No longer able to select speaker type in Surround Mixer (Audigy Platinum Win XP P

Hi, all. I have an Audigy Platinum. Normally I have no issues using my 5. speakers with this card; however, today I noticed my sound was "tinny" and the reason is that the surround mixer is locked on Headphones. I cannot click the arrow to change it to 5. surround or anything else for that matter. I've gone into Control Panel and unchecked the mute other speakers when headphones are plugged in option, but that hasn't seemed to help. Any other ideas?Thanks in advance.

Thanks for the reply. That did the trick.
Message Edited by ObiJuan on 05-29-20070:56 PM

Similar Messages

  • I'm no longer able to select the file size when emailing a photo. How can I solve this? iPhone 4S with iOS 7.1.1

    I'm no longer able to select the file size when emailing a photo. How can I solve this? iPhone 4S with iOS 7.1.1. Thanks a lot.

    Yeah - I tried that, several times; each time I get "iTunes is restoring the software on this iPhone" and after about 30 minutes the screen on the phone lights up again with the same screen I had before.  After that ... nothing.

  • Help!  I recently upgraded to OS 10.9.4 from 10.6.8, and now when I want to send an email to a group in my contacts I am no longer able to select the group as a whole.  I have to select each address individually.  This can't be right.

    Help!  I recently upgraded to OS 10.9.4 from 10.6.8, and now when I want to send an email to a group in my contacts I am no longer able to select the group as a whole.  I have to select each address individually.  This can't be right.  With 10.6.8 I used to be able to double click on the name of the group and they would all be selected.  I've also noticed that my address book is now called "contacts."  Thanks in advance for your help.

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
         computer and after the chime press and hold down the OPTION key until the boot manager
         screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
         Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).

  • After installing PSE 10 on OS X Lion, no longer able to select pictures from iPhoto library

    I've downloaded and installed Photoshop Elements 10 on my MacBook Pro, which is running OS X 10.7.4. After installation and importing the photos from iPhoto, I noticed that I am no longer able to select images from my iPhoto library from other applications, such as Facebook, Address Book, etc. (ie; typically in a dialog to select a photo or image, simply browse to iPhoto library to get access to all Events, Albums, Faces, etc.).
    This capability now seems to be broken even if I browse to the iPhoto Library using Finder. Showing Package Contents on the iPhoto Library reveals that all the images are there.
    Any ideas on how to fix this? Drilling into the file structure of the PE Organizer is painful at best.

    You assume too much. I am not mucking around with the iPhoto Library.
    Here is an example of my problem:
    Open Address Book
    Select a Contact
    Click Edit
    Double Click the Photo icon
    A dialog appears for me to "Choose" a photo
    Click Choose...
    Another dialog appears for me to browse to the photo that I would like to attach to that conract
    I select my username under "Favorites", then expand the "Pictures" folder
    When I click on iPhoto Library, I am no longer able to expand it and presented with the photos, events, faces, albums within it, but only get an icon for the iPhoto Library instead.
    This is part of the way a Mac works, and is now broken. It exhibits this in Address Book and any other program, and it was working fine until I installed PSE 10.

  • No longer able to select customized color theme for a collection page?

    Previously I have been able to select a custom colour theme for my collections in Public Site Manager by clicking on Collections > Configure Selected Collection > Theme
    The ‘theme’ tab is no longer showing – see screenshot –
    Does this mean we can longer apply a custom theme (custom colours etc.) to our collection pages?
    It seems we can still create themes (see screenshot below) but we’re no longer able to apply them to collection pages. Is anyone else seeing this?

    What I don't understand is - if Apple have got rid of themes on collection pages - then I would expect a generic theme to be applied retrospectively to all existing collection pages. What I see however is my custom theme on all my existing pages i.e. no change - but when I create a new collection obviously I now don't have the option to apply the custom theme - so I get a generic white on dark grey theme on new collection pages. In summay my existing pages have my custom theme applied and a few new pages have the generic theme and there's way for me to make them all look consistent.

  • No longer able to select a Printer in Print Dialog Box - Windows 7 with CS

    SInce installing Windows 7 I can no longer select a printer in the Page Setup Dialog Box. Instead it always defaults to the default printer. Is there a fix for this?

