No Layout type in the properties tab ????...

Hi Experts,
I am creating a AIF in the Tr SFP, when I go to the properties tab there is no layout dropdown list available and when I try to activate the form its not allowing me to activate instead a message on the status bar "Action Cancelled by user" and always in inactive mode.
Please help me out on this.
Thanks in Advance,
Praveen

Hi Experts:
I am having the same issue, where the system I am on is SAP ERP Central Component 5.0 (ECC5.0). There is no Layout Tab to define ZCI or xACF. I'm not sure if this is relevant, except that, I cannot get my Interactive form to work.
All PDF tests in SAP are passing except interactivity.
When I call my Adobe Interactive Form and set sfpdocparams-fillable = 'X' I get an error:
Error creating PDF Document -PDF Exception: Stream does not represent a PDF document.
I have applied the Usage Rights credential properly and my form displays read-only when sfpdocparams-fillable = BLANK. While in transaction SFP, I can see that my interactivity works when displaying the form through the Preview PDF tab.
Does anyone have any suggestions as to what I might do to determine why my interactivity is not working?
Thanks for your time experts,
Sean

Similar Messages

Where is the New CSS Rule button that was in the properties tab?

There used to be a plus button in the properties tab. In Dreamweaver CS6 it is gone. I loaded in a tracing image, I want to type the * tag so the image and everything else will align to the upper left coordinates 0,0.
Sean

Jon Fritz II, you Rock! That was it I can see the Plus Button, and other icons at the bottom of the old CSS Panel by hitting Control + Alt + Shift + P.
Thanks, Have a great day!
Sean

How to get rid of the properties tab popping out when I create a new shape?

Hi! I am having a bit of trouble getting rid of the properties tab that pops out everytime I create a new shape in Photoshop CC.
Are there some settings to stop this from happening? I have my space strictly organized, as most of you probably, and I need to close it each time I create new shape... so it's frustrating.
Thank you!

After you draw out a shape, then go to the Properties panel fly-out menu and uncheck Show on Shape Creation

How to change order of custom metadata fields in the properties tab

Hello all
i have added some custom properties in a folder on the km content but i can not arrange the properties in any logical order.
your help please
Thanks
Ronen

Hi Ronen,
you can
If you have defined the properties working now, you know this path: System Administration - System Configuration - KM - Configuration - CM - Global Services - Property Structures.
There you have the property structure DefaultPropertiesStructure using the property group all_groups.
all_groups consists of system, custom ... etc. in the order the tab strips come up when using details for a resource. Within each group, under group items the property or the property group to be rendered appears (in the order they get rendered). This holds recursively for all groups.
If you have defined your properties within group "custom", just arrange them in Group Items in the order you like.
Hope it helps
Detlev

When Resource Type switched, the properties lost.

I have a Resource Type (say RT_A) that tie to a Property Structure (say PS_A) that have a custom Property Group (say PG_A) with a group of custom properties. Initially, I assigned a default Resource Type also has the PG_A, then I switched it to RT_A. After I switched it, the new PS_A pop out, but the all the custom properties in PG_A become empty (they are actually just display empty, as I verified the property values still there through RF Explorer).
When I clicked "Save" on the new Property Struture, then the empty values override the old values. Now, I see all the property values become null when I checked from the RF Explorer.
My question is:
Why when I switch Resource Type (say RT_I - RT_A) of a document, the Properties in the same Property Group are not dispalyed even they are actually still exists?
Thanks for advice.
Kent

Hi Kent,
the technical reason for that is because the actual implementation makes no server round trip when you switch the resource types. The server round trip is done only when you initially open the details dialog and when you save the entries.
In my opinion the missing possibility to switch between resource types (with reload of the property values) is an important missing feature (or gap) in the KM platform and I would strongly advise to open an OSS ticket for that.
Hope this helps,
Robert

I lost the properties tab on my worksets

hi !
That's certainly nothing but I cannot edit the properties of a my worksets in my portal. The roles are ok, I can edit properties for iviews or roles but not worksets
It looks like a configuration of the display or something like that but I don't know how to get my workset properties back.
If anybody can help me, that would be cool.
Arnaud

Hi,
If some functionality is missing or reported by many users, then you can call it a bug. but this seems to be only for your user. It works for other users of the same portal. So this can't be a bug but would have happened due to some unwanted or unknown actions in portal. SAP Portal is very sensitive as far as I understood. Any wrong configuration or wrong deployment can easily bring a server down. So we have to make sure we are doing right things to the most extent. For your question, you can delete your user, recreate it and check. hope that will work.
Regards,
Harini S

Boxes cut off on the Properties Tab

Greetings,
I don't know how to describe this, but I will do my best. The
problem has nothing to do with any files I am working, but the UI
of the program. At the bottom of the ptogram is the Properties Box
that shows Format, Class, text properties and below that ID, Link
and Target.
The problem is the bottom row is cut off. I can only see the
topw 3/4 of ID, Link, and Target.
Anyone with this problem? It's hard to set a target when I
can't read what is in the box! How can I fix this?

