No live preview of video in dock

can other leopard users confirm that videos minimized to the dock no longer continue to play, well sound plays but not the video, just displays last frame before minimizing.

Yea for some reason the video pauses and just the sound continues. That is disappointing I used to watch small videos while working.

Similar Messages

  • Is it possible to change live previews for video in Finder?

    I've just recently finished converting all my backed up movies to .m4v so that they would all show live previews in Finder (.avi's weren't working with that feature), however many of them are just black screens taken before the opening credits rather than anything from the movie itself. Is there any way to change what frame the live preview shows?

    Not sure what you mean by "live previews." The icon preview that the Finder displays instead of the generic filetype icon?
    In that case, you didn't need to convert your .avi movies to .m4v. Just install Perian (http://perian.org) and you'll be fine.
    Finder will only display one of the first frames of the movie as its file preview picture. No way of changing it per se.
    <Edited by Moderator>

  • Photobooth live preview gives No-Signal (Canon EOS 70D)

    I have a Canon 70D which is being used as a Photobooth. There is no software used. The Camera is connected to a LCD via HDMI for live view and the photos are clicked using a remote.
    The connection is good over HDMI and the photos are being clicked too. The problem is loss of HDMI signal. After clicking 5-6 photos, the LCD signal goes off and comes back only if the photo is clicked again or if we press the live preview switch on the camera. Sometimes, the signal looses after single shot also.
    I have checked the quality of the HDMI cable and it is very good. The camera and LCD are connected by Adapters and no battery is being used, so there is no chance of power being turned off.
    Please let me know what is the solution for this.
    Thanks,
    Girish

    Thanks for your EOS-70D camera info and videos. When is the camera available in North America?

  • I get a black capture screen (preview), but video captures fine.  What gives?

    I get a black capture screen when capturing with CS6 on a Windows 7 machine.  I'm capturing through Firewire from DV tape, via the VCR function of a Canon XL2 camera.  I have tried restarting, etc.; also toggled the "preview video" radio from the Settings button in the capture Window.  Nothing works and I need to be able to preview my video as I'm capturing.  It is not good enough that the video actually captures fine.  Also, I am forced to turn off Device Control in order to capture because it kicks me out of every capture (an immediate message of : "no frames captured") unless I do.  Please help.

    I'm not familiar with the process of rolling back to a previous update and I assume that is what you are suggesting?  It looks like I'm running 6.05.  Are you suggesting I roll all the way back to 6.00 past 6.04. 6.03, etc? And if I do roll back, does that mean I have to completely uninstall and reinstall CS6 first?  That would be a royal pain. 
    A little more updated info:  It's not just in attempting to capture from a DV tape that I get the black capture screen, but the live firewire signal is also black, though again it actaully captures just fine, I just cannot monitor the screen while doing it. 
    And it's definitely not something physical, like a bad firewire cable, because I also have the old 2.0 version of Premiere installed on the same machine so I tried an experiment:   I open CS6, then open the capture screen (which of course remains black).  So I close CS6 and open 2.0 and then open the capture window.  It too is black.  But if I restart my machine and open 2.0 without first opening CS6, and then open the capture window, the display is just fine.  So obviosuly some service from CS6 is remaining open when I close it and thus affecting 2.0.
    This problem is really starting to irritate me.

  • I want to create an external video widget with iAd. I followed the steps and copied the Url and paste it in the Video pop-up menu in the Properties section of the inspector. When i select 'preview' the video doesn't play and the Url that i pasted is gone.

    i want to create an external video widget with iAd to use in an iBook. I followed the steps and copied the Url and paste it in the Video pop-up menu in the Properties section of the inspector. When i select 'preview' the video doesn't play and the Url that i pasted is gone.
    hope someone can help!

