No listener registered for service

Hi,
Messages are stuck up in sxmb_moni with status 'System error - Manual Restart Possible'. I restarted the messages twice, but no change.
I see following message when clicked on the red flag in sxmb_moni.
"HTTP response contains status code 503 with the
description no listener registered for service
/file/xxxx_xxxx_xxxxx"
I tried the note 803145 as suggested in one of threads but that too did not work.
Any other ideas ?
Thanks.

I do not know as I have not created it. This was working fine since long. I am supposed to troubleshoot it now.
In addition, I can tell you that an external application gets this file from XI server using sftp.
Thanks.
- Atul

Similar Messages

J2Se receiver File adapter-HTTP 503 no listener registered for service

Hi,
We are using J2Se file adapter for one the interfaces and the logs of the J2se adapter engine has shown the following error-
Error: com.sap.aii.messaging.net.TransportException: HTTP 503 no listener registered for service /file/example_outbound
     at com.sap.aii.messaging.net.HTTPRequest.run(ServerHttpImpl.java:416)
I checked with the J2SE File/FTP receiver adapter configuration given at help.sap and found the following the following info related to the error-
Specifications for addressing by the Integration Engine
○       XI.httpPort=<port_no>
<port_no>specifies the HTTP server port that receives the messages from the Integration Engine.
○       XI.httpService=<service>
<service> describes the service part of the address where the Integration Engine must send its messages.
These specifications are mandatory.
If, for example, you have specified XI.httpPort=1234 and XI.httpService=/file/Receiver, the end point address of the file/FTP adapter in the Integration Engine must be specified as follows:
http://<fileadapterhost>:1234/file/Receiver
The end point address must be extended as follows for the Integration Engine in Release 1.0:
http://<fileadapterhost>:1234/file/Receiver?action=execute&pipelineid=Receiver
If the Integration Engine message is sent to a non-specified adapter service, the system displays the following error message:
*No registered listener for <Service> found*
The system displays the same message if the adapter is initialized, but has not been started (status STOPPED or INITIALIZED).
Where I need to check this Integration engine address specifications. I have't found any of the above code in the adapter configuration which we are using presently.The interface is running successfully before but thrown this error now.
Please reply me if some one has faced similar issue and get it resolved.

Hi
How was this issue resolved? I have the same problem.
I only have two receivers - the deafult j2se file receiver and my newly created one which used the default as a template. The ports and service's are different.
I've even tried deleting my custom receive adapter and using only the default one but i still get that error.

The listener supports no services - auto register with a non-default listen

Hi, I have this error when I check lsnr status...
$ lsnrctl status L_EST
LSNRCTL for HPUX: Version 10.2.0.4.0 - Production on 24-APR-2009 16:27:05
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias L_EST
Version TNSLSNR for HPUX: Version 10.2.0.4.0 - Production
Start Date 23-APR-2009 16:33:11
Uptime 0 days 23 hr. 53 min. 54 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u02/app/oracle/product/10.2/Db_1/network/admin/listener.ora
Listener Log File /u02/app/oracle/product/10.2/Db_1/network/log/l_est.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.142.245)(PORT=1541)))
The listener supports no services
The command completed successfully
$
I want PMON to register with a local listener that does not use TCP/IP, port 1521.
Can somebody tell me how I should procede?

This is my listener.ora file.
$ cat listener.ora
# listener.ora Network Configuration File: /u02/app/oracle/product/10.2/Db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
RK/ADMIN/LISTENER.ORA = rk/admin/listener.ora
L_EST =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = myHostname)(PORT = 1541))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u02/app/oracle/product/10.2/Db_1)
(PROGRAM = extproc)
$Thanks
damorgan wrote:
Post your listener.oraEdited by: martinmorono on Apr 24, 2009 5:47 PM

How can I contact customer service because my registration number according to Adobe cannot be upgraded; and Adobe's message to me said that I was registered for CS4; I am currently registered for CS5. Is there no way to contact customer service via emai

How can I contact customer service because my registration number according to Adobe cannot be upgraded; and Adobe's message to me said that I was registered for CS4; I am currently registered for CS5. Is there no way to contact customer service via email or phone re this problem?

