"No limit" not displaying for number of days to sync email

I recently purchased 16GB iPad w/ retina display (MD513LL) running IOS 6.0.1
I successfully set up MS Exchange email account, but it does not give me the option of "no limit" under number of days to sync.
I read in a few prior posts that deleting the email accounting and setting it up again works, but I tried that at least 6 times (it worked for my new iPhone 5, but not the iPad).

I might be wrong but I don't think so because I set up the same account on my iPhone 5 which allowed for the "no limit" option.

Similar Messages

  • Comma not displaying for number reaching to billions

    Hello All,
    I noticed that if a packed number has reached to billions, the comma doesn't get displayed.
    EXAMPLE:
    DATA: v_num1 type p decimals 2,
          v_num2 type p decimals 2,
          v_sum  type p decimals 2.
    v_num1 = '98067382712.56'.
    v_num2 = '123456789.54'.
    v_sum = v_num1 + v_num2.
    write:/5 v_sum color 4.
    When I look into the report output, it displays <b>98190,839,502.10</b> and not <b>98,190,839,502.10</b>. Is there a way to do solve this? I was hoping to find this in the user settings.
    Many thanks in advance!
    Regards,
    Kristine

    Dear Kristine  ,
    I think the problem is the field length.
    Try to define your field like
    data: v_num1 type p length 16 decimals 2.
    (16 is the max length for type p !)
    Best regards,
    Manuel

  • Interval 01 was not created for number range object HRTEM_REFN

    Dear expert!
    Now, I'm getting some issues in Training and event management module.
    - The first, I created business event
    - Second, I process to book for business event by tcode: PSV1 --> book --> book/payment info --> activity allocation.
    But when I was booking, the system displayed error: "Interval 01 was not created for number range object HRTEM_REFN"
    Help me, please!
    Best regards, Huy!

    Go to the customization as below
    Training and event mgt>Basic settings>Number range maintanence>Define number ranges for External operation
    and maintain number ranges as 01 Internal
    Hope ur problem will solve
    with regards
    partha

  • CUCM: Third Party SIP Phone "Caller ID" is not displaying for outgoing calls

    Hi Team,
    we are running CUCM 9.1(2a),
    we have integrated Third Party SIP Phone(Avaya 1230 SIP Phone) with CUCM,
    Issue: Third Party SIP Phone "Caller ID" is not displaying for outgoing calls, we are able to see only the dailed Number,
    When "A" calls to "B", "A" can see only the dailed number of "B" but not the "Caller ID"
    Regards
    Ananthakumar

    Are A and B both Avaya phones?
    So it looks like you're not seeing the alerting name/connected name getting updated then?  Do you have alerting names configured on the directory numbers?  Might need to take a look at the SIP messaging to see if the alerting name/connected name is being sent to the Avaya phones and maybe they just aren't displaying it.  Might just be something that needs to be tweaked in the 46xxsettings.txt file.

  • Invoice not displaying assignment Number

    Hi Experts,
    GL account line item display (T.Code FBL3N) for Proforma invoice not displaying assignment Number. in assignment field in production Server, but it is displaying in Quality server, can any one help me about this issue.
    Regards,
    Prakash. P

    Dear,
    Go to the transaction code "FS00" in quality and put the GL account and find the sort key in control data tab, the same sort key you assign in the current client and do one posting to check whether it is getting stamped with assignment.
    In sort key you have to pick the assignment.

  • Material Description is not displaying for few records in Report

    Dear Experts,
    Report Material Description is not displaying for few records in Bex Report but for records it is coming and even the heading of the material Description is also not coming for this report.
    Cud u plz suggest a good solution for it.
    Regards,
    Sai Phani.

    Hi Phani,
    For the text of the material in records, check if there is text maintained for that material in the master data. also try by changing the text to medium text and long text.
    regarding header, you will have same heading for key and text, you may use Materail ID / Description as the heading if you want.
    regards,
    Rk.

  • Hello Vivek here, i was trying to download apps from itunes and i could get the error message as itunes currently not available for past 2 days

    Hello Vivek here, i was trying to download apps from itunes and i could get the error message as itunes currently not available for past 2 days, is there any problem ideally or, please leave a reply
    <Email Edited By Host>

    Hi vivekanandanganesan,
    Thanks for using Apple Support Communities.  This article has some steps you can try if you are unable to connect to the iTunes Store:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Cheers,
    - Ari

  • Rate and accessable value is not displaying for the tax invoice output

    Hello All,
      Rate and accessable value is not displaying for the tax invoice output. Rest of all outputs for invoices shows Rate and accessable value.
    Scenerio is free of charge sales order (samples) removing the goods from pant so excise invoice has been created and also updated. but for tax invoice out put rate and access value is not displaying.
        Pricing procedure: In pricing procedure account keys have not been maintained because there is not gl account upadation during billing for free of charge delivery.
    Thanks & Regards,
    ramesh

    hi Gurpreet,
    You can add values to that transient column programatically,either by getiing the row from the iterator and then row.setAttribute('Column_name','Value');
    Or providing value to it in the SQL...

  • Overnight, text body of emails will not display for messages in inbox-only the from and to and a subject line displays. Draft messages in Ipad display fully. Inbox emials display fully on my main  Dell computer and my Iphone. Any ideas?  Duanekot

    Overnight, the taxt body of emails will not display for all messages in the inbox.  Only the From and To and a subject line display.  All messages in my Draft Mailbox display fully. Also, all emails in my Dell laptop and my Iphone display fully.  Any ideas?? Duanekot

    See if this helps .... Reset the iPad.
    Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears - ignore the red slider bar - let go of the buttons and let the iPad start up. Then check your emails.

