No Listener service after installing Oracle 10g 2

Hi,
I have finished installing Oracle 10g 2 on a windows 2003 server. But no Listener windows service is not created. Any explanation ? Should I create the manually , How ?
Many thanks.

No, but I created one after installing Oracle , by
DBCA.
I'm going to apply RDBMS 5337014 patch to upgrade to
10.2.0.3. Should I create Listener before ?
Thank you.
Message was edited by:
user522961For applying patch actually you don't need listener, but it is best if you have a listener for client to connect, isn't it?
cheers
FZ

Similar Messages

My computer slows down and hangs after installing oracle 10g

My computer just slows down after installing oracle 10g. I have a pentium 4 3ghz with 512 memory (32 mb used by graphics built in card). It slows down and hanged even if I agjusted the swap memory to 800 mb. I have two swap file/page file - in drive c and drive d. I even cannot shut it down because it takes maybe 30 minutes just to see the "shut-off/log-off" screen.

Before starting up Oracle, when you go to the task manager, how much RAM does it show actually free? 512 MB is pretty small to run Oracle in the first place-- Windows and Office can use a fair chunk of RAM themselves, depending on which Office apps you are running. You may also be suprised by the amount of RAM that a web browser, email client, and the various other apps that folks generally install can use.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

After installing oracle 10g on linux im getting this error

Hi,
Can any one give me any solution on i getting an error after installing oracle 10g on linux.
ERROR:-
/oraeng/app/oracle/product/10.2.0/bin/clscfg: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
Failed to initialize Oracle Cluster Registry for cluster

Hi, please ensure that both 'libclntsh.so.10.1' and 'libttsh10.so' has 755 permission and owned by Oracle.
That is the critical step.
After re-execute the root.sh file
Has been known to reset the permissions from the previous step - bug in some patch releases.
Suggest OP records permissions for those two files before running root.sh Or run root.sh before setting the permissions.

Repeated ORA-12547 Messages after installing Oracle 10g

Hi,
I installed Oracle 10g on a Redhat ES 3 box, and the install went okay, but when I try and interact with the server I get the message:
ORA-12547: TNS: lost contact
For example, if I use the Database Configuration Assistant to attempt to create a database, I will see the above message when it begins the database creation process, or if I try to interact with the Oracle server using sqlplus I will see the above message after each command entered.
I had recently tried to install Oracle 8.1.7 on the same box, but abandoned that after deciding that the effort required to link Oracle 8 on RHES3 just wasn't worth it. I have been told that this previous partial installation may be the cause of the problem, and have been advised to uninstall Oracle 8, uninstall Oracle 10g, and reinstall Oracle 10g. I find it hard to believe that it would require such an action to solve this problem. Is there any configuration changes I can make to resolve it? Also, what does this message actually mean?
I am new to Oracle, so thanks for any help with this problem.
Colm.

My last message asking for a grater degree of specificity was not overly specific, hence I am posting the kernel parms that I have set with the hopes that you will spot one that I set improperly or one that I neglected to set.
[root@awyr ~]# cat /proc/sys/kernel/shmmax
2147483648
[root@awyr ~]# cat /proc/sys/kernel/shmmni
4096
[root@awyr ~]# cat /proc/sys/kernel/shmall
2097152
[root@awyr ~]# ipcs -lm |grep "min seg size"
min seg size (bytes) = 1
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $1}'
250
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $2}'
32000
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $3}'
100
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $4}'
128
[root@awyr ~]# cat /proc/sys/fs/file-max
65536
[root@awyr ~]# cat /proc/sys/net/ipv4/ip_local_port_range
1024 65000
[oracle@awyr Desktop]$ ulimit -n
63536
[oracle@awyr Desktop]$ ulimit -u
4091
[oracle@awyr Desktop]$ ulimit -a
core file size (blocks, -c) 0
data seg size (kbytes, -d) unlimited
file size (blocks, -f) unlimited
max locked memory (kbytes, -l) 32
max memory size (kbytes, -m) unlimited
open files (-n) 63536
pipe size (512 bytes, -p) 8
stack size (kbytes, -s) 8192
cpu time (seconds, -t) unlimited
max user processes (-u) 4091
virtual memory (kbytes, -v) unlimited
from sysctl -a
my fs.file-max = 65536
in my limits.conf I added:
oracle soft nofile 4096
oracle hard nofile 63536
in my (1) /etc/pam.d/system-auth (2) /etc/pam.d/sshd (3) /etc/pam.d/su (4) /etc/pam.d/login
files I added:
session required pam_limits.so
and verified that it exists
in my limits.conf I added
oracle soft nproc 2047
oracle hard nproc 16384
my /etc/oratab has:
orcl:/usr/local/oracle/app/oracle/oracle/product/10.2.0/db_1:N
I tried to change the N at the end to a Y but to no avail
my /etc/oraInst.loc has:
inventory_loc=/usr/local/oracle/app/oracle/oraInventory
inst_group=oinstall
Thanks again for your atention
Richard

