- No link between IOM port 3/2/2 and fabric interconnect B:1/18

Specifically I'm trying to find out what the 3/2/2 means in - No link between IOM port 3/2/2 and fabric interconnect B:1/18

This from the fault reference guide:
"No link between IOM port [chassisId]/[slotId]/[portId] and fabric interconnect [switchId]:[peerSlotId]/[peerPortId]"
http://www.cisco.com/en/US/docs/unified_computing/ucs/ts/faults/reference/UCS_SEMs.html#wp1306388

Similar Messages

No link between IOM port 2/2/3 and fabric interconnect B

Hello
I am trying to remove an uplink from an IOM to the fabric interconnect as its not required. I have tried to reset the I/O module and re-acknowledge the chassis with no luck, it is still shown in the GUI with the error message as in the subject. We are currently running 2.0(1s). The kit isn't in production yet.
Thanks for any help

Yes i agress thats a pretty heavy approach to clean it. No if you left it there as it is, there would have been no operational issues. It would have just left this fault in the UCSM.
./Abhinav

Monitoring traffic between UCS fabric extenders and fabric interconnect?

What is the best way to monitor the traffic between UCS fabric extenders (chassis) and fabric interconnect? Specifically I am looking for parameters to keep an eye on to determine when we may need to move from 2 links per fabric extender to 4 to handle greater IO needs.
Thanks.
- Klaus

One way you could monitor usage is by looking at the interface stats just as you would for any switch uplink.
Connect to the Cluster CLI
connect NXOS
Look at the input/output rate of your Server Uplink interfaces.
In my example I'm using fixed ports 1 through 4 on my FI's connecting to the IOM of the Chassis.
UCS-A(nxos)# show int eth1/1-4 | include rate
30 seconds input rate 17114328 bits/sec, 1089 packets/sec
30 seconds output rate 8777736 bits/sec, 693 packets/sec
    input rate 5.07 Mbps, 198 pps; output rate 1.03 Mbps, 99 pps
30 seconds input rate 2376 bits/sec, 0 packets/sec
30 seconds output rate 1584 bits/sec, 2 packets/sec
    input rate 1.58 Kbps, 0 pps; output rate 1.58 Kbps, 3 pps
30 seconds input rate 2376 bits/sec, 0 packets/sec
30 seconds output rate 31680 bits/sec, 20 packets/sec
    input rate 1.58 Kbps, 0 pps; output rate 30.89 Kbps, 18 pps
30 seconds input rate 2376 bits/sec, 0 packets/sec
30 seconds output rate 1584 bits/sec, 1 packets/sec
    input rate 1.58 Kbps, 0 pps; output rate 1.58 Kbps, 3 pps
If you notice your two links pushing near 10G consistently, it might be time to add another 2 link.
Other than this you can use SNMP to log the stats and look based on daily/weekly/monthly usage.
Robert

Link between delivery schedules in purchase order and GR document

Dear all,
Can you provide link between Delivery schedules in po and gr document. for which schedule gr is done etc.
With Regards,
prasadbabu

i want fields mblnr and eindt in one table.
With Regards,
PrasadBabu.

Link between vendor number in purchase order and supplying plant (Sales O.)

Hi All
Please could you advise, what settings control the following:
1. Purchase order created for vendor A. (vendor- is internal supplier within same company in SAP, but different company code).
2. Sales order automatically created on vendors side, plant B.
Question is where is the link between vendor number (A) and supplying plant name (B):
How SAP identifies, what plant sales order (for created purchase order) should be generated at?
Thanks!
Regards, Andrey

Hi,
Click the below link for more infromation about SD & MM integration.
http://sap-img.com/sap-sd/link-between-sap-sd-mm-and-fi.htm
regards,
Venkatesan Anandan

Link between User Name in user table and Personla number in HR

Hi
Could any one let me know the link between the User Name field in User table and Personal number in HR table. Pls let me know the table name which shows the relation between these two fields.
Regards,
Ram

HI Ram
The table which contains this data is PA0105. The value of field USRTY should be '0001'. For example if u want to get the UNAME related to an employee.
SELECT usrid
FROM pa0105
WHERE pernr EQ p_pernr
AND usrty EQ '0001'.
Please award points if u found this helpful

How to find link between the field (kzbew) mvt.ind. and the (ebeln) ?

Hi all,
while finding the link between the kzbew and the ebeln the only table i found is MSEG.
But i want to populate the data in this table only?
So please give me the solution how i can fetch the movement indicator for a particular purchase order?
As i am using the idoc segment MBGMCR02((for creating goods receipt)...i have to pass the movt. indicator with the movement type also.......?

the field - description in MSEG says:
Movement Indicator
Specifies the type of document (such as purchase order or delivery note) that constitutes the basis for the Movement.
Use
This indicator is necessary, for example, to enable a distinction to be made between a goods receipt for a purchase order and a goods receipt for a production order. These two goods movements result in different data
and account updates in the system.
Dependencies
The movement indicator is derived from the transaction code.
what transaction do you want to use for your idoc?

