HP Laserjet 1300 printer that I would like to connect with my desktop. This printer still works. Keeping it would save me money. Can anyone give me the link to the Laserjet 1300 software/driver for Windows 7 64-bit?
Thanks in advance!

Hi donhkraft,
I am not sure what would cause the issue you are seeing, but you can try to download the driver from HERE instead.
Let me know if you need any other assistance.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

HP Photosmart C4680 driver for Windows Vista 32-bit

I cannot find the HP Photosmart 4680 software driver for Windows Vista 32-bit. The HP website only has the driver for Windows 7 and newer. I tried to install this driver and obviously it didn't work. Can anyone help? Thanks in advance.

HI , I understand that you need the drivers for Windows Vista. I would be happy to help you.
I have provided the link for the Windows Vista drivers. HP Photosmart C4600 All-in-One Printer series Full Feature Software and Driver. If you appreciate my efforts, please click the 'Thumbs up' button below. Thank You.

C driver for Windows Vista 32-bit

I cannot find the HP Photosmart 4680 software driver for Windows Vista 32-bit. The HP website only has the driver for Windows 7 and newer. I tried to install this driver and obviously it didn't work. Can anyone help? Thanks in advance.

HI , I understand that you need the drivers for Windows Vista. I would be happy to help you.
I have provided the link for the Windows Vista drivers. HP Photosmart C4600 All-in-One Printer series Full Feature Software and Driver. If you appreciate my efforts, please click the 'Thumbs up' button below. Thank You.

Where can I download HP ToolboxFX for my Laserjet 1536dnfMFP for Windows 7 64-bit?

Where can I download HP ToolboxFX for my Laserjet 1536dnfMFP for Windows 7 64-bit?

The provided document reffer to an earlier HP ToolboxFX software.
As long as a Full Feature Software available, the HP Toolbox is included, as you may find by the following installation printscreen, taken from a Windows7 64bit Full Feature installation:
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Upgrade to I-Tunes 7.4.2 with Apple Software Update for Windows

I upgraded to I-Tunes 7.4.2 and that went great. But I was also offered an Apple Software Update for Windows which would not install. The error message said something about a part of it not being able to run. Is this a Vista thing? I still have Windows XP and don't plan to change to Vista. Will I have issues with newer versions of I-Tunes if I can't get this Software Update for Windows to install?
Thanks!

Thanks for the replies, but what I am hoping for is a solution.
Even though I asked, you never said if you have an ASU 2.0.0.21 ... so this solution runs the risk of being irrelevant to your situation. (It applies to the issue of ASU 2.0.0.21 on an XP PC returning an "invalid signature" message when trying to download an ASU 2.1.0.101.)
If that's what you've got here, then usually a software installer bundle from Apple which contains a higher version of ASU than the 2.0.0.21 will install on the PC in question.
(Avoid using the BonJour for Windows 1.0.4 standalone installer just at the moment, as a precaution. Last time I checked, about 20 minutes ago, that still contained an ASU 2.0.0.21, and that won't get you any further forward than you currently are ... assuming that you've currently got an ASU 2.0.0.21 in place.)
So download and install another Apple installer bundle. Here's a link through to the QuickTime Standalone installer, although the Safari for Windows or iTunes installer would also work:
Latest Quicktime Installers … get the one that doesn’t mention iTunes
That should, as part of the install, update your ASU to version 2.1.0.101. To check on that, launch ASU ("Start > All Programs > Apple Software Update"), go "Help > About Apple Software Update" and check the version number. If you're now at ASU 2.1.0.101, you're past the problem with ASU 2.0.0.21 returning an 'Invalid signature" message when trying to install an ASU 2.1.0.101 (assuming that's the particular problem you were actually experiencing).
You can then uninstall QuickTime for Windows (or Safari for Windows, or iTunes and QuickTime and Apple Mobile Device Support, depending on what installer you used to update your ASU version) through your Add/Remove programs control panel.

