"No list generated" when run RFKORD00

Hi,
I have implemented ECC 6.0 and when run RFKORD00 report (cash), the system show me "no list generation".
Initially i have activatted the splitting document, but now i have deactivated.
Regards,
Ionel M

Lonel,
There could be one of many possible reasons why this standard program gives you no output.
I assume you've read the program document (that little i at the top of the selection screen), and found it deficient, and I'm also assuming you've checked, and double-checked your customizing and found nothing missing.
You might want to check the selection screen parameters in that case. Also, some programs refuse to generate an output for a reason as trivial as inappropriate output list variant selected. Careful scrutiy should reveal such problems.
I (or anyone else for that matter!) can't provide any more details without having actual access to your system, or having much mroe information - primarily:
- what is the related customziing
- what is the related transaction data passed before attempting RFKORD00
- what is the output you are expecting when you are running RFKORD00.
Hope this helps.
Regards
Gulshan

Similar Messages

Error -17300 is generated when running selected step

Error -17300 is generated when running selected step (with ot without process model).
Using TestStand 2.0.1f1
See BMP file for error dialog.
I was trying out the example in the Resource Library - TestStand | Process Models | Running Selected Steps via Execution Entry Point -Test UUTs or Single Pass
(link http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3E2B756A4E034080020E74861&p_node=DZ52222&p_source=external ). This example is a 1.0.1 example but the web page does say that it should work in 2.0.x
I followed the readme file to use from "Execute" menu:
I have attached the resulant SequentialModel.seq file.
The modifications to the SequentialModel.seq file appears to wo
rk, but when I tried to run 'Run Selected Steps Using' menu item. I got the error message -17300 displayed. (see ErrorScr.bmp attached). The only way to close the execution was to launch Task manager and 'End Task'.
I have attached a small demo sequencefile.
To try example:
Move the SequentialModel.seq to 'C:\TestStand\Components\User\Models\TestStandModels'.
Launch TestStand Sequence Editor and open 'Debug Example1.seq'.
This is how to generate error condition-
1. Run the sequence file from menu Item Execute | Single Pass. You should get a full run with test result, it fails but that doesn't matter.
2. Select Steps 1 and 3 in Main of MainSequence. Run Selected Steps using Single Pass. Again sequence executes correctly.
3. Now run the same selected steps using the new menu item Execute | Selected Test(s). Again the sequence executes again.
4. With Steps 1 and 3 still selected. Run Selected Steps using Single Pass (as in 2 above). This time the error -17300 will be gener
ated.
I also tried running the sequence first doing step 1 (as above), then step 3, then repeating step 1 and this was ok. So the problem appears to be in interactive only.
Any clues as to whats going on and how to resolve it.
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
SequentialModel.seq ‏174 KB
Debug_Example1.seq ‏19 KB
ErrorScr.bmp ‏915 KB

Hi,
TestStand 2.0.1f1
Attached is a SequentialModel.seq that will run selected steps in a new execution using the process model. (It started life based on the inital
demo example)
When either Test UUT's or Single Pass is selected a check is made to determine if there is an initial selection.
If there isn't then the normal Test UUT's or Single Pass sequence is run.
If there is then a new sequence file is created with a new MainSequence. The selected steps are cloned and inserted to the new MainSequence. Also
the Setup and Cleanup groups are also cloned. Likewise the FileGlobal Defaults are copied to the FileGlobals of the new Sequencefile and also the
Locals.
Any Sequences contained in the SequenceFile are cloned to the new sequencefile (except the MainSequence, SequenceFileLoad and SequenceFileUnLoad).
In addition, as the Steps are cloned any break point are also set in the new sequence file.
The new sequence file is executed in a new execution using the process model entry point with the break on first step controlled from the menu
option.
One thing I am assuming is that there is only one element in the RunState.InitialSelection.SelectedSequences array.
Question: Under what circumstances will there be more than one selected sequence?
I had one problem, I tried my SequentialModel.seq with the demo auto.seq. This contains the SequenceFileLoad and SequenceFileUnload.
When I run this demo with a few steps selected, it run ok but when I closed the results window the UnloadFile callback was executed.
I found an option that can be set with the Engine.ReleaseSequenceFileEx which should have stopped the UnloadFile callback from running. But it
made no difference.
I then came across SequenceFile.UnloadCallbackEnabled() and using this function it did disable the Unload callback and this worked.
Question: So, Why didn't setting the Option in the Engine.ReleaseSequenceFileEx work?
Limitation using this SequentialModel.seq,
1) Any precondition to a step's execution based on the result of an early steps are not check when cloning the selected steps. Therefore this has
to be done manually when making the selection.
2) All Sequences in the SequenceFile are cloned to the new sequencfile. (May not be a problem when SequenceFile contains only a few sequences.)
3) The selections are limited to the MainSequence. If steps are selected in a Subsequence then these would be copied to a new MainSequence and
this would be run. Providing this doesn't require any parameters passed from the original caller then this should still run. The problem will
arise if parameters are required.
4) This is not really a limitation - If a full run of the SequenceFile using Test UUT's or Single Pass is required then the user must ensure no
steps are selected.
What I whould like to happen is the ability to make a selection in SubSequence calls either one or two levels down from the MainSequence. The new
execution setup would contain those steps in the MainSequence that are required to call those selected steps in the lower levels.
Would welcome any comments on my SequentialModel.seq attached and answers to my questions.
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
SequentialModel.seq ‏233 KB