    You assume too much. I am not mucking around with the iPhoto Library.
    Here is an example of my problem:
    Open Address Book
    Select a Contact
    Click Edit
    Double Click the Photo icon
    A dialog appears for me to "Choose" a photo
    Click Choose...
    Another dialog appears for me to browse to the photo that I would like to attach to that conract
    I select my username under "Favorites", then expand the "Pictures" folder
    When I click on iPhoto Library, I am no longer able to expand it and presented with the photos, events, faces, albums within it, but only get an icon for the iPhoto Library instead.
    This is part of the way a Mac works, and is now broken. It exhibits this in Address Book and any other program, and it was working fine until I installed PSE 10.

  • Not able to select speaker setup in creative audio cons

    Hi, I'm using Creative X-FI Music. Due to a recent re-installation to Vista, after re-installation of drivers and software (with updates from creative support website), I'm still not able to select the speaker setup directly from the audio console. This has prevent me from calibrating my 5. speaker setu
    ps.
    Please help? Thanks....

    what's your os? if you have xp, you should try sp2...that fixed the problems i was having with my card when i upgraded...try telling windows to go to 5. sound through the sound devices in control panel and then go back to surrmixer and see if that works...

  • Regarding wireless mouse:  no longer able to select text or messages and drag it

    Wireless mouse:  Once text or messages is selected, it won't allow me to drag it any other place.  Can't drag anything on desktop????????

    Thanks for the reply. That did the trick.
    Message Edited by ObiJuan on 05-29-20070:56 PM

  • In  iPhoto you r able to pick the type of paper, i.e. glossy, semi glossy, etc. I do not find where u can do so in Apeture..when I go file and select print, there r no instructions like in iPhote.

    In iPhoto you r able to select paper type for phots, i.e. glossy , semi glossy, etc. how do u do this in apeture?

    When you print in Aperture, you first specify the layout of your print in Aperture's "Print" panel, then press "Print". This will open the system print dialogue, and here you can specify the device specific print settings. If you set the pop-up menu to "Print Settings", you will be able to specify the Media Type, if your printer supports different media types.
    Regards
    Léonie

  • HT4550 Lately I find that there is a change in my Safari program.  I am no longer able to minimize Safari, instead I only have the choice of quitting the program.  What do I need to do to bring back the minimize feature?

    Lately I find that there is a change in my Safari program.  I am no longer able to select "minimize" when I want to save the present page for a later time.  Instead, I can only quit the program to get out of it.  Please tell me what I need to do to get the minimize feature back.  Thank you.

    Hi...
    "minimize" when I want to save the present page for a later time
    Minimize reduces the size of the window. It doesn't save the page.
    Click the Reading List icon just to the left of the Bookmarks icon left side of the Safari toolbar then drag the url from the Safari Address Bar to the Reading List.
    You can access saved pages from there.
    edited by:  cs

  • Previously i was able to select tools in the bridge and then select image processor to make jpegs from my tiffs, the image processor tab is no longer on the tools drop down menu

    previously while in bridge, i was able to select tools in the drop down menu and then select image processor to get to the page where i can make tiffs and jpegs. That option is no longer available in the drop down tool selection. How do I make jpegs from my tiffs now in the bridge.
    thanks
    [Moved from the general Cloud forum to the specific Program forum... Mod]

    In current Firefox releases the search bar on the about:home page and the about:newtab page have an autocomplete=off attribute that prevents Firefox from saving form data and now show search suggestions just like you get on the regular Google search page.

  • In mountain lion calendar, the alerts on give you a "close" or "snooze" options.  What happen to being able to select how long you wanted to snooze your alert?

    n mountain lion calendar, the alerts on give you a "close" or "snooze" options.  What happen to being able to select how long you wanted to snooze your alert?

    SnoozeMaster is now avaiable from the Mac App Store, for MacOS X 10.8 and up.
    https://itunes.apple.com/us/app/snoozemaster/id614955483?mt=12
    It addresses this exact issue. You'll be able to configure different pre-set snooze times, enter custom snooze times when an alarm triggers, etc. It's what snoozing should've been from the get go.
    More information:
    http://on-core.com/snoozemaster/

  • No longer able to open Illustrator files when in Review mode in Bridge.

