No longer able to install packages

HI,
My remote desktop (3.5.1) crashed about a week ago. After the crash I have been unable to "Install packages" to any client from this laptop. There have been no changes in our network, or the client machines, or my login/password.
Under ARD preferences I've even set it to Full access for non-admins, just in-case. The client machines do allow installs in their remote desktop settings. I do have another machine with ARD 3.5.1 and CAN successfully install from that machine to the same clients.
I am able to copy, and run unix commands- only Install seems to be affected. Any ideas what might be causing this?

Try this link: https://discussions.apple.com/thread/3213196?tstart=0
Which hopefully takes you to a post by Scooter Magrooter that basically says
1. Open Remote Desktop Preferences/Task Server
2. Select to use a remote task server.
3. Put in an IP - scooter says any IP, I am much more successful with the IP of the computer I am on.
4. Probably will be asked for username and password.
5. Mine jumps back to "use this computer" automatically. If not, select that and close out.
Now try it.
I have to do this regularly. Annoying, but liveable.
Hope this does it for you.
Chicster

Similar Messages

LMS3.2 ciscoview 6.1.9 not able to install package Rtr2900.cv50.v2-0

Hi ,
I m not able to install package Rtr2900.cv50.v2-0 for cisco2951 router in cisco view .cisco2900 router is supported on LMS3.2 .
Tried online as well as manual method , via - Common Services --->Software Center > Device Update.
it says "there is no updates available ".Please let me know if there is any other method to upgrade package .
Thanx for your reply ..
Raj

Hi ,
I m not able to install package Rtr2900.cv50.v2-0 for cisco2951 router in cisco view .cisco2900 router is supported on LMS3.2 .
Tried online as well as manual method , via - Common Services --->Software Center > Device Update.
it says "there is no updates available ".Please let me know if there is any other method to upgrade package .
Thanx for your reply ..
Raj