AstronomyOnline wrote:
> The DPI adjustment did solve it, unfortunatly. I have a
visual disability so I
> need the highest DPI possible while maintaining program
functionality.
> Dreamweaver is the only program that I have used that
has a problem with the
> DPI adjustment.
I believe that this problem affects only Dreamweaver CS4.
From what I
understand, previous versions of Dreamweaver displayed
correctly with
the higher DPI. I suggest that you report this as a bug using
the
official form at
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform.
This is a
serious accessibility issue that Adobe should correct as soon
as possible.
David Powers
Adobe Community Expert, Dreamweaver
http://foundationphp.com

Maximum character limits for data types under the Definition tab in Outbound Dialer Import Rule configuration.

Hello,
We're running an outbound SIP dialer under UCCE 8.5(4). The need has come up to allow more than 10 characters for the first name field under the Definition tab in the import rule configuration section, however, it seems that 10 characters is the upper limit. The reason for wanting to do this is that we're seeing a large number of calls fail to import because the members first name is larger than 10 characters, for example, an import record with a first name of Maximillian will fail. The idea was presented to simply shorten the member name in the event it exceeds 10 characters. However, the concern is that this will cause the agent to mispronounce the members name when they are connected on the phone during initial greeting. For example, Maximillian now becomes Maximillia. Has anyone ever run into the need to do this? Is there a known workaround? Any ideas would be greatly appreciated.
Regards,
-Mike

Mike,
Are you certain that you're trying to increase the value of the correct field? When you go into your Import Rule > Definition tab > highlight the FirstName field name and click Modify... What you should see for Field length is 1-255. You can easily increase the number of character to over 10.

How do you put rules around a text box ina pages layout template? The inspector tab seems to allow rules on top, bottom or both, but not on all four sides.

How do you two format facing pages to appear as a single page for a photo spread?

It seems you have one question in the title and another in the post.
1. Select the text box. In the Inspector palettes Graphic tab choose Stroke. You can chose Line or Frame.
2. See this discussion Double Page Spread?

I can't access OPEN TYPE in the Characters tab even when I have an OPEN TYPE font.

I am trying to acess the OPEN TYPE drop down in CHARACTERS but am not able to.

Sounds like a corrupted places.sqlite file.
See http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

Adobe Interactive Form - Layout type

Friends,
I am working on an Adobe Interactive Form.
Regarding the Layout Type in the Properties Tab, what option should i choose:
Unknown Layout Type / xACF Layout / ZCI layout / Standard Layout.
I have used print forms in the past and chose Standard Layout. Please let me know what is the right choice for an interactive form.
I am trying to populate Drop Down box with values. I have chosen "Enumerated Drop-down List" from Web Dynpro Native Library.
I have done the binding under Binding tab -> Specify Item Values -> Dynamic Properties -> Binding.
Still the values are not getting displayed in the PDF preview.
Is the layout type the reason for this or do i need to work with ABAP Dynpro to rectify this error.
Points will be rewarded for helpful answers.
Thanks.

Hi,
The basic difference is:
1) ActiveX Dropdowns requires ACF to be installed on each client machine to get back the data from interactive form back to context.
2) While, the use of Native dropdowns makes a form to ZCI type, so that does not require any xACF component to be installed on each and every machine that uses the Interactive forms.
So, it is recommended to use Native dropdowns in your forms,
Also, for the population of dropdowns of type native you can go through SAP note: 1013227.
Hope this helps,
Thanks,
Amita

Can't Find the Reflections parameter in my Properties Tab

So to do some basic reflections with a standard png image in Motion 4 I need to create a floor by rotating a color solid generator on its X-axis right. Then I just select that color solid layer in the layers tab, go to the properties tab of the inspector and check the Reflections parameter. Only there is no reflections parameter in my Properties tab, only the "Casts Reflections" parameter under Blending. I'm missing the Lighting and Shadows parameters in the Properties Tab also. I must be missing something major here right? Thanks,
Jagr

-Click the 2D/3D toggle on the right side of the group layer.
or
-Select the group and go to the Inspector, Group Tab and change the type to 3D.
The Light, Shadow and Reflections options only appear when the object is part of a 3D group.

