No list tree of device and interface, software in MAX sytem. using pci 6034E and chasis 2345

Hye, i got the problem about this device.
I using PCI 6034 E which will connect to SCC 2345 to measure current and voltage.
My os is 32 bit Windows XP.
First i install this software, my MAX listed the tree of devices & interface which is PCI 6034 E and chasis 2345, and all download software are listed in tree of software.
By the way, when i start to measure the current, my MAX is working fine.. but, the problem is starting in the next day, wheni try to measure againt, all the list are dissapear. Then i uninstall all the NI component and reinstall again. Thereare a lot of install and reinstall again and again.. By the way the result is still same. Do not have any tree appear..
so, any colution for my problem?
i try to solve this problem, and i read that when the tree of devices and interfaces not appear, it's maybe because we using driver : NI 488.2 , i try to uninstall this driver.. by the way the result is still same...

sahizansalman,
It looks like the same is happening with the Software list. This is often a sign of a MAX database corruption. I'd try the steps outlined in this knowledgebase: 
What is the Process For Removing MAX Database Corruption?
Feel free to post back if this does not work. 
By the way, do you know what device is showing up as unknown in the device manager? You did not mention anything besides your PCI DAQ card and SCC 2345, which are showing up fine. 
Message Edited by mishkin on 03-11-2010 07:42 AM
Misha

Similar Messages

  • Phishing and cookie software for Mac Lion - Is it needed, and if yes, any suggestions?

    phishing and cookie software for Mac Lion - Is it needed, and if yes, any suggestions?

    no.  OS X does a good job of doing this for you itself.

  • My wife had an iPad for a year and synced to our computer with no problem.  I recently received an ipad2 and when I tried to sync using separate apple and iTunes passwords, under her computer user name, it appears I over-road her account and synced all he

    My wife had an iPad for a year and synced to our computer with no problem.  I recently received an ipad2 and when I tried to sync using separate apple and iTunes passwords, under her computer user name, it appears I over-road her account and synced all her apps with my apps on my iPad.  I then set myself up as a new user on our computer and tried to sync.  I now get the error that my iPad is synced to another library.  How can I start over without erasing all my data on the iPad?

    Go back to her login.  Unless you deliberately erased apps, they should all be there, both yours and hers!  Then, you need to set up each iPad separately.  You will notice that they have separate names for that very purpose.
    There is no problem with multiple Apple IDs on the same iTunes on the same computer except...  Apps are permanently associated with the ID that was originally used to obtain them.  If you choose to update an app from inside iTunes and you're logged into the "wrong" ID, you must log out and back in again.
    On the bright side, you can configure either or both iPads to sync with apps and music and movies, etc. from either or both IDs.  Further, if you choose to update the apps from the iPads themselves, there is no need to log out/in.  The device handles that.  All you need is the correct password.  In my case, I use the same password for both IDs to make things easier.

  • Inquiring about the issue of using PCI-5922 and PCI-5412 simultaneously under Linux OS! Thank you!

    hi all,I am lily and I an AE from NI shanghai .Now I confronted a pullze from customer,and I really feel at a loss! Hope some one of you would come and land me a hand,thank you in advance!
    The problem is as follows:
    Customer use PCI-5922 and PCI -5412 under Linux OS, if they use either of the two cards seperately,there would be OK. but if the use both of the two cards simultaneously, the error will occured as attachment shows. "Error code:-50258 occured at niscope_DAQmx Create Channel (AI-Voltage-Base).vi:2  Possible reason(s):The specified software component failed to initialize."
    Can I know is there any solution vs this probelm?Thank you in advance!!
    Attachments:
    Screenshot-NI-DAQmx Test Panels.png ‏17 KB
    NI-NEW_error.txt ‏8 KB
    shortsyms.txt ‏973 KB

    This is the wrong board for this question, you should re-post here
    Regards
    Ray Farmer

  • I recently moved all of my photos from one portable drive to a new and much larger one. I use LR 5 and and all of the folders now have a ? in their folder icon. The thumbnail is there but no actual photo. How do i reconnect them?

    i recently moved all of my photos from one portable drive to a new and much larger one. I use LR 5 and and all of the folders now have a ? in their folder icon. The thumbnail is there but no actual photo. How do i reconnect them?
    Jim Boehme
    [email protected]

    Duplicate post
    see the answer at your earlier post LR 5

  • Why it is keep asking for Username and Password but i didn't use any username and password with my database.

