No liscense for the device type?

So, my Digital Editions refuses to let me view my ebooks or download them. Everytime I try
something the "Document not liscensed for this device type" message pops up.
Anyone know what this is all about and how to fix it?
Thanks in advance.

I had the same problem with my Nook, but it was because when I first installed ADE, I didn't have an Adobe user name. It installs ADE differently when you do that.
So I dug around on the hard drive and found Adobe stuff all over the place, including not only user areas, but the system areas also. Deleted every reference to ADE and the Adobe stuff I knew wouldn't affect my other Adobe products and restarted, re-installed ADE and then plugged in the Nook, and THEN started ADE. It found the Nook and it works fine now.
I don't know if this is the fix in your case.

Similar Messages

Textbook download error message: "Document is not licensed for this device type"

Hi everyone,
I bought a textbook that came with a free digital edition. I downloaded it, then tried to load it into Digital Editions (which I registered to my account). The texbook almost finished importing, then at the very end gave me an error message that said "[The name of the book]: Document is not licensed for this device type." The textbook is published by Aspen Law. I'm running Mac OS X 10.7.1 (Lion). Has anyone else had a similar issue or know of a resolution?
I've looked at other forum posts, and my situation seems remarkable like this one:
http://forums.adobe.com/message/3098928#3098928
I called the publishing company and tried to explain this to them, but they just said it was a problem with Adobe and Mac.
Thanks in advance,
Chris

OK - here's the issue.
When I downloaded Adobe Digital Editions I authorized my computer with my Adobe Account - apparently I wasn't supposed to do that. McGraw-Hill said that their file would ONLY work if the computer was not authorized with an Adobe Account (they should have said so after the order).
So after de-authorizing the account (ctrl+shift+d) I tried to open up the .acsm file again and I got a new error: e_lic_already_fulfilled_by_another_user. I'm afraid that the license was used up by Adobe Account, never mind that it actually never downloaded.
I guess the next step is to try and get another license issued?

HT201272 click the tab for the content type you're looking for (Music, Movies, TV Shows, Apps, or Books). No. a lie

"From your Purchased page, click the tab for the content type you're looking for (Music, Movies, TV Shows, Apps, or Books)."
Ok, Movies only in US.. that is fine.. BUT I only have Apps and Books to select. Where is my option to download my music again? I can see my purchases under my account but from the store trying to follow the described method - impossible!
I don't care about apps or books.. music.. I want my paid music. No wonder people pirate music?!

Zesty.Zooma wrote:
But will I be able to keep the data stored in the applications, photos, books and also the sorting and the folder arrangements the same way they were, after erasing all the data and synchornizing with the new library?
That is the aim of the process set out here: Recover your iTunes library from your iPod or iOS device.
tt2

The device type is not recognizable (USIM 9989)

Does anyone know how to resolve this problem? "The device type is not recognizable (USIM9989)"
This problem arises when I am trying to buy an AT&T plan when I was in the US recently, Thanks

Hey All, Just like to share my experience as above with my recent trip to the USA. Like the above comment I too have an iPad with Retina purchased from the Apple Store in HK last year. After arriving and making my way to the ATT store in LA to activate my prepaid the same error occured. An hr later and a lot of head scratching we placed the sim card into another iPad (We'll call it the third version iPad) and went throught the steps of creating an account, choosing a plan and activating the SIM. For what ever the reason my iPad would not activate the card, however activating in another device and replacing it back in mine it worked a treat until the day i left. No settings/apn needed to be altered. A simple restart of the device had it up and running in no time. I could never get to use the inbuilt account side but the web version worked fine.. I cannot comment if its just the HK version of the iPad that gives this error. I would be intrested to know if other users from other countries have had a similer problem.

