No longer able to access Web Management after Firmware Update [SF200]

Hello!
Today I was attempting to set up SNMP on our SF200-48 switch. I realized we were running old firmware which does not support SNMP and that the most current version (1.4.0.88) does support it. I attempted to upgrade the firmware but it failed, so I decided to install the 1.1.2.0 firmware because I read that the firmware flash process has changed before 1.4
Unfortunately, after rebooting I was no longer able to access web management on the switch. Unfortunately SF200 switches do not support CLI.
The switch is functional and responds to ping, but I cannot get into management to do anything, is there any steps we can try or will I need to reset the switch? After resetting the switch, will I lose any configuration but still not be able to access management? We do not have any other switches to drop in place of this one, and I'd like to minimize downtime as much as possible.
thanks,
Graham Rounds

Hi Graham,
if you are sure that the ping response is coming from the switch then I guess the only thing you could try is the factory reset but you will loose all the configuration. You might call also Small Business Team and open a ticket so they will proceed with RMA if necessary:
http://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html
Regards,
Aleksandra

Similar Messages

I smashed my IPAD glass and after having it repaired I am no longer able to access wifi unless I am right next to my router. Has anyone else had this experience and what is solution?

I smashed my IPAD glass and after having it repaired I am no longer able to access wifi unless I am right next to my router. Has anyone else had this experience and what is solution?

Given the complexity in merely getting the thing open, that is likely. Or they forgot to reconnect it. See #14 and from #52 on down in: http://www.ifixit.com/Guide/Installing+iPad+2+GSM+Bluetooth-Wi-Fi+Antenna/6166/1

My old email address was hacked and I am no longer able to access it. How can i reset my icloud ID without losing all of my pictures and more inportantly contacts? I have created a new ID but i cannot seem to use it until I delete the old account

my old email address was hacked and I am no longer able to access it. How can i reset my icloud ID without losing all of my pictures and more importantly contacts? I have created a new ID but i cannot seem to use it until I delete the old account

You need to use the old ID and password to delete the iCloud account. After you delete the old account, you can sign in with the new ID in iCloud.
Have you seen this.
http://support.apple.com/kb/HT5796
iCloud
iOS 6 and later: Go to Settings > iCloud.
If you signed out before changing your Apple ID, enter your current Apple ID to sign in. The data from your iCloud account will download to your device.
If you're still signed in with your previous Apple ID:
Scroll down and tap Delete Account. Depending on what iCloud options are turned on, you'll be asked to confirm that you want to delete data from your device. To confirm, tap Delete. (If you're using iOS 7 and have Find My iPhone turned on, you'll be asked to enter the password for your previous Apple ID. Enter the password, then tap Turn Off.) The data will be deleted from your device, but not from iCloud.
Enter your current Apple ID to sign in. The data from your iCloud account will download again to your device.

No longer able to access the "Advanced" options via the Inspector Chart Series Advanced sequence

In iWorks9 Numbers in attempting to add trendline to a line chart I am suddenly no longer able to access the options under "Advanced" via the Click On Chart Line>Inspector>Chart>Series>Advanced sequence because the triangle button adjacent to Advanced is not highlighted and does not open up when clicked upon. Ideas?

well ... I spent some time this afternoon repairing disk permissions, checking application preferences, etc. and don't think I found anything directly related to this problem but after a few hours I returned to Numbers and lo and behold something changed and everything is working fine ... and I have no idea what was the cause and what was the fix but I'll take it. Heisenberg was right.

Upgraded to Mountain Lion and CS3, I am no longer able to access the correct dialog box for fine printing with Epson Stylus Photo 1400.

I have recently upgraded my Mac OS to Mountain Lion, and am using Photoshop CS3 together with Lightroom 5. To my absolute horror, in either Adobe program I am no longer able to access the dialog box which allows me to choose paper type, size, and print quality when attempting to print on my Epson Stylus Photo 1400. An excruciating hour on the phone with largely unintelligible folks at Epson seemed to prove the problem lies with Adobe instead of Epson. I'd greatly appreciate whatever advice might be forthcoming from the Community.

Well, this seemed to work.. can't believe it! After a year of messing with this!
from Stevejones5
"I found a way around this problem. GO to HD/Library/Printers/Epson/InkjetPrinter/ICCProfiles and you will find a file labeled Pro38.profiles. This is a package file. Control click on it and reveal contents. Then you can copy all the profiles and paste them into your Colorsync folder either in the HD/Library folder or your own Home folder/Library. Then the profiles will show up in Photoshop and Lightroom."
Key, is to Control click on the printer to "Open contents". Then open Resource folder. Copy everything in it and then paste it into the "Colorsync" folder in your Library. (Remember, to get to Library you have to hold the command key down for it to appear in "Go" Menu for Finder.
Then I reinstalled printer driver from Apple, then rebooted computer, then plugged in printer. And VOILA-- I can now select Epson Premium Photo Paper Luster!