    Why it is keep asking for Username and Password but i didn't use any username and password with my database. Please help me i m very frustrated right now please help anybody. I m new in this.,

    Hi,
    Please check below threads:
    Crystal Report Layout asking for Login Info
    SAP B1 ask for credentials to print or to preview Crystal Reports report

  • My question is that if I am using Mac and another friend of mine is using Ipad mini and her skpe isnt working and we want to share screens how can we do it through Ichat? Since on facetime screens cant be shared!

    My question is that if I am using Mac and another friend of mine is using Ipad mini and her skpe isnt working and we want to share screens how can we do it through Ichat? Since on facetime screens cant be shared!

    Hi,
    You can't.
    Messages - the replacement for iChat in Mountain Lion and beyond will  do Screen Sharing  but only to the accounts it did in iChat 5 and 6  (actually it includes iChat 4 as well)
    That is to say in earlier version of iChat you could login to AIM and Jabber servers as well as enabling the Bonjour option to chat on your LAN.
    All these will do Video and Audio only chats which in turn means they will Screen Share.
    At iChat 6 an Yahoo option was added but it can only Text chat (it can't even send Files or Pics)
    This means only the Internet able accounts that login in to AIM or to a Jabber server  can Video and therefore Screen Share.
    The iMessages account will Invoke FaceTime if you use the Video icon during text chat.  (I.e. it is not Video inside the app like the AIM or Jabber accounts can do)
    NOTE.
    AIM includes Apple Issued Apple ID as Valid AIM Screen Names.
    Google Mail ID s can be used and Google Talk IDs with Messages as they run a Jabber server.
    Facebook allow you to create a Chat ID (Facebook Chat ID) which is also a Jabber server.
    9:13 pm      Tuesday; June 10, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Not receiving mail sent to and from my own accounts! using latest OS8 and X10.9.5.Using Apple Mail account. Used to be able to do this!

    Not receiving mail sent to and from my own accounts! using latest OS8 and X10.9.5.Using Apple Mail account. Used to be able to do this!

    My system is OS8 and X10.9.5

  • Is there a known conflect between PCI 6034E and 7344

    I just installed a new PCI 6034E and now the DAC on my PC 7344 motion board seems to be putting out non-linear voltages from my position encoder. Does anyone know why?

    LA 75,
    Thanks for your answe,r here are mine.
    1. The 7344 worked fine until I stuck the PCI 6034E in it. I have an update for you on the problem which I learned after more testing. The quaditure count on the encoder is 16384
    I only need to measure -20 to 90 degree angles in my application. When I set up my DAQ channel (using a PCI 6025E which I still have in place) I calibrated based on +10 volts
    out of the 7344 DAC channel (axis 3) = 90 degrees an 0 volts = 0 degrees. What's really happening is that the DAC output is now 12.4 volts and its saturating the DAQ input
    channel. If I recalibrate with 0 volts = 45 degrees I can work around the problem...the thing is I don't know what caused this and what other safety implications there might be.
    2. The new board (PCI 6034E) is in the last slot and the 7344 is in the first slot...in between is an ethernet card and the PCI 6025E.
    3. I do not have another PC to test this thing in.
    Jim Fee

  • HELP... after Mountain Lion and iPhoto software update. My library was updating and then corrupted

    Smooth update to ML and then ran software udate. It suggested I update iPhoto. I did that and then restarted computer and then tried to open iPhoto. It told me that it would update my library and not be able to go back to an earlier version. I clicked okay. Part way through an error window came up saying that my library was corrupted and that I need to go to a back up.  I have most on a back up, but not all. Can I trouble shoot this library or open the package and remove the most recent photos I need to my older back up?
    Please advise - I really like the ML until this happened.

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    Regards
    TD

  • In order to use a US government web software, I need to use version 2, and not a current version. Is there anyway I can download an older version?

    The US Food and Drug Administration uses an authoring browser-based system for creating SPL files called XForms. According to the FDA, the only version of Firefox which is compatible is version 2.0.0.13. The current version of Firefox 3 does not work with the plugin (Mozilla XForms 0.8.5 Add-on).

