'No LiveCache anchor found'

Hi experts,
               While I am trying to load data to PB from Infocube, its not happened. It is throughing the error "No LiveCache anchor found".
My System configuration is below.
SCM5.0
SAP_BW     700     0012     SAPKW70012
SCM     500     0007     SAPKY50007
Pleasea help on this issue. very urgent.
Thanks,
Madhuri.

Hi Madhuri,
Please reinitialize you planning area again so if any new char-combos exits getting regenerated again & data can upload properly.
I ve faced simillar problems so may times.
Please let me know if you have any problems
Hrishikesh

Similar Messages

LiveCache anchor could not be found with the DP BOM

Hi Users,
I have a com error when trying to call up the child products in a planning book that is linked to a BOM POS.
I've chceked the CVC's and BOM information and this all appeard to be okay. I've created the TSO (without deleting the old one), run the consistency checks /SAPAPO/PSTRUCONS, /SAPAPO/TSCONS and /SAPAPO/OM17 but still no joy.
After running the consistency check for the TSO (with repair ticked) the are a lot of "No live cache anchors found" errors that don't get fixed. These appear to be all of the BOM products that error.
What other options do I have to create the livecache for these info objects. I'm REALLY stuck with this and would appreciate any help. I don't want to delete the TSO and loose data in livecache.
Thanks
Paul

Paul
Take a look at the SAP "Manage Demand Planning in SAP APO (3.x) / mySAP SCM (4.x, 5.0)" Best Practice for Solution Management document.
It says
Adapt Time Series for New Characteristic Combinations with report
/SAPAPO/TS_LCM_PLOB_DELTA_SYNC. For example, if you create a new characteristic
combination without the option 'Create time series objects' (see transaction /SAPAPO/MC62),
you get the error u201CNo liveCache anchor foundu201D when selecting this characteristic combination.
In this case, execute report /SAPAPO/TS_LCM_PLOB_DELTA_SYNC for the basis planning
object structure of the planning area. This creates the corresponding liveCache anchors and
liveCache time series for all planning areas that use this basis planning object structure and
for all versions of these planning areas for which time series objects already exist.
/SAPAPO/TS_REALIGNMENT cannot work without the liveCache anchors. So before
executing realignment (or if missing liveCache anchors are reported), run report
/SAPAPO/TS_LCM_PLOB_DELTA_SYNC. Mark the option display error log to get a log in
case of unsuccessful execution. See also SAP Notes 492399 and 573127.
If necessary, you can determine and repair inconsistencies for the planning area by executing
report /SAPAPO/TS_LCM_CONS_CHECK and choosing the Repair option (see Maintenance
of DP Data Storage Structures). For details, see SAP Note 402046.
In another section it also says
Delete Time Series and Time Bucket Profiles having no liveCache Anchors with report
/SAPAPO/TS_LCM_REORG. This report is supplied with SAP Note 542946, SP 22 (for APO
3.0), and SP 10 (for APO 3.1) u2013 see SAP Note 425825. The report determines all liveCache
time series and time buckets profiles from a selected planning version that do not have any
'liveCache anchors', independently of planning areas. These objects do not refer to the
application data so they are not inconsistent, but they are unnecessary and consume
liveCache memory. It may be sufficient to run the report approximately once a month.
If you have selected the 'Repair' option, any such unnecessary objects are deleted.
Caution: When you run report /SAPAPO/TS_LCM_REORG, no other processes for a
planning area with key figures based on liveCache time series should be allowed to run with
the same planning version. Otherwise, liveCache objects that are still required by the other
parallel process may be recognized as unnecessary and even deleted. For this reason, we
recommend that you always run the report with the option 'Lock planning version'. In this case,
all planning areas that use the planning version to be checked are locked for the relevant
version. If you cannot activate the lock, report execution is interrupted and a list of system
users is displayed, showing users who have already set a change lock for the planning
version.
I dont know if this helps. But might be worth a try.
Rishi Menon

What is Live Cache Anchor

Hi ,
Some times we see errors like "No Live Cache Anchor Found". Can somebody tell me in detail that what is a live cache anchor and why this inconsistency occurs. Is there a link containing detailed documentation?
Best Regards,
Chandan Dubey

