No logical system maintained for party entitled to dispose

Dear Experts,
"Party Entitled to Dispose"   field is empty and not editable in the node -
> "Map Storage Locations from ERP System to EWM" in Interface.
Here, I am getting the error message "No logical system maintained for party entitled to dispose" .
I am suspecting, because of the above issue, I am getting another message "Party entitled to dispose SH01 is not allowed in warehouse number INCH"   while creating Outbound Delivery in EWM directly.
Kindly help me understand how to get rid of this message to proceed further.
Regards,
Shetty

Hi Shashidhar ,
Kindly guide as how you managed to solve error "
" No logical system maintained for party entitled to dispose XXX "
Thanks in advance for your kind cooperation.
Jinoy

Similar Messages

  • Logical system entry for table entry

    Hi,
      After system copy from one system name to another , I am facing some inconsistenices in various tables.
    The table entry can be seen in se16.But when I try to select entries from the same table using SELECT statement, table are not getting populated.
    I ran the BDLS also . How do I check the logical system entried for table where I have inconsistent entries?
    Thanks,
    Chitta

    Hello Chitta,
    But when I try to select entries from the same table using SELECT statement, table are not getting populated.
    what are you trying to populate?
    If your question is, its not showing anything... what error message you're getting? are you trying to run in the DB level?
    If you're getting error, that this object doesn't exist in the database then you might not be logging with correct user. its an SAP table, then its owner is the SAP schema user. If you login with the schema user, it should show in a normal select statement. But if you login with <sid>adm then you have to give the correct schema id before tablename.
    select * from <SchemaID>.<tablename>
    SchemaID may be sapr3, sapsr3, or sap<SID> depending on your release.
    Regards,
    Debasis.

  • Same logical system name for two productive systems - BW, PI issues

    Dear all,
    we have a productive system which serves two companies (different company codes). This system is connected both to BW and PI for both companies.
    There is a requirement that these two companies must use their own system, so the whole landscape (dev,qa,prd) will be copied to different systems (different server with different system id).
    As a result of the above procedure we wll have two different productive systems, as required, but we wll have the same logical system name for the two productive systems, which must be both connect to bw and PI.
    However as far as I know:
    - we cannot connect systems with same logical system name to BW,PI
    - we cannot convert logical system name of the one of the two productive systems as they are productive and so this is not supported.
    How can we overcome the problem?
    Please advice.

    > However as far as I know:
    > - we cannot connect systems with same logical system name to BW,PI
    > - we cannot convert logical system name of the one of the two productive systems as they are productive and so this is not supported.
    Right.
    > How can we overcome the problem?
    Since you split up systems (or plan to) I highly recommend booking an SLO service (http://service.sap.com/slo). Those people have to the tools and the knowlege to help you. I would not do this on my own.
    Markus

  • Giving logical system name for PI 7.11 system

    Hi,
    how can i give logical system name for PI 7.11?
    Thanks.

    Check if this helps http://help.sap.com/saphelp_nw70/helpdata/en/aa/b4b13b00ae793be10000000a11402f/frameset.htm
    if you are loking for naming conventing : use  CLNT{client no.} eg: PIDCLNT001
    Regards,
    Srinivas

  • Logical system name for this BI is not allowed

    Working under Data Warehouse Workbench, when I click BI Content button, I get pop-up: "Logical system name for this BI is not allowed". Then I get three options from NW system: "Create",  "Assign" or "Cancel".
    What can I do? How to create a new Logical System?
    Thanks,
    Mike

    Refer this link to create a Logical System...
    http://help.sap.com/saphelp_nw70/helpdata/en/aa/b4b13b00ae793be10000000a11402f/content.htm

  • Changing the default logical system names for adaptive RFC models

    Hello,
    When I create an Adaptive RFC model the dialog that asks me to specify the model name, package, source folder, etc. has default values in the "Default logical system name for model instances" and "... RFC metadata".
    I know I can type in another name there but I'd like to change the default name to something that fits our naming conventions. Can I change that? If so, can someone tell me where?
    Thanks in advance!
    David.

