No longer able to tab to all items in event Info dialog

When creating a new event, I used to hit Command-I to bring up the event info dialog. Then I would tab to each item to change it. This would include the "all-day" checkbox and the "calendar" popup. I would then use the space bar to check/uncheck the all-day checkbox and to pop open the calendar popup and use the arrow keys to scroll up/down the list of calendars. I can no longer do this in the Leopard version of iCal (3.0)! Tabbing skips the above-mentioned items. Please bring this functionality back!

Not sure what to say...i just did it again on machines with Tiger and another one with Leopard. Both work quite similarly with one small exception- the drawer is replaced by the popup.
This is what I did on Tiger
-double clicked an open time slot to create a new event
-In Tiger if the drawer was closed, then I had to open it so that I could tab
-If the drawer was open when creating the event, then I could just start tabbing
-Space bar toggles values of each check box or opens up the list box at which point I can use arrows
and Leopard:
-Double click an open time slot and an event appears
-Double click it again and the pop-up window appears
-then started tabbing through each item in the drawer(including the All-day and calendar items)
-Space bar toggles values of each check box or opens up the list box at which point I can use arrows
How did you install Leopard? Upgrade? Archive and Install? or Erase and Install?

Similar Messages

ITunes shows iPhone as device but Summary Tab is all blank with no info

Hey,
When I connect my iPhone to iTunes it shows connected and goes thru the sync and backup process but when you click on the summary tab it should show me the phone number and serial number and what not... But its blank you can see the boxes as where a button would be but dosent say what it is... Is there a way to fix this?
Thanks,
Cole

Whew.... got it to work after days of trying to figure.
Got answer here: http://forums.macrumors.com/showthread.php?t=1450821 from zblaze.
Wiped phone completely, restored as NEW iphone through itunes. Checked 'Sync all Music'.
After that happens you can restore from backup.

All items are not visible even with no filter

I have a custom list and am not able to run a search the list, through the "all items" view, even with no filter set. The list is also set to only view 50 items at a time, but I am not able to view the next batch of items. The search
will give no results even when the list contains the item with that specific information.

Hi,
1) I understand you are not able to view the 'All Items' in the list.
Can you check the total number of items that list contains.
Go to Site Actions-->View All site content see the number of items beside the list name( right side)
I suspect the list might be reached the threshold value.
2) If the number of Items are less than the threshold value then I would suggest you do a test by creating another view by providing only the view name (Don't use any sort, Filter, Groupby ...etc) and just keep the default settings and let me
know if you are able to see the items using the newly created view.
****************************************************************************************** Please remember to mark your question as answered &Vote helpful, if this solves/helps your problem.
s p kumar

Safari Error:cannot connect to server.Was able to click on all tabs within website many times,no issues.Now can't access the"shop" tab within website-What do I do Now?

Safari and/or internet question:
I have MacDeskTop W/Intel/OS X Lion 10.8.2   and Safari:Ver6.0.2(8536.26.17)
Currently I am having a big issue to access within this website's the "SHOP section(tab)" I ca click on the tabs and read the info in each section, except for the "Shop" Tab.
While in the process of paying for my items in my cart, I received a website message saying something
To the affect that this website is being updated. Your items in your cart will be in your cart.
Then the website's screen kicked me out the door.
A few days later I accessed the main page of this website with no problem.
I can read the information on the main web page pertaining to items I need to purchase, etc., with no problems.
I click and maneuver from on one tab to another from the main page within this website with no issues.
When I click on the "SHOP section(tab)" within this website to complete my purchase.
Part of this website an error occurs on this "SHOP tab".
"Safari can't connect to the server".
Safari can't open the page "https://and the name of this website" because Safari can't connect to the server "www.the name of this website".
I click on the reload from the view of the toolbar and I can't access this website's"Shop section(tab) at all.
I e-mailed the webmaster of this website a few times, but no response.
In the past I was able to access the "Shop section(tab") within this website many times to purchase items with no issues.
Now I am at my wits end as I really need to complete my purchase from this website.
I cannot purchase these items from other websites. Only this website.
So, I really need anyone's tech expertise to help me access the "SHOP" tab within this website.
I also have another website that i have visited numerous times within the last 6 months with no issues.
Now I can't access this website at all.
Safari error: "Safari can't connect to the server".
I can't figure this out
No issues with:
* Comcast tech says that My modem, Wi-Fi connections are fine.
* Cables and wires and Power strip unit to protect my electronics are fine
* Utility bill is up to date.
I have a Mac Desktop 23 inch screen (Purchased 01-01-2013)
                                                  Lion: OS X
                                                  Version 10.8.2
                                                  Processor: 2.7 GHz Intel Core i5
                                                  Memory: 8 GB 1600 MHz DDR3
I use Safari: Version 6.0.2 (8536.26.17)
I use the Mail app that shows a postage stamp with the picture of an eagle
                                                  It is the Version 6.2 (1499)
I really need help access the "Shop section(tab)" of the website to complete my purchase.
What is the next step to fix my dilemma?
Thank-you all in advance with your expertise, and patience.
Very Much Appreciated.
With Kindest Regards
Mac Desktop, OS X Mountain Lion (10.8), Safari: Version 6.0.2 (8536.26.17)