Errors generated when running batch anlysis report

Dear Guys,
When i run my batch analysis in the server, i keep seeing the error below generated in the logs:
Jul 1, 2009 3:49:36 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
INFO: Exception in Server SLD_UC:
com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Wed Jul 01 15:49:36 GMT+08:00 2009.
This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
Could not start server: Connect to SAP gateway failed
Connect parameters: TPNAME=SLD_UC GWHOST=localhost GWSERV=sapgw01
ERROR       partner '127.0.0.1:sapgw01' not reached
TIME        Wed Jul 1 15:49:36 200
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2513
DETAIL      NiPConnect
SYSTEM CALL connect
ERRNO       79
ERRNO TEXT A remote host refused an attempted connect operation.
COUNTER     520
May i know what is the reason for the error and also what is the solution for this matter? I could not figure it out...
As the report is running very slow in the system, could this be one of the cause of the performance issue?
Appreciate your reply, thank you in advance.
regards,
wei how

Hello Lee,
1) First of all check your GRC server's hosts and services files,
    The hosts file contains corrects IP address hostname of your backend system
    The services file contains correct sapmsSID & sapgw00 or 01 entries
2) Check your SLD is correct.
Go to http://hostname:50000/sld
Administrator-> Profile -> select Section as Datasupplier, DataTrace to True,. GatewayHost to correct backend system hostname and GatewayService to the correct gateway service which you have given in the backend system while running rz70.
Then check your issue id resolve or not.
Regards,
Sudip

No Scheduling line is generated when RUN MRP

Hi Gurus,
My SA type is 'LP', source list is marked with 2 'relevant to scheduling line'.
then i RUN MRP with parameters 33132, but no scheduling line is generated, could you help me find the reason , thank you!
BR,
Dragsky

Dear Dragsky,
You need to create scheduling agreement in ME31L
Also check this link
[Schedule Lines not getting created in MRP;
Regards
Madhu

In app run if no list generated what are the possible causes

afetr the app run when i click on execute system showing no list generated. what r the possible causes?

Hi
1. no due date open items are not availabe for that vendor.
2. please check the vendor master. payment method are defind or not.
then you will run the APP cycle.
Regards
Ram