Problems with registration you can contact our support team at Contact Customer Care. Please make sure you are signed in and selecting the proper selections from the pull down. If you continue to not be able to contact our support team then I would strongly recommend the use of a different web browser, computer, smart phone, or tablet.

Problems registering for online services

For goodness sakes, for the last week I've been trying to register for a new online account with my phone and I go through the whole form each time just to be told there are technical errors! Please sort it EE!

Hi ,
I'm really sorry to hear about this - let me see if I can help, or at least point you in the right direction. Have you tried clearing your cache or cookies on your browser? This may help. Alternatively, you could try registering on a different browser (Google Chrome, Internet Explorer, Firefox) for example. Let me know if the above helps - if it doesn't, I'll see what I can do to help further. Cheers,
Titanium
Was my post helpful? Please take 2 seconds to hit the 'Kudos' button below

Oracle 11g Listener Supports No services

I have installed Oracle 11g in Linux (Centos). i created a starter database using dbca. I also created a listener.ora using netca.
I have observed that that the listener.ora was only generated like this after running netca:
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST =proky.warnerbro.com)(PORT = 1521))
)Now when i start this listener, I get a message: "The listener supports no services".
I have read on some forums that something like this should be included:
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = $$###$)
      (ORACLE_HOME =$ORACLE_HOME)
      (PROGRAM = extproc)
    (SID_DESC =
      (GLOBAL_DBNAME = orcl)
      (ORACLE_HOME = $ORACLE_HOME)
      (SID_NAME = orcl)
)So, my question is, do dba's edit this manually or there should be a tool or wizard that would generate this text in listener.ora.
thanks in advance,
Anton

Thanks guys.
Another question though.
How can I edit the listener that is used by emctl (database control)? Cause I have edited my listener.ora. I have removed an entry originally listened to by database control. For Example, originally there was a listener called listener3 which was used by emctl. Now I run netca and remove "listener3" and add one listener "listener". If i check listener.ora at ORACLE_HOME/network/admin, the file now has an entry listener and no more listener3.
However when I start emctl, it says there that is still uses the "listener3" listener
So even if i issued a "alter system register" at sqlplus, I still can't find my database on emctl.

The listener supports no services

Hello,
I have trouble to connect to DB after unxpected reboot due power outage ...
Listener is not running. After start of Listener is not possible to connect to DB still.
Here is the state of Listener:
lsnrctl stat
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 30-AUG-2011 11:25:58
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 30-AUG-2011 11:25:12
Uptime 0 days 0 hr. 3 min. 46 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/CS-Oracle/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=CS-Oracle.***.co.at)(PORT=1521)))
The listener supports no services
The command completed successfully
Listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = CS-Oracle.****.**.at)(PORT = 1521))
ADR_BASE_LISTENER = /u01/app/oracle
Thank you in advance for your help

user13726158 wrote:
When I used alter system register; so I get the following error ORA-01034: ORACLE not available,
In case when I tried to startup DB so I get following errors:ORA-32004: obsolete or deprecated parameter(s) specified for RDBMS instance
ORA-16032: parameter LOG_ARCHIVE_DEST_1 destination string cannot be translated
ORA-07286: sksagdi: cannot obtain device information.
Linux-x86_64 Error: 2: No such file or directory.So you need to drop or fix your LOG_ARCHIVE_DEST_1 initialization parameter. It would appear from the last error in the stack that it refers to a non-existent directory or a directory on which the owner of the oracle binaries does not have write permissions.

