No Line out with KT3 ARU

Hi all,
I've got some strange problems with an MSI KT3 Ultra Aru
When I connect speakers on the "LineOut" slot, I get no sound.
But when I use a 4-speaker or 6-speaker setup, I get sound from all other outputs ... So all ports work, except the upper one (LineOut)
I reinstalled the mobo yesterday, but the sound was OK before that. I had the same problem the first time I ran the PC, and solved the problem by accident
I have tried every driver I could find ... I also checked the jumper configuratuion ti bypass the front panel and activate Line Out, still it doesn't work ...
Any clues on that ?
Update:
I formatted my HDD yesterday, tried several 4in1 and several drivers again (including those from the MSI CD) with no luck: still no sound on the line out, but everywhere else OK ...
Oh, and I'm running XP Pro

Hi,
just checked the Taiwan site and I see that MSI has released new drivers for onboard audio. They encorporate the A3.21 driver set from Avance Logic, which was reported to me to contain the fix for the DirectSound driver. I looked at the README.TXT file that came with this package, and point 5 is the thing the guy from Avance Logic told me about:
A3.21 -
1. Fix Front Mic problem.
2. Turn off "Analog input bypass to surround" when enter D1 mode.
3. Change back the default volume of Master to the middle position.
4. Add "EnableDCVoltageControl" customized option for ALC202/ALC202A.
5. Support customized DirectSound 2D/3D Acceleration (bypass kmixer).
Add "EnableDS3DLibrary" customized option to enble it.
It is turned off by default.
6. Add "PreventRegisterReset" customized option for VIA8233.
7. Only ALC201 series and ALC650 series can use "Enable 3.3V support" customized option.
For ALC202/A, it is work autometically.
8. Reset DMA when change state to Pause for ICH4 to fix HCT DiectSound failure in WinMe.
So I guess we'll need to check it out
Kind regards,
Renaatski

Similar Messages

Digital Audio In to Line Out Not working.

How do you route digital Audio in to Line out? I have a 2010 Mac Pro, running digital in and have validated it's a good signal. No sound through the line out.
In the interim, i've used Audio Hijack to route it through the line out with no issue. I'm confused as to why i must use this 3rd party product to route the audio. Any ideas, this can't possibly be a new problem.
Thanks!

I've had problems connecting my computer to my cable box as well. Comcast apparently disables some of the functions on its boxes. Call your cable company. It's most likely a problem with your box, not your computer.
Good luck and if you find the problem let me know.

No line out audio via dock connector

I have a Sendstation pocketdock:
http://www.sendstation.com/us/products/pocketdock/lineout-usb.html
I use the line out with other iPods including 4G ipod and 2G Nano with no problems.
But when I use the same Pocketdock with the iPhone, audio does not go through the line out, audio keeps coming out of the iPhone.
Is there a way to force audio out the dock/line out?

Folks,
on Nov. 29, 2007 we have begun shipping a revised PocketDock Line Out USB, which is now iPhone-enabled. We have also revised the 1/8" stereo plugs on the included cables, so they are now thin enough to fit the iPhone’s recessed headphone jack.
Note that not all retailers might have the newest stock, so if you want to be on the safe side, either ask for which revision they sell (the iPhone-option is mentioned on the packaging) or order directly from http://www.sendstation.com.
Best regards,
André Klein
+President, SendStation Systems+

Does the Universal Dock provide a true Line-Out port?

I recently bought a Universal Dock for my new black iPod. However, when I tried to connect it with an audio system or with video editing equipment, it turned out that it did not provide a true line-out signal. Instead, what came out was just the same sound as when using the headphone port. This means much less dynamics as the sound is obviously filtered and processed by an equalizer. I can raise the volume with the scroll wheel, but that is not the point. I'm sure this used to be different with my old 3rd generation iPod and a conventional dock. Even when I hook up the iPod with a Belkin Pocket Dock, I get a true and clear line-out signal with a constant volume, no matter whether the Pod's volume control is up or down. What's wrong here? Why does Apple suggest you get line-out when you can't? Is there a third party solution which supports the Apple remote control?
Thanks! Joerg.
Fifth Generation iPod Mac OS X (10.4.9) Black