Port-channel L2 problem with Fabric Interconnect and Nexus 7010

Hi,
i using port-channel from both fabric interconnect to N7k with 3 cables per Fabric Interconnect.
but, my problem is when i creating port-channel, Fabric Interconnect don't support mode ON dan rate-mode share in Interface 10G Nexus 7010.
I was trying :
1. I using non dedicated port in Nexus 7010.
      - rate-mode share
      - channel-group 1 mode active
      - switchport mode trunk
when i using this option, the port-channel in Nexus 7010 was suspended
2. I using non dedicated port in Nexus 7010
     - rate-mode share
     - channel group 1 mode on
     - switchport mode trunk
when i using this option, the port-channel in Nexus 7010 was came up, but in Fabric interconnect was failed.
3. I using dedicated port in Nexus 7010
     - rate-mode share
     - channel group 1 mode active
     - switchport mode trunk
when i using this option, the port-channel in Nexus 7010 was suspended
4. I using dedicated port in Nexus 7010
     - rate-mode dedicated
     - channel group 1 mode active
     - switchport mode trunk
when i using this option, the port-channel in Nexus 7010 was came up and running well.
but, the problem is my costumer do not want using a dedicated rate-mode. if i using dedicated mode the only available port is 8 interfaces instead of 32 ports. i want to using rate-mode share in nexus 7010.
is there any way to configuring port-channel using mode on in fabric interconnect ? i was trying using CLI to create port-channel in Fabric interconect but i cannot configure the channel group protocol.
i attach the topology of N7K with Fabric interconnect.
regards,
Berwin H

Hi Manish,
the issue was solved, i was fix it last week.
the solution is:
i enable the license grace-priode (since my license is Enterprise so cannot create VDC) then i create a VDC (ex: VDC 2) so i allocate the interface on all module
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
N7K-M132XP-12 to VDC 2. after that i delete VDC 2 then all interface back to VDC 1 (default vdc). then i enable the rate-mode share in dedicated port and bundle into port-channel and its working.
i dont know why it must move to VDC first then it will working, maybe cisco can explain the reasons.
So here the result of my port-channel :
SVRN7KFARM-HO-01# show port-channel summary
Flags: D - Down        P - Up in port-channel (members)
        I - Individual H - Hot-standby (LACP only)
        s - Suspended   r - Module-removed
        S - Switched    R - Routed
        U - Up (port-channel)
Group Port-       Type     Protocol Member Ports
      Channel
1     Po1(SU)     Eth      LACP      Eth1/1(P)    Eth1/2(P)    Eth1/3(P)
                                     Eth1/4(P)    Eth1/25(P)
2     Po2(SU)     Eth      LACP      Eth1/9(P)    Eth1/10(P)   Eth1/11(P)
                                     Eth1/12(P)   Eth1/26(P)
3     Po3(SU)     Eth      LACP      Eth1/17(P)   Eth1/18(P)
4     Po4(SU)     Eth      NONE      Eth10/32(P) Eth10/34(P) Eth10/35(P)
                                     Eth10/36(P)
Thanks.
Berwin H

Link between Service Order / Confirmation in CRM and Purchase Order in ECC

Hi all,
Does anyone knows what the possible link is between a Service Order / Service Order Confirmation in CRM and a Purchase Order in ECC ? I heard that this could be found somewhere in the document flow of a Service Order ....
How do we get the Purchase Order number from ECC in the Document flow section of an Service Order in CRM ?
We need the PO number somehow to be able to create a Goods Received document in ECC from CRM.
BR,
Abjuh

Hello Abjuh,
As of CRM 4.0 (with Service Industry extensions), you can automatically create ECC Purchase Orders from a CRM service order.
It is possible to track the status of the individual service order items with the document flow.
Please refer to the SAP Help for more information.
http://help.sap.com/saphelp_crm70/helpdata/EN/46/8bae7e9e886160e10000000a1553f7/frameset.htm
Kind regards,
Kristoff.

SolMan - link between Business scenario/process in solar02 and CR/CD

Hello Solman experts,
I would like to know more about the possibility to link BP structure in solar02 with Charm (CR/CD you create).
I know we can create a standard incident directly from the BP structure of solar02 or we can add a link to a standard incident message in the tab "incident/messages,
but we only use a customed version of charm (CR/CD... no incident) and we would need to
- either create CR from the business process structure in solar02
- or to create it as usual via our Z transaction Z_charm_create and then to add a link in solar02 in a tab to the CR/CD created in charm.
We indeed need to have a link for reporting purpose between our BP structure and the change document/change requests/TR.
Could you help me?
Thanks in advance,
Alice

hi
i hope you are missing something
To assign structure elements from a project, choose the Project pushbutton and select the required project.
The system creates the root node Projects and also the subnode Structure Objects automatically.
To assign structure elements from a solution, choose the Solution pushbutton and select the required solution.
The system creates the root node Solution. Click the Solution node with the secondary mouse button and
choose Add and then Structure Objects. The system creates the subnode Structure Objects
pls again chk this
[https://cw.sdn.sap.com/cw/docs/DOC-30423?treeid=DOC-8303|https://cw.sdn.sap.com/cw/docs/DOC-30423?treeid=DOC-8303]
But if this case only sp22 above, try with frederico's advise.
jansi

