No log was created for object SDOK and sub-objekt QUEUEING

Hi All,
I am getting the error "No log was created for object SDOK and sub-objekt QUEUEING " while uploading the document.
Error is triggered at the call of Function Module:
  CALL FUNCTION 'SDOK_PHIO_STORE_CONTENT'
Kindly help with the solution.
thanks,
Arti.

Hi Arti,
Kindly take help from abap and resolve by following manner:
Check sap note 1173675 and error 26296.
Check entries and make the entries in table SDOKPROP.
I hope this will resolve the query.
Regards,
Ravindra

Similar Messages

  • I have two iTunes accounts. One was set up for my iPhone; the second was created for my iPad. I just updated my iPhone and it linked my to my second iTunes account instead of y primary. How can I change it back to my primary account?

    I have two iTunes accounts. One was set up for my iPhone; the second was created for my iPad. I just updated my iPhone and it linked my to my second iTunes account instead of my primary account. How can I change it back to my primary account?

    Hey bjboles,
    Welcome to Apple Support Communities.
    The article linked below describes what to do after changing your Apple ID, but you can use it as a guide to resolve the incorrect Apple ID account information entered issue that you described.
    Apple ID: What to do after you change your Apple ID - Apple Support
    Ciao, 
    -Jason

  • No archive information found for object type  and document type

    Hi All,
    When i try to view the print preview for a perticular doc type, system is giving the error as "No archive information found for object type  and document type"
    Diagnosis
        No information was found about optical archiving. This may be due to
        either of the following reasons:
        1.  No valid archiving parameters were passed
        2.  Your system is not configured for optical archiving
    System Response
        Processing is cancelled.
    Procedure
        Specify valid archiving parameters or check whether your system is configured for optical archiving
    Regds,
    CB

    Hello,
    You are trying to Print & also archive by selecting the option Print & Archive.
    You have to do archivelink configurations and then create document type and assign to the object type with content repository with archivelink table.
    If you want to archive the spool or output then you have to use object type as DRAW. If you are archiving invoice document or letters or so on then you have to know the object type/Business object of the transaction.
    Please note that for archivelink configuration, attachment will be either stored in archive server or in SAP database table based on business requirement.
    Hope this will give you some understanding on archiving area.
    -Thanks,
    Ajay

  • Cannot view workflow log via Services for Object Workflow Overview

    We recently had an upgrade of R3/ECC and discovered a new issue.  For some reason we can no longer view workflow log via Services for Object > Workflow Overview for Material Master (transaction MM03).  We get the message "There are no workflows that have already worked with this object".  However, we have confirmed via SWEL and other t-codes that the workflow and log do exist.  This seems to be the only object we have this issue for after the upgrade.
    Anyone know what issue is and how to fix?   Or at least path to config in SPRO for "generic object services" where we can see if anything changed via upgrade for this object?
    Thanks,
    Matt
    Edited by: Matthew Huth on Apr 22, 2008 9:23 PM