SCAN listener supports no services

Hi all,
Our's DB: 11.2.0.1.0. Its 2 node cluster.
$srvctl status scan
SCAN VIP scan1 is enabled
SCAN VIP scan1 is running on node1
SCAN VIP scan2 is enabled
SCAN VIP scan2 is running on node1
SCAN VIP scan3 is enabled
SCAN VIP scan3 is running on node2
@node1$ps -ef | grep tnslsnr
oracle xxxxx ..... /u01/app/11.2.0/grid/bin/tnslsnr LISTENER -inherit
oracle xxxx ..... /u01/app/11.2.0/grid/bin/tnslsnr LISTENER_SCAN1 -inherit
oracle xxx ..... /u01/app/oracle/product/11.2.0/db_1/bin/tnslsnr LISTENER -inherit
oracle xxx ..... /u01/app/oracle/product/11.2.0/db_1/bin/tnslsnr listener_scan2 -inherit
@node2$ps -ef | grep tnslsnr
oracle xxxx ..... /u01/app/11.2.0/grid/bin/tnslsnr LISTENER_SCAN3 -inherit
oracle xxxx ..... /u01/app/11.2.0/grid/bin/tnslsnr LISTENER_SCAN2 -inherit
oracle xxxx ..... /u01/app/11.2.0/grid/bin/tnslsnr LISTENER -inherit
oracle xxxxxxx ..... /u01/app/oracle/product/11.2.0/db_1/bin/tnslsnr listener -inherit
@node1$lsnrctl status listener_scan2
Listener Parameter File //u01/app/11.2.0/grid/network/admin/listener.ora
Listening Endpoints Summary..
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER_SCAN2)))
The listener supports no services
The command completed successfully
??? Though Listener_scan2 is running on node1,why it shows on ps -ef on node 2 ?
Why listener_scan2 processes from ORACLE_HOME instead of CRS_HOME?
Thanks

I assume SCAN name:1521 is in fact a proper IP address or hostname with the port number?
The Oracle instance will attempt to connect to that IP and port to register its services.
If it is a hostname and not IP, then make sure it resolves correctly to an IP address on that server. If name resolution fails, then without an IP for that name, the Oracle instance cannot register its services.
Once you have made sure that hostname resolution works, the next step is to check whether there is in fact a network service on that IP address, listening on that port.
Two methods can be used. The netstat command (run on that server that owns that IP) will show all tcp listener end points. Use the -n switch to display numerics (and not hostnames). The netstat output should contain and entry "+ip_address:1521+ or +*:1521+ - this will confirm that there is a network service on that port for that IP address.
The more detailed method is using the +lsof+ (list of files) command on the SCAN listener process (find the +pid+ and specify it via the +-p+ command line switch). This command will show all open file handles for the specified process - including socket handles. One of these should be on that IP address for port 1521.
If you have confirmed that both the Oracle instance has the correct SCAN details and that the SCAN listener is actually listening on that tcp port and IP, and registration still does not work - then it could be a connectivity problem.
From the +oracle+ o/s account on the db server, test connectivity to that port and IP using +telnet+.

Listener: Listener supports no services.

In 11gR1 RAC, my listener is giving the following output.
lsnrctl statusConnecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Solaris Error: 146: Connection refused
All the database instances are working fine and I am able to connect to sqlplus prompt with all SID's.
I even tried re-editing the listener.ora and manually register the instances.
I then started the listener but it gave me an output : "*The listener supports no services*"
Am I missing something? Please help.

I got this resolved by adding an entry in the lisener.ora file present in $ORACLE_HOME/network/admin
Below is my complete file of listener.ora file
# listener.ora Network Configuration File: /oracle/product/11.2.0/dbhome_2/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.10.10)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = orcl)
(ORACLE_HOME =/oracle/product/11.2.0/dbhome_2)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = orcl)
(ORACLE_HOME = /oracle/product/11.2.0/dbhome_2)
(SID_NAME = orcl)
ADR_BASE_LISTENER = /oracle
After this when i stopped and started oracle listener
lsnrctl stop
lsnrctl start
then it shows the services has been started
lsnrctl status
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 20-JUL-2012 02:35:34
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.10.10.10)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.2.0 - Production
Start Date 20-JUL-2012 02:35:16
Uptime 0 days 0 hr. 0 min. 17 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/product/11.2.0/dbhome_2/network/admin/listener.ora
Listener Log File /oracle/diag/tnslsnr/ipm/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.10.10.10)(PORT=1521)))
Services Summary...
Service "orcl" has 1 instance(s).
Instance "orcl", status UNKNOWN, has 2 handler(s) for this service...
The command completed successfully
THUS ..... it starts
do not forget to turn off firewall

