No longer able to locate the Twitter icon anywhere on my Torch 9800
I have Twitter version 4.0.0.15 installed on my Torch 9800 and have been using Twitter frequently for the past six months or so. For some reason I can no longer find the Twitter icon anywhere. Not in "All", "Favourites", "Frequent" or Downloads. I have tried uninstalling, re-installing, pulling the battery for a reboot (both with the Blackberry turned ON as well as with it OFF), all to no avail. This just started the other day. At about the same time, or shortly before this problem started, I upgraded the News/sports app "Canoe". Thinking that it might have been this upgrade that is causing the problem, I currently have Canoe uninstalled and went through the same procedures but have been unable to correct it.
Has anyone had a similar problem? If so, how did you correct it? I miss using Twitter.
Thanks much!
Solved!
Go to Solution.
1. On your homescreen, press the Menu key > SHOW ALL, so that SHOW ALL is checked.
2. Look in EACH folder on your device... Applications, Instant Messengers, Downloads, etc.
If you still don't see it, look at Options > Device > Applications. Do you see it listed there?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
I cannot locate the Homepage icon anywhere in Firefox 4.0 Beta
Unable to return to Homepage without existing Firefox 4.0 Beta.
Any sugestions?* If, on Windows, the menu bar is hidden then press F10 or hold down the Alt key, that should make the "Menu Bar" appear
* Make sure that you have the "Navigation Toolbar" visible: "View > Toolbars"
* If items are missing then see if you can find them in the "View > Toolbars > Customize" window
* If you see the missing item in the Customize window then drag it back from the Customize window onto one of the toolbars.
* If, in "View > Toolbars > Customize", you do not see that item then click the "Restore Default Set" button
See also:
* http://kb.mozillazine.org/Toolbar_customization
* http://kb.mozillazine.org/Corrupt_localstore.rdf -
On both Mini Mac and iMac 27" I am no longer able to utalize the Startup Disk icon in System Preferences; the Windows 8 on Bootcamp partition works fine if I close the Mavericks OX and select the Windows partition at bootup from the hard drive. My question is why don't the icon in System Prederences work anymore since I upgraded to Mavericks. Also, Users & Groups, Printers & Scanners icons no longer work either.
On both Mini Mac and iMac 27" I am no longer able to utalize the Startup Disk icon in System Preferences; the Windows 8 on Bootcamp partition works fine if I close the Mavericks OX and select the Windows partition at bootup from the hard drive. My question is why don't the icon in System Prederences work anymore since I upgraded to Mavericks. Also, Users & Groups, Printers & Scanners icons no longer work either.
-
No longer able to open the application on my MacBook Pro since upgrading to FaceTime 1.0.5 (170). The operating system is OSX 10.6.8.
My problem opening FaceTime after the upgrade is now solved. I didn't pay enough attention when prompted to decide where to store the application upgrade and as a consequence the computer created another "Applications" folder within the existing one. When I subsequently clicked on the icon on the dock to open the application the computer couldn't find the software.
Makerfield2 -
After upgrading to ios 6.1, I experienced the following problem: I am no longer able to read the magazine I subscribed (The New Yorker) if I don't have access to internet. If the iPad is on FlightMode I can't read the magazine or the books in iBooks. Can you help me?
I am having the same problem. I have a 2nd generation ipad wi-fi only. All was working great until I upgraded. NONE of my downloaded magazines or rss-feeds are accessible. For the magazines, their icons show up on the "shelves" but once you click on one it wont even take you to the "issues" i have downloaded. it jumps back to the shelf page.
-
Imac is no longer able to open the Configuration file
Hi ,
I have an imac ( ilamp) 20' connected to ADSL, via Netopia Router which is connected to the Airport extreme connected to imac, for the PB Aluminum Tiger 10.4.5. we both can connect. PB can print via imac/printer.
The imac is no longer able to open the Configuration file, when i enter the pswd which is correct, i get the message "The Airport Admin. Utility was unable to read the configuration of the selected base station an error occurred while reading the configuration "
My Beau updated Airport to V5.7, this is the first time since the update I've tried to access the conf. file for the imac which i have done numerous times prior.
I have a new base station Ip address 254.128.0 in Airport Utility Admin, on the imac which does not reflect my network settings anywhere, and is not what it use to be, i think, it was one value different than the PB.Base station IP. I do not know how it changed neither one of us changed it.
