No Library or Style items for menus and buttons A.En. CS4

Hi All,
I recently installed AMC CS4:PP CS4 Ver.4.0.0,PS CS4 extended Ver.11.0,
AEn Ver.4.0.0.258,AE Ver.4.0.0,ASB CS4 Ver.2.0.The install seem to have
went ok.But,when I launch Encor I see no Items in the library and style
categories.I looked in the C:Program files\adobe\adobe encor.I see no
Library Folder.I also checked the install/uninstall option in the
control panel and the Adobe PP CS4 Functional content seems to have
installed it shows 275.5 mb.System:Win XP Pro W/SP3,CPU Intel i7 2.67,
Ram 3Gig ddr3,H.D.'s OS&Programs WD Raptor 300gig 10,000 rpm,A/V 2 WD750
raid0,Export WD 750.I installed from disk.Hope I don't have to a complet
reinstall.Need Help.
Thanks,
Barry

Barry,
Do not have CS4, but would guess that it is the same. The default installation of Encore will also install the Functional Content. One can uncheck (or maybe a radio-button) in the dialog screen to NOT install, if so desired.
I'd try a Repair Install. You'll need to start up the installation, and when you get to the dialog box for chosing which programs to install, check Encore. It *should* then bring up the option to Uninstall, or do a Repair Install.
Seems to be a bit of this going around. I wonder if Adobe made a change with the installation, and set "Do Not Install Functional Content" as the default?
Good luck,
Hunt

Similar Messages

Missing all menus and buttons from Folio Builder

I had a problem with Folio Builder panel when change ID password. I re instal both plugin again( FP and FProdTool), but this did not help. After reading the forum about solving the problem >
1) Quit InDesign and any other CS apps
2) Use the Activity Monitor to quit the CS5ServiceManager or CS5.5Service Manager
3) Next delete this file based on version:
/Users/lnegi/Library/Application Support/Adobe/CS5ServiceManager/preference/csxs2.pref
/Users/lnegi/Library/Application Support/Adobe/CS5.5ServiceManager/preference/csxs2.pref
4) Then remove this item from the Keychain Access based on version:
Adobe-CS-5-renga
Adobe-CS-5.5-renga
To remove from the keychain:
Navigate to /Applications/Utilities and launch the Keychain Access.app
If the lock icon in the upper left appears locked, click on it and enter your password to unlock it.
Select the “login” item in the Keychains list in the top left.
Select “Passwords” from the category list.
Type “renga” in the search field in the top right.
Select any matches and press the delete key.
>>>>I followed the advice. But after that , Folio Builder panel has stopped working, missing all menus and buttons from FBpanel. Please help solve the problem!!!

i'm disappoint ...after the second day, I can not work with my DPS.. afte trying this:
1. Uninstall Folio Builder Panel and Folio producer Tools ( Seems you might have already followed this step). Use Spotlight to serach for Uninstall Folio builder Panel and Uninstall Folio producer Tools and then uninstall repectively.
2. Uninstall Adobe Air.
3. Restart your Machine.
4. Reinstall Adobe Air from get.adobe.com/air
5. Reinstall Folio Builder Panel and Folio Producer Tools.
>>> Folio Builder panel again does not appear!!! The Panel yesterday behaved strangely, one moment disappeared, then appeared( but with а blank window)....what am i doing wrong!? ...When I first time instal DPS, it also had problem after a older versions of DPS, but the problem eventually decided. Now I instal the last versions plugins HEEEEELPPPP!!!!

Are there any problems with motion menus and buttons in DVDSP 2 on OS 10.4?

I have not used DVD Studio Pro 2 since upgrading to Tiger but it appears to no longer be showing moving motion on menus and buttons.
Are there any problems that I should be aware of when using DVDSP2 on OS 10.4?
I have not upgrade to a newer version only because I do not have any HD software to create DVDs.
Thanks
Paul

New Discussions ReponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and he post that provided your answer with the
tag. This not only gives points to the posters, but points anyone
searching for answers to similar problems to the proper posts.
If we use the forums properly they will work well...

Tabindex is not going for checkbox and buttons in Safari 5.0.4. Any solutions?

Tabindex is not going for checkbox and buttons in Safari 5.0.4. Any solutions?

Try updating your system software.
Click your Apple menu icon top left in your screen then click Software Update.
Latest version of Snow Leopard is v10.6.8 / Safari 5.1.