    May have something to do with whether or not the URL can be reached while building your widget.  I've got a video on the web. When I enter the URL into the field for the video object and click to another field,  the URL is replaced with some text indicating that it is accessing the video then updates itself to displaying just the name of the video file.
    It shows just fine in preview and I can see the full path to the video when I export the widget so it should work for you. 
    Is the video accessible from your Mac while you're laying out your widget?
    -Mark

  • Elements 12 Organizer unable to preview .mts video files

    I am using Adobe Photoshop Elements 12 and Premiere Elements 12 on Windows 8.1. I have the newest version of Apple QuickTime (7.7.6) installed.
    I import .mts video files from my Panasonic Lumix DMC-GF1 for organizing along my still photos. I am absolutely certain that previewing the video files in Elements Organizer used to work fine at least before I upgraded from Elements 11 to 12. Maybe it also has been working in Elements 12, but I cannot tell for sure. Now, instead of a preview, I get the error 'The selected file cannot be played because your system does not have the required compressor/decompressor (codec) installed'. If I add one of these files to an Premiere Elements video project, however, the file plays nicely from the Premiere timeline.
    I have tried downgrading my Quick Time versions all the way down to 7.3, with no result.
    Does anyone have an idea what might be wrong?

    I am using Adobe Photoshop Elements 12 and Premiere Elements 12 on Windows 8.1. I have the newest version of Apple QuickTime (7.7.6) installed.
    I import .mts video files from my Panasonic Lumix DMC-GF1 for organizing along my still photos. I am absolutely certain that previewing the video files in Elements Organizer used to work fine at least before I upgraded from Elements 11 to 12. Maybe it also has been working in Elements 12, but I cannot tell for sure. Now, instead of a preview, I get the error 'The selected file cannot be played because your system does not have the required compressor/decompressor (codec) installed'. If I add one of these files to an Premiere Elements video project, however, the file plays nicely from the Premiere timeline.
    I have tried downgrading my Quick Time versions all the way down to 7.3, with no result.
    Does anyone have an idea what might be wrong?

  • I keep getting an internal server error when I try to load pages in live preview in edge code...

    I keep getting this message every time I try to laod a page using live preview in Edge Code with Google chrome...
    "The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log."
    I'm using google chrome Version 33.0.1750.152. I'm running mac osx 10.9.2. I've installed Apache.
    in the project settings I have this url... http://127.0.0.1/~spencer/butterville_website/
    I had this working flawlessly with an earlier version of a website I was working on. I haven't changed any settings, the only thing that has changed is that I'm working with a new sub folder in the root directory. Every time I try to load the page, I get that error message. I can't figure out what I'm doing wrong. Please help! Thanks.

    This query seems to be related to Edge Code. you can get help from this forum.
    Also EdgeCode doesn't have troubleshooting page but you can get help from Brackets trouble shooting page.

  • How do I properly set up Live Previewing (Brackets)

    I just recently came across Bracket and I am super excited about it and can't wait to dive in. My problem right out the gate is I can't for the life me configure the Live Previewing to work properly. That is why I am here. I have read
    Here is what I have done with my limited knowledge concerning setting up local hosting. ( I have always used Dreamweaver and never had to do this before)
    I downloaded MAMP to create a localhost, I moved my website folder and files into the MAMP htdocs folder and labeled it AWD. If I type in local host in my browser it pulls up INDEX of/ AWD/ (folder), if I click on the folder it downloads a blank file, and that is it.
    I have tried:
    file:///C:/MAMP/htdocs/AWD/ - File not supported needs to be http:// (if I type this into my browser the site shows)
    http://C:/MAMP/htdocs/AWD/ - This website is not available
    http://localhost/MAMP/htdocs/AWD/ - Not Found
    I found this on this Forum but can't make sense of the information.
    I look forward to any and all help! Thank you for your time!

    Hey Ryan,
    First off, thank you for your help, I appreciate it. To answer your question no both http://localhost:8080/AWD/ and http://localhost:8888/AWD/ do not work. If I type just localhost in my Chrome Browser it takes me to an INDEX of / page and has one directory listed AWD. When I click on the AWD it proceeds to download a blank file.
    One of the only things that has worked was typing file:///C:/MAMP/htdocs/AWD/ in my browser, which isn't supported in Brackets. I can type that in and it takes me to the overall AWD Directory and I can see all of my files. If I click on one of my PHP files it will show the page.

  • Drivers for Live! Cam Video IM Pro?

    Where can I find drivers for the Live! Cam Video IM Pro? It's not listed in the driver dropdown at http://us.creative.com/support/downloads/...

    Check again, the driver is available now ..... uploaded on 8 Jan 07.

  • Live! Cam Video IM Pro (VF0410) HELP!!!!

    i bought this webcam today - Live! Cam Video IM Pro (VF0410) - but i can't get it to show in black and white.
    Anybody who can help getting my webcam black and white?
    thank you!