After install oracle 10g, enterprise manager web version, can not login

Hi Guru,
I have installed oracle 10g on windows xp pro sp2 successfully, can use sqlplus to connect to DB, but when using IE to login enterprise manager web version port 1158, it failed. The login page came out, but when I keyed in the right userid/password ie sysman/pwd1234, the login screen just refreshed, nothing happen. but if I purposely key in wrong userid or password, the message "invalid userid or password" comes out.
Another "interesting" thing is, I can login web version isqlplus successfully using the same userid/password. but can not connect to web version isqlplus/dba, even I use user sys, also can not login.
Need your urgent help to solve this problem.

Hi.
What does the log say?
From %ORACLE_HOME%\opmn\logs folder.
rgds
Kjell

Can't login after installing Oracle 10g on XP Service Pack 1

Hi, I am completely new to using oracle and cannot login after completing the install process. I followed the article:
http://www.suite101.com/article.cfm/oracle/115320/3
in order to install and unlock the relevant accounts (such as "SCOTT"). But I keep getting the following error message when attempting to login (at both the "http://myservername/em" and "http://myservername/isqlplus" urls):
ORA-01017: invalid username/password; logon denied
After a few of those errors I also get an understandable "account locked" error message.
Can anyone suggest fields for "username", "password" and "contact identifier" that might enable me to login?! And why can't I use the "Global Database Name" and password that I supplied during the installation process?
oh, and does it make a difference that I'm using "Parallels Desktop" to run windows from my mac?
Thanks very much for any help, because I really need to get this running quickly!

Open SQL*Plus ... all learning of Oracle should start at the SQL*Plus command line.
Assuming you are logged in to the operating system as the same user that installed the Oracle software on SQL*Plus in the Start -> Programs menu.
Under username type "/ as sysdba" without the double-quotes and leave the other two dialog box fields empty.
Now enter:
SQL> alter user scott account unlock identified by tiger;
SQL conn scott/tigerIf this works you need to proceed by getting a beginning Oracle book. The one's offered by Oracle Press are among the best for your level or preferably find a class personal mentor in your area.
Bookmark:
http://asktom.oracle.com
http://tahiti.oracle.com
http://www.psoug.org/library.html
But XP SP1? Why? SP2 is the minimum for a system with some level of security.
In the future always post a complete version number (3 decimal places) as well as, as you did, complete error messages. That will help you get good answers.

Not able to register with listener after installing oracle grid infrastrtcure in oracle 11gr2 on windows

Hi Guru's.
I am not able to get listener connectivity after installing Oracle 11gr2 Grid infrastructure on windows on vmware workstation. I register with static ip.
Even i recreated the listener and running the listener from Grid home.
The output what i am getting is :--
C:\> lsnrctl status
The listener support no services
Can you please help me out