ALLOCATE CHANNEL FOR MAINTENANCE DEVICE TYPE sbt

what are the scenarios that we have to use the below statement.
RMAN> ALLOCATE CHANNEL FOR MAINTENANCE DEVICE TYPE sbt;

first you have to understand why we allocate channel for rman..it crates a session to target database,To manually allocate a channel, which is a connection between RMAN and a database instance. Each connection initiates an Oracle server session on the target or auxiliary instance: this server session performs the work of backing up, restoring, or recovering backup sets and copies.
Restrictions and Usage of this command
Execute this command only at the RMAN prompt. This command cannot be used within a RUN block.
The target instance must be started.
Do not specify a channel ID.
You cannot allocate a maintenance channel to a shared session.
You cannot prefix ORA_ to a channel name. RMAN reserves channel names beginning with the ORA_ prefix for its own use.
Manually allocated channels (maintenance or normal channels) and automatic channels based on configured settings are never mixed. To perform maintenance on both disk and SBT simultaneously using manually allocated maintenance channels, you must allocate both SBT and DISK channels explicitly.
If you use ALLOCATE CHANNEL FOR MAINTENANCE, then RMAN uses the following convention for channel naming: ORA_MAINT_devicetype_n, where devicetype refers to DISK or sbt and n refers to the channel number. For example, RMAN uses these names for two manually allocated disk channels:
ORA_MAINT_DISK_1
ORA_MAINT_DISK_2
You can allocate multiple maintenance channels for a single job, but you should only use this feature in these situations:
o
To allow crosschecking or deletion of all backup pieces or proxy copies, both on disk and tape, with a single command
o
To make crosschecking and deleting work correctly in an Oracle Real Application Clusters configuration in which each backup piece or proxy copy exists only on one node
here is some example of this command you should check this..
Deleting a Backup Set: Example This example deletes backup sets from tape created more than a week ago:
ALLOCATE CHANNEL FOR MAINTENANCE DEVICE TYPE sbt;
DELETE NOPROMPT BACKUP OF DATABASE COMPLETED BEFORE 'SYSDATE-7';
Crosschecking Archived Logs: Example This example crosschecks all archived logs on disk and tape. For disk, the preconfigured disk channel is used; for tape, an SBT channel is allocated manually. If the logs are not found, then RMAN marks them as EXPIRED in the repository:
ALLOCATE CHANNEL FOR MAINTENANCE DEVICE TYPE sbt;
CROSSCHECK ARCHIVELOG ALL;
Crosschecking on Multiple Nodes of an Oracle Real Application Clusters Configuration: Example In this example, you perform a crosscheck of backups on two nodes of an Oracle Real Application Clusters configuration, where each node has access to a subset of backups. It is assumed here that all backups are accessible by at least one of the two nodes used in the crosscheck. Any backups not accessible from at least one of the nodes are marked EXPIRED after the crosscheck.
ALLOCATE CHANNEL FOR MAINTENANCE DEVICE TYPE DISK CONNECT 'SYS/change_on_install@inst1';
ALLOCATE CHANNEL FOR MAINTENANCE DEVICE TYPE DISK CONNECT 'SYS/change_on_install@inst2';
CROSSCHECK BACKUP;

ALLOCATE CHANNEL FOR MAINTENANCE DEVICE TYPE DISK

Why does the command
"ALLOCATE CHANNEL FOR MAINTENANCE DEVICE TYPE DISK;"
work when running RMAN interactively and not from a script??
The error I get in the script is...
18> ALLOCATE CHANNEL FOR
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01005: syntax error: found "for": expecting one of: "channel_id, double-quoted-string, identifier, single-quoted-string"
RMAN-01007: at line 18 column 18 file: D:\oracle\ora92\hpcs\Rman_DeleteObsolete.rman
How can I delete these obsolete backups from the script?

FIXED IT.
The ALLOCATE CHANNEL FOR MAINTENANCE DEVICE TYPE DISK command had to be outside of the RMAN RUN BLOCK.
All works 100% now.

My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer. The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that. Anyone know how to fix this?

My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer. The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that. Anyone know how to fix this?

Hello there philp_69,
If I understand correctly it sounds like your phone hasnt been recognized in iTunes on your PC since the last couple of updates. I would use the troubleshooting in the following article which will walk you through the steps one by one.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
Thank you for using Apple Support Communities.
All the very best,
Sterling

How do I do this to use OVerdrive media on deviceThe Apple device must be formatted for use with Microsoft Windows. The iTunes setting 'Manually manage music-' must be enabled for the device before you can complete the transfer.