Hi There Linc Davis,
Wow, you are the best.
Yip this is what the website looks like. Great job Linc Davis.
Not surprised that the "Shop" tab is missing. Darn.
Well can you try to access it's "sister" website: astralmusic.com and astralmusicshop.com?
Since you are awesome with the "Flash" can you investigate if this website has a issue withis this "Flash" too?
Please Linc Davis

Hi Thanks for 4.0. It runs much faster on my Mac, however, it no longer works to zoom in all of my web pages. I use to be able to use my finger pad to increase the size of all of all pages. Thanks again.

Hi Thanks for 4.0. It runs much faster on my Mac, however, it no longer works to zoom in all of my web pages. I use to be able to use my finger pad to increase the size of all of all pages.
Thanks again.
PS Are you working on a version for the iPad and iPhone with Add Blocker? That would be great!

Here are some zoom add-ons which might provide a workaround:
[https://addons.mozilla.org/en-US/firefox/search/?q=image+zoom&cat=all&x=0&y=0 Image Zoom]
As regards your question about iPad and iPhone, you'd be better off posting that question here: [https://forums.mozilla.org/addons/ Mozilla Add-ons Forum]
P.S. ''Apologies for not responding earlier''.

My old email address was hacked and I am no longer able to access it. How can i reset my icloud ID without losing all of my pictures and more inportantly contacts? I have created a new ID but i cannot seem to use it until I delete the old account

my old email address was hacked and I am no longer able to access it. How can i reset my icloud ID without losing all of my pictures and more importantly contacts? I have created a new ID but i cannot seem to use it until I delete the old account

You need to use the old ID and password to delete the iCloud account. After you delete the old account, you can sign in with the new ID in iCloud.
Have you seen this.
http://support.apple.com/kb/HT5796
iCloud
iOS 6 and later: Go to Settings > iCloud.
If you signed out before changing your Apple ID, enter your current Apple ID to sign in. The data from your iCloud account will download to your device.
If you're still signed in with your previous Apple ID:
Scroll down and tap Delete Account. Depending on what iCloud options are turned on, you'll be asked to confirm that you want to delete data from your device. To confirm, tap Delete. (If you're using iOS 7 and have Find My iPhone turned on, you'll be asked to enter the password for your previous Apple ID. Enter the password, then tap Turn Off.) The data will be deleted from your device, but not from iCloud.
Enter your current Apple ID to sign in. The data from your iCloud account will download again to your device.

Since upgrading to 7.0.3 (iPhone 5 64gb, with iTunes Match enabled) all of my music wiped off my phone. Downloading it again, most of the artwork has been mixed up with other artists, and I'm no longer able to stream or download over 3G? Any ideas?

Since upgrading to 7.0.3 (iPhone 5, 64gb, with iTunes Match enabled) almost all of my music has vanished from my phone (weirdly some hasn't).
Downloading it again, most of the artwork has been mixed up with other artists, and I'm no longer able to stream or download over 3G (all tracks greyed out), though my network settings etc are all set correctly.
Lastly since upgrading to iOS 7.0.1 (and beyond) Genuis has become effectively useless: it continually asks me to connect to wi-fi, and if I do it creates playlists mostly composed of tracks by the same artists or those very obviously linked to them- previously it created brilliant, nuanced playlists.
Are these things connected, and how do I fix them?

