No longer able to make copies of CDs?

I just attempted to pull cuts off a music CD in the CD drive, drag-and-dropping them into a folder on the desktop as I've always been able to do in the past with ease. All of a sudden this is impossible to accomplish. Checking info indicates I "can only read" the CD. As it has previously not been a problem, I'm not sure if that was always the permissions/sharing message.
I'm not sure whether this is a new development with 10.5.6 or with the more recent iteration of iTunes, but something has decidedly changed for the worse.
Anyone know if there's some way around this lovely SNAFU?

Hi Baltwo,
AFAIK there is one possibility to burn bootable CDs in Tiger, shareware called:
Clone X2, try here http://www.tri-edre.com/english/cloner.html
There was also a freeware solution, BootCD but effectively I don't think it's compatible with Tiger yet, just keep checking because they will probably release an update.
Cheers,
AlBook 15" 1Ghz - 768mb Ram Mac OS X (10.4.4) PowerMac G3 Beige, iMac 400Mhz, iPod 20Gb (Touch Wheel)

Similar Messages

I am no longer able to make the images on my screen enlarge by expanding thumb

I am no longer able to make my font & screen images enlarge by pinching thunb & indext finger together on the mouse, then opening them. Have I changed my preferences accidentally? Any suggestions?

MacBook Pro

How to make copies of cds?

Hi,
How do I make copies of cds in tiger?
Do I need some 3rd party software?
Thanks.

Hi Baltwo,
AFAIK there is one possibility to burn bootable CDs in Tiger, shareware called:
Clone X2, try here http://www.tri-edre.com/english/cloner.html
There was also a freeware solution, BootCD but effectively I don't think it's compatible with Tiger yet, just keep checking because they will probably release an update.
Cheers,
AlBook 15" 1Ghz - 768mb Ram Mac OS X (10.4.4) PowerMac G3 Beige, iMac 400Mhz, iPod 20Gb (Touch Wheel)

I called to enroll in a verizon discount plan offered by my wife's employer, as we were finishing that up online, we were no longer able to make calls. We are able to text, however.   Has anyone else had a problem like this?

One of our phones received 240 voice mails from Verizon! I called support and they opened a ticket, the support guy was helpful and tried a bunch of stuff, but he couldn't figure it out and opened the ticket, etc., and told me it would probably be fixed in a couple of hours and that I'd hear from them.   That was last night.   I called this morning and another rep told me that I probably wouldn't hear anything until Monday.
The guy last night said they things went well during the storms on the East Coast for the network, but that there is something that is causing problems "rolling westward" since then.   I am in western Colorado.   Anyone else having any trouble?

We were told by the rep that we had to do two different orders so we did them one at a time with him on the phone walking us through it. I'm not sure what numbers are the actual order numbers because it seems the order number on the one phone I did recieve was different from the number in the email. The "order numbers" on the two emails were (removed) and I think were stated as "online order number". The whole thing was just so dissapointing. Spending all that time on the phone and my pc (on hold waiting for a rep, having the rep try the order, walking us through the order), my wife thinking she was finally getting a new phone that worked, etc, and finding out TWO days later?? I actually kind of felt bad for the rep I talked with yesterday because he probably gets beat on all day long if this kind of thing happens often, which from the posts, seems like it does. Of course I was less than pleasant with him struggling to understand what had happened and what could be done about it. If something can be done it would be appreciated. A CS rep can speak with me as well personally on the (951) number if they wish. Thanks.
"You can not do a kindness too soon, for you never know how soon it will be too late" R W Emerson
Private info removed as required by the Verizon Wireless Terms of Service
Message edited by: Admin Moderator