Not able to install package

Hi, I need to push an executable, verified if it's a wrapped exe: no, the .exe is dotnet Framework ver. 4.5, I used package to deploy it but for some reason, status is just "installing"
Below is the log I got from execmgr
Policy arrived for parent package PHL00057 program dotNet4.5   execmgr   3/11/2014 12:01:11 PM   5144 (0x1418)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PHL00057",ProgramID="dotNet4.5", actionType 6l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l   execmgr   3/11/2014
12:01:11 PM   5144 (0x1418)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramOfferReceivedEvent
   AdvertisementId = "PHL2005A";
   ClientID = "GUID:22C73C54-734C-4CA9-95F0-685A872C87AA";
   DateTime = "20140311040111.919000+000";
   MachineName = "JREYES033W7";
   ProcessID = 6836;
   SiteCode = "PHL";
   ThreadID = 5144;
   execmgr   3/11/2014 12:01:11 PM   5144 (0x1418)
Validating chain of dependent programs for package PHL00057 optional program dotNet4.5   execmgr   3/11/2014 12:01:18 PM   5144 (0x1418)
Validating package PHL00057 program dotNet4.5 in the chain. The content request ID is {00000000-0000-0000-0000-000000000000}   execmgr   3/11/2014 12:01:18 PM   5144 (0x1418)
Creating an optional execution request for package PHL00057 program dotNet4.5    execmgr   3/11/2014 12:01:18 PM   5144 (0x1418)
Requesting content from CAS for package PHL00057 version 1   execmgr   3/11/2014 12:01:18 PM   5144 (0x1418)
Successfully created a content request handle {1CFD35A8-D941-4D59-B626-ACEE82D79F5A} for the package PHL00057 version 1   execmgr   3/11/2014 12:01:18 PM   5144 (0x1418)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistWaitingContentEvent
   AdvertisementId = "PHL2005A";
   ClientID = "GUID:22C73C54-734C-4CA9-95F0-685A872C87AA";
   DateTime = "20140311040118.603000+000";
   MachineName = "JREYES033W7";
   PackageName = "PHL00057";
   PackageVersion = "1";
   ProcessID = 6836;
   ProgramName = "dotNet4.5";
   SiteCode = "PHL";
   ThreadID = 5144;
   execmgr   3/11/2014 12:01:18 PM   5144 (0x1418)
Successfully raised SoftDistWaitingContentEvent event for program dotNet4.5   execmgr   3/11/2014 12:01:18 PM   5144 (0x1418)
Execution Request for advert package PHL00057 program dotNet4.5 state change from NotExist to WaitingContent   execmgr   3/11/2014 12:01:18 PM   5144 (0x1418)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PHL00057",ProgramID="dotNet4.5", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l   execmgr   3/11/2014
12:01:18 PM   5144 (0x1418)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PHL00057",ProgramID="dotNet4.5", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l   execmgr   3/11/2014
12:01:18 PM   4956 (0x135C)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PHL00057",ProgramID="dotNet4.5", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l   execmgr   3/11/2014
12:01:18 PM   6388 (0x18F4)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PHL00057",ProgramID="dotNet4.5", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l   execmgr   3/11/2014
12:01:18 PM   6388 (0x18F4)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PHL00057",ProgramID="dotNet4.5", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l   execmgr   3/11/2014
12:01:19 PM   7008 (0x1B60)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PHL00057",ProgramID="dotNet4.5", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l   execmgr   3/11/2014
12:01:19 PM   4956 (0x135C)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PHL00057",ProgramID="dotNet4.5", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l   execmgr   3/11/2014
12:01:31 PM   7940 (0x1F04)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PHL00057",ProgramID="dotNet4.5", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l   execmgr   3/11/2014
12:01:34 PM   7940 (0x1F04)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PHL00057",ProgramID="dotNet4.5", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l   execmgr   3/11/2014
12:01:37 PM   7008 (0x1B60)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PHL00057",ProgramID="dotNet4.5", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l   execmgr   3/11/2014
12:01:40 PM   7008 (0x1B60)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PHL00057",ProgramID="dotNet4.5", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l   execmgr   3/11/2014
12:01:42 PM   7940 (0x1F04)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PHL00057",ProgramID="dotNet4.5", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l   execmgr   3/11/2014
12:01:45 PM   7940 (0x1F04)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PHL00057",ProgramID="dotNet4.5", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l   execmgr   3/11/2014
12:01:48 PM   4956 (0x135C)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PHL00057",ProgramID="dotNet4.5", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l   execmgr   3/11/2014
12:01:49 PM   7940 (0x1F04)
Processing [{1CFD35A8-D941-4D59-B626-ACEE82D79F5A}, 0]: OnContentAvailable    execmgr   3/11/2014 12:02:20 PM   6388 (0x18F4)
[{1CFD35A8-D941-4D59-B626-ACEE82D79F5A}]: Content Version 1 is available for advert , pkg: PHL00057, program dotNet4.5.   execmgr   3/11/2014 12:02:20 PM   6388 (0x18F4)
An existing MTC token was not supplied, using ExecutionRequest's Id as MTC token and this execution request is the owner of resultant MTC task.   execmgr   3/11/2014 12:02:20 PM   6388 (0x18F4)
Request a MTC task for execution request of package PHL00057, program dotNet4.5 with request id: {D7AF4308-9884-46F4-AC4F-77A105611E75}   execmgr   3/11/2014 12:02:20 PM   6388 (0x18F4)
Execution Request for advert package PHL00057 program dotNet4.5 state change from WaitingContent to Ready   execmgr   3/11/2014 12:02:20 PM   6388 (0x18F4)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PHL00057",ProgramID="dotNet4.5", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l   execmgr   3/11/2014
12:02:20 PM   6388 (0x18F4)
MTC task with id {D7AF4308-9884-46F4-AC4F-77A105611E75}, changed state from 0 to 4   execmgr   3/11/2014 12:02:20 PM   5144 (0x1418)
Processing [{1CFD35A8-D941-4D59-B626-ACEE82D79F5A}, 0]: RemoveNotification   execmgr   3/11/2014 12:02:20 PM   6388 (0x18F4)
MTC signaled SWD execution request with program id: dotNet4.5, package id: PHL00057 for execution.   execmgr   3/11/2014 12:02:20 PM   5144 (0x1418)
Sending ack to MTC for task with id: {D7AF4308-9884-46F4-AC4F-77A105611E75}   execmgr   3/11/2014 12:02:20 PM   5144 (0x1418)
Executing program dotNET45.exe in Admin context   execmgr   3/11/2014 12:02:20 PM   5144 (0x1418)
Execution Request for advert package PHL00057 program dotNet4.5 state change from Ready to NotifyExecution   execmgr   3/11/2014 12:02:20 PM   5144 (0x1418)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PHL00057",ProgramID="dotNet4.5", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l   execmgr   3/11/2014
12:02:20 PM   5144 (0x1418)
Checking content location C:\Windows\ccmcache\y for use   execmgr   3/11/2014 12:02:21 PM   5144 (0x1418)
Successfully selected content location C:\Windows\ccmcache\y   execmgr   3/11/2014 12:02:21 PM   5144 (0x1418)
Executing program as a script   execmgr   3/11/2014 12:02:21 PM   5144 (0x1418)
Successfully prepared command line "C:\Windows\ccmcache\y\dotNET45.exe"   execmgr   3/11/2014 12:02:21 PM   5144 (0x1418)
Command line = "C:\Windows\ccmcache\y\dotNET45.exe", Working Directory = C:\Windows\ccmcache\y\   execmgr   3/11/2014 12:02:21 PM   5144 (0x1418)
Running "C:\Windows\ccmcache\y\dotNET45.exe" with 32bitLauncher   execmgr   3/11/2014 12:02:21 PM   5144 (0x1418)
Created Process for the passed command line   execmgr   3/11/2014 12:02:21 PM   5144 (0x1418)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramStartedEvent
   AdvertisementId = "PHL2005A";
   ClientID = "GUID:22C73C54-734C-4CA9-95F0-685A872C87AA";
   CommandLine = "\"C:\\Windows\\ccmcache\\y\\dotNET45.exe\"";
   DateTime = "20140311040221.195000+000";
   MachineName = "JREYES033W7";
   PackageName = "PHL00057";
   ProcessID = 6836;
   ProgramName = "dotNet4.5";
   SiteCode = "PHL";
   ThreadID = 5144;
   UserContext = "NT AUTHORITY\\SYSTEM";
   WorkingDirectory = "C:\\Windows\\ccmcache\\y\\";
   execmgr   3/11/2014 12:02:21 PM   5144 (0x1418)
Raised Program Started Event for Ad:PHL2005A, Package:PHL00057, Program: dotNet4.5   execmgr   3/11/2014 12:02:21 PM   5144 (0x1418)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PHL00057",ProgramID="dotNet4.5", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l   execmgr   3/11/2014
12:02:21 PM   5144 (0x1418)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PHL00057",ProgramID="dotNet4.5", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l   execmgr   3/11/2014
12:02:21 PM   5144 (0x1418)
MTC task with id {D7AF4308-9884-46F4-AC4F-77A105611E75}, changed state from 4 to 5   execmgr   3/11/2014 12:02:21 PM   5444 (0x1544)
Policy deleted for advertisement PHL2005A package PHL00057 program dotNet4.5   execmgr   3/11/2014 12:17:23 PM   7236 (0x1C44)
Policy was deleted or expired for running program dotNet4.5. Leave the program in STATE_RUNNING   execmgr   3/11/2014 12:17:23 PM   7236 (0x1C44)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PHL00057",ProgramID="dotNet4.5", actionType 45l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l   execmgr   3/11/2014
12:17:23 PM   7236 (0x1C44)
Policy arrived for parent package PHL00057 program dotNet4.5   execmgr   3/11/2014 12:19:21 PM   7236 (0x1C44)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PHL00057",ProgramID="dotNet4.5", actionType 6l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l   execmgr   3/11/2014
12:19:21 PM   7236 (0x1C44)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramOfferReceivedEvent
   AdvertisementId = "PHL2005B";
   ClientID = "GUID:22C73C54-734C-4CA9-95F0-685A872C87AA";
   DateTime = "20140311041921.964000+000";
   MachineName = "JREYES033W7";
   ProcessID = 6836;
   SiteCode = "PHL";
   ThreadID = 7236;
   execmgr   3/11/2014 12:19:21 PM   7236 (0x1C44)
Regards,
Jeff

