No longer able to edit images inside the blog module? Has BC removed this function?

When inserting images into a blog post I used to be able to resize images, add margins, etc. I tried to do this recently but those tools were no longer there. Is this no longer available? Below is a screenshot of what it used to look like.
Since there is no featured image for blog posts I've been inserting images into the first paragraph as a work around. Not being able to edit those images directly in the blog module is going to make that more difficult.
I've been able to resize the image through code, but this is not exactly user friendly for clients.

Hi Beth, Liam answered this for me on another post.
Go into site settings / beta features/ untick active beta feature untick "enable for everybody". That should do the trick.
Check this link to see the conversation I am having with liam as I think we are on the same page....or maybe you can help with my questions...
is it possible to truncate the blog so 2 paragraphs show up?
cheers,
d

Similar Messages

Why can't I edit images in the develop module? It's telling me folders cannot be found.

Why can I not edit images in the develop module? It is telling me that the source folders cannot be found.

When I click on the RSS button, I got this
message:
"Safari can’t open the page “feed://wwwhome.cs.utwente.nl/~fiorezet/UT/Publications/rss.xml”. The error was: “unknown error” (NSURLErrorDomain:-1)
Will need to look further into that one.
I used the Feed Validator Website to check my RSS files. The Website says: "This feed does not validate". The site also shows in which lines the errors are. The link below shows what I mean:
http://feedvalidator.org/check.cgi?url=http%3A%2F%2Fwwwhome.cs.utwente.nl%2F%257 Efiorezet%2FUT%2FHome%2Frss.xml
What should I do to solve my problem?
Regards,

Why is iPhoto no longer able to edit nikon nef files?

Macbook pro 10.1,
freq. 2.8Ghz
16 GB of memory
500GB SSD
OS X 10.10
I am no longer able to edit my D800 raw files. I upgraded to Yosemite, re-installed iPhoto but I still cannot use the edit functions.

What happens, when you try? Do your RAW photos show as unsupported?
Then try to reinstall the RAW support. You need to exchange files in the System Library. So be sure to backup your computer before patching the system library.
The RAW support files are installed in the System Library in the folder "/System/Library/CoreServices" Folder:
To open this folder, use the Finder's "Go" menu. Click the smiling Finder icon in the Dock to bring the Finder forward.
Then type the keyboard shortcut ⇧⌘G (for "Finder > Go > Go to folder") and copy and paste "/System/Library/CoreServices" into the text field.
In the Finder window that will open, delete both the files "RawCamera.bundle" and "RawCameraSupport.bundle". You will have to enter your Administrator password.
Download the current RAW support update from Apple's Support Site:
Digital Camera RAW Compatibility Update 5.07 http://support.apple.com/kb/DL1757
In the Downloads folder you will find the disk image with the installer. Double click it to open and run and the installer.
Then restart your Mac.

I have snow leopard. Using iCloud, I an receive mail on my mac, but suddenly, I am no longer able to send email from the mac. I can still send it from the icloud web site. How do I regain the ability to send email from the mac?

I have snow leopard. Using iCloud, I can receive email on my mac, but, suddenly, I am no longer able to send email from the mac. I can send it from iCloud online. Any thoughts on how to regain the abilty to send email from my mac? Thanks.

Install ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Until recently I was able to send images in the body of my Yahoo emails. Now, I am getting the message "This message has been truncated", and the email does not go through. I do not have this problem using IE. Could you please help? Thank you.

Until recently I was able to send images in the body of my Yahoo emails. Now, I am getting the message "This message has been truncated", and the email does not go through. I do not have this problem using IE. Could you please help? Thank you.

Try this -> http://support.apple.com/kb/TA38632?viewlocale=en_US

I am a novice. I just bought a nikon d5200 and would like to know which Photoshop would serve me well at this juncture. I do not plan on becoming a professional, but would like to be able to edit and enhance the photographs that I will take. With sever

I am a novice. I just bought a nikon d5200 and would like to know which Photoshop would serve me well at this juncture. I do not plan on becoming a professional, but would like to be able to edit and enhance the photographs that I will take. With several Photoshop programs on the market please advise me as to which I should purchase for the purposes I described ?

I am a novice. I just bought a nikon d5200 and would like to know which Photoshop would serve me well at this juncture. I do not plan on becoming a professional, but would like to be able to edit and enhance the photographs that I will take. With several Photoshop programs on the market please advise me as to which I should purchase for the purposes I described ?

How do I create a duplicate image inside the same page? Then how do I change the color of that image

how do I create a duplicate image inside the same page? Then how do I change the color of that image from black to red?