I have a MacBook Air and recently downloaded the new operating system. Since that time, I am no longer able to access my personal ITunes library to add music to IPhoto slideshows. I put I tunes library on my desktop, as suggested. How do I drag it?

I have a MacBook Air and recently downloaded the new operating system, 10.10 OSX Yosemite. Since that time, I am no longer able to access my personal ITunes library to add music to IPhoto slideshows. I put I tunes library on my desktop, as suggested. How do I drag it to the I Photo slideshow?

That crash appears to be casued by the Facebook plug-in.
Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.

Unable to access Web Method after deploying into the server

Hi,
I'm Unable to access Web method after deploying into the server.
My Web method is
[WebMethod]
[ScriptMethod(ResponseFormat = ResponseFormat.Json )]
public object getOwners()
DataTable dt = _qbObj.returnDDLData("employeedetails", "EmpID", "EmpFirstName");
if (dt == null)
return new { Result = "Error", Options = "Error getting data" };
string[] strAttributes = { "ID", "Name" };
string[] strColName = { "EmpID", "EmpFirstName" };
List<SolOwners> lstObject = convertToList(dt, strAttributes, strColName, new SolOwners());
var owners = lstObject.Select(c => new { DisplayText = c.Name, Value = c.ID });
return new { Result = "OK", Options = owners };
When I.m accessing that method after deploying into server, I got following error.
System.InvalidOperationException: There was an error generating the XML document. ---> System.InvalidOperationException: <>f__AnonymousType9`2[System.String,System.Collections.Generic.IEnumerable`1[<>f__AnonymousTypea`2[System.String,System.String]]] cannot be serialized because it does not have a parameterless constructor.
at System.Xml.Serialization.TypeScope.GetTypeDesc(Type type, MemberInfo source, Boolean directReference, Boolean throwOnError)
at System.Xml.Serialization.XmlSerializationWriter.CreateUnknownTypeException(Type type)
at System.Xml.Serialization.XmlSerializationWriter.WriteTypedPrimitive(String name, String ns, Object o, Boolean xsiType)
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationWriter1.Write1_Object(String n, String ns, Object o, Boolean isNullable, Boolean needType)
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationWriter1.Write71_anyType(Object o)
at System.Xml.Serialization.XmlSerializer.Serialize(XmlWriter xmlWriter, Object o, XmlSerializerNamespaces namespaces, String encodingStyle, String id)
--- End of inner exception stack trace ---
at System.Xml.Serialization.XmlSerializer.Serialize(XmlWriter xmlWriter, Object o, XmlSerializerNamespaces namespaces, String encodingStyle, String id)
at System.Xml.Serialization.XmlSerializer.Serialize(TextWriter textWriter, Object o, XmlSerializerNamespaces namespaces)
at System.Web.Services.Protocols.XmlReturnWriter.Write(HttpResponse response, Stream outputStream, Object returnValue)
at System.Web.Services.Protocols.WebServiceHandler.WriteReturns(Object[] returnValues)
at System.Web.Services.Protocols.WebServiceHandler.Invoke()Please help me to solve that issue.Thank you.

Hi Vani,
What project are you developing? According to your code looks like an Asp.Net application? Am i right?
If so , please repost in ASP.Net Forum
http://forums.asp.net for more efficient responses.
This forum is discuss problems of C# development.
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SA520W Configuration Access Issues After Firmware Update

The problem I'm having is a minor one, but a problem nonetheless. I'm new to this company and took over from the previous IT guy who was let go so he's the one who set all this up. We are using a Cisco 1841 which was provided by our ISP, and it is plugged in to the WAN port on the SA520W. The SA520W has the static Wan connection info and it is what makes the connection. Initially, we were able to access the SA520W configuration page with either it's default gateway 192.168.5.1 or with the IP 204.101.24.67, which is the static IP in the Optional WAN Port settings of the SA520W. After upgrading our SA520W from 1.1.42 to 1.1.65, I am no longer able to access the router using 204.101.24.67. I can only get in using the default gateway (192.168.5.1). The Optional WAN port is not in use and never has been which confuses me - I took screenshots of all the settings before the upgrade and nothing has changed at all. I guess I'm confused as to how I was initially able to access the router using 204.101.24.67, and why it stopped working after the firmware upgrade. Does anyone have any suggestions?

I re-read your original Post; are you not using the WAN port also? Did you try and remote in from a switch attached directly to the WAN/Optional WAN port? I am asking as I have almost the exact same setup using an 1811 which is NATing the SA. I could not reach it as the one-to-one NAT on the 1811 was not set correctly. I also went through the firmware upgrade and experience the same issues you are. I had the CISCO account with WAN access, and the upgrade removed that (after a lot of scratching). However, my real problem was also the routing on the 1811. I eventually had to get the guys to do a one-one NAT and remove all ACL and rules, but that does not mean it can't be done with it either. Try reaching it with a switch or cable and see what happens.