[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramStartedEvent
   AdvertisementId = "PHL2005A";
   ClientID = "GUID:22C73C54-734C-4CA9-95F0-685A872C87AA";
   CommandLine = "\"C:\\Windows\\ccmcache\\y\\dotNET45.exe\"";
   DateTime = "20140311040221.195000+000";
   MachineName = "JREYES033W7";
   PackageName = "PHL00057";
   ProcessID = 6836;
   ProgramName = "dotNet4.5";
   SiteCode = "PHL";
   ThreadID = 5144;
   UserContext = "NT AUTHORITY\\SYSTEM";
   WorkingDirectory = "C:\\Windows\\ccmcache\\y\\";
   execmgr   3/11/2014 12:02:21 PM   5144 (0x1418)
Raised Program Started Event for Ad:PHL2005A, Package:PHL00057, Program: dotNet4.5   execmgr   3/11/2014 12:02:21 PM   5144 (0x1418)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PHL00057",ProgramID="dotNet4.5", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l   execmgr   3/11/2014 12:02:21
PM   5144 (0x1418)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PHL00057",ProgramID="dotNet4.5", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l   execmgr   3/11/2014 12:02:21 PM
5144 (0x1418)
MTC task with id {D7AF4308-9884-46F4-AC4F-77A105611E75}, changed state from 4 to 5   execmgr   3/11/2014 12:02:21 PM   5444 (0x1544)
Policy deleted for advertisement PHL2005A package PHL00057 program dotNet4.5   execmgr   3/11/2014 12:17:23 PM   7236 (0x1C44)
Policy was deleted or expired for running program dotNet4.5. Leave the program in STATE_RUNNING   execmgr   3/11/2014 12:17:23 PM   7236 (0x1C44)
Have you deleted the deployment or is the computer no longer member of the collection where the program is deployed to? Does dotNET45.exe run unattended without any user interaction?
Torsten Meringer | http://www.mssccmfaq.de