Dear Chandan,
This error message "No Live Cache Anchor Found" states that for one or even for several characteristics combinations (see Transaction /SAPAPO/MC62) a so-called LiveCache anchor does not exist.In this case, a LiveCache anchor is a pointer to one or several time series in the LiveCache.
There is one LiveCache anchor per planning area, characteristics combination (planning object) and model (model belonging to the planning version, see transaction /SAPAPO/MVM). If for one planning area, time series objects were created for several versions with different models, that means several LiveCache anchors exist for the same planning area and for the same characteristics combination.If you created time series objects for several versions of the same model, that means one LiveCache anchor
points to several time series in the LiveCache.
If there is no LiveCache anchor for a planning area, a model and a characteristics combination, this also means that no respective time series exists in the LiveCache and thus, this characteristics combination cannot be used for the planning with this planning area for all versions of the model.If this state occured for a certain characteristics combination, the above-mentioned error message occurs if either exactly this characteristics combination is selected or if a selection contains this characteristics combination.
Possible causes and solutions:
- Time series objects have not yet been created for the selected version.
Solution: Create time series objects (see documentation)
- You are using a planning session with version assignment.For the version that was acutally selected, the time series objects were created, however, this is not the case for the assigned version.
Solution:Create time series objects for the assigned version.
- New characteristics combinations were created without the 'Create time series ob' option (see Transaction /SAPAPO/MC62).
Solution:Execute the report /SAPAPO/TS_LCM_PLOB_DELTA_SYNC for the basis planning object structure of the planning area.This will create the corresponding LiveCache anchors and LiveCache time series for all planning areas that used these basis planning object structure and for all versions of these planning areas for which time series objects already exist.
If none of these possible solutions is successful, you can use report /SAPAPO/TS_LCM_CONS_CHECK to determine and correct the inconsistencies for a planning area ('Repair' option).
I hope this helps.
Regards,
Tibor

CS5: Hyperlink to text anchor from character style?

Is it possible to script the following:
A text has several occurances of the same string, e.g. 'A10'. One is marked with a character style 'Anchor' and the others are marked with a character style 'Link'. The idea is to create text anchors from the 'Anchor' style and then find every occurrence of the character style 'Link' and create a hyperlink to the matching anchor.
I've managed to find a script that creates text anchors from a character style 'Anchor'. Can someone offer some suggestions on how to do script creating the links?
// Written by Kasyan Servetsky
// March 13, 2011
// http://www.kasyan.ho.com.ua
// e-mail: [email protected]
//======================================================================================== =================================
if (app.documents.length == 0) ErrorExit("Please open a document and try again.");
const gScriptName = "Create Text Anchors";
const gScriptVersion = "1.0";
var gDoc = app.activeDocument;
if (!gDoc.characterStyles.item("Anchor").isValid) ErrorExit("Character style \"Anchor\" doesn't exist.");
CreateDestinations();
//======================================================== FUNCTIONS =====================================================
function CreateDestinations() {
    app.findGrepPreferences = app.changeGrepPreferences = NothingEnum.nothing;
    app.findGrepPreferences.findWhat = ".+";
    app.findGrepPreferences.appliedCharacterStyle = gDoc.characterStyles.item("Anchor");
    var finds = gDoc.findGrep();
    var destCounter = 0;
    for ( var j = finds.length-1; j >= 0; j-- ) {
        var found = finds[j];
        try {
            if (!gDoc.hyperlinkTextDestinations.itemByName(found.contents).isValid) {
                var hypTextDest = gDoc.hyperlinkTextDestinations.add(found);
                hypTextDest.name = found.contents;
                destCounter++;
        catch(e) {}
    if (destCounter == 0) {
        alert("No text anchors have been created.", gScriptName + " - " + gScriptVersion);
    else if (destCounter == 1) {
        alert("One text anchor has been created.", gScriptName + " - " + gScriptVersion);
    else if (destCounter > 1) {
        alert(destCounter + " text anchors have been created.", gScriptName + " - " + gScriptVersion);
function ErrorExit(error, icon) {
    alert(error, gScriptName + " - " + gScriptVersion, icon);
    exit();

Hi,
The way is:
create hyperlinkTextDestination;
create hyperlinkTextSources;
create hyperlinks using one destination and various sources;
so:
// to create hyperlinks alike:    one destination==>many sources
// destination is the 1st occurrence of text with charStyle "anchor" applied
// sources are each occurrences of text with charStyle "link" applied
var mDoc = app.activeDocument;
app.findTextPreferences = app.changeTextPreferences = NothingEnum.nothing;
app.findTextPreferences.appliedCharacterStyle = mDoc.characterStyles.item("anchor");
var
     mAnchor = mDoc.findText()[0],
     mDest;
if (mAnchor) mDest = mDoc.hyperlinkTextDestinations.add(mAnchor,{name: mAnchor.words[0].contents});
else {alert ("no anchor found"); exit(); }
app.findTextPreferences.appliedCharacterStyle = mDoc.characterStyles.item("link");
var
     mSource = mDoc.findText(),
     len = mSource.length,
     currSource, currHyper;
if (!len) {alert ("no link found"); exit(); }
while (len-->0) {
     currSource = mDoc.hyperlinkTextSources.add(mSource[len],{name: "sourceLink_" + len});
     currHyper = mDoc.hyperlinks.add(currSource, mDest, {name: "mHyperlink_" + mDest.name + "_" + len});
app.findTextPreferences = app.changeTextPreferences = NothingEnum.nothing;
Jarek