Edit Items for Enum and/or Ring control yields weird dialog

Whenever I right click on an Enum or Ring control on my FP and choose Edit Items... I see the following image. It's almost like I am missing a dll or something that brings up the info for the Edit Items Page Properties Dialog Box. Any Ideas?
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~
Solved!
Go to Solution.
Attachments:
DumbEnumEdit.JPG ‏18 KB

HAHA!! That would be awesome eh?
Fact of the matter is I don't know what contributed to it. I do have a couple ideas though:
I opened a VI that was created on an older version of LabVIEW (don't know which version). The VI contained some enums and I tried editing those. I think that could have messed it up.
The other option is that I downloaded the entire OpenG library to play around with some of their VIs.
This happened shortly after one of these two incidents.
I have a huge deadline to meet next week but after that I'll give it a whirl and let you know how it goes.
Later,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Can I have separate Style Formatting for viewing and sending emails?

Hey All
I was just wondering if it was possible to have separate style settings for viewing emails sent to you and sending emails to others.
Basically I want to set up a kind of style template for all my outgoing emails but I don't necessarily want my incoming mail to be like that if you see where I am coming from.
Any help would be greatly appreciated.
Thanks
Derek

Thanks for that.
That would certainly be an option. However after some further investigation I came across this article which shows me exactly what I was looking for:
http://www.apple.com/pro/tips/mail_templates.html
But thanks for your help though. It is really appreciated.
Derek

Is there any library with new components for download and put into multisim? I need ISO124 and I don't know how to make it...

People, I am not experient on Multisim and I'd need help to make one component. First, is there any library or something for me to download components that are necessary and are not there? If there isn't, can someone help me to find ISO 124 (isolation amplifier) for simulation and PCI??
Thank You!

Leocechet,
The ISO 124 from Burr Brown (now part of TI) is one of my favorite ICs (although noisy)... I would check on the TI website and if no luck do a general google search to see if there is anything similar out there for SPICE models.
If I remember correctly the ISO124 uses a proprietary capacitive isolation barrier (mod/demod across barrier). The signal chain and performance of the ISO 124 may be difficult to mimic with a standard opamp model, but you can try as a start.
If creating my own I would use a standard opamp model and then use a voltage controlled source to model the isolation barrier (again it wouldn't be that sophisticated but you could possibly add to it).
Hopefully that will get you started. If you find a model and need help in importing it let us know.
Regards,
Pat N

CATT Test case for ME41 tcode(Multiple items for inventory and service )

Hello Gurus,
Now we are having quotation legacy file for Tcode ME41 for inventory and service items. We are using tcode <b>SCAT</b>
for CATT. Every thing going fine at recording in test case. i dont know where should i specify my legacy file path. I found there is one download option while before running test case. its not taking the file path. is there any other file path for running test case?
advice me.
regards
dinesh.a
<b></b>

Hi
I think you should use an abap program and not LSMW, because the problem is you have to create a recording for trx ME41 in the LSMW and after you can't change the abap code created.
In this way you could insert only a certain number of items by a project of LSMW, and it depends on your recording.
So if you can't know how many item should be loaded, it's very hard to use LSMW.
Max

Managing variable sized items for planning and purchase

Dear All,
We have the following situation, kindly help in resolving the same:
Some of the raw materials are variable sized (for example plates). These items come in the Semi-finished/finished BOM as Raw Materials. Now whenver the requirement for SFG/FG is there MRP creates requirement for the variable sized items as well.
We have defined the unit of measure for variable sized items as M2 (meter square). Stock for these items display total area present in the Storage Location. Since these items are cut and used it might be possible that the requirement generated by MRP can be theoretically satisfied against the available stock but cant be practically satisfied against the actual physical stock.
For example in stock we have a sheet of 4m X 5m = 20 M2. The requirement from MRP comes to be 10 M2 but with dimensions 1mX10M. The stock shows available qtty as 20M2, required qtty as 10M2 and hence No PR is generated. But in actual we need to create a PR as dimensions are different.
So to manage this we are giving MRP type of raw materials as ND (No planning). Therefore the system is not creating any PR (even if requirements exceed available stock) it only creates DepReq for the RM. Now we create manual PRs after studying the DepReq. But it seems that it is easy to loose track and difficult to know that for which DepReq the PRs are already created.
Is there any way to relate the manual PRs to the DepReq created by MRP?
If yes, then whenever DepReq will be converted to OrdRes will the above relation still be valid?
Is there any other way of resolving/mapping the above scenario?
Thanks
Vineet