    No longer able to open Illustrator files when in Review mode in Bridge.
    This used to work in CS5.
    Control click the focused image (at front). Near the bottom of the contextual menu select 'Open' and nothing happens.
    Anyone else having this problem?
    Note: Files can be opened from the regular grid mode in the Content Panel.
    Preference File Type Association is correct ai=Illustrator CS6

    Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened. The Ask toolbar can be installed as part of Foxit.
    There are a couple of places to check for the Ask toolbar:
    * Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
    * Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

  • After loading Lion 10.7 I'm no longer able to use Quicken 07. Any work around?

    After loading Lion 10.7 to my Desk Top, I'm no longer able to use my Quicken 07. Is there a work around? All my financial records are in Quicken 07 or do I need to remove Lion 10.7 from my computer

    Quicken is a PPC application. They will not work in Lion because Lion no longer supports Rosetta emulation.
    1. You can downgrade to Snow Leopard.
    2. You can switch to Quicken Essentials.
    3. You can purchase a different application that provides similar services for you. Examples are MoneyDance or MYOB.
    Downgrade Lion to Snow Leopard
    1.  Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Quit DU and return to the installer. Install Snow Leopard.
    This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard. I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.

  • Upgraded to Mountain Lion and CS3, I am no longer able to access the correct dialog box for fine printing with Epson Stylus Photo 1400.

    I have recently upgraded my Mac OS to Mountain Lion, and am using Photoshop CS3 together with Lightroom 5. To my absolute horror, in either Adobe program I am no longer able to access the dialog box which allows me to choose paper type, size, and print quality when attempting to print on my Epson Stylus Photo 1400. An excruciating hour on the phone with largely unintelligible folks at Epson seemed to prove the problem lies with Adobe instead of Epson. I'd greatly appreciate whatever advice might be forthcoming from the Community.

    Well, this seemed to work.. can't believe it! After a year of messing with this!
    from Stevejones5
    "I found a way around this problem. GO to HD/Library/Printers/Epson/InkjetPrinter/ICCProfiles and you will find a file labeled Pro38.profiles. This is a package file. Control click on it and reveal contents. Then you can copy all the profiles and paste them into your Colorsync folder either in the HD/Library folder or your own Home folder/Library. Then the profiles will show up in Photoshop and Lightroom."
    Key, is to Control click on the printer to "Open contents". Then open Resource folder. Copy everything in it and then paste it into the "Colorsync" folder in your Library.  (Remember, to get to Library you have to hold the command key down for it to appear in "Go" Menu for Finder.
    Then I reinstalled printer driver from Apple, then rebooted computer, then plugged in printer. And VOILA-- I can now select Epson Premium Photo Paper Luster!

Maybe you are looking for

  • External monitor with imac not working

    Hello.I have problem with external monitor connected to my imac 27 via mini display port to vga connector. It was working perfectly but around month ago it suddenly stopped. It looks like my monitor doesn`t get any signal from imac, at least that`s w

  • Processing Leavers for Employee expenses and blocking their vendor records

    Help please: Is there a set way of stopping Employee expense records in FI when an employee leaves, and putting a payment block on his/her vendor record? There is no employee status, therefore can the end dates be updated? If so, will this automatica

  • In app store on the iphone 4 featured app has no back button.

    I tried restarting the app store... Rebooting the phone and also did a restore and switching from updates back to featured. the app store still stays at the featured app area where it shows the app linkedin.. I can not see the new apps. please help!

  • Behaviour of default value of METHOD_OPT

    Hello, I was trying to test the impact of extended statistics feature of 11g when I was puzzled by another observation. I created a table (from ALL_OBJECTS view). The data in this table was such that it had lots of rows where OWNER = 'PUBLIC' and lot

  • Menu background lose color when import to dvd sp

    i create psd then flat it and save as tif and jpeg and even psd files. Both look good but when import to DVDSP, the color lose. Any suggestions? save png file?