I-Tunes 7.4.2 with Apple Software Update for Windows

When I upgraded to I-Tunes 7.4.2, I was also offered an Apple Softward Update for Windows. This failed to install. The error message said something about part of it not being able to run or something. Is this a Vista thing? I still have Windows XP and don't plan to change. Will I have problems with newer versions of I-Tunes? How can I get this Apple Software Update for Windows to work - or do I have to?
Thanks!

Thanks for the replies, but what I am hoping for is a solution.
Even though I asked, you never said if you have an ASU 2.0.0.21 ... so this solution runs the risk of being irrelevant to your situation. (It applies to the issue of ASU 2.0.0.21 on an XP PC returning an "invalid signature" message when trying to download an ASU 2.1.0.101.)
If that's what you've got here, then usually a software installer bundle from Apple which contains a higher version of ASU than the 2.0.0.21 will install on the PC in question.
(Avoid using the BonJour for Windows 1.0.4 standalone installer just at the moment, as a precaution. Last time I checked, about 20 minutes ago, that still contained an ASU 2.0.0.21, and that won't get you any further forward than you currently are ... assuming that you've currently got an ASU 2.0.0.21 in place.)
So download and install another Apple installer bundle. Here's a link through to the QuickTime Standalone installer, although the Safari for Windows or iTunes installer would also work:
Latest Quicktime Installers … get the one that doesn’t mention iTunes
That should, as part of the install, update your ASU to version 2.1.0.101. To check on that, launch ASU ("Start > All Programs > Apple Software Update"), go "Help > About Apple Software Update" and check the version number. If you're now at ASU 2.1.0.101, you're past the problem with ASU 2.0.0.21 returning an 'Invalid signature" message when trying to install an ASU 2.1.0.101 (assuming that's the particular problem you were actually experiencing).
You can then uninstall QuickTime for Windows (or Safari for Windows, or iTunes and QuickTime and Apple Mobile Device Support, depending on what installer you used to update your ASU version) through your Add/Remove programs control panel.

Error in Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Hello Everyone,
I am a regular user of I-tunes but recently i dont know why but I got some error in Launching I-tunes. So as recomonded by "Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7" section. I started removing the products. But after removing Quick time, I tried to remove Apple Software Update but while uninstalling it gave error that "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." and the uninstall rollbacks.
Please send me a feasible solution to this problem.
Thank You.

Uninstalling the iCloud control panel should allow you to do that folder deletion.

Driver for HP Laserjet 1012 to work under Windows 7- 64 bit

Am trying to install a HP Laserjet 1012 to work under Windows 7- 64 bit and at HP Support, could find drivers for Vista -64-bit only.
I have tried to install this Vista - 64 bit driver and it does not seem to even print a test page.
Is there some other tweak that I need to make or
or
does it mean there will be no driver specifically usable for Win - 7 and I might as well junk the printer?
Thanks in advance.

Hi
Add Printer
Click Start then select devices and Printer the select Add Printer then select Add a local printer Use an existing port -> Next select the Printer from Manufacturer list and select the Printer from Printer list click Next and follow the Instruction.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Portal drive software for Windows 7 (64-bit)

Hi...Experts
We could not find the portal drive software for Windows 7 (64-bit) OS on service market place. The one which is available on market place is working fine for Windows 7 (32-bit ) but it does not work for 64-bit.
Can any one help us to get the 64-Bit Portal Drive
Rgds
PR

1- Set BasicAuthLevel's value to "2" by expand HKEY_LOCAL_MACHINE >> SYSTEM>>CurrentControlSet>>Services>>webClient>>Parameters
2- Restart your computer.
3- Right click "Computer" and click "Map network drive..."
To Letter Field: Set a free drive letter.
To Folder Field: Assume that your webDav address is http://abc.com:50000/irj/go/km/docs/ change it to
abc.com:50000irjgokmdocs
4- Enter your ID an Password
thats all...
Note: The mapping is as follows:
0 - Basic authentication disabled
1 - Basic authentication enabled for SSL shares only
2 or greater - Basic authentication enabled for SSL shares and for non-SSL shares

No LaserJet M1319f software bundle for Windows 7 (64 bit) version.

Similar Messages

Maybe you are looking for