C:\Users\Administrator>lsnrctl stop
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 26-NOV-2013 09:09:10
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
The command completed successfully
C:\Users\Administrator>lsnrctl start
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 26-NOV-2013 09:09:21
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Log messages written to c:\app\administrator\diag\tnslsnr\WIN-0P8BCA3R7V5\listener\alert\log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-0P8BCA3R7V5)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Start Date                26-NOV-2013 09:09:24
Uptime                    0 days 0 hr. 0 min. 4 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Log File         c:\app\administrator\diag\tnslsnr\WIN-0P8BCA3R7V5\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-0P8BCA3R7V5)(PORT=1521)))
The listener supports no services
The command completed successfully
C:\Users\Administrator>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 26-NOV-2013 09:09:31
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Start Date                26-NOV-2013 09:09:24
Uptime                    0 days 0 hr. 0 min. 8 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Log File         c:\app\administrator\diag\tnslsnr\WIN-0P8BCA3R7V5\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-0P8BCA3R7V5)(PORT=1521)))
The listener supports no services
The command completed successfully
C:\Users\Administrator>lsnrctl service
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 26-NOV-2013 09:13:10
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
Services Summary...
Service "+asm" has 1 instance(s).
Instance "+asm", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0 state:ready
         LOCAL SERVER
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0 state:ready
         LOCAL SERVER
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
    Handler(s):
      "D000" established:0 refused:0 current:0 max:1022 state:ready
         DISPATCHER <machine: WIN-0P8BCA3R7V5, pid: 2560>
         (ADDRESS=(PROTOCOL=tcp)(HOST=WIN-0P8BCA3R7V5)(PORT=49246))
The command completed successfully

Error while installing Oracle 10g on Solaris 9 x86

Hi all,
I got several error after install oracle 10g. After I run the root.sh. It prompt :
Starting Oracle CSS service under init(1M)
Expecting the CRS daemons to be up within 120 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
and when I start sqlplus, it prompt:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Intel SVR4 UNIX Error: 2: No such file or directory
and following the error message prompt every minutes.
"oracle: (Oracle CSSD will be run out of init)"
"root: Failure in CSS initialization opening OCR."
I don't think reinstall oracle will solve my problem if I don't figure out what going wrong. Could anyone tell me what I need to do? Thanks very much for helping.
Cheers,
Alex

Check also if the t-bit is set:
[root@vtl1g121 ~]# ls -dl /tmp
drwxrwxrwt 11 root root 4096 Apr 10 11:44 /tmp
This is needed to mark the filesystem/directory as temporary.
Sometimes this can cause such problems also
Command: chmod +t /tmp

Can't install oracle 10g on solaris v10 X86!!!

Hi everybody, I got error messages below:
====================================================
$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.6, 5.7, 5.8 or 5.9. Actual 5.10
Failed <<<<
=====================================================
Does that mean there is not Oracle 10g for Solairs 10 X86?
Where can I find Oracle 9i for Solairs x86?
Thanks advance!

10g on Solaris 10 needs special handling:
1. Execute runInstaller with the -ignoreSysPrereqs option.
2. Select 'Do not create a starter database' when installing Oracle 10g.
3. During installation, the warning message 'SUNWsprox package not installed' can be ignored. Press Continue to resume the installation.
4. Download and install patch 4186426 from metalink.oracle.com after installing Oracle 10g software.
5. If you have an End User Solaris 10 distribution, install the SUNWuiu8 package prior to installing the 10g client.

I HAVE INSTALLED ORACLE 10G BUT FORGOT THE ADMIN PASSWORD.

DEAR FRIENDS,AFTER INSTALLING ORACLE 10G EXPRESS EDITION APPLICATION I FORGOT THE PASSWORD. IS THERE ANY WAY TO RECOVER THAT PASSWORD OR ELSE SHOULD I RE INSTALL ONCE AGAIN.......................?

user12110193 wrote:
DEAR FRIENDS,AFTER INSTALLING ORACLE 10G EXPRESS EDITION APPLICATION I FORGOT THE PASSWORD. IS THERE ANY WAY TO RECOVER THAT PASSWORD OR ELSE SHOULD I RE INSTALL ONCE AGAIN.......................?YOU DO NOT NEED TO SHOUT.
Log on as the internal user (sys) from the local machine. Usually
sqlplus / as sysdba
will do the trick. And then you can change the passwords using the standard 'ALTER USER SYS IDENTIFIED Y newpass;' command.
This is a fairly common question - a quick network search could have saved you a frustrating and anxious wait.