Hello there!
Here is one way to create a duplicate image and colorize it. As you can see below, I have one image right now, that I want to duplicate.
My layers panel looks like below.
To duplicate your image, click the downward arrow on the right side of your Layer Panel.
Select Duplicate Layer. This will duplicate the layer that the image is on.
Select "OK" to approve the duplication.
As you can now see in the Layers panel, the image is duplicated. The new layer is now at the top of the Layer panel.
Now to colorize your image, go to Window > Adjustments.
The Adjustments panel will now be opened. Select the Hue and Saturation icon as seen circled in red.
The Hue and Saturation propertied panel will be opened. I selected "Colorize", and adjusted the hue and saturation bar to achieve the level red in my photo.
As you can see below, the image is now red.
Now i want to make sure only ONE of my image layers is red. I moved the Hue and Saturation layer to only be on top of the bottom layer. The image on the top layer now will not be affected by the red.
Select the move tool, so I can now move the image layers so we can see both of them.
With each image layer selected, you can take the move tool and move the images. I moved mine on top of eachother and you can see my red layer (bottom) and the non red layer (top).
I hope that helps. i have also included helpful links.
Please post back with any questions,
Janelle

My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module.

My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module. That means that I can correct exposure, highlights, shadows etc. but once I go to another picture and returned to the edited one the histogram (on the edited photo) and specifically the clipping triangles are white or some other color. This is normally suppose to indicate that some channel or all channels are clipped in the highlight/shadow areas. If I adjust any slider in the Basic panel even as little as one +/- value or press the J-key, the histogram will now show the original edit. Moving on to another photo and then returning to to previously edited one and again the edits are "not saved" and I have to hit the J-key or adjust a slider to see the previously edited information reflected in the histogram.
This is especially frustrating for fours reasons. If I have edited a shoot and return to it I cannot see from the clipping information whether the original edit was correct and of course I might re-edit it (to some now incorrect value). This brings up the second issue synchronization. I can't rely on it because if I go back to fine tune a specific image in the batch the triangles are white or some other color for that and every image. I have to hit the J-key to show/hide clipping or the back slash key to see before/after previews. This is the third issue which is very time consuming and inefficient regarding my workflow. The forth issue is that I have noticed that normally when an image is saved in PS, LR adds a copy of the saved version to its catalogue. I have noticed that the PS to LR saves are all wrong in terms of exposure (they are much lighter in tone) than the original LR edit and the PS edit on my screen. If I check the PS to LR photo in LR I notice that the Basic panel values have been changed and that I have to sync the image with the originally edited RAW/NEF LR file to get it to look the same.
Note 1). I am using an Apple cinema display and a calibrated Eizo ColorEdge monitor to view my NEF files. I have reverted back to using LR 4 however I am not sure if I should expect compatibility problems with Camera Raw 7.4 in LR 4 vs. Camera Raw 8.6 in LR 5.
Note 2.) I am going to do an import converting everything to .dng to see if this is a work around.
Note 3). I would be interested in knowing if this issue is related to the PS RAW engine ver. 8.6, the Adobe created NEF calibrations or LR 5.
Note 4). I have duplicated this issue in OS X 10.8.5, OS X 9.xx and OS X 10.10.1
Hopefully someone else has noticed this problem. Any shared information would be valuable. Thanks for the reply.

Happy New Year!
The Develop panel Tone settings in your Dec 31 screenshot show both the Highlights and Shadows controls set to negative values (-48 and -19). For most images (such as this model shot) they should be set to opposite values (-Highlights and +Shadows). To try and duplicate your issue I used negative values for both of these controls with a similar high contrast image. I noticed that the Shadows control becomes non-linear when both the Highlights and Shadows controls are set to negative values. As I moved the Shadows control from a positive value the Shadows clipping indicator comes ON as expected. Moving the Shadows control to a value caused the clipping indicator to turn OFF and moving it further negative caused it to turn back ON again.
The following screenshots demonstrate the issue with only Highlights & Shadows controls applied as shown.
The Highlights & Shadows controls set just to the threshold of extinguishing the clipping indicators.
Moving the Shadows control toward negative causes the Shadow clipping indicator to come ON (as expected), but at-13 it goes OFF again!
Moving the Shadows control further negative causes the Shadows clipping indicator to come back ON at -33.
This is probably normal behavior for the PV2012 Image Adaptive Tone controls as they were not designed to be used way (- - or ++ Highlights & Shadows). The PV2012 Tone controls all interact with each other, which is why it is suggested to adjust them from the Top down starting with Exposure. For most images using -Highlights and +Shadows of near equal value produces good results.
I still can't duplicate the change in clipping indicators after selecting another image, so it may be unique to certain camera models and/or lighting conditions.
SUGGESTION
Try one of the image files that exhibits this issue using the following PV2102 Tone control adjustment procedure:
Start with all of the Tone controls at their default 0 settings and adjust them from the top-down in the order shown below.
Set Exposure to correct midtone brightness ignoring the highlight and shadow areas for now. Setting Exposure slightly higher (+.25 to +.50 EV) than what looks correct for the midtones seems to work best with most images.
Leave Contrast at 0 for now. It’s usually better to adjust this after the first pass.
Adjust Highlights so that blown out areas are recovered and “fine tonal detail” is revealed.
Adjust Shadows to reveal fine detail in dark areas. For most normal images simply setting +Shadows = -Highlights (Example +50 and -50) works very well.
The Whites control sets the white clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
The Blacks control sets the black clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
Now go back and adjust the Contrast control to establish the best midtone contrast
If necessary “touch-up” the controls using the same top-down workflow.
If the issue persists I suggest Exporting an image to DNG file format with the settings that exhibit the issue and post it to Dropbox or other file download site.