We cant maintain separate material codes as the sheet required varies in size and shape. Right now I have come up with the following solution:
1. SAP: Materials which are variable sized will have MRP Type: ND (No Planning)
2. SAP: These items will be in the BOM of FG/SFG with their dimension details
3. SAP: The requirements for the Variable Sized items will be created by the MRP although no planning will be done, i.e. Dependent Requirement against sales order(through FG/SFG) will be created but no PRs/Planned Orders will be generated for these items
4. SAP: List of Requirements in the form of Dependent Requirements and Order reservations can be seen through T-Code MD04.
5. MANUAL: Manual PR is to be created against dependent requirements after checking the quantity and dimensions of the stocks available.
6. MANUAL: Maintain an excel sheet to record the materials and PR numbers created for them with quantity and dimensions. Also keep a record of sales order number from which the requirement has come. Sales order number for a requirement can be viewed through the MD04 T-Code itself. Also the dimensions required can be easily seen by navigating from MD04 to the corresponding production order component list. (Instead of Excel an SAP Table can be developed to maintain the data, the only advantage would be central maintenance of data)
7. For PRs created manually above dimensions will be manually entered in PR as "PO Text".
8. Whenver PRs are created manually the records maintained in point number 6 will have to be checked to avoid duplication of creation of PRs
9. A separate column in excel sheet (refer point 6) can be maintained for the POs created against each PR.
Dependent requirements will automatically be converted to Order Reservations in MD04 view once the Planned order of assembly is converted to a Production Order.
10. Order reservations will automatically be removed from MD04 view once the GI of variable sized material is done to Production Orders.
Do we have a better alternative to this?
Thanks
Geravine

Reassign assets without altering menus and buttons

I created a DVD that contained too much data to fit on a 4.7 disc however I didn't notice this until after my menues were perfect and each button did exactly what I wanted it to do.
Now I'm in the process of compressing my original movie so that it will fit on a 4.7 gB disc however I want to know if I will be able to easily import my new assets and get them assigned to the correct buttons and menus and such
easy being...will it be a matter of simply resetting the targets to the new assets. OR will I be better off just starting a new project. I don't want to waist my time resetting all my targets if it isn't going to work. If anyone has had experience with this...I'd love to hear about it.

Hi:
Did you encode your audio to Dolby 2.0 AC3? That will give you extra space ! (probably you did it).
You can just name your new encoded files with same name that the old ones and replace them in the same drive location (I assume the new encoded files will have exact same lenght than the originals). It's not a bad idea to keep a copy of the original files, but rename them and hide them to DVDSP. Sometimes DVDSP is very smart finding the original files . . . no matter where you copy them !
Alberto

Itunes library on external hdd for mac and pc

I want to store my my iTunes library on an external hdd and use it with a Mac and a PC. All changes made on the Mac should be recognised on the PC and all changes made on the PC should although be recognised on the Mac - one library for both.
I already tried to store my library from my PC on an external HDD and then started iTunes on the Mac, pressing "alt". But I wasn't able to open the library. When I choose library.itl, the Mac just opens iTunes without opening my iTunes library.
Any ideas, how I can put all my music, videos and podcasts on the external and then use it on Mac and PC?
Kind regards,
Matthias

The only format drive that will work with both a Mac and a PC without you using additional drivers is an older format called FAT. Disk Utility can create this. Otherwise if you use Windows' NTFS you need something like NTFS3G or MacFuse, and if you use OSX's HFS format you will need MacDrive on Windows (others may also work for both PC and Mac -- those are just the ones I could remember).
Theoretically the Mac should have been able to read the .itl on the Windows NTFS drive but maybe since it found it could not write to it, it reverted to default.
Note, if anything happens to the FAT32 drive you will need to repair it using Windows. I also assume you aren't usign this drive for huge files because FAT32 has a 4GB filesize limit.
You will have to completely erase the drive to partition and re-format it.
iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
do not confuse moving your whole folder and library with moving just media files as in
iTunes for Mac: Moving your iTunes Media folder - http://support.apple.com/kb/HT1449
Quick answer if you let iTunes manage your music: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Start iTunes with the option key held down and guide it to the new location of the library.
Macworld - How to transfer iTunes libraries between PC and Mac - http://www.macworld.com/article/46248/2005/08/shiftitunes.html

Need picture style control for photo and video wit...