Installing Oracle 10G Express Edition on Linux after installing Libaio-0.3

I had got a error while installing 10G Express Edition on Redhat Fedora core 4 linux after installing libaio-0.3.104-2.i386.rpm
I had given the following command in Linux Command prompt to install the oracle database 10 G Express Edition (oracle-xe-10.2.0.1-1.0.i386.rpm)
# sudo rpm -ivh /tmp/oracle-xe-10.2.0.1-1.0.i386.rpm
The error I had got is as follows:
Preparing.....#####################[100%]
1:oracle-xe Warning:/etc/init.d/oracle-xe saved as /etc/init.d/oracle-xe.rpmorig
error:Unpacking of archive failed on file /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/ons;4698950F:cpio:MD5 Sum Mismatch

The steps I am asking is for installing oracle 10G express edition on Redhat Fedora core 4 Linux version. Now, after downloading the fresh copy of Oracle 10G express edition from the Oracle site. I have successfully installed oracle now.
I was getting the following errors - I have pasted previous query for the problem which I had faced after installing Oracle 10 G Express Edition successfully on Redhat Fedora Core 4 Linux.
The Previous Query is as follows:
Thanks For Guiding Me All of you!
Finally, I have installed Oracle 10G Express Edition on Redhat Fedora core 4 Linux.
Now, I am having the following problems:
After making the changes as per my Reference mentioned in my different messages, I had done the troubleshooting steps going to Options and setting the same.
1.When I try to load the http://127.0.0.1:8080/apex page it gives an error popup:
" The connection was refused when attempting to contact 127.0.0.1:8080 "
2. After opening the Run the SQL Command Line by clicking on applications and When I say " Connect System and when prompted for password, I have entered the password and gives another error as follows:
ORA-01034 : Oracle not available
ORA-27101: Shared Memory realm does not exist
Linux Error:2:No such file or directory
3. When I try to manually start the Listener or Services, It gives one more error:
Root Not a Member of DBA Group
I need to What is happening or What is the Problem and How will I rectify them?

[Solaris] rebooting in installing Oracle 10g R2 after Clusterware install

Hi..
Currently I am practicing the configuration of Oracle 10g R2 RAC (Solaris x86-64) with a Clusterware 10g on VMware
With the installation of Oracle Clusterware 10g software, there's no problem and look like working well on both nodes.
But, whenever I try installing the Oracle 10g R2 with 'install the software only' option, I got unstoppable rebooting
problem on the first node, rac1.
I tried both installation mode: OUI-typed and Silent approaches. Nothing worked!!
I wanted to figure out why this problem happened, but so far I did not have any bright answer for this. I looked in
the log and error files from /u01/app/oracle/oraInventory/logs, but there's no good answer or hint to resolve the
problem I have now.
Until now I tried 4 times of installations, but all stopped and were automatically rebooted at the same point with
almost 3% copying of software. I found some of trainers are having same problem I have now.
oracle@rac1 ~ $ crs_stat -t
Name           Type           Target    State     Host
ora.rac1.gsd   application    ONLINE    ONLINE    rac1
ora.rac1.ons   application    ONLINE    ONLINE    rac1
ora.rac1.vip   application    ONLINE    ONLINE    rac1
ora.rac2.gsd   application    ONLINE    ONLINE    rac2
ora.rac2.ons   application    ONLINE    ONLINE    rac2
ora.rac2.vip   application    ONLINE    ONLINE    rac2
This happens whenever I install the Oracle 10g R2 software.
Is there any unknown or hidden problem regarding CRS or something else?
Anybody has some hints or solution to this problem? If so, please let me have it ASAP.
Thank you so much.

I have gone through similar problem when installing oracle 10g in linux. You should follow the oracle installation documentation and make sure that all required OS patches and packages must be installed before starting the oracle installation. In my installation few OS packages was missing in the oracle documentation too and searching over the net solved the problem. I have installed few extra OS packages (RPM) and installed oracle successfully.
Regards
Asif Kabir

Error while installing oracle 10g in redhat Server

Hi experts,
I installed Oracle 10g in RedHat Linux server. After the installation Oracle will work smoothly. After restarting the server we try to start the listener service manually but it is not starting. I configured listener.ora file using GUI interface and also set Oracle HOME and Oracle SID. But still it’s not starting.
when Try to start the listener the following error comes.
Tns-12537:TNS:Connection closed
Tns-12560:TNS:PROTOCOL ADAPTER ERROR
Tns-00507:TNS:Connection closed
Linux error 29:illegal Seek.
Please help me