Listener Supports no services

Hi DB Experts,
I am new to the Oracle DB and specifically 11g.
I have a VM Ware machine, which had Oracle DB installed.
When I am trying to start the DB server, I get the below logs:
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 17-FEB-2012 01:36:53
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Starting /u01/app/oracle/product/11.2.0/dbhome_1//bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Log messages written to /u01/app/oracle/product/11.2.0/dbhome_1/log/diag/tnslsnr/fmw/listener/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=fmw)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 17-FEB-2012 01:36:54
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File /u01/app/oracle/product/11.2.0/dbhome_1/log/diag/tnslsnr/fmw/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=fmw)(PORT=1521)))
The listener supports no services
The command completed successfully
SQL*Plus: Release 11.2.0.1.0 Production on Fri Feb 17 01:36:56 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> ORACLE instance started.
Total System Global Area 534462464 bytes
Fixed Size 2215064 bytes
Variable Size 394265448 bytes
Database Buffers 130023424 bytes
Redo Buffers 7958528 bytes
Database mounted.
Database opened.
Why is that message flashed - Listener supports no services and Connected to an idle instance
Is my listener no registered with the ORACLE instance of the database?
Please help

840235 wrote:
Hi Billy,
I am trying to start the DB using the ./dbstart ORACLE_HOME
There are no messages flashed.
I could get the listener started. But still, the instance is not registered with the listener:
The instance will attempt to register itself with the listener when it (the instance) starts. If the listener is not started, it obviously cannot register with the listener.
The instance will register/attempt to register with the listener every minute or so (I forget the exact interval). So if the instance starts first, when the listener finally starts, it will have to wait until the next registration request from the instance before it knows about the instance.
>
[oracle@fmw bin]$ ./dbstart /u01/app/oracle/product/11.2.0/dbhome_1
[oracle@fmw bin]$ ./lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 17-FEB-2012 02:33:28
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 17-FEB-2012 02:32:53
Uptime 0 days 0 hr. 0 min. 34 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/11.2.0/dbhome_1/log/diag/tnslsnr/fmw/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=fmw)(PORT=1521)))
The listener supports no services
The command completed successfully

This device is currently being registered for ePrint. Please try again later.

I bought a new HP LaserJet 500 Color M551dn earlier this week and when I click on "Enable HP Web Services" it has been stuck on the following message for days: "This device is currently being registered for ePrint. Please try again later." I have tried manually assigning a new IP address and changing the DNS settings to 8.8.8.8 and 8.8.4.4 as suggested in other posts but it has not made any difference. Perphaps someone from HP can resolve this issue. Please help.

@trivea
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Unable to Externally Register Phone Services on Cisco Jabber Client via Expressway E

Hi,
I have currently deployed Cisco Jabber along with Expressway C and E for external regeneration without VPN. I have successfully registered IM and Presence service externally on the internet and I am able to chat with other Jabber users.
I am not able to register phone services for Cisco Jabber client who are registering externally over the internet without VPN.
I have checked that all the users are able to use IM and Presence along with Phone services in the internal network and over the internet using VPN. I have configured the required DNS SRV records on both the internal and external DNS Servers.
I am attaching a screen shot of the Jabber Client that is registered over the internet along with this post for your reference.
Appreciate if you can share your thoughts on the same.
Please do let me know if you need any further informaiton.
Thank you.
Regards,
Joseph Chirayath.

I am testing with an android device, and I had to add a "digest user" on the BOT device in order for this to work. Phone services are now connected.