    I too have the same problem. It seems to be a flaw with the software or the hardware. If you disable the auto exposure setting the frame rate will still site at 4-5 fps.
    If you then move the exposure slider to the far left and then back to the right the frame rate will immediatley increase to 20-30 fps, but the exposure is quite poor even with the adjustment of brightness, contrast, etc. Is this a software bug or a hardware flaw?

  • How do I live preview a Ruby on Rails/Ember application?

    I have a Ruby on Rails application and I am under the impression that Edge Code will work with locally hosted web servers to use live preview. I have set up the project settings to use the locally hosted address: http://localhost:3000/ ... However when I use Live Preview I receive the following error.
    "Open an HTML file or make sure there is an index.html file in your project in order to launch live preview."
    I have done so and I meet the criteria but it doesn't seem to work. Does Adobe Edge Code support this feature?

    What's the file extension of the page you want to view in Live Preview? You may need to add it to the internal (not yet easily configurable) list of file extensions.
    Randy

  • Live Preview Highlight is not working.

    I recently downloaded Edge Code to a new work computer and the Live Preview Highlight is not working.
    I have Edge Code installed on a personal computer, and it works great. The version I am using was downloaded about 6 months ago so I am not sure if they changed something with the most recent version. When I highlight a section within the html i.e. a table or row, it would highlight those same sections in the preview. However, this is not the case on my new computer.
    Anybody know whats up? Is it setting on Chrome that I need to change or is there some update that I am not aware of.

    I guess I assumed that you had Chrome setup to auto-update (like I have it). The only way Live Preview will work in a previous version of Edge Code is with an older version of Chrome.
    But there are other reason why Live Preview may not work in latest version of Edge Code. Take a look at Live Preview section of Troubleshooting Guide.
    Randy

  • Live-preview of .dwt template does not work

    Hi,
    I set up a html page in DW and converted it to a template using insert > template > convert (make) to template (I use the german version of DW, dont know whether this is the right translation). Now my file has an .dwt ending. After having inserted the {tag_pagecontent} I uploaded the file to the Templates folder of BC. Now I am working on the template, but live preview doesn't work. It says:
    The path is: mywebsite.business-catalyst.com/Templates/mainDesktop.dwt
    How can I use the live preview when working on a template?
    Regards, Citzwerth

    Hi Peter,
    Please copy/paste the problematic slide in a new responsive project and verify if the issue still exists in preview?
    If yes, can you please upload the new project to dropbox.com and email me the download link?
    Regards,
    Hari

  • Live Streaming from Video File

    Hi everyone,,, im newbie in programming streaming video with flash....ater reading documentations i tried the instructions on doc, i got a question that i've not been solved. How to make a "live streaming" from "video file". It likes a live streaming from camera but it uses video file  as the source.... many thanks

    Do you mean you have video file but you want to publish it as live stream , am i right? If yes following is the solution, but before that let me clarify you will need server to do it , i mean there is no way Flash client (i.e. .swf file running in Flash Player) can publish file from local disk.
    Now let me tell you how to do it from server:
    Place your video file under "streams" folder of your application i.e. say "myVideo.flv" under  <FMS root>/applications/myApp/streams/_definst_
    Now write following code in your main.asc file (this file would be under <FMS root>/applications/myApp )
    var mystream;
    application.onAppStart = function(){
         mystream = Stream.get("livestream");
         mystream.play("myVideo",0,-1,true);
    This will publish "myVideo" file as live stream under name of "livestream". Client would have to subscriber using NetStream and
    use ns.play("livestream",-1,-1)
    You might have to write some extra code if you want to loop same file else once play of recorded file gets over , live publish will automatically stop.
    let me know if this solves your problem

  • How do you preview the video effects?

    Hi,
    I am just wondering how to preview the video effects in Premiere Pro without having to add them to the timeline to view them. Anyone have any idea?
    Thanks in advance.
    Kerri

    Kerri,
    Much of where a Transition is positioned will depend on your Clips, themselves. Here's another topic for your "Autumn Reading List" - Handles.
    The understanding of these will go a very long way to understanding the placement and operation of Transitions.
    Here's a short bit on Handles, but the manual (if they still have those) and the Help files will give you a lot more info.
    Initially, Handles are a bit of an abstract concept, but once you get it, you'll fully understand some of the behavior of Transitions. Well worth reading.
    Good luck,
    Hunt

Maybe you are looking for