How to display list process, when i run sql*loader in c#

Hello,
How to display list process, when i run sql*loader in c#. I mean when i run sql*loader from cmd windows, i get list process how many row has been inserted. But when i run SQL*Loader from C#, i can't get process SQL*Loader.
This is my code:
string strCmd, strSQLLoader;
string strLoaderFile = "XLLOAD.CTL";
string strLogFile = "XLLOAD_LOG.LOG";
string strCSVPath = @"E:\APT\WorkingFolder\WorkingFolder\sqlloader\sqlloader\bin\Debug\8testskrip_HTTP.csv";
string options = "OPTIONS (SKIP=1, DIRECT=TRUE, ROWS=1000000,BINDSIZE=512000)";
string append = "APPEND INTO TABLE XL_XDR FIELDS TERMINATED BY ','";
string table = "OPTIONALLY ENCLOSED BY '\"' TRAILING NULLCOLS (xdr_id,xdr_type,session_start_time,session_end_time,session_last_update_time,session_flag,version,connection_row_count,error_code,method,host_len,host,url_len,url,connection_start_time,connection_last_update_time,connection_flag,connection_id,total_event_count,tunnel_pair_id,responsiveness_type,client_port,payload_type,virtual_type,vid_client,vid_server,client_addr,server_addr,client_tunnel_addr,server_tunnel_addr,error_code_2,ipid,c2s_pkts,c2s_octets,s2c_pkts,s2c_octets,num_succ_trans,connect_time,total_resp,timeouts,retries,rai,tcp_syns,tcp_syn_acks,tcp_syn_resets,tcp_syn_fins,event_type,flags,time_stamp,event_id,event_code)";
strCmd = "sqlldr xl/secreat@o11g control=" + strLoaderFile + " LOG=" + strLogFile;
System.IO.DirectoryInfo di;
try
System.Diagnostics.ProcessStartInfo cmdProcessInfo = new System.Diagnostics.ProcessStartInfo("cmd.exe");
di = new DirectoryInfo(strCSVPath);
strSQLLoader = "";
strSQLLoader += "LOAD DATA INFILE '" + strCSVPath.ToString().Trim() + "' " + append + " " + table;
StreamWriter writer = new StreamWriter(strLoaderFile);
writer.WriteLine(strSQLLoader);
writer.Flush();
writer.Close();
// Redirect both streams so we can write/read them.
cmdProcessInfo.RedirectStandardInput = true;
cmdProcessInfo.RedirectStandardOutput = true;
cmdProcessInfo.UseShellExecute = false;
cmdProcessInfo.LoadUserProfile = true;
//System.Diagnostics.Process.Start("CMD.exe", strCmdLine);
// Start the procses.
System.Diagnostics.Process pro = System.Diagnostics.Process.Start(cmdProcessInfo);
// Issue the dir command.
pro.StandardInput.WriteLine(strCmd);
// Exit the application.
pro.StandardInput.WriteLine("exit");
//Process[] processlist = Process.GetProcesses();
//foreach(Process pro in processlist){
Console.WriteLine("Process: {0} ID: {1}", pro.ProcessName, pro.Id);
Console.WriteLine(pro.StandardOutput.ReadLine());
// Read all the output generated from it.
string strOutput;
strOutput = pro.StandardOutput.ReadToEnd();
pro.Dispose();
catch (Exception ex)
return;
finally
Thanks.

friend
sqlldr is an application residing in the OS. procedure runs in the dbms engine.
you cannot run an os command directly from a procedure or a function or a package .
If you want to do so you need to use either a daemon process created by a PRO*C program
or a JAVA stored procedure to do so.
just refer to previous question forums, you can find the solution. Somebody has already given a solution using
java to run an OS command . check it out
prakash
[email protected]

Wrapper program when run in background not generating SPOOL

I have created Program A which calls internally Program B or C based on the condition. When I run the program B or C independently in Background it generates the spool on completion. But When I run the program A in Background, Spool is not getting generated.
My requirement is that Spool should be generated when Program A is executed in Background.
Below is the code of program A:
PROGRAM A.
    IF p_cons = 'X'.
*-->Detailed Details of Interim or Final Settlement
      SUBMIT B               WITH p_vtnr   EQ p_vtnr
                             WITH p_setqty EQ p_setqty
                             WITH p_test   EQ p_test
                             WITH s_abrdat IN s_abrdat
                             WITH r2       EQ r2
                             WITH r1       EQ r1
                             AND RETURN.
    ELSE.
*-->Summary Details of Interim or Final Settlement
      SUBMIT C                   WITH p_vtnr   EQ p_vtnr
                                 WITH p_setqty EQ p_setqty
                                 WITH p_test   EQ p_test
                                 WITH s_abrdat IN s_abrdat
                                 WITH r2       EQ r2
                                 WITH r1       EQ r1
                                 AND RETURN.
    ENDIF.
Please guide me on this.
Regards,
Naveen

Hi Naveen,
Check this
Submit report to job
submit ztest via job l_jobname
                               number l_jobcount
                              to sap-spool without spool dynpro
                             spool parameters ls_params
                          and return.