I've recently downloaded an album but some songs only play half way through and i'm no longer able to hear any audio. What can i do about this? Thanks

I've recently downloaded an album but some songs only play half way through and i'm no longer able to hear any audio. What can i do about this? Thanks

I am sorry to hear. Yes it's very disappointing and the fact that you can't at least re-download your purchase makes it that much more irritating haha well thank you and good luck!

How do I create a collectio from developed images in the develop module of Lightroom 5?

How do I create a collestion of developped and modified images in the develop module of Lightroom 5

Right-click on Tone Curve and choose basic again or press Ctrl+1 in Develop.
On Mac (Control-Click or Cmd+1)

I rented to HD movies on Apple TV, biuth at the same time. I was able to watch one, butb the second says - error while laoding this content, try later - well I tried later numerous times and continuemto get same message. what is my next step??

I rented two HD movies on Apple TV, both at the same time. I was able to watch one, but the second says - "error while loading this content, try later" - well I tried later numerous times and continue to get the same message. What is my next step??

No, the film will be available for 30 days, but once you start watching it the clock will start running and it will expire after 24/48hrs (depending on location).
You said you rented on Apple TV, which has no accessible storage. When you choose to watch it starts to cache to the small flash drive, which is then flushed when you access another movie (or any other content). Everything is streamed so it will need to load each time. If you want to store any content you need to do so via computer.
Network issues can also contribute to seeing such an error. If on wifi, try ethernet. Make sure DNS is set to auto (settings - general - network). You can also see the status of your network by getting a report (istumbler, netstumbler or similar), to look for signal strength, noise, nearby networks.
Other services use adaptive streaming so they won't be much of an issue.

Usb 2.0 port on the right side (beside thunderbolt port) of macbook air 13" 2011 is busted, one of the pins inside the usb port is bent, is this replaceable? saw the pix on ifixit that it is part of the logic board.

usb 2.0 port on the right side (beside thunderbolt port) of macbook air 13" 2011 is busted, one of the pins inside the usb port is bent, is this replaceable? saw the pix on ifixit that it is part of the logic board.

The fix is a new logic board. It might be tempting to turn off the computer and start poking around inside to fix it yourself but you risk separating the port from the logic board and doing even more damage.

I'm using aperture 3 and mobile me to set up galleries which I send to friends. My question. Will icloud allow me to do the same or will i lose this function when mobile me closes down in July.

I'm using aperture 3/mobile me to set up photo galleries which I send to friends. My question. Will icloud allow me to do the same or will I lose this function when mobile me closes down in July. If this function isn't part of icloud does anybody have any suggestions how I can do this in future through aperature. Thank you

You will have to find a new hosting service for your galleries, when MM is gone; but you will still be able to create the galleries with Aperture. Export them to your disk and upload them via FTP to your new hosting service.
See these support articles: Migrating from Mobile Me
http://www.wilmut.webspace.virginmedia.com/notes/migrate/frommobileme3.html
and this FAQ about Mobile Me and iCloud Transition http://support.apple.com/kb/HT4597

Unable to initialize Photoshop because the preferences file has been removed

Hello
After a week without using photoshop, I can no longer open it. As soon as I try this message appears: "Unable to initialize Photoshop because the preferences file has been removed."
So, I went to look for this preferences file that I've never deleted and I can't find it.
I tried to reset photoshop with keyboard shortcuts preferences, it does not work. I also uninstalled and reinstalled the software, it does not work either.
What else could I do ...?
Thank you for your help.

lola.marceau wrote:
I tried to reset photoshop with keyboard shortcuts preferences,
Seems odd that such a problem would crop up on its own. That kind of sounds like a registry or permissions problem. What other things did you do with the computer between the time it worked and it didn't?
And if you're willing to uninstall / reinstall to try to recover operation, it might be prudent to try the Adobe cleaner tool to really be sure you've uninstalled everything...
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
-Noel

Dock has moved lower with Mountain Lion. This truncates the indicator light below the dock. Has anyone solved this problem?

Dock has moved lower with Mountain Lion. This truncates the indicator light below the dock. Has anyone solved this problem?

scottkb2000 wrote:
I'm confused. I just got an email from Apple Support Community (updates) and I see that a "baltwo" response is marked "This solved my question" (no offense directed towards baltwo). The question just seems to be more defined, not resolved. This is an Apple OS problem (seemingly) and needs to be directed towards a technical representative, not the community. I would ask that if anyone knows how to push this issue towards Apple, that is where the solution lies.
File a bug report with Apple via feedback. Do note that this goes through marketing and sales. No telling when it'll get to engineering. Alternatively, if you want to report this issue directly to Apple's engineering, bypassing marketing and sales, send a bug report or an enhancement request via its Bug Reporter system. To do this, register as an Apple Developer—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report or enhancement request. You'll get a response and a follow-up number; thus, starting a dialog with engineering and you'll be able to track its status.

No longer able to edit images inside the blog module? Has BC removed this function?

Similar Messages

Maybe you are looking for