SIP Conversion - No longer able to make modem calls

We are working to convert our voice network off of PRI's and on to SIP Trunks.
Call Flow:
ITSP—SIP—CUBE—H323—CUCM—H323—Branch Router(2911 or 2811)—Analog Device (Cash Advance Machine) on FXS port.
All locations that have converted to SIP are now unable to connect to the analog toll free number that the analop Cash Advance Machine Dials. Getting the following error: SIP/2.0 488 Not Acceptable Media. Debugs are below for CUBE device. We have the dial peers set at the branch level to send G.711. Within CUCM we have the region settings at
Factory Default lossy
64 kbps (G.722, G.711)
384
As you cas see in the logs it is still coming in as below and should probably be G.711:
a=rtpmap:4 G723/8000
a=ptime:30
a=rtpmap:18 G729/8000
Can anyone suggest why the codec is being compressed? I assume this is why the call setup is failing.
Thanks for the help!
**I have also attached a file for CUCM debug. Calling Number = 317-596-8401 Called Number = 800-741-3737
Here are some debugs ran:
Feb 3 15:53:55.821 cst: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/TCP 172.1.1.1:5060;branch=z9hG4bK593e211460ba5
From: "7652847084" <sip:[email protected]>;tag=873207~9e0b435f-333c-412b-8c59-6a746bd381e5-57091540
To: <sip:[email protected]>
Date: Mon, 03 Feb 2014 21:53:55 GMT
Call-ID: abf1a100-2f010ff3-1e66f-b8112ac@
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
User-Agent: Cisco-CUCM9.1
Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY
CSeq: 101 INVITE
Expires: 180
Allow-Events: presence, kpml
Supported: X-cisco-srtp-fallback,X-cisco-original-called
Call-Info: <sip:172.1.1.1:5060>;method="NOTIFY;Event=telephone-event;Duration=500"
Cisco-Guid: 2884739328-0000065536-0000081835-0193008300
Session-Expires: 1800
P-Asserted-Identity: "7652847084" <sip:[email protected]>
Remote-Party-ID: "7652847084" <sip:[email protected]>;party=calling;screen=yes;privacy=off
Contact: <sip:[email protected]:5060;transport=tcp>
Max-Forwards: 70
Content-Type: application/sdp
Content-Length: 275
v=0
o=CiscoSystemsCCM-SIP 873207 1 IN IP4 172.1.1.1
s=SIP Call
c=IN IP4 10.200.130.53
b=TIAS:8000
b=AS:8
t=0 0
m=audio 18874 RTP/AVP 18 4 101
a=rtpmap:4 G723/8000
a=ptime:30
a=rtpmap:18 G729/8000
a=ptime:20
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
Feb 3 15:53:55.821 cst: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 488 Not Acceptable Media
Via: SIP/2.0/TCP 172.1.1.1:5060;branch=z9hG4bK593e211460ba5
From: "7652847084" <sip:[email protected]>;tag=873207~9e0b435f-333c-412b-8c59-6a746bd381e5-57091540
To: <sip:[email protected]=65597134-9EC
Date: Mon, 03 Feb 2014 21:53:55 GMT
Call-ID: abf1a100-2f010ff3-1e66f-b8112ac@
CSeq: 101 INVITE
Allow-Events: telephone-event
Warning: 304 32.2XX.X.XX "Media Type(s) Unavailable"
Reason: Q.850;cause=65
Server: Cisco-SIPGateway/IOS-15.2.4.M5
Content-Length: 0
Feb 3 15:53:55.821 cst: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
ACK sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/TCP 172.1.1.1:5060;branch=z9hG4bK593e211460ba5
From: "7652847084" <sip:[email protected]>;tag=873207~9e0b435f-333c-412b-8c59-6a746bd381e5-57091540
To: <sip:[email protected]>;tag=65597134-9EC
Date: Mon, 03 Feb 2014 21:53:55 GMT
Call-ID: abf1a100-2f010ff3-1e66f-b8112ac@
Max-Forwards: 70
CSeq: 101 ACK
Allow-Events: presence, kpml
Content-Length: 0
Message was edited by: Jake Riecken

In Skype open Tools -> Options -> Advanced settings. At the bottom of this screen you should see a menu item saying “Manage other programs access to Skype”. Click on this menu. Do you see any applications listed there?

This new iOS 6.1 is a disaster my iPad is no longer able to make a correct connection to the wifi. I can only consider abandoning apple altogether!

My iPad2 connects to the 3G but does not connect to the wifi. It sees my wifi router but it does not connect to it. The problem all started with iOS upgrade to 6.1. Wifi is THE most important component of an iPad getting it wrong is UNFORGIVABLE. If this does not get fixed very soon, Apple can kiss my loyalty bye bye.

The problem has appeared with iOS 6.1 update. I have tried rebooting the iPad, forgetting the wifi network etc... I have numerous devices connected to the router through wired LAN and wifi. All of them were working properly.
The iPad appeared to have problems connecting to the DHCP server and was showing an Unusual IP address starting with 169 rather than the normal range of 192.168.0.xxx served by my router. In the end rebooting the router appeared to have fixed the problem for now, however I will wait to see when the lease expires...
One could establish that the problem is with the router, however the problem coincided with the upgrade to iOS6.1 and no other devices had any problem.

I currently do not remember the answer to my security questions and my rescue email is no longer active. How will I be able to make purchases without knowing either?

I currently do not remember the answer to my security questions and my rescue email is no longer active. How will I be able to make purchases without knowing either?