Live Cache anchor

what is the livecache anchor ? can any one explain in details how it works?
thanks &regards
ravi

Hello,
1)
"Report /SAPAPO/DELETE_LC_ANCHORS must be executed every time after liveCache is initialized. This report ensures the integrity of the APO DB and liveCache data"
It's wrong statement.
For example, the liveCache will be initialized during the version update, when you are using the LCUPDATE tool from the liveCache upgrade CD, but the Report /SAPAPO/DELETE_LC_ANCHORS
should NOT run during the system upgrade. You should NOT run the /SAPAPO/DELETE_LC_ANCHORS program during upload/download procedure (for details, see Note 632357) and when you upgrade to a higher SCM release, since otherwise a loss of data occurs.
Also please pay attention to the SAP note :: 640107 Using program /sapapo/delete_lc_anchors in APO 3.0 or higher.
In the SAP note 640107 is written about steps performed by /sapapo/delete_lc_anchors report.
As it was written in the note, that the /sapapo/delete_lc_anchors program has to be called automatically after the liveCache is initialized in LC10 transaction, if it's required. Therefore, you must NOT call the /sapapo/delete_lc_anchors program manually again using transaction LC10 after the liveCache has been initialized.
2)
For SAP liveCache documentation see the SAP note 767598 .
Before to run or recommend the liveCache initialization in LC10 please read the SAP note 640107 <!! > & the SAP document "Checklist for Initialization of SAP APO liveCache" at service.sap.com/scm -> Technology
-> Information on SCM 4.1 and prior releases
Information on SCM 4.1 and prior releases you will find here. < click on here > -> Backup and Recovery
3)
There are tables in the APO-database which contain references to liveCache-objects. The tables having references to liveCache-objects are called anchor-tables.
Thank you and best regards, Natalia Khlopina

Key figure description for key figure YKFRFCFGD does not exist in liveCache

Dear SAP Gurus,
We have upgraded our APO 3.10 to SCM 5.1,
Sopport Pack details:
SAP_BASIS 700 16
SAP_ABA 700 16
ST-PI 2005_1_700 6
PI_BASIS2006_1_700 6
SAP_BW 700 18
SAP_AP 700 13
LCAPPS 2006_700 4
EA-IPPE 400 13
SCEMSRV 510 7
SCM 510 6
SCMBPLUS 510 6
SCMEWM 510 6
SCMSNC 510 6
SCM_BASIS 510 9
BI_CONT 703 10
QIE 200 5
ST-A/PI 01K_SCM500 0
and Live cache 7.4.02.29 from to 7.7.03.23
We facing following issue during APO operation in live cache.
Error details:
"Characteristic combinations with liveCache anchor but without time series"
"Key figure description for key figure YKFRFCFGD does not exist in liveCache"
"There is an inconsisteny between the key figure descriptions in liveCache and in the database. The key figure description of key figure YKFRFCFGD exists in the database but not in liveCache."
Kindly help me out on this.

Please execute Live cache consistecny check:
for Planning area , check all the option.
/SAPAPO/TS_LCM_CONS_CHECK
MPOS:
/SAPAPO/TS_PSTRU_CONS_CHECK
Manish

Inconsistent state: No. of charctstc combinations - no. of LC anchors     /SA

Hi,
We have recently upgraded from SCM 4.0 to 5.0 and while loading one of the SNP data sources into BW(3.5), I have received following error message.
The extraction into BW fails although, it runs smoothly in RSA3 on APO side for the same data source.
Is there any setting on APO side which can prevent following error?
Inconsistent state: No. of charctstc combinations <-> no. of LC anchors
Diagnosis
     The sequence for creating time series in LiveCache is:
     1. Characteristic value combinations are created which in turn create
         planning object in the system
     2. The combination of version, planning area, and planning object is
         initialized, creating time series in LiveCache. This combination is
         so to speak the LiveCache anchor.
     This error occurs if
     o   New characteristic value combinatons have been created for the
         master palnning object structure that is assigned to the planning
         area, but the time series objects were not created.
System response
    Processing cannot continue.
Procedure
    There are two methods of creating time series objects for individual
    characteristic value combinations:
        a) Re-initialize the version without deleting the time series
            objects beforehand.
        b) Execute the report program /SAPAPO/TS_LCM_PLOB_DELTA_SYNC.
    In general SAP recommend that when you generate new characteristic value
    combinations, you set the Create time series objects indicator. This
    prevents this error from occurring.