How do I make Step Types in the Type palette be "master" versions which all sequence files on a particular should use? (since this only seems to "half work")

The situation I would like is to have a library of step types which sequence developers can use. Therefore if new step types need to be added, or existing ones modified - all that needs to be done is to roll out a new MyTypes.ini (for example), and the code modules/substeps.
Scenarios:
If I create types in MyTypes.ini (make sure "Attach to this file" is checked, so they get saved here). I can then create a sequence file using these step types. No problem so far.
I can open the type palette, modify the step properties, and save. When I go back to my sequence file an asterisk appears (saying it needs to be saved, even if I have opened it from scratch). The properties have been updated to reflect what is in the Type Palette. Still no problem (Type versions are the same in the sequence file and type palette).
This is where the problem appears:
If I change a step type (in the Type Palette) from using a code module to using a Post-Step substep instead (changing the module adaptor to "None") - any instances do NOT update when you open sequence files. (The same happens vice versa also).
Please note that the "Type version" listed in the sequence file DOES match that listed in the Type Palette - the properties are the same but the manner in which the code modules are called is DIFFERENT! This then can lead to to runtime errors if the old code module has been deleted for example.
The only way around this is to open EVERY sequence file that contains an instance of the step type, and make sure that you have "Apply changes to all loaded instances of this type" checked in the step type properties dialog. This is is not a good solution since files could be missed, and is very time consuming if you have hundreds of sequence files!
What I need is that the Type Palette on any particular station contains the MASTER copies of each type. These are loaded whenever a sequence file is loaded and NOT retreived from the sequence file. As discussed above this seems to work when you modify properties - but doesnt work fine if you change the way in which code modules are called.
Am I doing something wrong or is this a limitation?

I had a system recently containing seven sequence files, approx 20 subsequences in each, and around 10-20 steps in each sub-sequence. Every step (except for the NI non-code module types) was an instance of a step type.
Each one of these steps had an Edit sub-step and a code module called through the code module adapter.
In order to make these into "wrapped up" step types it was decided to move the code module to a Post-Step substep (as also done in the NI-IVI step types) - so that developers cannot fiddle with the code prototype or module.
In order to do this I had to open all 7 of the sequence files, make the changes and then ensure that "Apply changes in this dialog to a loaded instances" was checked. This seems to sort of work, but some steps started causing Error 17502 (System Error) when you configure them (call the Edit substep). Over the course of the past few months I have had to effectively check every instance of a type to see if it works (deleting the step and replacing it when it doesnt). Other strange things happened like some of the step type instances now have the "None" (adapter) icon associated with them - but both still work.
The idea of creating a type-def of a step type is a good one, but frustrating that it doesnt seem to fully work. Why should the sequence file also store a version of the step-type - which is what is effectively causing this problem - why not make it so that if you dont have the step types installed in the type palette - TOUGH! Message Edited by RichM on 03-15-2005 06:55 AM

Properties Tab Stopped Working

Is there a way to make the properties tab start working again. After I add a component in Design View, the properties tab for that component doesn't appear. Even after I right-click on it and select Properties, the Properties tab for the component still says 'No description available'. This worked for the first few projects I created but I can't get it to work for any new projects.

I not sure if property sheet stopped working. There was a bug that caused the description part of the property sheet to occupy the whole area of the sheet when a build window opens at the bottom. Property sheet is a split pane and it is possible to resize the description are to occupy smaller space thus revealing the actual properties again.

How is the Consumption tab will update in the material master?

Hi Friends,
How is the Consumption tab will update in the material master?
what are the customization required if consumption tab wants update with respective the qty?
Regards,
Hari Shankar

Hi Friends ,
I am very thankful to u all for your quick response,
I have tested the two materials with two movement types of 601 and 954.
when i did the 601 movement type the consumption tab in the material master has updated automatically even though i haven't maintained forecasting tab, but where as for the movement type 954 the consumption tab is not updated even though i have maintained forecasting tab view in the material master.
Is the consumption view will update based on the Material movement types?
where is the control parameter for updating consumption tab?
could you pls help me regarding this?
Regards,
Hari Shankar.

No Layout type in the properties tab ????...

Similar Messages

Maybe you are looking for