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Is my iMac now useless as i have installed lion and i am no longer able to run cs2 photoshop and illustrator as this is all i use my mac for they should make this clear before buying it i can't afford the latest version of cs2

is my iMac now useless as i have installed lion and i am no longer able to run cs2 photoshop and illustrator as this is all i use my mac for they should make this clear before buying it i can't afford the latest version of cs2 and cant believe what a waste of money it is.

The newest version of CS2 is CS5. And it was made very clear that these applications would not run in Lion. Not only by Apple, but on all sorts of communities and websites. It has been a long time coming - PowerPC apps were outdated six years ago. Lion does not support Rosetta, and therefore not PPC apps.
you have to options. Go back to Snow Leopard or upgrade your software. (MS Office 2004 and older will not run either).
Cheers

I no longer am able to make prints. Error message is:"No Available Themes"

I no longer am able to make prints. Error message is:"No Available Themes"--"There were no themes located. Until at least one theme has been installed, this feature will be unavailable." I did have to reinstall my original software when the Genius Bar erased everything off my computer. I am not sure if I tried to make a photo print right after that occured--at least till now.

Appearen tly the install did not complete - try this discussion
LN

Imac is no longer able to open the Configuration file

Hi ,
I have an imac ( ilamp) 20' connected to ADSL, via Netopia Router which is connected to the Airport extreme connected to imac, for the PB Aluminum Tiger 10.4.5. we both can connect. PB can print via imac/printer.
The imac is no longer able to open the Configuration file, when i enter the pswd which is correct, i get the message "The Airport Admin. Utility was unable to read the configuration of the selected base station an error occurred while reading the configuration "
My Beau updated Airport to V5.7, this is the first time since the update I've tried to access the conf. file for the imac which i have done numerous times prior.
I have a new base station Ip address 254.128.0 in Airport Utility Admin, on the imac which does not reflect my network settings anywhere, and is not what it use to be, i think, it was one value different than the PB.Base station IP. I do not know how it changed neither one of us changed it.
I tried using the Airport Setup assistant (imac), I received this message:
"Appropriate Airport hardware was bot found on this computer,if you recently
Installed, an Airport card,please shut down your computer$ make sure the card is properly istalled."
The imac does not have a card, nor do i think it needs one.
I would like to be able to at least open the configuration file.
Thank you for reading my post.
Eme
Power PC G4 (3.3) iMac♥ Flat Panel 10.3.9 & 15 Alum.PowerBook Tiger Mac OS X (10.4.4)

Hi Kes, a star for the company !
I made an error on my first post I have a Netopia modem, Airport router.
And so it remains, i guess that there must be an easy answer somewhere
that I am missing that I/we should read, some direction to that would be helpful, and I would be very appreciative.
As I said the password had been set, and it is not an issue of that being forgotten, i wondered if it was changed back to "public" tried, not it.
particular because everytime the imac wakes one of the folders on ( no one else in office just me and boyfriend and it is his work folder he has a copy on the PB.( the folder on desk top has been clicked on, the one with sensitve info, i have backed the folder up and secure trashed it, just in case some security issue hacking has taken place, thats closing the barn door after the fact.
Good luck,w/ this Q.
regards Eme
Power PC G4 (3.3) iMac ♥ Flat Panel 10.3.9 & 15 Alum.PowerBook Tiger Mac OS X (10.4.5)

Whenever I leave the main VI screen, the data is no longer able to be read.

I have a VI that I have used on and off on a test stand of mine for a year and a half. Yesterday, I ran it for the first time in about a month, and the VI had developed a peculiar problem. Whenever I leave the main VI screen and go back to it, data is no longer able to be read. By "leaving the main VI screen" I mean bringing up another Windows program into the foreground, or switching to the diagram screen of the VI I'm running, or even using one of the buttons on the main VI to bring up a sub VI screen. If I stop and then restart the VI, then everything is fine again. All data is read perfectly for hours on end until I leave the screen and then it goes nuts.
I actually ha
ve 4 boards that are being read by the program, and all of the inputs from one of the boards go haywire in this way. The inputs from the other three boards are always fine, and all inputs from the one board always aren't. The inputs include both pressure transducers and thermocouples. I also want to stress that the program worked fine for a year and a half until yesterday. Now, it doesn't. The board that has problems is an SCXI-1102, if that makes a difference, but I really get the impression that it is a software problem.
I originally thought it might be that the sub VIs had been changed in such a way as to not allow them to close properly except that the problem persists even when I simply switch back and forth between the diagram and front panel. In this case, I haven't touched anything in the program! I also thought that there might not be enough disk space on the computer, so I just cleared 100 Meg off my hard drive yesterday, but the problem persists. Does this problem
sound familiar to anybody?