[Solved]"yaourt -Syua" no longer lists installed packages.....

When I run:
$ yaourt -Syu
/usr/bin/pacman -Sy
:: Synchronizing package databases...
2012-01-17 12:12:20 (23.4 KB/s) - saved “/var/lib/pacman/sync/archlinuxfr.db.part” [28637/28637])
$
Then run:
$yaourt -Syua
:: Synchronizing package databases...
2012-01-17 12:12:20 (23.4 KB/s) - saved “/var/lib/pacman/sync/archlinuxfr.db.part” [28637/28637])
acpitool: Orphan
clearlooksosx-icon-theme: Orphan
xecjk: Orphan
Foreign packages: \ 103 / 103
$
It no longer shows the installed packages list, just counting in one line "Foreign packages: \ 103 / 103" and exit without updating. Is this normal?
Last edited by hooluupog (2012-01-18 04:25:06)

mod action: Moving from Pacman & Package Upgrade Issues to AUR Issues, Discussion & PKGBUILD Requests.

How to install packages on client via VPN

Hello
I have a number of users that use laptops and mostly connect to the office network via an OSX VPN Server. I can see when they connect, copy files to them and control their screens.
I do not seem to be able to install packages to them. The ARD console goes through the motions but the package never gets to the remote end and is never installed.
Can anyone shed any light on this? From what I can tell this may be a multicast issue - if this is true how can I get the VPN server to route the multicast traffic, or alternatively how can I stop ARD from using multicast for these clients?
Any help appreciated. If I can not use the package installation system it will make managing these users quite difficult.
Kind regards
Jason
Mac OS X (10.4.9)

Hi Jason,
Have you found anything else that can't be done or is acting strangely using ARD with those connecting via VPN? Another question that comes to mind is the up and down speed of both your office's connection to the net and that of the clients connecting in. You said that you can copy files to them--does that work with large files as well? Have you tried copying the install package rather than installing it to see if that works?
I ask all of this because I've found in my support role with VPN clients, that viewing/controlling the screen, copying small files, chats, and alerts all work fine. But a large install package? I don't even bother. Sure, it works locally, but the upload speed of the company's internet connection isn't fast enough to do large copies or installs remotely. (Which is why I'm wondering about copying a large file.) I usually get a "Communication Error".
Power Mac G5 1.8GHz DP, 1.5GB RAM, Mac OS X (10.4.10)