View link between view based on entity(table) and view based on stored proc

I've created a view based on a stored procedure. I need to link this view to a view based on an entity which is based on a table.
I can create the view without issue, but when I attempt to run the application module that contains the relationship I get this error:
(oracle.jbo.InvalidOperException) JBO-26016: Cannot set user query to view "SalesentityModuleApiView2" because it is a destination in a view link
One thing that may be notable about this is that this view started out based on a database view. I later overrode the select related methods using the example here:
http://download-east.oracle.com/docs/html/B25947_01/bcadvvo008.htm
Any ideas? I will gladly post some code if someone will let me know what might help diagnose this.

Hi,
I solved my problem with adding transient field, and changing the value of it (true | false) on set method of field that can be changed so I can get which row was updated. What exactly do you mean when you say not updateable, I'm using a vo with no entity, and I can add, remove rows, in fact I think it's a good solution because I don't want to write to database immediately.

Link between WebSphere Default Messaging provider/SIBus and JCAPS JMS

Our goal is to put messages using JMS from an application running in a WebSphere Application Server, to a JCAPS JMS message server, stcms.
Our developers are suggesting the application to connect directly to the receiving JMS-server.
However, as an administrator, I want the infrastructure to handle failover and routing of the messages to the receiving message servers.
One alternative is to make use of the integrated SIBus in WAS and make a link to the foreign JMS-server.
Anyone tried this and made it working?
Jonas

hi jonas,
we have tried this out with WAS(5) but never suceeded. since configuration is a bit complicated we have only spent 2 days trying it. maybe you have better knowledge as we do and the product as such has changed in lots of details .... if you manage to do so please inform this newsgroup about it.
i would love to see a solution to this.
regards chris

Port-channel Problem between Fabric Interconnect and N7K vPC

Dear all,
I have a problem with Port-channel Uplink between Fabric Interconnect with N7K using vPC
This is my network topology for UCS Deployment
In N7K I has configured vPC for red link and green link, at Fabric Interconnect A I has configured Port-Channel with member is Port 1 and Port 2, uplink is red link. At Fabric Interconnect B, I has configured Port-Channel with member is Port 1 and Port 2, uplink is green link.
The show interface port-channel on N7K is good, every port-channel is up and have all member. But At Fabric Interconnnect, when I see on UCS Manager, the status of Port-Channel on Fabic A and Fabric B is fault with Additional Info: No operational member. Although all link is link up and I has status of Port-Channel is enable on UCS Manager. When I see the Properties of Port 1, Port 2 on Port-channel, I see the membership status is : individual. This mean port-channel is not up and no membership in this configuration. I want to using port-channel for load balance and plus more bandwidth for uplink to 20Gig. I don't understand why ?
Please help me resolve this problem, I has send the capture screen of UCS Manager when I show status of Port-channel and Port-member in port-channel in attach items.
Anyone can help me to resolve this, thanks you very much. Please reference attach items for more detail about fault.
Thanks,
Trung.

Thanks Matthew very much,
I has resolved this problem. The reason of problem is miss match protocol of port-channel between N7K and Fabric Interconnect. The Fabric Interconnect always use LACP protocol, but N7K using Port-channel mode on, that why the port-channel failed. I has configured LACP for port-channel in N7K, it has resolved the problems.
Thanks,
Trung.

Link between Invoice and Payments

As I understand the link between the A/R Invoice table and the Incoming Payment table is OINV.ReceiptNum = ORCT.DocEntry. My question is when does the ReceiptNum field get filled in? We have many closed Invoices that have a payment linked (viewed by going to Applied Transactions when on the Invoice) but the ReceiptNum field is still NULL in the database. Shouldn't these invoices all have a linked payment if they are closed?
Regards,
Jeremy

Hi Steven,
The reciptnum field is populated when the payment is created and the Invoice is a part of that payment. If you do a manual reconciliation this field is not populated.
Open the payments that you see in Applied transactions to see if the Invoices are in the rows.
Hope it helps,
Jesper

Link between

i want link between schedule wise po qtys tables and lot number
tables for example link between like tables eket and qals.
common fields r there but i want links regarding deliveries, schedules.
so plz give me tables related to above discussion.
chaitanya.

i want link between schedule wise po qtys tables and lot number
tables for example link between like tables eket and qals.
common fields r there but i want links regarding deliveries, schedules.
so plz give me tables related to above discussion.
chaitanya.

- No link between IOM port 3/2/2 and fabric interconnect B:1/18

Similar Messages

Maybe you are looking for