Microsoft Dynamics AX WebSession() is null in Enterprise Portal when running from a List Page.

Microsoft Dynamics AX WebSession() is null in Enterprise Portal (EP) when running from a List Page.
The WebSession() works for a detail page, but nor a list page in EP.
Does anyone know of a workaround to this issue?
Thanks.
Scott

Hello,
You should ask in the Microsoft Dynamics Community Forums.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Dynamic Parameter List works on desktop but not when run on Crystal Server

Hi,
I have a report, and the database command query takes one parameter ({?Year}. There is a second parameter used for a record select which is a dynamic paramenter list (multiple select, required). When running the report from Crystal Reports 2008 on my desktop, it first prompts for a year, and then once that is entered, it will come back with the list (of Companies) to select from. It works very smootly and as desired.
But when I load this report to Crystal Reports 2008 Server, it will ask for the year (which is a static list), and this is good, but then it comes back with an empty dynamic select list on the next screen.
Are there any special caveats that I need to be aware of in regards to dynamic lists when running from the CR server?
Thanks!

Hi Pat,
This should work but a couple of things to check:
1) Are the two parameters linked to the same database? If the parameters are linked to fields from different tables in different databases then you need to make sure you set the Database Configuration and have the report log on to both databases.
2) Are Crystal Reports and Crystal Server the same version? I had problems with parameters after we upgraded to 2008. We had to install the latest service packs for both Crystal 2008 and the Enterprise Server. Then we installed Crystal 2008 on the same machine the Enterprise Server was on. Crystal Reports and the Enterprise Server share some common files. Some of those files were updated for Crystal but not for the Enterprise Server yet. Once we synched them our reports have run fine.
Good luck,
Brian

List Format Different When Run In Background...

Hi Guys,
When I run a report in the Foreground my List displays normally. It is worth knowing that this list has 36 Columns (36 added to the Field Catalog).
But, when I run it in the background (F9), it seems to "wrap"/"split" the columns... The last few colums are sent to the next line so my field catalog is actually displayed over 2 lines!!!
When running the Report in the background (F9) I did choose the "Properties" button and I set the Rows to be 65 and the Colums to be 255 under the "Format" Parameter. This does not change anything...
We recently upgraded to ERP6.0. I wonder if it is some kind of SAP Standard that changed???
Please advise - Point will be rewarded for usefull awnsers.
Christiaan

Tks, But it is still not working.
I think it is SAP Standard not to go over the 255 limit when run in the background. My list DEFINATELY has more than the 255 limit...
Here is my statement:
REPORT /bsa/rp_purchaseorder_analysis MESSAGE-ID /bsa/mm LINE-SIZE 400.
This does not work. When I use F9, it gives a message : "Formatting is set to X_65_255". I run this WITHOUT overriding and it does not work. I also ran this overriding the settings... I made the columns 400 and it did not work.
I dont think it is possible????
tks
Christiaan

Table Maintainance Generated but getting error when running SM30

Hi Experts,
I am modifying existing ZTable with around 31 fields and Maintainance was not allowed before also no Table maintainance was there. Now i have changed the attributes to allow maintainance and tried creating Table Maintainance generator.
The TMG get created sucessfully but get error message when running SM30 for the Ztable with Run time error saying Coversion Error .
Error Analysis says :
Program SAPLZNMSLG attempted to display the fields of screen 0005 and error occured during the coversion of this data.
Can any one let me know what happened? Expecting replies at the earliest.
Thanks
Smita

Hi,
In Text I/O Template Tab each field name will be there with Column- Name, Type and Text Or I/O Field
Go to Text OR I/O Field (Fields Wherever u have negative value).
Name Type Text Or I/O Field
vbak-menge I/O _.___.___.___,____V
Just add existing blank field ending with V.
Regards,
Nandha

New Output Module install generates an i/o error when running even on a single image.