[SOLVED] Unable to install packages in lxc container

tl;dr: lxc-console should be used for logging in, not lxc-attach. Also, I had to do some additional work to get the tty to work in systemd, and I plan to update the wiki soon.
I created a container using the following command:
# lxc-create -n test -t archlinux
Once created and configured, I started the container daemonized, and attached:
# lxc-start -n test -d
# lxc-attach --clear-env -n test -- su - root
However, I am unable to install any software packages because GPG isn't working properly
[root@test ~]# pacman -Syu openssh
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
multilib is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
Packages (3): ldns-1.6.17-1 libedit-20130601_3.1-1 openssh-6.5p1-2
Total Installed Size: 6.08 MiB
:: Proceed with installation? [Y/n]
(3/3) checking keys in keyring [###########################] 100%
(3/3) checking package integrity [###########################] 100%
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: libedit: missing required signature
:: File /var/cache/pacman/pkg/libedit-20130601_3.1-1-x86_64.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n]
error: ldns: missing required signature
:: File /var/cache/pacman/pkg/ldns-1.6.17-1-x86_64.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n]
error: openssh: missing required signature
:: File /var/cache/pacman/pkg/openssh-6.5p1-2-x86_64.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n]
error: failed to commit transaction (invalid or corrupted package (PGP signature))
Errors occurred, no packages were upgraded.
error: segmentation fault
Please submit a full bug report with --debug if appropriate.
The container config is as follows:
lxc.utsname=test
lxc.autodev=1
lxc.tty=1
lxc.pts=1024
lxc.rootfs=/var/lib/lxc/test/rootfs
lxc.mount=/var/lib/lxc/test/fstab
lxc.cap.drop=mknod sys_module mac_admin mac_override
lxc.kmsg=0
lxc.stopsignal=SIGRTMIN+4
#networking
lxc.network.type=veth
lxc.network.link=br0
lxc.network.flags=up
lxc.network.name=eth0
lxc.network.ipv4=10.10.209.2/24
lxc.network.ipv4.gateway=10.10.209.1
lxc.network.mtu=1500
#cgroups
lxc.cgroup.devices.deny = a
lxc.cgroup.devices.allow = c *:* m
lxc.cgroup.devices.allow = b *:* m
lxc.cgroup.devices.allow = c 1:3 rwm
lxc.cgroup.devices.allow = c 1:5 rwm
lxc.cgroup.devices.allow = c 1:7 rwm
lxc.cgroup.devices.allow = c 1:8 rwm
lxc.cgroup.devices.allow = c 1:9 rwm
lxc.cgroup.devices.allow = c 1:9 rwm
lxc.cgroup.devices.allow = c 4:1 rwm
lxc.cgroup.devices.allow = c 5:0 rwm
lxc.cgroup.devices.allow = c 5:1 rwm
lxc.cgroup.devices.allow = c 5:2 rwm
lxc.cgroup.devices.allow = c 136:* rwm
Has anyone else experienced this? I've searched the web for solutions to the GPG error, and most of them relate to GPG not working in a chroot because the right things don't exist in /dev. However, I was under the impression that lxc.autodev=1 would take care of this, and indeed /dev/pts, etc. all exist in the container.
Last edited by archtaku (2014-02-07 23:19:12)

x33a wrote:
Try
# pacman-key --refresh-keys
from within the container. Though, I do notice a segmentation fault, so I am not sure if it'll work.
I just did this, and the command succeeded:
gpg: refreshing 75 keys from hkp://pool.sks-keyservers.net
gpg: requesting key 5263801D from hkp server pool.sks-keyservers.net
gpg: requesting key FFF979E7 from hkp server pool.sks-keyservers.net
gpg: requesting key CDFD6BB0 from hkp server pool.sks-keyservers.net
gpg: requesting key 4C7EA887 from hkp server pool.sks-keyservers.net
... snip ...
gpg: Total number processed: 74
gpg: unchanged: 74
However, the installation still failed.
I was able to get pacman to install openssh by turning off signature verification. I then ssh'ed into the container, turned signature verification back on, and was able to install other packages just fine.
So the issue seems to be with how lxc-attach connects to the container. A temporary solution would be:
Add openssh to the list of packages installed when running lxc-create.
# lxc-create -n test -t archlinux -- -P vim,openssh
Attach to the container and run systemctl enable sshd.service, and set a root password
Detach, then ssh into container and go about your business.
However, I'd rather have the option of not using sshd on the container, and still be able to install packages, so I don't necessarily consider this problem solved yet.
Can anyone shed some light on what I might be doing wrong when I attach to the container?
Last edited by archtaku (2014-02-07 16:46:52)

We can able to add package and patch in Non-Golbel zone?