I get line out with mine and the volume wheel does
not have any effect on the sound. You are connecting
to the 3.5 connector on the dock?
Yes, of course. This puzzles me. You are using a UNIVERSAL dock, not a conventional one? I mean, the one that you can operate with a remote control? As I said, I checked the problem with another universal dock at my retailer, and it showed the same problem. No full line-out, and the volume wheel DID have an effect on the sound. Should I e-mail Apple about this and ask them whether they sell different kinds of docks depending on the respective continent? And is there any Apple e-mail address for complaints/questions like this?
Thanks anyway!

KT3 ARu prob Direct soubnd digital coax

Audio prob with KT3 ARU
2 prb
I plug the S Pdif Coax outpout to my onkio Se 600
I have sound with application like winamp or Windows media player, but i dont have the system sound.
I only have them when winamp playing.
I also have prob with soundman when i choose 6 speeker. When i test the speeker, i only have the front speeker playing. The central rear and sub doesn t work.
Do some one test to plug digital audio amplifier to the coax digitial audio output ok the main board ?
Do Direct sound work ?
I have le lastes audio driver on my Windows XP

No one can help Me ????

Line Out in Software 2.0 Not Working

Shortly after upgrading to the 2.0 software on my 1st gen iPhone, I docked it in my Universal Dock, with some speakers plugged into the line out (like many times before). I didn't get the airport mode prompt, and it didn't chirp, like it always had. When I played audio, it only played through the speakerphone speakers, not through the dock. I restored the software and re-synced everything and it started working, but I've since noticed it not working on a speaker-dock, a Belkin iPod car charger with line out that I've used since I got the iPhone, and also in an iPhone dock (which I tried plugging my headphones into). It charges fine through all of the above, but the line out does not work. What could be wrong? Is anyone else experiencing the same thing? Thanks.

I'm having the exact same problem, or at least one very similar to the above one.
I have a first generation iPhone that is now on firmware 2.0.1
I did not try using the line-out on the dock before now.
When I put the iPhone into the dock (have tried both with power in from wall and from computer USB and without power as well) and connect computer speakers or headphones to the dock's line out with my iPhone in the dock I get no audio from the speakers/headphones... audio only plays through the phone's speakers.
How do I get it to switch to playing through the dock's lineout?

Satellite L670-1HJ -Internal Speakers are not muted when selecting line Out

I want to use an external set of speakers, but when plugging them in, selecting line out in Realtek HD Audio Manager doesn't turn off the internal speakers, instead only reducing their volume somewhat. Selecting Headphone does switch them off, but this results in audio being sent out at headphone levels, which sounds awful on normal speakers and is therefore not an option.
Is there a way I can either get it to switch them off when using line out too, or just disable the internal speakers altogether?

Unfortunately, in sound properties in can only deactivate either the HDMI output, or speakers, which switches both the internal and external ones on or off together, but doesn't let me choose between the two.
When selecting the headphone setting, the internal equalizer seems to switch to a different setting, which sounds very different and completely unnatural, so I'd prefer to find a way to use the much better sounding line out with disabled internal speakers.

Problems with combo KT3 ARU and GeForce 4?

Have been using GeForce 2MX with driver 30.82 w/out problems. When istalling ASUS ;( V8440, a GeForce 4 with Ti 4400 my screen goes bananas. Gets strange patterns even at BIOS startup. Hangs in WinXP. Starts in Safe-mode but still with strange patterns.
Heard rumors ?( that the problem might lie in the combo VIA and nVidia?
Have given up on the GeForce 4 unless someone can give me a hint of what might be wrong.
KT3 ARU w/2100XP/256 RAM (PC2700)/350W Pwrsupp.