Carry out following three steps:
1. Intialise the Planning area.
2. Run the following report with repair mode:
/SAPAPO/TS_LCM_CONS_CHECK
3. Run the following report with repair mode:
/SAPAPO/TS_LCM_REORG
This should solve your problem.
Regards,
Manoj

Forecast Upload into DP

Hi-
we have uploaded forecast into dp using the APO-BW functionality. also have created the CVC. but then the data is not showing up on in the planning book for DP. it says livecache anchor not found. could anyone enlighten us on as to why this error is popping up. We might be missing out a step or two so we will appreciate it if someone could guide us.
Thank you

Hi there
If you did not tick the "create time series objects" option, run the report /SAPAPO/TS_LCM_PLOB_DELTA_SYNC for your planning object structure, this should correct the livecache anchors for you and generate time series for all planning areas that use that Plobj.
Mark the option display error log to get a log in
case of unsuccessful execution.
Regards
Ian

Data realignment

Dear experts
I have encountered error messages during data realignment. The error messages are:
1. Multi-level error propagation carried out
2. Realignment of liveCache time series aborted
I've run the Consistency Check for the Time Series Network(/SAPAPO/TS_LM_CONS_CHECK) and consistency check for Planning Object Structure(/SAPAPO/TS_PSTRU_CONS_CHECK).
On the first time these were run, there were inconsistencies found with the livecache anchor - there were wrong and duplicate CVCs. These CVCs have already been corrected and consistency checks are already error-free.
Upon execution of the realignment again, the same error messages are still encountered. Please help. What needs to be checked for realignment to be sucessful?
Thanks.

Hi,
I am assuming that you have maintained the Realignment table properly meaning you have only the necessary entries and removed all unwanted entries. Having assumed that the other reason why this error can come up is when you try to realign more than 1 Characteristic Value in the same table entry.
For Example.
Let us you have 3 Characterstics viz, product, location,customer.
If for Product P1, you are trying to change the location from L1 to L2 and customer from C1 to C2 then there is a possibility such an error might occure.
In such cases we need to create 2 entries as follows
1) P1 L1 C1 to P1 L2 C1
2) P1 L2 C1 to P1 L2 C2.
It is better to avoid Multiple characteristic changes in a single step.
Thanks
Mani

Error occurred in the source system

Hi,
I am receiving the below error while loading data from APO system
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
******On further investigating the error message I get the following Diagnosis and Resolution details.*****
Diagnosis
    The sequence for creating time series in LiveCache is:
    1. Characteristic value combinations are created which in turn create
        planning object in the system
    2. The combination of version, planning area, and planning object is
        initialized, creating time series in LiveCache. This combination is
        so to speak the LiveCache anchor.
    This error occurs if
    o   New characteristic value combinatons have been created for the
        master palnning object structure that is assigned to the planning
        area, but the time series objects were not created.
System response
     Processing cannot continue.
Procedure
     There are two methods of creating time series objects for individual
     characteristic value combinations:
         a) Re-initialize the version without deleting the time series
             objects beforehand.
         b) Execute the report program /SAPAPO/TS_LCM_PLOB_DELTA_SYNC.
     In general SAP recommend that when you generate new characteristic value
     combinations, you set the Create time series objects indicator. This
     prevents this error from occurring.
Please let me know what I need to do to rectify this error. Please send me the steps to overcome this error.
Regards,
Tyson

Hi tyson,
Has it run good before? if yes, try to restore the source system.
by right click on the source system then choose restore.
It will require you to fill in some information about RFC destination. contact with your basis to have the information about: Target host, Sys no, and Sys ID of your APO system.
hope it help. Give point if you see its helpful.
Chuong Hoang

In which table is the Live cache data stored?

Hi experts,
I am new APO .Can anyone let me know in which database table will the Live cache data be stored?
Thanks in advance
regards
Ashwin.