    Suresh,
    Thank you for your response. However, that is not what I was looking for. Sorry if my post was not clear.
    I knew that I could change it AFTER the import. I also know that I can type in something else besides the default DURING the import.
    What I am asking is if there is a way to change some configuration setting so that the 'default' that comes up in the drop down DURING the import is something different than what comes 'out-of-the-box' with NWDS.
    Hope that clears up what I'm looking for.
    David.
    Message was edited by:
            David Z. Pantich

  • RSTCO_ADMIN - "No logical system exists for client 100"

    Hi all.
    I am trying to run RSTCO_ADMIN in a BI 7.0 SP11 system. The activation stops / fails, and in the log I get a warning message saying:
    "No logical system exists for client 100".
    In SALE and SCC4 I have created a logical system TBQCLNT100 and assigned it to client 100. Client 100 was created with a client copy from client 000.
    Does anyone know what I have to do to fix this?
    Thanks!
    Best Regards,
    Thomas

    Thomas
    Check if you have configured the RSADMINA table, here you will see a "bw client" filed, put 100 as your bi client.
    Regards

  • Party entitled to dispose

    Hi all,
    I am trying to understand the role of Party entitled to dispose but I still don't feel comfortable after reading help provided by SAP. My confusion is what exactly it is? Is it the vendor that is created for a ERP plant which got replicated in SCM or is it the plant itself. Can anyone explain to me with an example of an organization with multiple plants. Say Plant-A is a mfg plant, Plant-B is a DC, both owned by an organization. Who will be the party entitled to dispose here?

    Hi
    Yes, the documentation could be much more elaborative.
    To me ,  the Party Entitled to Dsipose ' is  the Partner (or organization )  entitled to dispose of stock. Usually this is the plant in which the stocks are planned, and in which the ATP check is performed. Each stock must be assigned to a party entitled to dispose, meaning  that it is possible to manage stocks from several plants in one warehouse number.
    In your example , eiher one of those two can be the party entitled to dispose. It could be that in particuar situation Manufacturing plant is the party which is responsible for dsiposal.
    Regards
    Datta

  • SLD: Adjust / Add logical system name for Business System [XI 3.0]

    Hi,
    In the <b>System Landscape Directory</b>, is it possible to adjust the logical system name of an already created business system?
    I found in the content maintenance in Subset="All Classes", Class=SAP_BCClient" --> <MY_BUSINESSSYSTEM_ENTRY> the only possibility to add information on the logical system name of a business system.
    Unfortunately, the information provided in the BCClient Entry is not forwarded to the Business System Entry for my Business System in the Business Landscape View of the SLD...
    Is there another possibility to add the logical system name to an exisiting business system?
    Regards
    Kristian

    In a third party business system, it is not possible to add a logical system, but you can delete the business system and recreate it with the same name without problems.
    After assigning a new logical system to a business system, you have to go to the integration directory and reload the logical system for the business system. Therefore open the Business System in change mode and maintain the Logical System with menu service -> Adapterspecific Identifiers.
    Regards
    Stefan

  • Logical system name for acknowledgement in BPM

    Hi,
    I have a szenario:
    IDOC --> BPM --> MAIL
    Inside BPM I check the message and depending on an xml-element I stop the process or I send the message by mail.
    When I stop the process the BPM sends back an acknowledgement and in SXMB_MONI I can see an error of the acknowledgement:
    "Sender Test_BPM_IDOC_TO_MAIL kann nicht in ein ALE Logisches System umgeschlüsselt werden" (Sender can not convert in a ALE logical system)
    What can I do?
    Possible Solution 1:
    I can define my BPM "Test_BPM_IDOC_TO_MAIL" as a logical system (including WE20 for ALEAUD).
    Possible Solution 2:
    I can enter an existing logical system name in the "adapter specific attributes".
    BUT it is not use the same logical system name twice (BAD ... or is there a workaround?
    Is Solution 1) a common way?
    Thanx
    Regards
    Wolfgang Hummel

    Hi,
    there are many ways:
    some for aleaud are described in my book:
    <a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
    >>>>Is Solution 1) a common way?
    no this is not good a good idea
    BTW
    you can also supress aleaud raport IDX_NOALE
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • Stuck with logical system name for JDBC Sender system!!!!!!!!!!!!!