Interesting. I thought about posting the same answer, because I, too have had the same experience with video drivers. I wasn't sure if this was a problem that anybody else was having, but evidently it is.
If you dig deep down into LabVIEW manuals, it does make a suggestion to drop the colors to as few as you need. My driver was having problems with 16 million colors, so I dropped it to 256. All my problems disappeared when I did this, too.
Mark

IMac Desktop no longer able to read scanned documents.

I think because of Apple's keychain, I am no longer able to read a document that I have scanned to my computer from my HP Printer/Copier/Scanner. HP is able to scan and I am able to save it to my files, however, when I try to open my document, I can only view lines and not my document or photo image.
Does anyone know how to remedy this problem? Please, Please! Thank you in advance.

The HP scans both the document or photo image to my computer.
I can view the image (both document or photo image) on my iMac computer in HP Scans.
When I try to save it to my computer file as PDF, Jpeg, etc, (I've tried all) it will be located in the correct Folder that I sent it to, however, when I open the saved file, the image is just lines.
There is an option to Add the Image to iPhoto Library. It does send it to iPhoto, however, when you want to view the image, it's just lines, as it is when I try to open the file from the Folder I mentioned above.
i get an error prompt when i want to save the PDF file: "An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only." I do not know where i can fix this.

HT5225 What about my mail? I was told I could still keep my email account but I am no longer able to download my emails.

I was told I could still keep my email account even if my system wasn't up to a wholescale iCloud upgrade but I am no longer able to download my emails to my account. I can still get them on my iPod but not on my laptop. How do I make the transition?

How much mail are we talking about here? Roughly how many messages, and roughly how many gigabytes of mail?
Who is the mail provider? Is this a local provider on a local network, or one of the "free" providers, or something from your ISP?
Do you have free disk space on your OS X system here, or is it possible that your disk is getting full?
As for the usual diagnostics for problems with Mail.app, launch Mail.app and select the Connection Doctor from the Window menu, let it run, select More Details, and re-run the tests. Expunge any personally-identifying information and post the results here, if they don't make the trigger clear.
You can also try a mailbox repair pass; there's a Rebuild option in the Mail.app menus.
If the downloads are failing, then the usual trigger is the IMAP or POP password setup; there are two entirely seperate connections and two separate credentials and such; the send path (SMTP) and the receive (IMAP or POP) path. Usual triggers for problems are changes to the mail servers involved, or the mail ports, or the credentials needed; I've seen vendors change each of those, and forget to mention it to their users.
That OS X version is extremely old. (I don't have anything nearly that old to check the details fo the setup of that version; 10.6.8 is the oldest OS X version I have handy.)

No longer able to delete photos

To make it easier to access the iPhoto library from multiple users on our computer, I moved the iPhoto Library to /Users/Shared/Pictures and set up permissions so that only the owner has write permission and other users are read-only (we had to do this to sync photos to multiple iPods; sharing via network doesn't allow this). However, despite the library and all subdirectories and files being owned by the user with write permission (and read permission, and execute permission for directories), that user is no longer able to delete photos in iPhoto. Whenever that user tried to delete a photo, iPhoto just beeps.
This seems strange. Why should the library directory location matter? All that should matter is file permissions, and that user has "rw" for ordinary files and "rwx" for directories. So, what's causing this trouble?

As Terence mentioned the Shared folder just doesn't work anymore. Here's Apple's document on sharing a library between multiple users: iPhoto: Sharing libraries among multiple users. The disk image method does work and you can set it up in everyone's account preferences to automatically mount then they log in. It would act just like an external HD. You would have to make sure to size it to accommodate growth in the library for some time to come.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

HT204406 Hi, Although I had iunes downloaded on my pc & been using for a while now, today I've been prompted to download itunes again. This has been successfull except that 65 songs that I had previously in my library are now no longer able to play, the m

Hi, Although I had itunes downloaded on my pc & been using for a while now, today I've been prompted to download itunes again. This has been successfull except that 65 songs that I had previously in my library are now no longer able to play, the message informes me that the original files could not be found. Yet these songs are still on my ipod after being syncronised and I can play them on my ipod. Please advise how I can find the original files on my pc.
Thank you
Carol

I would copy over the entire thing if you have room. With iTunes 10.4 though, you can download any previous iTunes purchases you have made in the past with your current iTunes account. While in iTunes, look at the left hand side of your screen and select "Purchases" and look at the bottom right corner of the screen and select "Download Previous Purchases". If you have an iPhone, iPod and/or iPad...you can do the same thing from each device. Nice new feature...just remember that those ripped CDs need a back-up!!! Enjoy...

No longer able to make copies of CDs?

Similar Messages

Maybe you are looking for