How To Register For a New eFax Account on the Photosmart eStation

If you ever find yourself unable to log in to your eFax account and you have contacted HP Technical Support and eFax only to find the problem cannot be fixed by either party, there is a way to register for a different account but the only way to do this involves using a Photosmart eStation. The error you may get will read "Invalid Login" and is only applicable on the Photosmart eStation, HP Envy Series, and the Photosmart 7510 regardless of whether you are trying to create a new account or just access one that already exists, here are the steps to fix that:
1. Go to www.efax.com and sign in.
2. Select "Update Account" and then select the profile tab.
3. Change the current contact email to a dummy/alternate email (must have a phone number listed on this page before changes will go into effect).
a) Using the @hpeprint.com email may cause problems.
b) Log out of eFax account.
4. Go to the E-station and follow these instructions to be able to register for a new account:
a) On the top of the E-station, select the 3rd Menu button (3 lines) and go to
b) Select Settings then
c) Tools then
d) Advanced then
e) Applications and
f) Manage Applications
g) next Filter > select All and wait for all the apps to load.
h) Scroll down to very bottom for Webfax
i) and then Clear Data in this section
j) Select the Home button at the top and
k) Select Efax and register for a new account with a preferred email and zip code
l) Write down the new phone number and check your email for a new 4-digit PIN
5. Repeat these steps to clear the Web Fax data and then try to login to efax.com on the printer by selecting
a) eFax button
b) Settings
c) Account and upgrade information
d) Change
e) After selecting chance, in this area, login to eFax on the printer with the new number and pin.
6. The best test to ensure everything is working now is to send yourself an eFax so you can check for incoming and outgoing processes to be just as you expect it to be.
7. Print the ePrint info page so that the printer's ePrint email address will be associated with the new eFax account.
And that is the trick on how to get a new eFax account if you are experiencing issues with signing in from the front panel of the printer. If you do not have access to a Photosmart eStation, then contact HP Cloud Services at 1-855-785-2777 if you live in North America or are an English-speaking customer for assistance with this step.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Here is a picture of the Photosmart eStation:
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

I just subscribed to iTunes Match but I find my iPhone 4s is matched to the wrong Apple ID. iCloud is properly linked to the same Apple ID I registered for iTunes Match but I can't seem to get my iPhone to link Match to that ID.

How can I link iTunes Match to my proper Apple ID? I have two ID's and my phone accesses iCloud with the proper ID but it insists on trying to access iTunes Match using the wrong ID so I get the message that I'm not registered for iTunes Match.

The iCloud and iTunes Store account ID are not the same thing. They can be different although some folks, like myself, do have the same Apple ID for all the Apple services. Go to Settings > Store and enter the exact same iTunes Store account ID you used to purchase iTunes Match. Be aware you can only switch Apple IDs on an iOS device every 90 days.

Unable to register the service in OWSM

Hi All,
Registered 4 services successfully While registering another services in the OWSM i am facing the below error
Failed to add service because of the following reason:
Failed to add default policy
Refer logs for additional information
Use your browsers "Back" button if you would like to try again.
LOGS:
2009-08-15 14:26:02,558 INFO [OC4J Launcher] agent.AgentRuntime - Policy Manager URL is http://etd36s15:8888/policymanager
2009-08-15 14:26:02,732 WARNING [Thread-60] configuration.PolicySetWatchdog - Failed to retrieve policy set from policy manager with url http://etd36s15:8888/policymanager/services/RegistrationService: com.cfluent.policymanager.sdk.base.exception.ServerException: (404)Not Found
2009-08-15 14:26:03,208 INFO [OC4J Launcher] fs.FoundationServiceManager - Reloading Foundation Services
2009-08-15 14:26:13,040 WARNING [Thread-60] configuration.PolicySetWatchdog - Failed to retrieve policy set from policy manager with url http://etd36s15:8888/policymanager/services/RegistrationService: com.cfluent.policymanager.sdk.base.exception.ServerException: (404)Not Found
2009-08-15 14:26:24,171 INFO [Thread-60] configuration.PolicySetWatchdog - Latest Policy Set version is 4
2009-08-15 14:26:24,198 INFO [Thread-60] CSWComponent - AsyncMessageLogWriter paramemeters: maxEntries=1,000 maxMemory=5,000,000 blockWhenFull=false
2009-08-15 14:26:24,208 INFO [Thread-60] configuration.PolicySetWatchdog - Policy Set version 4 is loaded

Hi Sab2
Please go through this thread
OWSM gateway issue
In your case, may be you need to redeploy the gateway
Regards,
Squirell

No listener registered for service

Similar Messages

Maybe you are looking for