Thanks for the answer it was helpful and i successfully started the oracle database.
and i am trying to import dump file to tha database by creating the new schema when i try this i used the command like
imp userid=username/password@servicename file=C:\filename.dmp fromuser=username touser=username but i got error as no such command.pls help

ORA-12154 while installing Oracle 10g on windows 7

Hi,
I am trying to install Oracle 10g express edition on my machine (core 2 duo 2.93) running on Windows 7.
The installation moves on perfectly for the 1st step and while running the 2nd step (Net configuration Assistant), it gives the ORA-12154 error.
The contents of my configuration files at this point are as follows:
Listener.ora
=============
SID_LIST_ORCL =
(SID_LIST =
(SID_DESC =
(SID_NAME = ORCL)
(ORACLE_HOME = F:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
ORCL =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
=============
And that of tnsnames.ora is:
=============
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ORCL)
=============
After some googling around, I have found and installed the Microsoft Loopback adapter too (since my LAN is DHCP enabled) and also tried to turn on the firewall on my machine to check if it is not a problem with the port 1521 being blocked by the firewall.
However, even after all that I still get the error "ORA-12154: TNS:could not resolve the connect identifier specified." while running the Net configuration Assistant and/or running SQL Plus to connect to the SID - ORCL.
I can only see one service running in my services by the name : OracleOraDb10g_home1TNSListenerORCL
Any suggestions or advice on the error would be much welcome.
Is it anything related to Windows 7 ? Because I have managed to install using the same installer on another machine which runs Windows XP and everything seems fine there.
Thanking you all in anticipation.
Shreyas

user12753151 wrote:
Hmmm.. but then I'd have expected some installation error. I have read around that people have managed to install oracle on windows 7.
The error displayed seems to be indicating that there is some configuration or permissions issue.Check that the user has permission to write in the ORACLE_HOME\network\admin - UAC might be blocking that.
Install with software only, and run netca & dbca separately to create the database after the s/w install. (That's the way it is done in production anyway, so get used to it.)
But yes - you still may have problems. Those who did fake it out on Windows 7 usually understand what to do. If you are smart enough to actually do it, my hat is off to you.

Install oracle 10g on windows 2003 server issues

I am very new to oracle
I installed oracle 10g release 2 Enterprise Edition on a Win 2003 Server.
I got all oracle services running after install
But I can not connect to the database from another machine which is on the same domain
I set USE_SHARED_SOCKET =TRUE under HKEY_LOCAL_MACHINE/Software/Oracle/HOME
(as I learned from the forum)
I turned off windows firewall (or with the firewall turned on add port 1521 to Exceptions list) .
I restarted listener serivces and I even reboot the machine Still I can not connect to the database from another machine.
What am doing wrong here?
We are on a tight schedule now any help will be very appriciated.

Firewall-related problems normally throw ORA-12535, not ORA-12170 (the message a timeout occurred is the same). Description for this error is:
Error:     ORA-12170 (ORA-12170)
Text:     TNS:Connect timeout occurred
Cause:     The server shut down because connection establishment with a
     client failed to complete within the allotted time interval. This
     may be a result of network/system delays; or this may indicate
     that a malicious client is trying to cause a Denial of Service
     attack on the server.
Action:     If the error occurred because of a slow network/system,
     reconfigure the SQLNET.INBOUND_CONNECT_TIMEOUT parameter in
     sqlnet.ora to a larger value. If a malicious client is suspected,
     use the address in sqlnet.log to identify the source and restrict
     access. Note that logged addresses may not be reliable as they can
     be forged (e.g. in TCP/IP).
Hostname in listener.ora has a domain included, while in tnsnames.ora has not. Y Can you ping the host? Does tnsping work? To get more detailed informations you may turn on tracing on the client side (in sqlnet.ora) and the server sid (in listener.ora).
Werner

No Listener service after installing Oracle 10g 2

Similar Messages

Maybe you are looking for