Quote
What drivers are you using for the GeForce 4? Quote
Using nVidia 30.82, and yes, the mascine runs in safe mode (occationally), but with patterns. Usually grouped like this:
__ __ __ __ __ etc...
A guy at a local PC-store said something about it when I explained my problem. He had no solution and might be wrong.
Bernt

Disharging with USB, Freezing on Sync, Hard Drive noise on Line Out

I have been dealing with three issues with my 60GB iPod click wheel with color display (Photo).
The first is something that slowly creeped in, which is hard drive noise that is audible through the line out when the iPod is charging in a dock. I'd like to say it's like a ground loop issue, but it's in my car, on my iHome, and on my apple dock when plugged into power on a stereo system. It sounds like the spinning of the hard drive is correlated to the noise.
Second, over the past year or so, I've noticed that when I have the iPod plugged into any mac using USB, the iPod discharges. My friend has noticed the same problem on her 40GB 3rd generation iPod. We've tried them on several computers. Firewire connection, no problem, only USB when plugged into a computer, not the power adapter.
Just recently, the iPod froze up iTunes and the rest of my Mac (G4 MDD Dual 1gHz, OS X 10.4.10, iTunes 7.4.2) during sync. I made reformatted the iPod using Disk Utility, Restored to iPod, making sure to plug into power to finish the restore, then attempted to resync. Two attempts of this and I get the same result, a freeze.
The first two issues, I've adapted with, but this last one is just frustrating. I will attempt to sync using a firewire cable, but that should not be the solution. This iPod came with a USB cable, it should charge and sync with one. If anyone has any ideas, please let me know. Thank you!

ok I went here for instruction on how to take it apart since I wasn't having much luck on my own:
http://www.flexbeta.net/forums/index.php?act=ST&f=20&t=8269
his tip worked for me so far. hopefully this won't be just a temporary fix:
Good tip: if your iPod seems dead and the hard drive is throwing errors pull out the connection at the bottom of the ipod mainboard and plug it back in, this will hard reset your ipod and worked a few times for me

CPU whine with DVI and line out/DVI removed whine not in line out?

I have noticed that when using headphones or the line out alone I do not hear the whine noise. The whine noise is still active, in other words, I can still hear it coming from the keyboard. But, it is not transferred through the line out or headphone jack. THIS IS BEFORE I DO ANY TRICKS: mirror widget etc.
But, if I plug in the DVI adaptor and utilize the line out/headphone jack, the noise now appears. This means if I am running my laptop to do a presnetation, the noise will appear through the sound system. However, if I don't use my laptop for video and use it for audio only, the noise is not THERE!
Of course, I can use the tricks and it will eliminate it. But this leads me to believe that something is related? The DVI connection with the entire mother board....or something. Any comments? Please help

I agree. I never use line in/out of the computer for professional work. I had PCI expansion chassis doing that type of work when using the PowerBook, and am eagerly awaiting Magma's upgrades which will come soon per their emails. However, I do use my portable computer to teach and to present research, at which point lugging a full blown professional system is not an option. In some cases, it would be nice to use the line out while presenting, without having to carry additional equipment.
In any case, the problem does exist and is one that shouldn't exist. The fact that there are workarounds does not "fix" the problem or for that matter acknowledges it. Apple should acknowledge the problem and replace the faulty parts in the machines affected. I bet that if it was the other way around, say plugging something in the headphone jack would affect the screen resolution, people would be all over the place, and the solution could not possibly be, "just hook an external monitor and it will work fine".
In the meantime, I am just trying to find out if this is a widespread issue or not to see if it makes sense to return the machine, with which I am absolutely happy otherwise even with the other problems reported.

Mono audio combined with lightning line out audio issue

Hello, there! I am a single-side hearing person, so to enjoy musics mono audio is important to me. Since I use iPod touch 5 and ios 7, and connected it to a dac or amp through its lightning line out, I hear crackling sound, especially in the mids or vocals. The crackles are gone when the "mono audio" off. No problem when hearing through the 3.5 jack, w/ "mono audio" on. I do not know whether this issue was exist w/ ios 6, since I updated to ios 7 at once after I bought it. But, w/ my 4th gen touch and ios 6, there was no issue like this at all. So, is there anyone else could confirm this issue? Apple, would you please address this issue in the next u update? Thank you for any attention.