I tried using the Airport Setup assistant (imac), I received this message:
"Appropriate Airport hardware was bot found on this computer,if you recently
Installed, an Airport card,please shut down your computer$ make sure the card is properly istalled."
The imac does not have a card, nor do i think it needs one.
I would like to be able to at least open the configuration file.
Thank you for reading my post.
Eme
Power PC G4 (3.3) iMac♥ Flat Panel 10.3.9 & 15 Alum.PowerBook Tiger Mac OS X (10.4.4)Hi Kes, a star for the company !
I made an error on my first post I have a Netopia modem, Airport router.
And so it remains, i guess that there must be an easy answer somewhere
that I am missing that I/we should read, some direction to that would be helpful, and I would be very appreciative.
As I said the password had been set, and it is not an issue of that being forgotten, i wondered if it was changed back to "public" tried, not it.
particular because everytime the imac wakes one of the folders on ( no one else in office just me and boyfriend and it is his work folder he has a copy on the PB.( the folder on desk top has been clicked on, the one with sensitve info, i have backed the folder up and secure trashed it, just in case some security issue hacking has taken place, thats closing the barn door after the fact.
Good luck,w/ this Q.
regards Eme
Power PC G4 (3.3) iMac ♥ Flat Panel 10.3.9 & 15 Alum.PowerBook Tiger Mac OS X (10.4.5) -
No matter where I go, as soon as I turn on the Internet on my new Mac Book Pro, everyone else is no longer able to use the Internet. How can I fix this? I received it as a gift for college, but its hard to do research when everyone constantly yells at me to get off because they can no longer continue what they're doing.
<Edited By Host>" how can I sync my iphone to my mac book without losing all the music and pictures on it?"
You cannot. Copy everything you want form the old computer to the new one, then sync it.
it basically says you have to erase your iphone to sync to a new itunes!
Correct Iphone will sync, or manually manage, with one and only one computer/library at a time. Syncing, or manually managing, to another will indeed erase the current content. -
In camera raw, I am no longer able to use the adjustment brush. This is a recent phenomenon.?
In camera raw, I am no longer able to use the adjustment brush. This is a recent phenomenon.
Well, it worked fine for me as well for the past couple of years. I had not had any problems using it for the past few years. I use a Mac OS X Yosemite. As far as I can tell nothing had changed. I had not added any new updates, and a week ago the adjustment brush in camera raw simply ceased working. Everything else in camera raw works. However, the adjustment brush is a critical tool. I have checked my permissions, and even repaired my permissions with no results. Of course I have also tried several restarts to no avail.
-
I'm no longer able to select the file size when emailing a photo. How can I solve this? iPhone 4S with iOS 7.1.1. Thanks a lot.
Yeah - I tried that, several times; each time I get "iTunes is restoring the software on this iPhone" and after about 30 minutes the screen on the phone lights up again with the same screen I had before. After that ... nothing.
-
No longer able to access the "Advanced" options via the Inspector Chart Series Advanced sequence
In iWorks9 Numbers in attempting to add trendline to a line chart I am suddenly no longer able to access the options under "Advanced" via the Click On Chart Line>Inspector>Chart>Series>Advanced sequence because the triangle button adjacent to Advanced is not highlighted and does not open up when clicked upon. Ideas?
well ... I spent some time this afternoon repairing disk permissions, checking application preferences, etc. and don't think I found anything directly related to this problem but after a few hours I returned to Numbers and lo and behold something changed and everything is working fine ... and I have no idea what was the cause and what was the fix but I'll take it. Heisenberg was right.
-
Hi, Although I had itunes downloaded on my pc & been using for a while now, today I've been prompted to download itunes again. This has been successfull except that 65 songs that I had previously in my library are now no longer able to play, the message informes me that the original files could not be found. Yet these songs are still on my ipod after being syncronised and I can play them on my ipod. Please advise how I can find the original files on my pc.
Thank you
CarolI would copy over the entire thing if you have room. With iTunes 10.4 though, you can download any previous iTunes purchases you have made in the past with your current iTunes account. While in iTunes, look at the left hand side of your screen and select "Purchases" and look at the bottom right corner of the screen and select "Download Previous Purchases". If you have an iPhone, iPod and/or iPad...you can do the same thing from each device. Nice new feature...just remember that those ripped CDs need a back-up!!! Enjoy...
-
I am not able to open the settings icon from my old iPAD. When I try to select the settings icon it looks like it's about to launch and open however; it will not stay open. I am trying to transfer all my data from my old iPAD to my new 4th gen iPAD.