I cannot make these directions work
I downloaded media on Overdrive MEdia on my PC
I have the overdrive media ap on my I pod touch 4g
this media is suppossed to be compatible w/I pd touch
Notes on Transferring OverDrive MP3 Audiobooks…
Most MP3 capable devices should play OverDrive MP3 Audiobooks.
If you intend to transfer OverDrive MP3 Audiobooks to an Apple® device, note the following…
iTunes® v9.0.2 (or newer) is required.
The Apple device must be formatted for use with Microsoft® Windows®.
The iTunes setting 'Manually manage music…' must be enabled for the device before you can complete the transfer. Adjust this setting in iTunes as follows…
Connect the iPod® to your computer.
If it does not launch automatically, open iTunes v9.0.2 (or newer).
In iTunes, locate the device in the left vertical navigation panel (under heading 'DEVICES'), and click the device.
The 'Summary' screen is displayed.
Place a checkmark next to 'Manually manage music…'.
Click the 'Apply' button.
The iTunes 'Summary' screen refreshes, and the changes are saved.
If desired, close iTunes.
Note that if an Apple device is connected to your computer, you can choose to simultaneously transfer a title to the iTunes Library and the Apple device. If you wish to only transfer a title to the iTunes Library, you must first disconnect the Apple device

Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
Also you said " I want to add them to my iCloud, and also back to my computer. " Note that unless subscribe to iTunes match, only iTunes purchases are stored in iCloud.
Also,
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

In sales order for the condition type MWST, **Tax code** is displaying wron

Hi
In sales order for the condition type MWST, *Tax code* is displaying wrongly at header level i.e. FF instead of AO (under account determination tab)
AO tax is 0% but for FF it is 19%
I have checked with the Access sequence it is picking access 08 correctly according to this it should show AO in tax code field for MWST but it is not so..
There is a manual change for tax classification for material master in va02 initially it was blank now it is changed to ' 0 ' is any way influencing....?
Even if I consider material tax classification and customer tax code should not be FF because tax code FF is not maintained for the combination of access sequences for condition type MWST
Please help me.
Rajendra Prasad

Dear Rajendra,
There is a manual change for tax classification for material master in va02 initially it was blank now it is changed to ' 0 ' is any way influencing....?
Definitely material Tax classification will influence to determine the Tax code.
-->So Make sure that customer and material master having proper tax classification indicator.
-->Have you Update the price after changing the tax classification in the sales order.by going to item dat -->condition tab then click on Update push button bottom of the conditions screen.
-->Once again the check the condition record maintanence also for your MWST access sequence.
I hope this will help you,
Regards,
Murali.

There are no readers registered for the sql type.

SQL Developer 4.0
I added .sql and .ldr as file types via Tools > Preferences > File Types.
When I try to open the export.sql file in SQL Developer using the "Import Data" option I get the message:
There are no readers registered for the sql type.
I can open the file with SQL Server Management Studio and see all of the insert statements that i would expect to see.
When I created the export.sql file using the Export Wizard with "Format: insert" I received a message:
"export.sql was not opened because it exceeds the maximum automatic open size."
Can this limit be changed?

The import data dialog is for taking a CSV/XLS/TXT type file.
If you used the Export Wizard, you can now just run that file in the worksheet.

There are no readers registered for the txt type - Issue importing txt file

Hello guys,
I am working on SQL developer 3.2. and Oracle database 11g. I am trying to import a txt file with only two columns and 100 rows separated with a pipe. I can import the same file if its in *.CSV or *.xls format. I right click on the table > Import table > Choose the *.txt file > and then I get a message "There are no readers registered for the txt type". Why? Where do I get the reader? I am using the same exact method and the same exact data to import using a different file format and I do not get any errors. The wizard comes up and I am ready to load. I have scoured through this forum for a solution and I could not find one. Any help is very much appreciated.
Thank you!

It means we don't support that file type for doing imports. It sounds like a reasonable request to [add to the Exchange|sqldeveloper.oracle.com] though.