    No need to use the unsupported and insecure Firefox 2, you can use XForms version 0.8.7 with Firefox 3.6, available from https://addons.mozilla.org/firefox/addon/mozilla-xforms/

  • Issue using PCIe-1430 and Magma ExpressBox1

    Hi - I'm trying to get my laptop working with the PCIe-1430 Camera Link frame grabber and the Magma ExpressBox1. The device shows up in the device manager twice, saying the drivers are installed but there are problems with the device. One device shows error code 10 ("This device cannot start."). The other shows error code 12 ("This device cannot find enough free resources that it can use (Code 12)     If you want to use this device, you will need to disable one of the other devices on this system."
    I've tried disabling one and the other PCIe-1430 devices, and I'm not sure what other devices I could try to disable. The computer has 3GB of RAM, so I'd doubt that's the problem. I've noticed that the board is PCIe x4 and the ExpressBox1 interface is x1, but since there is a bridge in between I assumed this would, at the worst, result in a lower maximum transfer rate. The Magma website mentions National Instruments boards in one of their case studies. Any ideas what may be causing this?
    Thanks

    Hi,
    I have been looking into this, and everyone I look the ExpressBox1 has only 1 PCI slot and it is x16.  Are you using a different version?  If it is only one PCI slot, then it should not show 2 devices in Windows.  Also how many PCIe-1430's are you trying to use?
    Regards,
    Greg H.
    Applications Engineer
    National Instruments

  • I have 2 iphones  and 2 macs for my wife and i ... can i use 1 account and keep the information seperate

    since i have only 1 apple ID account and 2 iphones and 2 macs I would like to keep my apps photos and personal items / settings seperate from my wifes iphone and Mac ... can i do that with one ID or does she need to get her own? we have a large music and video library that we share

    ok so currently all my apple devices are on 1 account if she sets up an apple id account how do i seperate what she has now on the new  account.

  • How can i use PCIe 1433 and basler line camera to construct image and pocess it?

    hello! every one ,I am new to machine vision.i have two problems to ask.First,how can i use line camera and 1433 to acquire 2-D image?second,if i want to pocess the 1-D signal ,how can i do it ?i expect for your answer ,thank you!

    What you are trying to do is not something you can easily do in a forum, but I can give you the basics.
    You have a CameraLink frame Grabber (PCIe 1433) and a LineScan Camera
    The framegrabber needs to be configured to understand how to communicate with the camera.  You need a file from the camera vendor.  This file might already be installed.  You can use MAX to check if it is, under Devices/IMAQ.
    Assuming you can get to the point where you can communicate with the camera, you need to configure your acquisition.
    Since the camera is a line scan camera, it captures image data one pixel ine at a time.  You will need to configure the frame grabber to determine how many lines per image you want.  The low limit is usually 1, and the high limit is either based on the framegrabber's internal memory, or that of the computer.
    If you are using labview, you will need to open a sessing to the camera, acquire the image(s), and then close the session when you are done.
    Once the image(s) are captured, you can performa analysis using the NI Vision Toolkit.
    Sorry, but there is no way to condense years into one post.
    Machine Vision, Robotics, Embedded Systems, Surveillance
    www.movimed.com - Custom Imaging Solutions

  • Problem in creating and updating of  material by the use of bapi and bdc

    Hello All,
    I am using bapi (BAPI_MATERIAL_SAVEDATA ) and than bdc to create and update classification data of material.
    I am facing a problem.
    1) firstly I am creating material by the use of bapi and than after creation i want to update classification data for taht perticular material .
    2) To update classification data i am using bdc . while at the time of updating material through bdc system showing me error that material is currently locked by user (my login name ).
    Please suggest what to do.
    Tkank you
    With Regards
    Shantanu Modi

    When u update/create data it takes sometime to commit. So after using BAPI
    give 10 minutes wait in ur program before updating classification data.
    you can write like
    wait up to 20 seconds.
    and update the classification.

Maybe you are looking for

  • Time is incorrect

    The time on my system is reporting incorrectly. It's 7:41 PM here, I'm CDT (UTC-5:00) but timedatectl status says: Local time: Sat 2013-10-26 14:41:15 CDT Universal time: Sat 2013-10-26 19:41:15 UTC Timezone: America/Chicago (CDT, -0500) NTP enabled:

  • Date format in Bex Output should be changed while using with Text Variable

    I am using a Bex Query where have defined a Text Variable with replacement path. So whatever Date user enters in the selection screen variable (Input Variable) the same date appears in the report description. For Ex: If user enters 30.04.2012 in Char

  • Encoding in file sender adapter

    Hi, I need to read a file which is 7-bit, I am trying to use File Encpding in the CC as - ASCII, but the data is the SXMB monitor is still not converted. Thanks, Naama

  • Can we use content conversion for this structure

    Hi, could any one help me on this MT_Type    Segment(0-unbounded)         field1         field2         field3         Segment 2(0-unbounded)              field1              field2         Segment 3(0-unbounded)              field1              fiel

  • DVDs keep ejecting and won't play

    When I try to insert some dvds, but not all of them, they just pop back out and will not play in the dvd player on my 2008 Macbook Pro. How can I fix this? Is this a dvd problem or a computer problem??? I am baffled and would really love to fix this