Try a soft reset - press the home and power bottons and keep them pressed until the Apple logo comes on. Then see if you can access Settings.
-
I have realised over time I have created multiple accounts. I have bought music on my Iphone and am not able to locate the account that I made most of my purchases on. I have bank statements on the purchases but don't know how to contact someone in Itune to help me. PLEASE
I don't have the app adn no expereince with it, but it appears basec on teh app description you may need it installed on your MAC as well to download the files.
You might find help on the vendors website: http://www.nfinityinc.com/index.html -
Help! I recently upgraded to OS 10.9.4 from 10.6.8, and now when I want to send an email to a group in my contacts I am no longer able to select the group as a whole. I have to select each address individually. This can't be right. With 10.6.8 I used to be able to double click on the name of the group and they would all be selected. I've also noticed that my address book is now called "contacts." Thanks in advance for your help.
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
computer and after the chime press and hold down the OPTION key until the boot manager
screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo). -
I'm no longer able to use the projector VPL-ES4 with win7, he accuses error frequency
I'm no longer able to use the projector VPL-ES4 with win7, he accuses error frequency.
Working at a university here in Brazil Unicamp.
Here we have several projectors model VPL-ES4, we were using this projector with win7 however a few days they all stopped to show the image of computers accusing problem in frequency, we made all the alternatives so that One can be reestablished TRANSMISSION signal however all were in vain, reading in many forums found equal to our cases and the solution presented was to use a computer with win98 and it really worked, but with the end of support for this version of the system we are failing to use it, I wonder how we can solve this problem and why even this ocrrendo.
I thank you in advance for help and attention
Rafael Marquesarchie0 wrote:
Yes. NVIDIA+CRT+VGA cable = bad EDID.
Here's what you can do. Fully remove the xorg.conf file. Regenerate them using nvidia-xconfig, Open the nvidia's GUI as root and just click "Save configuration", or something among those lines. Google your monitor's manual and find the RIGHT vertical and horizontal sync frequency ranges. After setting them in your xorg.conf log-out and log-in again. Go to the nvidia settings gui, you should be able to use a higher resolution.
I've tried this a few times, but always end up with a "Signal out of range". I think the trick is finding the correct ranges. My monitor is a Soyo Topaz S 24", and I can't find any official manual or specs online. What I have found is this:
http://www.thinkcomputers.org/old/index … ews&id=733
That review indicates:
Frequency: Fh: 30 kHz - 80 kHz; Fv: 50 Hz - 75 Hz
So I set:
HorizSync 30-80
VertRefresh 50-75
Signal out of range, which is annoying because in order to fix it I either have to reboot using a live CD, mount the drive, or ssh into it. Whoever started the trend of disabling ctl alt backspace to kill an xsession is not my friend...
Some other forum posts about this monitor indicate that there may have been two variants, but I can't find a different set of specs.
Last edited by vor_lord (2012-09-25 05:48:24)
Maybe you are looking for
-
Data does not show up in 0PUR_C01
I deleted the set up table for '02' in LBWG , I executed for Industry and transaction key in SBIW under Purchasing . I extracted in RSA3 for 2LIS_02_ITM and it brings 1003 records. I loaded this in BW into 0PUR_C01 . The load was successfull . But 0
-
Connect host win 8.1 pro to vritual domain
Hi, on my laptop I am running Win 8.1 pro (machine_1) using Hyper-v I created 3 (gen2) VM running Win2012 servers (DC,node1 node2 they use Internal Virtual Switch) 1.DC is domain controler, I created domain AG and added node1 and onde2 to domain 2.
-
No audio from movie on the burned DVD
This is the 5th DVD I've made with the "Chapters" Theme on IDVD 6. All 5 were created as movies from various clips in IMovie and shared with IDVD. The other 4 came out fine, but on this 5th one, everything works fine on the computer in IMovie and IDV
-
How to call the transaction VL02N in the userexit.
Hi all, I am doing code in the userexit SAVE_DOCUMENT_PREPARE of the include MV50AFZ1. I'm doing some validations there. If the validations fail, i should not allow the user to post the goods. Instead i need to make the user to go to the screen
-
Changing Webi Report Data Provider With Prompt
Hi All, I am trying to change Data Source of a Webi Report using RESTful Web Services. Fo this I have referred code on Changing Dataproviders for a Webi Report using RESTful Web Services Post. I am able to change data source for Webi Reports without