Lumia 1020 stands for its excellent phone camera. But I am very disappointed with its JPG output. The whitle balance is always a big problem, then too much contrast and oversaturation. True, the photo is crystal sharp, but who needs a bad color photo with great sharpness?
After Lumia Black, the DNG format comes. Now I cannot shoot without it. So I just find the 1020 is really great, but the built-in processing destorys all.
I don't know about other phone camera, but just look at the iphone's. Thanks to its great overall JPG output quality, keep much more details, so people love to use post-fx apps in their phone to make good-looking photos. Then 1020 for me, I just have to live with the DNGs instead of easy sharing.
808 Pureview has all the picture style control funtion, even in video !! Down the contrast sharpness and saturation, then the semi-CineStyle is coming! Look at the 1020's video sample, it is a shame.
All I want to say is: Can you (I don't know to call Nokia or Microsoft) make some control opitions like 808 or just low down the over contrast/saturation/sharpness photo and video. I don't wanna see a such amazing sensor and lens camera like this terrible.

In very general terms, the requirements for Video will exceed those for Photoshop (PS). If you are looking at PrPro CS5, then the video card WILL make a difference, and PS CS5 now takes advantage of the video card, than before.
For PS, the minimum HDD setup would be a 2x system with physical (not partitions) HDD's. Video has more requirements in this area, and I would say that a 3x setup is the minimum. Do read Harm's linked article, as it is the best that I have ever run across.
For the PS setup, just locate the Scratch Disks for PS on your extra HDD's, the ones with your Project and PrPro Scratch Disks.
Enjoy the new computer, and welcome to the forum,
Hunt

How to setup FS Items for debit and credit only Financial Statement Items

Hi,
In Financial Statement, there are line items that report for the same accounts that are debit only under Assets and credit only under Liabilities. How should I setup Consolidation Chart of Accounts/FS Items in EC-CS for such items?
Regards,
B Lim

Hi Prem,
We have already assigned all the co-codes to only 1 COA.
However, we did not create any Group COA and has no intention to.
My issue is this:
As you are aware in the Financial Statement, we are able to maintain for GL accounts to be reported under Assets by specifying the DR indicator and for the same accounts to be reported under Liabilities by specifying the CR Indicator.
When I maintain the Consoliated COA in the Consolidation module (tcode CX16), I have problem with these accounts. How do I create the FS Items such that DRs goes to Assets lines and CRs goes to Liabilities?
Regards,
Bernard

Update font for all the menus and buttons

Hi,
In my application, i want to update the fonts of all the buttons and menu items, when the user selects a new form, what i am trying it , at the start of application i am putting the default font as
UIManager.put("Menu.font", Constant.bigFont);
UIManager.put("MenuItem.font", Constant.dataFont);
UIManager.put("Button.font", Constant.bigFont);
and when the user changes the font, i update the UIManager in Action event and call
SwingUtilities.updateComponentTreeUI(TestUI.this); , where TestUI is my frame, on which i add all the components,
But some how it does not work, all the fonts are not modified for all the components which are added,
How can i do it
Ashish

Hi,
In my application, i want to update the fonts of all the buttons and menu items, when the user selects a new form, what i am trying it , at the start of application i am putting the default font as
UIManager.put("Menu.font", Constant.bigFont);
UIManager.put("MenuItem.font", Constant.dataFont);
UIManager.put("Button.font", Constant.bigFont);
and when the user changes the font, i update the UIManager in Action event and call
SwingUtilities.updateComponentTreeUI(TestUI.this); , where TestUI is my frame, on which i add all the components,
But some how it does not work, all the fonts are not modified for all the components which are added,
How can i do it
Ashish

Transition old-style patching for C++ and PL/SQL compilation

Please help, have u experienced the patch installation problem?
# smpatch add -i 117837-08
add patch 117837-08
Transition old-style patching
ERROR: This patch requires patch 117846-02
which has not been applied to the system
# smpatch add -i 117846-19
add patch 117837-08
Transition old-style patching
ERROR: This patch requires patch 118682-01
which has not been applied to the system
# smpatch add -i 118682-01
add patch 118682-01
Transition old-style patching
Could anyone tell me how to install it?
Thanks a lot!
Vivian

No product name.
No version number.
Only a very sketchy description of what you are doing or why.
No help is possible.
If you need help you need to provide sufficient information for us to be able to determine what you are trying to do and what you are asking for help in doing. All is unclear.

No Library or Style items for menus and buttons A.En. CS4

Similar Messages

Maybe you are looking for