After firmware update to V2.0.03, the web UI dos not look right. (WRT160 V2)

Hi
After firmware update from V2.0.01 to V2.0.03, the web UI dos not look right.
I can't see menus, just version number and the basic setup page.
Router Linksys WRT160 v2.
Allan

Hi
Thanks for the reply.
I't works ok now.
Thanks again.
Allan

TS3899 Unable to access E-mail after new update

Unable to access ER-mail after new update. Most recomendations delete the account with contacts---any other solutions??

Contact the email provider to troubleshooting.
Delete and re-add the account.
Without any details about the issue there is little to nothing that we fellow users can suggest.

Restoring after firmware update - Ways :)

Hi All,
Nowadays we are receiving quite a few complaints that customers are unable to restore the application after updating their firmware. I would like all to discuss to come up with some ways to restore their applications after firmware update.
Before updating firmware
Customer can backup his phone using Nokia PC Suite's Content Copier application.
He can store his Contacts and Messages using Nokia Communication Centre as .csv file or .txt file.
For his Contacts he can sync with pc suite supported sync applications.
Messages he can store in Memory card and he can make a backup of memory card in PC.
If he is using Nokia PC Suite for his Multimedia items he can use Image Store if he is using Nokia PC Suite or Nokia Photos if he is using Nokia OVI Suite.
For Music he can use Nokia Music Manager or Nokia Music.
Once after updating his firmware, if he is unable to restore he can get those from above said applications.
If his calendar entries are not restored(as in case of some of Nokia e 71s and Nokia N 95/95 8 GBs), for God's sake if he has got one more similar device(or device having switch application on phone), he can restore the backup file to another phone having switch application, then he can transfer his data (Contacts, Calenders etc ) to his original phone
Dear Forum members, if you have got any other work around please let me know regarding the same, which will help our customers

Hi,
If you have issue in Nokia PC Suites, [subject to your phone's compatibility with Nokia OVI Suite 2.0.0.10 ],
you can install Nokia OVI Suite 2.0.0.10 and check if you can take backup and restore it later.
Also i would suggest to use USB for taking backup, since it will be faster than Bluetooth. Also you can select one category at one time(say backup contacts alone, then Calendar, then messages etc and so on ....)
Its better to skip memory card backup while backup-ing other Phone data for faster backup. Memory card backup can be done separtely(since it wont be affetcted while updating firmware, users can safely remove memory card while updating firmware)
Nowadays though recent phones has got UDP(User Data Prevention i.e., even if you update your phone's firmware, your data wont get erased ), still it is recommended to backup your phone data.
Hope this could help
I welcome our experts to add more details related to this topic.

Data recovery after firmware update

Hi guys,
does anyone know it it is possible to recover data after firmware update in N8? some data are preserved (videos) and some are lost (photos).
thx.

if you didn't backup them, there is no way to recover them
Greece Nokia X6 RM-559 v40.0.002

3014 error i can't restore ipad after firmware update attempt

3014 error i can't restore ipad after firmware update attempt

See this thread with the same question.
https://discussions.apple.com/thread/5045573?tstart=0

Problems after firmware update 52.0.007

Hi,
I got my phone back after the shop fixed a problem and updated the firmware to the latest version 52.0.007.
But now I have following problems:
I can't get the calendar anymore to show up on the homescreen, even after checking the checkbox to do so
The Radio app. is gone
Does anyone has a solution for this?
Iwan

It may sound crazy but sometimes you need to "hard reset" device after firmware update (beware all data erased) by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by yourself). Sometimes UDP = User Data Prersevation feature of 5800XM can carry over corrupt entries when updating.
Happy to have helped forum with a Support Ratio = 42.5

Ovi Maps 3 don´t start after firmware update (6220...

Hello!
a few days ago I installed ovi maps 3 on my nokia 6220c and it works well. Later I updated the firmware from version 03.06 to 05.15.
After firmware update ovi maps don´t start-> "Cannot open application. Install latest version from nokia.com/maps."
But Nokia Map Updater says, there are no updates for my maps.
What´s wrong?
Can I reinstall Ovi Maps 3? Or is it possible to install Ovi Maps 3 new?
thanks

Hello!
The Map Updater said: "there is no update for your phone" ...because maps 3 is already installed.
But in the meantime I have found a solution!!
I downloaded maps 2.0 from the German nokia page and installed it. Later I started Map Updater and could update to Maps 3 and now it works!!!
I think the problem was: I first updated to Maps 3 and later updated the firmware. There was any older version of fixes included in the firmware update, so Maps 3 was damaged...
thanks
sorry for my bad English

No longer able to access Web Management after Firmware Update [SF200]

Similar Messages

Maybe you are looking for