    Found the solution.  See OSS note 553246.  This has been tested and works for us.   -Matt
    Note 553246
    Summary
    Symptom
    In the material master, the system no longer displays the attachments for the material or workflow items in the Generic Object Services.
    Other terms
    MM01, MM02, MM03
    Reason and Prerequisites
    As of Release 4.6B, business object BUS1001006 is valid for the material master. Until you have implemented Note 452424, the Generic Object Services is still published for the old BUS1001 business object. After implementing the note, all attachments, relationships, notes and workflow items that are assigned to business object BUS1001 are no longer displayed.
    Instead, all new attachments are assigned to business object BUS1001006. As a result, attachments cannot exist for both systems.
    For workflow items, the assignment to the business object occurs in the respective tasks. It may be very time consuming to convert the business object, depending on whether an individual subtype (assigned to BUS1001) is created.
    In other words, after you implement the note, the workflow items for business object BUS1001 can no longer be displayed in the material master.
    Solution
    With the following correction you can call the Generic Object Services for both business objects. When it is called, the system displays a dialog box in which you can choose the required business object, that is, BUS1001 ('Material') or BUS1001006 ('Standard material').
    This correction is delivered as a modification supported by SAP only. This is because the additional option means that attachments can be maintained as required in either of the business objects and users may therefore require extra training.
    However, the corrections enable you to display attachments and workflow items for both business objects without the need for a major conversion; this means that you do not get the impression that these have been lost.
    Alternatively, as of Release 4.70 (or Basis 6.20) you can, without making a modification, implement method ADD_OBJECTS of BAdI GOS_MULT_PUBLISH for filter attribute WF_OVERVIEW ('Workflow overview'), SRELATIONS ('Relationships') and VIEW_ATTA ('Attachment list'). The implementation should be similar to the following:
    METHOD if_ex_gos_mult_publish~add_objects .
      DATA:
        ls_lporb TYPE sibflporb.
      READ TABLE ct_lporb INTO ls_lporb INDEX 1.
      if ls_lporb-typeid = 'BUS1001006'.
        ls_lporb-typeid = 'BUS1001'.
        append ls_lporb to ct_lporb.
      endif.
    endmethod.

  • Creating Business Object Reports and Dashboards utilizing Informatica

    I need to create Business Object Reports and Dashboards utilizing Informatica database. Please let me know what connections I need to create to integrate the data into Web Intelligence, Universe, Xcelsius, and Crystal Reports.
    Thank you

    I've just done some quick checking and I don't see a native connection type for Infomatica in Designer or Crystal.  (Designer is a tool for building universes - WebI and Xcelsius both read data through a universe, Crystal can read data through a direct connection to the database or through a universe.) This means you'll probably have to set up a "generic" ODBC connection in order to connect to it.
    -Dell

  • We have enterprise License through which a provisional profile was created to generate .ipa and install the organisation application to employees ipads. Its getting expire tomorrow (7th Feb'14). Do this expiration will stop the application to launch?

    We have enterprise License through which a provisional profile was created to generate .ipa and install that .ipa to employees ipads. Provisional Profile getting expire tomorrow (7th Feb'14).
    1. Do this expiration will stop the already installed application in employee ipads to run?
    2. Also if i create some new .ipa today, can that .ipa be installed some other day or any time even after expiration of Provisional Profile?
    Please help, I need the answers of above two questions as renewal of my Enterprise license and creating a new provisonal profile going to take some time in my organisation and application is must for all employees.

    Guys please reply...

  • How can I change the appe ID that is registred in my Ipad? It was bought for a friend and he put his own ID. I have my ID but I don' t know how I can install it in my Ipad

    How can I change the appe ID that is registred in my Ipad? It was bought for a friend and he put his own ID. I have my ID but I don' t know how I can install it in my Ipad

    Tap on the id in Settings > Store and log out of it and then log in with your id. But if there is any content on the iPad from his account then you are probably better off resetting back to factory defaults via Settings > General > Reset > Erase All Content And Settings and starting 'as new' with it - content is tied to the id that bought/downloaded it so your account won't be able to download updates to any of his apps, and unless his account is authorised on your computer's iTunes and his content is on there then it will be deleted when you sync to it.

  • I was away for 3 weeks and just got back. Put my Mac on charge and after 4 hours it still won't come on. Help!!!

    I was away for 3 weeks and just got back. Put my Mac on charge and after 4 hours it still won't come on. Help

    Rachg wrote:
    Had turned off all power supply incase a socket blew. (happened before) so my mbp was on sleep
    You should have turned your MBP off!  Keeping it on sleep w/o use for 3 weeks makes no sense.  As others have already stated, you will need to take your comp to a repair shop.  More than likely you need a new battery.

  • I have a file that was created in FH 11 and I am using same version.Originator opens file and everything is fine and also earlier version opens it fine.when I open it the links shift 1/8" up and left.Has anybody had this happen to them

    I have a file that was created in FH 11 and I am using same version.Originator opens this file and everything is fine and also an earlier version opens it fine.When I open it it shifts the links 1/8" up and to the left.Has anybody ever had this happen to them?