Adobe *had* removed the Output Module from Bridge, and I see now there is a (tedious) "manual" install to "reinstate" the module available online, but it is not functional. It generates an i/o error when running even on a single image.

I'm afraid this is not helping the OP
There are already to many having this I/O problem showing in several other threads and in this forum there is still no solution found. Can you pass this on to Adobe Tech please?
Thanks

How to generate a list showing Payment Run that how yet to be Executed?

Hi Guys
Besides using se16 table, how can I generate a list showing Payment Run that have yet to be executed?
Thanks
Cheers
Kenny

Hi,
check whether this programm can do the needed: RFZALI20
t-code: S_P99_41000099
Else: build yourself a z-transaction for se16 table and assign it to user roles as required.
Regards
Hein

Error when running XJC-generated code

The following part of an XML schema
     <element name="Parameter">
          <annotation>
               <documentation xml:lang="de">generische Schl��ssel-Wert-Parameter.</documentation>
          </annotation>
          <complexType>
               <sequence>
                    <element name="Name" type="token">
                         <annotation>
                              <documentation xml:lang="de">Name des Parameters.</documentation>
                         </annotation>
                    </element>
                    <element name="Value">
                         <annotation>
                              <documentation xml:lang="de">Wert des Parameters.</documentation>
                         </annotation>
                         <complexType>
                              <simpleContent>
                                   <extension base="anySimpleType">
                                        <attribute name="Type" type="NCName" use="optional" default="string">
                                             <annotation>
                                                  <documentation xml:lang="de">XML-Typ des Parameterwerts (Default=string).</documentation>
                                             </annotation>
                                        </attribute>
                                   </extension>
                              </simpleContent>
                         </complexType>
                    </element>
               </sequence>
          </complexType>
     </element>
is converted by XJC (javadocs removed) into the following Java code:
@XmlAccessorType(AccessType.FIELD)
@XmlType(name = "", propOrder = {
"name",
"value"
@XmlRootElement(name = "Parameter")
public class Parameter {
@XmlElement(name = "Name", namespace = "http://www.ebics.org/H001")
@XmlJavaTypeAdapter(CollapsedStringAdapter.class)
protected String name;
@XmlElement(name = "Value", namespace = "http://www.ebics.org/H001")
protected Value value;
public String getName() {
return name;
public void setName(String value) {
this.name = value;
public Value getValue() {
return value;
public void setValue(Value value) {
this.value = value;
@XmlAccessorType(AccessType.FIELD)
@XmlType(name = "", propOrder = {
"value"
public static class Value {
@XmlValue
protected Object value;
@XmlAttribute(name = "Type")
@XmlJavaTypeAdapter(CollapsedStringAdapter.class)
protected String type;
public Object getValue() {
return value;
public void setValue(String value) {
this.value = value;
public String getType() {
if (type == null) {
return "string";
} else {
return type;
public void setType(String value) {
this.type = value;
This source compiles ok, but when running, it throws an IllegalAnnotationException "@XmlAttribute/@XmlValue need to reference a Java type that maps to text in XML." Changing the type of field "value" in class Value from Object to String solves the problem.
Is this a mistake of XJC or is something wrong with the schema?
Thanks for your support!
Marcus

Hi
Pleaes apply the ABAP related patch or refer to SAP notes where you will find Notes Correction to apply on your system.
Regards
Anwer

Cannot generate data when running TF_TIME_MAPin sample time dimenation ?

I hava done following:
(1)Run the SQL scripts(owb_time_seq.sqlåowb_time.sql )into target schema.
(2) Import the MDL file (owb_bp_time.mdl).
(3) Copy and paste the times dimension into project to be able to use it.
(4)Copy and paste the mapping to mine own project.
(5)Open the mapping, do a right mouse click on the time dimension and select 'Reconcile inbound'. Select matching strategy to match by bound name
(6)succuess deploy the T_TIMEdimenation and TF_TIME_MAP mapping
when run TF_TIME_MAP mapping,there is no data inserting to dimenation table,what can I do? Can anybody tell me how I can resolve the problem?
Thanks!

Hi,
perhaps it's the same UK-Problem like here:
Errors in demo project OWP_BP in OWB 10g

"No list generated" when run RFKORD00

Similar Messages

Maybe you are looking for