    Hi All,
    I'm doing a scenario as JDBC2FILE.
    I tried to add my jdbc sender system to SLD. So i created the technical system
    now i'm creating business system...what should i give at logical system name tab? I've created tech system and business system as third party.
    do we need logical system name in this scenario where we are not interacting with any R/3???
    can anyone suggest the way to achieve this scenario?
    Thanks in advance.....
    Santhosh.

    Hi Santhosh,
    I just want to add ons..few more information which it might help you.
      You no need to give logical system when you are using Thirdpaty.
    Please check the below blog you will get more idea how to proceed to achieve the JDBC Scenario.
    /people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
    If you have any doubts while proceeding with your scenario plesae let me know..I will try my level best.
    Thanks and Regards,
    Chandu

  • Defining Logical System name for ALE using T.C- SPRO?

    Hi,
    Can anybody tell, how to define logical system name using T.C SPRO?
    Where can I find the "Define Logical System for ALE"?
    Thanks
    Balaji

    HI,
    Use the SALE transaction , there you can have all steps clearly,
    please see the below links
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
    /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
    /people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
    /people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping
    Regards
    Chilla..

  • Incorrect logical system name for datasources - entry not in TADIR

    Hi all,
    I currently can't replicate or edit any of my data sources because, after we applied some patches, the logical system name appears to be incorrect and a message is displayed saying the R3TR RSDS entry does not exist in table TADIR.
    For example:
    Object directory entry R3TR RSDS 0EMPLOYEE_0016_ATTR           R3DEV does not exist.
    That's correct, because all entries exist for my actual source system CD1CLNT175, not for SAP standard R3DEV.
    Does anybody have any idea how I can update my source system configuration/mapping? I've looked on the forum but couldn't
    find a clear cut answer.
    Thanks a lot!
    Markus

    Hi all,
    I think the solution lies in SAP note 1604726 "DataSources with package assignment cannot be activated"
    1. When you access the change transaction RSDS, the system issues error message TK 753 "Object directory entry R3TR ... does not exist" twice.
    2. When you try to activate the DataSource, the system issues error message TK 425 "Invalid call sequence for interfaces when recording changes".
    My message is TK753.. and before that I receive TK425, I guess we have to apply SP28... time for Mario and Luigi to apply some pizzas... ehmm patches...!
    I will let you know if that solved the problem, thanks for your help guys!
    Markus

  • Logical System Name for Portal

    Hi all,
    I am busy documenting System Info for a newly installed Portal (EP6) including values such as SID, Sys No, etc.
    I would like to know if a Portal has a Logical System Name.
    As far as I know, it does not, but I would like to confirm.
    Regards
    Sunil

    Hi,
    As per the naming conventions its defined as <SID>CLNT<Client no>.
    Then a system with SID = J2E and client = 000 will have a logical system name J2ECLNT000.
    Hope this helps.
    Regards
    Bharathwaj

  • Default logical system names for application and metadata in models.

    hi,
    I have a dbt in web dynpro java. When we create a model, we give the logical system names. When our developement is over, do we have to change these names because in test system and subsequently production system, the backends will be oviously different than developement ?
    how do we change them and re import after changing? in abap we cant change our code in test and prod systems right  so how is it in web dynpro java ?
    thanks

    Hi Jeschael,
    thanks for the reponse.
    When I create the model, I give the default logical system names and on the next screen I give the
    ip address of the backend system, client , login, password etc
    Even though the logical system names wud be same in Dev, Test and Prod systems, the ip address, login password is different so how do I give it ?
    thanks
    B

Maybe you are looking for