You are not addressing Apple here. We are all just users like yourself. To tell Apple go here:
Apple - iPod touch - Feedback
I would make an appointment at the Genius Bar of an Apple store and discuss it with them
Apple Retail Store - Genius Bar

Why does my scanned docs. come out with all colored lines on it after going thru the top feed try?

why does my scanned docs. come out with all colored lines on it after going thru the top feed try?

hi there,
could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Upon updating 5.1 iphone 4 blacked out with white line through screen and nonstop vibrating

i was updating lastest version my iphone 4 through icloud until screen blacked out with white line in middle of screen and started vibrating non stop.
tried a hard and soft reboot NOTHING WORKED
phone died
put back on charger
same problem screen would brown out and fade to black.
now it won't turn on.
fed up #FIX

phone lost full charge upon charging again now i have colored lines running horizontal through screen then vertical.
hard restart does nothing again.
but its no longer vibrating.
seems like serious software issue.

Need a car charger with line out for 3g

Hi,
My Belkin charger works great with the v1 iphone, however, it won't charge the 3g. It appears that the Belkin is using the "firewire" pin for charging which isn't supported by the 3g.
I need somebody to recommend a car charger that will charge the 3g and has a "line out" connection for my car's aux input port.
Thanks
Donald

There's the Griffin TuneFlex and the Kensington LiquidAUX.
http://www.griffintechnology.com/products/tuneflex-aux-with-smartclick
http://us.kensington.com/html/14493.html
Message was edited by: eaglesflight1258

Sound problems with back line out port

Hey everyone, I just sent an email to MSI Tech Support, but figure I would post a message here as well. I just put together a new system, but I'm having a problem with the back line out port.
My problem: When I plug in the front panel audio connectors (Left Audio Out, Left Audio Return, Right Audio Out, Right Audio Return) in the motherboard on pins 5-6 and 9-10 of JAUD1, the back line out does not work properly. I get sound on only the right speaker of the headphones.
More info:
- Audio Driver: 5.10.0.5620 (from MSI CD)
- If I instead plug the headphones on the front audio line out, then sound is fine
- Here's the strange part, if I unplug the front audio connectors from the motherboard (and short pins 5-6, 9-10 with the jumpers, obviously), then the sound on the back line out works properly!
- My Windows sound settings are fine
Has anyone heard of this problem? Any ideas/suggestions of what I could try?
Could this be a defective board? Could it be bad wires on the case? Seems unlikely since both back line out and front line out work depending on what I have setup.
Help! :-)
Thanks,
icab

Quote
Originally posted by Steve F.
You could try:
1. Read the manual
2. Search this forum.
Rear sound problem
Third time this has come up in 1 or 2 weeks.
Steve,
I appreciate the reply, but I believe you are wrong. Yes, I have searched the forum and did find that thread. Yes, I have read the manual. The only thing that it says is: "If you don't want to connect to the front audio header, pins 5 & 6, 9 & 10 have to be jumpered in order to have signal output directed to the rear audio ports. Otherwise, The Line-out connector on the back panel will not function." That's not my case since I want both ports to work (not outputting the signal both at the same time, obviously).
This can't be ByDesign. Either my board is defective or MSI is not following the Intel Front Panel I/O Connectivity Guide correctly. The whole point of having 4 wires for the front panel audio ports, 2 of the wires being Aud_Ret_R and Aud_Ret_L, is so that the audio signal is sent to the front line out and _returned_ to the back line out if nothing is plugged in the front line out.
I have an IBM machine with an intel mobo at work and it works as mentioned in the design guide.
Any other ideas, anyone? I can still RMA my motherboard, but it's a design issue, i guess I'm stuck. I never got an automated reply from MSI Tech Support, so I guess my email never went through. I'll send another email and let the forum know of the results.
Thanks,
Igor

No Line out with KT3 ARU

Similar Messages

Maybe you are looking for