Hello Ashwin,
the idea of the liveCache is to haev data permanently and quickly available without having to read/write from/to database. Therefore, the liveCache is <b>NOT</b> a physical database, it is a program in C++ that <i>simulates</i> a database and holds the data in the memory.
However, it does need so called liveCache-anchors which are saved on the database, and which are similar to pointers.
However, you can extract data from liveCache using BADIs or by creating a datasource on a planning area (for DP and SNP), manipulation can also be done only by BADIs or sophisticated programming (which basically uses RFCs).
I hope this answers your question.
Regards,
Klaus

APO-DP - Realignment termination

We are on APO 5.0. In DP realignment has been terminating consistently with message "No Live Cache Anchor Found". I have confirmed that the CVC exists, all the consistency checks on planning area and planning object structure have passed.
Has anybody come across similar situation?
Thank you.

Hi Anir,
Try to execute the /SAPAPO/TS_LCM_CONS_CHECK program and check is there inconsistencies.
Regards,
Siva.

Invalid Data Status while loading data in planning book

Hi,
Recently i got the error message "Invalid Data Status - Error reading data - planning book cannot be processed further ". I was able to resolve that issue by running program /SAPAPO/TS_LCM_CONS_CHECK with options Repair and check Livecache anchor. Now Here is my question, i want to know why does the livecache anchor error occurred. What steps can i take in future to avoid this error?
Regards
Kartik

Kartik,
I couldn't say. In all the years I have been using SCM, I have never been able to prevent all such errors from occurring, I have only been able to solve certain problems only under certain specific instances. Usually, the 'solvable; problems I have seen are a result of poorly written enhancments or custom programs.
One might speculate that the reason SAP provides these repair programs (yes, there are MANY inconsistency-repair type programs) because they believe that such errors are inevitable.
Maybe you would be better served by just running such programs periocically in batch, as recommended by SAP.
http://service.sap.com/~sapidb/011000358700000955412003E
Best Regards,
DB49

Error message: Page Anchor not found: 188 when exporting to ePub

I have been working on exporting a book from InDesign CC 2014 to reflowable ePub format. The book is about 250 pages long with numerous photographs, all of which are anchored objects. I am now able to export a good-looking ePub file, but I keep getting just this one error message, Page Anchor not found: 188, followed by the pathname for the file. I don't see a problem at page 188, but I'm not very experienced with InDesign. I have done several searches, and I'm not sure exactly what a "page anchor" is. Can anyone help me figure this out? Can I just ignore this error. Thanks.

I had similar problems which were resolved when I anchored images only within text with styles that would not be included in the TOC, and also made sure there were no blank paragraphs (unnecessary hard returns) with a style that would be included in the TOC. Hope that helps.

Specified anchor not found in the model in SAP Records Management

Hi Experts,
We are on SRM 7.0 SP 8 PPS with ECC 6.0 Ehp 4 with RM.
I have managed to Integrate SRM with RM with some issues.
The issues are:
RFx with attachment is not displayed in RM through related links.
Whereas RFx without attachments are visible.
Contract and PO with attachment are also visible in RM.
The only piece remaining is the RFx with attachments:
Errors in SLG1 RM client are:
Source: CL_SRM_POID===================CP , CL_SRM_POID===================CM012 ,        28
Message no. SRM_REGISTRY151
Invalid Service Provider Space ID
CL_SRM_POID_DIRECTORY=========CP , CL_SRM_POID_DIRECTORY=========CM001 ,        56
Message no. SRM_REGISTRY151
The interface reference transferred for the POID object is invalid
Message no. BL001
Source: CL_SRM_SP_RECORD==============CP , CL_SRM_SP_RECORD==============CM00J ,        12
Message no. SRM_REGISTRY151
Back End: Anchor Not Found
Message no. BL001
Error during Records Management update for SRM/EBP element Object ID: 4000000700 Logical System: LS_SRD600 Processing mode: CREATE
Message no. /SAPPSPRO/RM_UPD_ERR000
Error with creation of an attachment POID. SPS ID
Message no. /SAPPSPRO/RM_UPD_ERR017
Could not add elements to record
Message no. /SAPPSPRO/RM_UPD_ERR006
Could not update POID relationship directory
Message no. /SAPPSPRO/RM_UPD_ERR007
The SRMCALLMON XML errors are:
Application Error:
SRM_GENERIC_SP</ID>    <NUMBER>820</NUMBER>
<MESSAGE>An internal error has occurred -- check application log</MESSAGE>
SRM_GENERIC_SP</ID>   <NUMBER>812</NUMBER>
<MESSAGE>Specified anchor not found in the model
This is happening only to RFx with attachments. If i save an RFx without attachment, then its displayed in RM. If i add attachments later to the RFx still its not displayed in RM.
Kindly help me out, Gurus.
with regards,
Freemindmind.

anybody?

'No LiveCache anchor found'

Similar Messages

Maybe you are looking for