I have done this on numerous occasions but I think that my Iphone has a defect. After many tries, reinstalls, deletion of content, changing content to be stored on external hard drive, deleting itunes and cleaning computer I managed to get all of the songs on and things seemed okay for a while.
The problem returned about a week ago after downloading a new album from Itunes. I now have 12.5k of songs leaving 10gb spare on Iphone which should be more than enough room to operate properly. Last night it seemed to be dowloading ok (after doing all of the above again for the umpteenth time) this morning it revealed that it had just synched 2.5k of songs and 18gb of "other" on the contents bar. it wont synch now as it says its over capacity. So the 18gb of "other" would probably be corrupted data that means it must corrupt each song as it tries to synch it.
The 2.5k of songs it did synch are working on the Iphone as is every song in the library on Itunes. I did completely delete the new album I bought and redownloaded it from the store then tried to synch just that album and it worked fine.
Just about time to dump apple I think!

LightScribe SuperMulti DVD±R/RW with Double Layer Support is no longer able to read all lightscribe discs(Blank or Containing Data)

Hi,
The product Name of my computer is: HP Pavilion dv6-6093ex Entertainment
Notebook PC support
The number of my computer is : LM610EA#A2N.
Could anyone please at this splendid forum take some of their precious time
out to really reply my questions and solve my problems?
FIRST OF ALL:
My HP Pavilion Laptop is about 3 years old.
My
sister's Dell Inspiron laptop is 3 years old.
My HP laptop is well-cared, as opposed to my sister's Inspiron Dell laptop, which is always thrown in dust without caring at all. Also, its battery is always inserted even when it is fully charged while the laptop is plugged in to the main power supply.
However, my laptop is either used on only battery, or on plugin. Also, it is kept from the dust. But, I really found that the battery of the Dell laptop still lasts about three and half hours, and there is no problem cooling fan is not properly properly.
I only remember one thing differently done on my laptop battery which is I charged it fully, then I stored it without using it for about four months, then when I reused it, I found it got worse over time. I.e. first time of using it after storing,I found
it empty, then I charged it again fully, however, then it lasted about 2 hours, then 1 and half hours, next an hour, now it is only lasting about 20 minutes without performance. If there is high performance, then
the computer shuts down suddenly.
My problem is follows:::
First: Whenever I inserted any Containing Data OR Data CD/DVD-RLightScribe discs, I found that HP optical driver was
unable to read them. When clicking on the optical disc drive 'double-click' while disc was inserted, then I found that disc opened as this way(NOTE: With a CD/DVD player is grayed out)
I was told 'I suspect the culprit might be hardware and lightscribe dive might be
corrupt. Please sent it to service center to check. In addition, this thread could be as a reference:
http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/media-in-cddvd-drive-is-not-readable/794fe26a-7e47-45c4-a50b-0af2ed53f75b'
Since no one replied to me at HP forums, although my HP laptop is one of their products, I had to post my problem here to know if my driver is corrupted and needs to be replaced or not.
Blank Or Used(containg data) CD/ DVD ±R/RW lightscirbe is unable to be read by optical drive
When clicking on drive 'duble-click', I found it opens like a USB FlashDrive or With a CD,DVD player, however,
: Bare in mind that 'with CD/DVD Player'
is grayed out)
Not Blank(containing data) CD/ DVD ±R/RW NON -Lightscirbe disc opens normal:
Blank CD/ DVD ±R/RW NON-lightscirbe opens normal(Opens like
a USB FlashDrive or With a CD,DVD)::
My LightScribe System Software version is:
I've tried installed the latest version of lightscribe software, then I run
the diagnostic utility, however, the problem still persists.
My HP CD/DVD DVDآ±R/RW specs are::
Optical Drives
hp CDDVDW TS-L633R
Media Type DVD Writer
Name hp
CDDVDW TS-L633R
Availability Running/Full Power
Capabilities Random
Access, Supports Writing, Supports Removable Media
Read capabilities CD-R,
CD-RW, CD-ROM, DVD-RAM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL, DVD-RW
DL, DVD+R DL
Write capabilities CD-R, CD-RW, DVD-RAM, DVD-R, DVD-RW, DVD+R,
DVD+RW, DVD-R DL, DVD+R DL
Config Manager Error Code Device is working
properly
Config Manager User Config FALSE
Drive E:
Media Loaded
FALSE
SCSI Bus 0
SCSI Logical Unit 0
SCSI Port 0
SCSI Target Id
1
Status OK
Trying to solve the problem,
I have done these steps in order::
I tried checking with dignostic ulitiy:
I have tried Advanced View , this is the file of output data ofdignostic utlity
LightScribe System Software Settings:
SOFTWARE\LightScribe\MessageDir C:\Program Files (x86)\Common Files\LightScribe\
SOFTWARE\LightScribe\LSPrintDialog C:\Program Files (x86)\Common Files\LightScribe\LSPrintDialog.exe
SOFTWARE\LightScribe\LSPrintingDialog C:\Program Files (x86)\Common Files\LightScribe\LSPrintingDialog.exe
SOFTWARE\LightScribe\LsPrintLauncher C:\Program Files (x86)\Common Files\LightScribe\LSPrintLauncher.dll
SOFTWARE\LightScribe\ResourceDir C:\Program Files (x86)\Common Files\LightScribe\res
SOFTWARE\LightScribe\LSPrintAPI C:\Program Files (x86)\Common Files\LightScribe\LSPrintAPI.dll
SOFTWARE\LightScribe\Update\UpdateShellCommand http://www.lightscribe.com/go/downloads/windows
SOFTWARE\LightScribe\Update\PreviousVersion 1.18.20.1
SOFTWARE\LightScribe\Update\CurrentVersion 1.18.27.10
SOFTWARE\LightScribe\Update\TrailingVersion
SYSTEM\CurrentControlSet\Services\LightScribeService\Type 16
SYSTEM\CurrentControlSet\Services\LightScribeService\Start 2
SYSTEM\CurrentControlSet\Services\LightScribeService\ErrorControl 0
SYSTEM\CurrentControlSet\Services\LightScribeService\
SYSTEM\CurrentControlSet\Services\LightScribeService\DisplayName LightScribeService Direct Disc Labeling Service
SYSTEM\CurrentControlSet\Services\LightScribeService\ObjectName LocalSystem
SYSTEM\CurrentControlSet\Services\LightScribeService\Description Used by the LightScribe software components to support 3rd party disc labeling applications using the LightScribe COM Application Programming Interface (LSCAPI). This service needs to run for LightScribe direct disc labeling to work.
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\TypesSupported 7
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\0 IDE\CdRomhp_CDDVDW_TS-L633R______________________0300____\4&334f7860&0&0.1.0
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\Count 2
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\NextInstance 2
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\1 SCSI\CdRom&Ven_ELBY&Prod_CLONEDRIVE&Rev_1.4\1&2afd7d61&0&000000
SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\allocatecdroms 0
SYSTEM\CurrentControlSet\Services\CDRom\autorun 1
SOFTWARE\INTEL\Intel Application Accelerator Not detected
Drives and Media:
Drive 0 : hp CDDVDW TS-L633R 0300 219 (E:), Media Imaging Parameter : 114
I tried running the below command line to fix potential disk issue 'Chkdsk/r /f'
I cleaned the drive, discs, and so on.
I have uninstalled the all third-party data recording software.
I have uninstalled the Cyber DVD suite, lightscribe system software
which came pre-installed with my HP pavilion Notebook.
I have recovered my system from the HP Factory Recovery discs.
I have tried opening all those LightScibe discs not opening on my HP optical drive, on a Dell optical drive, and all of them were opened well, although Dell optical drive did not have a lightscribe feature at all., nor third party disc recording software.
However, the problem is still with opening the discs LIGHT-SCRIBE.
Thus, my questions are:
How to determine if the drive is corrupted and needs to be replaced with another one.
I think there something needed to be done on the BIOS Of my HP laptop[[[A similar problems happened on my Desktop computer's optical drive which is as follows (ALL discs are opened as empty by Optical Drive of My Desktop Computer) ---while
my optical drive of my desktop was connected to the
primary slave IDE, and the HDD was connected to the primary master IDE, the optical drive and hard disk are functioning well. However, I remember that while burning an image with Nero essential V: 5, something went wrong, and
then the Optical Drive of My Desktop Computer (HL-DT-ST DVD-RAM GH22NP20) became NOTrecognised/Installed on
BIOS, although it was still shown on the device manager as a recognised device. Also, it was listed on my computer, however, when entering a disc(blank or with data) into the drive, I found it was not recognised, and it opened empty(no files
at it), although it contains data. Thus, I decided to boot to BIOS, and clicked on 'Autodetection for IDE', then I found that only HDD was still shown as installed on BIOS. However, the optical drive was not. Th I tried clicking on it on BIOS and then
clicking on 'enter' to try to let the device be re-recognized. However, that
made no difference. I had to take part my computer ,and then reconnected the optical drive onto thesecondary slave IDE , and let HDD connected to the same
primary master IDE. Then, I found that the problem solved and all discs were read normally. Aslo, optical drive became installed on BIOS.
What is meant with with double Layer Support.
How much does it cost?
A man should convert his anger and sadness into strength to continue living in this life.