Hi Sun Gurus,
We have V890 server and it's configered zones.We are facing problem with package and Patch adding in Non-Golbel zone.
I want to confirm whether we can able to add package and patch in Non-Golbel zone?
Thanks in advance
Raja

If their sparse root zones, then you have to install the package and patch in the global zone. The non global zones will all pick them up automatically.
If you need to be able to install packages in only specific zones then you need to make them whole root zones.

After installing PSE 10 on OS X Lion, no longer able to select pictures from iPhoto library

I've downloaded and installed Photoshop Elements 10 on my MacBook Pro, which is running OS X 10.7.4. After installation and importing the photos from iPhoto, I noticed that I am no longer able to select images from my iPhoto library from other applications, such as Facebook, Address Book, etc. (ie; typically in a dialog to select a photo or image, simply browse to iPhoto library to get access to all Events, Albums, Faces, etc.).
This capability now seems to be broken even if I browse to the iPhoto Library using Finder. Showing Package Contents on the iPhoto Library reveals that all the images are there.
Any ideas on how to fix this? Drilling into the file structure of the PE Organizer is painful at best.

You assume too much. I am not mucking around with the iPhoto Library.
Here is an example of my problem:
Open Address Book
Select a Contact
Click Edit
Double Click the Photo icon
A dialog appears for me to "Choose" a photo
Click Choose...
Another dialog appears for me to browse to the photo that I would like to attach to that conract
I select my username under "Favorites", then expand the "Pictures" folder
When I click on iPhoto Library, I am no longer able to expand it and presented with the photos, events, faces, albums within it, but only get an icon for the iPhoto Library instead.
This is part of the way a Mac works, and is now broken. It exhibits this in Address Book and any other program, and it was working fine until I installed PSE 10.

Updated my mac to mountain lion 10.8.3 and now my app store, mail or facetime won't open. Also, I am not longer able to play videos through firefox. I tried downloading the combo for mountain lion and it refuses to install? Can anyone help me?

updated my mac to mountain lion 10.7.8.3 and now my app store, mail or facetime won't open. Also, I am not longer able to play videos through firefox. I tried downloading the combo for mountain lion and it refuses to install saying that I need to see developer. Whenever I try to open my appstore, mail or facetime it says that the programmes need to be installed and might not be compatible with this version of mac operating system. Can anyone help me?

It's not a bad install of Mountain Lion. I've had the same thing happen to me, but it affected not only Mail, but a variety of other programs including iPhoto and MS Office, where I had to delete preferences, caches, and reinstall the OS as well as the program itself. I'm still having issues with Mail, so I've gone to another program.
Everything was fine upon the initial install. I restarted my iMac about two weeks after the install, and that's when the issues began to happen. I've reinstalled Mountain Lion twice, but the same issues arise.
As I mentioned above, you'll need to figure out which preferences are causing the issue, then reinstall the program, as a fresh reinstallation will do you no good unless you wipe the drive completely.
Here's a thread that helped me with iPhoto:
https://discussions.apple.com/thread/4794375?start=0&tstart=0

After I downloaded and installed the latest iTunes upgrade (to 10.5.1), I am no longer able to download free app upgrades for the apps I have on my iPad/iPhone/iMac which i had previously purchased. Itunes tells me I "don't own the major versions".