Error with clob column: "No pl/sql translation for the blind type given for this bind variable"

This is reports 11g
I've got a clob column. Reports seems to recognize its type, but if I try to reference it in a format trigger, I get this error at compile time:
"No pl/sql translation for the blind type given for this bind variable"

Actually, Reports is in something better than Forms.
Neither Forms nor Reports do not have "complete" SQL engine (both have only "complete" PL/SQL engine), but have their own SQL parser, which does not understand SQL commands after the database 8.0.
But, in Reports Data Model - SQL Query Statement, we can write "modern" SQL statement (> database 8.0), because Reports sent it directly to the database, without using their own SQL parser.
For example, in Reports Data Model - SQL Query Statement, we can write this (scalar subquery expressions, in bold):
select empno,
       ename,
       deptno,
       (select dname from dept where deptno = emp.deptno) dname
from emp
order by empno;
although scalar subquery expressions was introduced in the database 9.0.1, and in databases 8.0 and 8.1 we should write someting like this:
select emp.empno,
       emp.ename,
       emp.deptno,
       dept.dname
from emp,
       dept
where dept.deptno = emp.deptno
order by empno;
Regards,
Zlatko

Problem Instanciating BO - No default attribute defined for the object type

Hello Experts,
I am instanciating the BO BUS2038 to ZBUS2038 and when I click in u201Cto implementedu201D and follow u201Cto releasedu201D the message No default attribute defined for the object type is appearing!
Can anybody help, please?

Hello everyone,
it appears to me, that no one has a clue about the "default attribute" and is widely guessing what can be done about that.
I feel deeply sorry for that, Marcos.
At first: You don't really need to care about the missing default attribute. If it's missing, the object's instance key will be used instead. Skip the warning message.
Secondly: The default attribute is used to display the instance within the "Object links & Attachments" under the work item preview when using the SAP Business Workflow.
Thirdly: You can select any existing attribute of your business object type to be the default attribute, by navigating to the "Basic data" (it's the heat-icon within the object builder), use tab "Defaults" and use the Input Help on the field "Attribute".
There you'll go.
Best wishes,
Florin

Changes in the PRICING STRUCTURE FOR THE DOCUMENT TYPE

Hello Gurus,
What is pricing structure?
and what is meant by changes in pricing structure for the document type.
Could anyone let me know about pricing structure and changes in Pricing structure for document type.
prashant

Hi Prashnat,
In SAP Pricing works on Condition Techniqe.
Condition Technic consits to following things.
1.Condition Tabels ( Assigned to Access Sequence )
2.Access Sequence ( Assigned to Condition Types)
3.Condition Types ( Assigned to Pricing Procedure)
4.Pricing Procedure
5.In Pricing Procedure Determination will be assigning as fallows:
Sales Org + Dist Channel + Division + Document Pricing Procedure + Customer Pricing Procedure + Pricing Procedure.
Based on this the Pricing will be takes place in the system.
Hope this Clarifies your Doubts and Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Tax value is not picked up correctly for the condition type in SO creation

Hi All,
I have a issue in Picking up Tax value correctly for the condition type in SO Creation.
Actual Issue:
When creating the sales order manually,
tax value is picked up correctly for one condition type: ISS3.
When the Sales Order is created via Idoc using the function module 'idoc_input_orders', tax value is not picked for same condition type: ISS3.
We need to find out why the value for the condition type 'ISS3' is not picked in this way!
Can anybody solve this issue!
What can be the reason which is stopping picking up tax value for condition type: ISS3 when Sales Order is created via F.M 'IDOC_INPUT_ORDERS'! While it picked up the same while creating Sales Order manuallly.
Thanks in advance.
Thanks,
Deep.

Hi All,
Can anybody give the solution for above posted issue!
Working:
When creating the sales order manually,
tax value is picked up correctly for the condition type ISS3.
Actual Issue:
When the Order is created via Idoc using the function module 'idoc_input_orders',
tax value is not picked .
I need to find out why the value for the condition type 'ISS3' is not picked.
I have debugged the issue from WE19 but upto Conditions tab it is picking up tax value but then it is becoming zero again it remains zero after saving SO.
But Manually tax value is picked up for condition type ISS3 and remains same after saving order.
I have debugged it several times fro WE19 but not able to find route cause for the issue.
What can be the issue over here!
Can anybody give me solution for the same!
Thanks in advance.
Thanks,
Deep.

No liscense for the device type?

Similar Messages

Maybe you are looking for