  • Contact Names Not Displaying for My Conversations ...

    Hi Contact Names are Not Displaying for My Conversations in C7.
    I took C7 in April 2011.Suddenly today (July 26th 2011).Names are not displaying and also my mobile became very slow when accessing ..
    Please tell me what to do

    You are welcome. Please resolved the thread?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My phone was not worked for last two days  it happen after the instalation of new os,this is happen one of my friiends also plssssss find some solution

    my phone was  not worked for last two days  it happen after the instalation of new os,this is happen one of my friiends also plssssss find some solution

    We are all just phone users here, and no-one can hope to provide any advice with so little information to go on as to what exactly has happened.  You need to provide some detail.

  • Link Button Not Display for Tax Amount

    Hi Experts,
    I have one Problem
    I am creating A/R Invoice Document and I have assing Tax Code for Item
    It will show Tax Amount but link button or drill button not display for tax amount
    pls give me solution
    Warm Regards,
    Sandip Kokate

    HI
    How to Clear Chumb
    And I am Selecting Tax Code but still it will not show Tax Amount Link button but Tax Amount is perfectly Match
    Regards,
    Sandip kokate

  • USF on iTunes U collections such as Sustainability and iteach Initiative are not displaying new items even days after they are uploaded to the collections. The items show in the Preview of the collections but not Live view. not displaying

    USF on iTunes U collections such as Sustainability and iteach Initiative are not displaying new items even days after they are uploaded to the collections. The items show in the Preview of the collections but not Live view. not displaying

    Greetings;
    This seems to an ongoing issue (see related discussion link).  We've been experiencing the same update lag since last Friday.  The new additions to the Collection appear and are accessible in both the iPad and iPhone applications, but even though they additions appear in "Quick View", the material doesn't appear in the Collection itself.  Apple is aware of the issue and is investigating.  All the best...
    Syd Rodocker
    Tennessee State Department of Education
    https://discussions.apple.com/message/15461971#15461971

  • How do you get iTunes to not ask for a device password when syncing

    how do you get iTunes to not ask for a device password when syncing?

    Over 6000 people have downladed the script to get around this after a fashion. Is it still required?

  • Parent child relationship is not displaying for IDOC_OUTPUT_ORDERS (PO)

    Hi,
    Can somebody help me the reason why parent child relationship not displaying properly for ORDER05 basic type?
    If we go in details about the problem, a purchase order is creating in R/3 through EBP. To modify my requirement I am using userexit EXIT_SAPLEINM_002. Here I am appending the records in the segment for E1EDKT1 and E1EDKT2. IDOC is creating with an error of status record 26.
    When I check in the transaction WE19 for the respective IDOC the data is showing correctly for all the segments including e1edkt1 and e1edkt2 segments and also I check in the table EDID4 segment number is showing correctly and the for the segment E1EDKT2 PGNUM also showing correctly, but when I see the IDOC in the transactions WE02 unable to see parent child relationship between E1EDKT1 and E1EDKT2 segment. Simply the data is displaying one below other like other segment.
    I don't know the reason why it is displaying like that?
    If anybody is having the solution is highly appreciable.
    Regards,
    Noorul

    hi hassan,
    When you are appendng the REcods which belong to the purticular segment..
    all the segment needs to be appended in in the proper order as in the WE30..
    I<b> think you are appending the segment E1EDKT2 at the end of the EDIDD.. or IDOC_DATA in the user exit..</b> .. eventho no eerror will be displayed but idoc will generted with sataus 26 .. if check the <b>STATUIs Recored u ewill find the SYNTaX ERROR.</b>
    <b>Sollution for ur probelm is</b>... don append the E1EDKT2 at the lastr instead <b>you ahve to insert the segment E1EDKT2. only afer E1EDKT1..</b>..
    Tehn you r problem will be solved.. I had faced the Same proble when i worked on material maser idoc..
    <b>Close this thread if when u r problem ise solved</b>
    Reward if helpful
    Regards
    Naresh Reddy K

Maybe you are looking for

  • How to create a pdf for the URL attached to an invoice and send it as an attachment in a mail

    HI, I have requirement where i need to get the URL attached to an invoice, create the pdf and send as an attachement in a mail. The URL attached to an invoice can be seen by following the path : VF03-> Billing document->system->Services for object ->

  • Foreign Fonts in dynamic XML

    I'm working on a learning language app, so far, that teaches Thai to English speakers and English to Thai speakers. I'm pulling lesson words from an access database that is storing foreign characters just fine. Here is the xml page for the first less

  • Magic mouse

    Hello: I upgraded to 10.8.3. on 2013-03-25. I'm getting erratic behavior such as: The Magic Mouse features such as scrolling no longer work. Tapping or pressing gets the commands shown in the .png. Right click to select no longer works. Just moving t

  • RVND - Cheque Print

    Hi Gurus, I want to print the cheque by giving payee name against the expense posted. By using RVND transaction, voucher is posted but cheque is not coming out, please tell me how can i solve this issue. Thank You

  • Tnsping Test in BI 7.0

    Hi,   I recently established a DB Connect with a Oracle Database to BW. Now i want to check the Database connection from BW How can i do a TNSPING test in BW to check the connection Thanks