Did you try unsinatalling LightScribe application then checking the status ?
This is probably related to the faulty hardware or the application ( LightScribe
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.
Could you please really concentrate with me, and really reply to me to finish this problem pending.
If you had had a look again at my first post, you would have seen that I said that I have done some things, among of which is: I have uninstalled the Cyber DVD suite, lightscribe system software
which came pre-installed with my HP pavilion Notebook.
Yes, you're right the two threads below are concerned about one issue.
https://social.technet.microsoft.com/Forums/en-US/w7itpromedia/thread/5c1aa5e8-9728-492b-a5c3-387f29ee4b6e/#d6f63628-29a3-4adf-b33f-03b33c138910
https://social.technet.microsoft.com/Forums/windows/en-US/683997ff-1004-4579-b69d-5e982746c917/lightscribe-supermulti-dvdrrw-with-double-layer-support-is-no-longer-able-to-read-all-lightscribe?forum=w7itpromedia
However, this thread contains more precise details and screen shots about the problem. I was not able to understand whether all lightscribs were not unable to be read or not. However, I now recognized that, and I recognized that only all LightScribe(empty
or used) discs are unable to be read. furthermore, that other thread got far too longer to be followed.
Moreover, I would like you to take some time out to answer my problem about Lighstscribe discs since I am going to purchase 'A battery, Cooling Fan' From the HP agent in Yemen, which is far away from me about 1000 Km. Thus, If my optical disc drive was corrupted
as well, then I would be requesting the 'optical disc drive' as well from the HP along with 'Battery, Cooling Fan' .
A man should convert his anger and sadness into strength to continue living in this life.

How would I be able to pull up all of the text messages tat were in my phone over the course of 2 years and back them up to my computer since my phone has a broken screen and can no longer read the mesages.

How would I be able to pull up all of the text messages tat were in my phone over the course of 2 years and back them up to my computer since my phone has a broken screen and can no longer read the mesages.

If the messages are stored on the device and you can power the device up you can use the application posted at https://community.verizonwireless.com/thread/770529 , the application has a screen capture option and you can use the screen as a guide to install MyBackup from Market or a number of backup apps from Market and then you can run the applications and backup data to your SD Card to restore to the replacement device.

I just updated my OS to Lion, I am no longer able to open all my "Word" documents, is there a way I can do this or change them all to Pages?

I just updated my OS to Lion, I am no longer able to open all my "Word" documents, as the new system does not support this, can I get around this somehow?, or some way to change the documents all to "Pages"? Or, should I reinstall the Leopard OS, change all the word documents to Pages and then reinstall Lion?
Thanks

You can open Word files in Pages by default without any problem. Select one of the Word files by clicking once on it in Finder. Press cmd-i to Get Info on the file. In the bottom half of the window that opens, is Open with:. Below that click on the drop down box and select Pages.app. Then click on Change All... and confirm the "Are you sure... " warning. Now, all Word files will open in Pages.
HTH

Is my iMac now useless as i have installed lion and i am no longer able to run cs2 photoshop and illustrator as this is all i use my mac for they should make this clear before buying it i can't afford the latest version of cs2

is my iMac now useless as i have installed lion and i am no longer able to run cs2 photoshop and illustrator as this is all i use my mac for they should make this clear before buying it i can't afford the latest version of cs2 and cant believe what a waste of money it is.