After I downloaded and install the latest iTunes software upgrade (to 10.5.1), I am no longer able to download free upgrades to the apps on my iPhone or iPad.
The App Store just says I "don't own the major versions", which of course is nonsense. It seems as if Apple's iTunes/App Store has deleted my download history. Any suggestions?
Regards,
Bruce

Actually It doesn't. It says he's on a MacBook. I don't know all the different types of Macs. I was having a ton of problems with iChat. I opened DMZ to my computer, knocked down all firewalls etc and left everything exposed, still with bad results. A few weeks ago my power supply went out on my D-Link. I bought a linksys. Since I'd left all firewalls off I figured it couldn't be the router. I power cycled everything n the netork, still no luck. Today I bought a universal Power supply and started up my D-Link Router. Everything worked perfectly. My wifes computer - a laptop running Tiger worked fine with the Linksys and did my machine before the Leopard upgrade. Now that I've got the D-Link online everythings working.
Message was edited by: graphico
Message was edited by: graphico

HT1923 got notification that new Itunes version is available, once i installed it I'm no longer able to open Itunes, I get the error message, Not installed properly. Reinstall itunes. Error 7(Windows error127),

got notification that new Itunes version is available, once i installed it I'm no longer able to open Itunes, I get the error message, Not installed properly. Reinstall itunes. Error 7(Windows error127), I tried repairing itunes, Apple Aplication support, apple mobile device support, bonjour and I even uninstalled and reinstalled Itunes and still problem exist, any solution?
I have windows 8

I got this message today too. I understand that my music is stored on my computer, however I want to be certain that if I re-install iTunes, it won't erase my library....playlists, playcounts, checked songs, etc.

I installed the new version of iTunes today. It's 12.1.1. After completing the installation, including restarting my computer, I was no longer able to use Windows Internet Explorer. Has anybody else experienced this? If so, how did you fix Explorer?

I installed the new version of iTunes today. It's 12.1.1. After completing the installation, including restarting my computer, I was no longer able to use Windows Internet Explorer. Has anybody else experienced this? If so, how did you fix Explorer? I was using Explorer 11 and Windows 7, installed on an HP Pavilion g series

Never heard of that being caused by installing iTunes. Try asking on a Windows forum. This isn't a problem with iTunes or any other Apple product. If you believe it is, uninstall iTunes. If the problem persists, you'll have to seek advice on a Windows forum or contact Microsoft for support.

After installing an update I am no longer able to hear sound out of my speakers. A red light comes on where the headphone jack is. I have already attempted to trip to switch with a wooden toothpick in the headphone jack but have not had luck.

after installing an update I am no longer able to hear sound out of my speakers. A red light comes on where the headphone jack is. I have already attempted to trip to switch with a wooden toothpick in the headphone jack but have not had luck.

Have you gone into system prefs nad made sure that the headphone port is set to audio out. And not audio in.
Also make sure that you are selecting built in speakers for your audio output.
If that does not fix it try doing a Pram reset.
Shut your mac down.
Press the startup button.
Hold down the following keys. Command Option P and R. Wait till you hear the chime 2 times. Then let go. See if that fixes it.

Is my iMac now useless as i have installed lion and i am no longer able to run cs2 photoshop and illustrator as this is all i use my mac for they should make this clear before buying it i can't afford the latest version of cs2

is my iMac now useless as i have installed lion and i am no longer able to run cs2 photoshop and illustrator as this is all i use my mac for they should make this clear before buying it i can't afford the latest version of cs2 and cant believe what a waste of money it is.

The newest version of CS2 is CS5. And it was made very clear that these applications would not run in Lion. Not only by Apple, but on all sorts of communities and websites. It has been a long time coming - PowerPC apps were outdated six years ago. Lion does not support Rosetta, and therefore not PPC apps.
you have to options. Go back to Snow Leopard or upgrade your software. (MS Office 2004 and older will not run either).
Cheers

I am not able to install my 'Complete National Geographic' cd on my Mac mini which runs Lion OS. The error message I get says 'Can't open installer as classic environment is no longer supported' can some one suggest a solution

I am not able to install my 'Complete National Geographic' cd on my Mac mini which runs Lion OS. The error message I get says 'Can't open installer as classic environment is no longer supported' can some one suggest a solution.

It means the software is PowerPC code, which is no longer supported in Lion. Your choices are to go back to Snow Leopard, run Snow Leopard Server in a virtual machine within Lion, see if the vendor has an updated version of National Geographic that will run on an Intel Mac, or run the software on an older Mac separately.

No longer able to install packages

Similar Messages

Maybe you are looking for