    What file format(s) are the "links"?
    If raster images, do they contain clipping paths or transparency?
    What is your platform and OS?
    Were the FH documents created on the same platform (Mac or PC) as the one you are currently using?
    Were the linked files created on the same platform (Mac or PC) as the one you are currently using?
    Can you reproduce the problem with a newly created document and the same linked images?
    There was once an issue with transparent 1-bit TIFF images shifting, but I believe that was in a previous version of FH.

  • 8dot3 filenames not created for Program Files and Program Files (x86)

    Interesting issue we are realizing on Servers deployed from SCCM 2012. 8dot3names are not created for Program Files and Program Files (x86). they are created for other files/folders at the root of C and below Program Files and Program Files (x86). This is
    causing issues when programs are installed and the path is then created with 8dot3 filenames for program files and program files (x86)

    Arg. we just got bitten by this "feature", and it's affecting our security software stack (name starts with M and ends with ee), and some ancient crud too.
    And found this, which suggests a logical reason for 8dot3name to not be present on servers, but, on clients, I think it's a rather gross assumption...
    http://blogs.technet.com/b/josebda/archive/2012/11/13/windows-server-2012-file-server-tip-disable-8-3-naming-and-strip-those-short-names-too.aspx
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • I made a purchase of books through the program, with the money as I was cleared for two purchases and I did not have books

    I made a purchase of books through the program, with the money as I was cleared for two purchases and I did not have books

    This morning, I did a power down and reboot of the I-Pad, that got the "Please Wait" resolved.  I then tried clicking on the additional picture set and it did download and install, so the problem is now resolved.

  • Hello! Can't open an IDML file. ID file was created in CC (10). It is a 100 page (50 spreads) doc that is one big table. It was created in CC (10) and saved as an IDML file. I have CS6 and when I try to open it, it shuts down ID almost instantly. The file

    Hello! Can't open an IDML file. ID file was created in CC (10). It is a 100 page (50 spreads) doc that is one big table. It was created in CC (10) and saved as an IDML file. I have CS6 and when I try to open it, it shuts down ID almost instantly. The file was created on a MAC and I am trying to open it on a MAC. Any/all advice is greatly appreciated as I am up against a deadline with this unopened file! Many thanks in advance, Diane

    There's a good chance the file is corrupt. As whomever sent it to you to verify it opens on their end.

  • HT4914 I was billed for iTunes Match and I was not aware and would like to cancel it and get a refund for it. I don't store my music in iCloud and still have 4.5 gig of my 5 gig free. Please advise

    I was billed for iTunes Match and I was not aware and would like to cancel it and get a refund for it. I don't store my music in iCloud and still have 4.5 gig of my 5 gig free. Please advise

    Go here:
    http://www.apple.com/support/itunes/contact/
    and follow the instructions to contact the iTunes Store and make your request.
    Regards.

  • I recently purchased "The Simpsons Movie" on iTunes, but it is not appearing on my cloud - or under recent purchases in iTunes. I was charged for the purchase and received a receipt. During the download i received an error message.

    I recently purchased "The Simpsons Movie" on iTunes, but it is not appearing on my cloud - or under recent purchases in iTunes. I was charged for the purchase and received a receipt. During the download i received an error message.

    Store > Check for available downloads
    Or report a problem...
    tt2

  • HT1349 should i replace the battery if my laptop is 3 years old and wont start up or recieve power ... took it to apple and the guy readjusted my battery and it was fine for two days and same thing happened? thinking of buying a new battery

    should i replace the battery if my laptop is 3 years old and wont start up or recieve power ... took it to apple and the guy readjusted my battery and it was fine for two days and same thing happened? thinking of buying a new battery

    I am bemused and have to ask how one "readjusts" a battery?

Maybe you are looking for