The newest version of CS2 is CS5. And it was made very clear that these applications would not run in Lion. Not only by Apple, but on all sorts of communities and websites. It has been a long time coming - PowerPC apps were outdated six years ago. Lion does not support Rosetta, and therefore not PPC apps.
you have to options. Go back to Snow Leopard or upgrade your software. (MS Office 2004 and older will not run either).
Cheers

My apple tv, all of a sudden, is no longer able to connect to my computer. I have restarted EVERYTHING, multiple times, still not working.

My apple tv, all of a sudden, is no longer able to connect to my computer. I have restarted EVERYTHING, multiple times, still not working.

Welcome to the Apple Community.
Check your store location is set correctly, if this doesn't help, try restarting the Apple TV by removing ALL the cables for a 30 seconds.

All of a sudden, I am no longer able to send e-mails (tho I still receive them). the error message says "outgoing server failed" Any ideas?

All of a sudden, I am no longer able to send e-mails (tho I still receive them). the error message says "outgoing server failed" Any ideas?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Can you send email from that account on another device?
- You can try deleing the account from the iPod and reentering the settings.

All of a sudden I can no longer open new tabs.

I have been using Firefox for a long time with no problems. Today for the first time I can no longer open new tabs. I reloaded the program with the same results.

Disable or un-install the Ask Toolbar. There is a compatibility issue with the Ask Toolbar in Firefox 3.6.13 that Ask needs to fix:
*http://support.mozilla.com/en-US/kb/Uninstalling%20add-ons#w_how-to-disable-extensions-and-plugins
*http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
 
'''Other issues that need your attention'''
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post. You can also see your plugins from the Firefox menu, Tools > Add-ons > Plugins.
*Adobe PDF Plug-In For Firefox and Netscape "9.4.2"
**There is a new version of Adobe Reader available (version 10 or Reader X) that you may want to look into
**Your current version 9.4.2 is the most recent for Adobe Reader 9
**About Adobe Reader X (version 10)
***New Adobe Reader X (version 10) with Protected Mode was released 2010-11-19
***See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
***If you want to update to Reader X, follow the instructions below
*Shockwave Flash 10.1 r102
**'''''Security update released 2011-02-08'''''
*Next Generation Java Plug-in 1.6.0_22 for Mozilla browsers
**1 update behind; version 1.6.0_23 is a stability update according to Sun/Java
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
#**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''Download link''': ftp://ftp.adobe.com/pub/adobe/reader/
#***Choose your OS
#***Choose the latest #.x version (example 9.x, for version 9)
#***Choose the highest number version listed
#****NOTE: 10.x is the new Adobe Reader X (Windows and Mac only as of this posting)
#***Choose your language
#***Download the file, SAVE it to your hard drive, when complete, close Firefox, click on the installer you just downloaded and let it install.
#***Windows: choose the .exe file; Mac: choose the .dmg file
#*Using either of the links below will force you to install the "getPlus" Adobe Download Manager. Also be sure to uncheck the McAfee Scanner if you do not want the link forcibly installed on your desktop
#**''Also see Download link''': http://get.adobe.com/reader/otherversions/
#**Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org
#*Java Test: http://www.java.com/en/download/help/testvm.xml

HT4628 I am no longer able to iTunes wi-fi sync since I upgraded to the iPhone 5. Can anyone help me with this issue? Your help would be greatly appreciated.

I am no longer able to iTunes wi-fi sync since I upgraded to the iPhone 5. When trying to connect, it stays in the discovery mode and never connects.I have to try and pair them all over again. Then I get a message saying that my Mac Book Pro is not supported. Can anyone assist me in resolving this issue. It is an early Mac Book Pro 10 I believe. I purchased it in February of 2010.

I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

No longer able to tab to all items in event Info dialog

Similar Messages

Maybe you are looking for