No longer able to use + and - keys to change dates or time?

I recently upgraded from an igloo iMac running OS 10.3.9 to a new Mac mini with 10.5.8 (awaiting upgrade to Snow Leopard).
I used to use the + and - keys all the time to change dates and time in iCal, but have been unable to since my upgrade. Has that functionality been deleted, or is there a way to do it that I have just not discovered yet?
Thanks.

Forgotten Passcode or device disabled after entering wrong passcode
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

Similar Messages

Using + and - keys to change dates and times; Find and Replace event

Hi all, \
I have two iCal related questions. One has been bugging me since the Snow Leopard upgrade and the other I'm just wondering about.
1. Is it just me or is it no longer possible to use the + and - keys to increment dates and times when editing an event? It seems that now I have to actually type in the numerals instead. Is there something in the preferences I'm missing or is that just the way it is now? Seems like a step backward, if so.
2. Is there a way to do a "find and replace" for an event that occurs sporadically throughout the year, but isn't a repeating event per se? I just want to rename the event itself.

Don,
...is it no longer possible to use the + and - keys to increment dates and times when editing an event?
I did not know that was possible. Try using the ↑/↓ arrow keys to increment numbers, and →/← arrow keys to change fields.
Is there a way to do a "find and replace" for an event that occurs sporadically throughout the year, but isn't a repeating event per se?
AFAIK, you have to use the search field to find the individual events, and change them when you click on the events in the search results field.
;~)

I am trying to restore my iPhone 5 and my screen is no longer able to use and there is a lock code on the phone, how do i restore the phone without having to use the phonne?

how do i restore my iPhone with a lock code on the phone and the screen is completely unable to use?

Forgotten Passcode or device disabled after entering wrong passcode
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

I am no longer able to use the volume control buttons ( /-/or mute) on my key board in Windows 7

1. HP Pavilion dm4 XO132AV
2. Windows 7 64-bit
3. No error message
4. No changes were made prior to when the issue occured
5. Question: I am no longer able to use the volume control buttons ( /-/or mute) on my key board in Windows 7

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp50501-51000/sp50856.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, restart the notebook and let Windows fully load. Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I;m no longer able to use the Penn State ANGEL system (I teach on line) for my email and intead get messages about "script" problems.

Question
I'm no longer able to use the Penn State ANGEL system (I teach on line) for my email and instead get messages about "script" problems

I have asked a moderator to provide assistance, they will post an invite on this thread.
They are the only BT employees on this forum, and are a UK based team of people, who take personal ownership of your problem.
Once you get a reply, make sure that you are logged into the forum, then click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
They will respond either by phone or e-mail within 5-6 working days.
Please use the tracked e-mail, to reply, not via the forum. Thanks
This is the form you should see when you click on the link. If you do not see this form, then you have selected the wrong link.
When you submit the form, you will receive an enquiry number, so please keep a note of it
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

No matter where I go, as soon as I turn on the Internet on my new Mac Book Pro, everyone else is no longer able to use the Internet. How can I fix this?

No matter where I go, as soon as I turn on the Internet on my new Mac Book Pro, everyone else is no longer able to use the Internet. How can I fix this? I received it as a gift for college, but its hard to do research when everyone constantly yells at me to get off because they can no longer continue what they're doing.
<Edited By Host>

" how can I sync my iphone to my mac book without losing all the music and pictures on it?"
You cannot. Copy everything you want form the old computer to the new one, then sync it.
it basically says you have to erase your iphone to sync to a new itunes!
Correct Iphone will sync, or manually manage, with one and only one computer/library at a time. Syncing, or manually managing, to another will indeed erase the current content.

In camera raw, I am no longer able to use the adjustment brush. This is a recent phenomenon.?

In camera raw, I am no longer able to use the adjustment brush. This is a recent phenomenon.

Well, it worked fine for me as well for the past couple of years. I had not had any problems using it for the past few years. I use a Mac OS X Yosemite. As far as I can tell nothing had changed. I had not added any new updates, and a week ago the adjustment brush in camera raw simply ceased working. Everything else in camera raw works. However, the adjustment brush is a critical tool. I have checked my permissions, and even repaired my permissions with no results. Of course I have also tried several restarts to no avail.

I installed the new version of iTunes today. It's 12.1.1. After completing the installation, including restarting my computer, I was no longer able to use Windows Internet Explorer. Has anybody else experienced this? If so, how did you fix Explorer?

I installed the new version of iTunes today. It's 12.1.1. After completing the installation, including restarting my computer, I was no longer able to use Windows Internet Explorer. Has anybody else experienced this? If so, how did you fix Explorer? I was using Explorer 11 and Windows 7, installed on an HP Pavilion g series

Never heard of that being caused by installing iTunes. Try asking on a Windows forum. This isn't a problem with iTunes or any other Apple product. If you believe it is, uninstall iTunes. If the problem persists, you'll have to seek advice on a Windows forum or contact Microsoft for support.

After loading Lion 10.7 I'm no longer able to use Quicken 07. Any work around?

After loading Lion 10.7 to my Desk Top, I'm no longer able to use my Quicken 07. Is there a work around? All my financial records are in Quicken 07 or do I need to remove Lion 10.7 from my computer

Quicken is a PPC application. They will not work in Lion because Lion no longer supports Rosetta emulation.
1. You can downgrade to Snow Leopard.
2. You can switch to Quicken Essentials.
3. You can purchase a different application that provides similar services for you. Examples are MoneyDance or MYOB.
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard. I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.

After Firefox updated last night, I am no longer able to use it. "Unable to connect" I have added it back through the firewall, nothing works. Help!

Starting last night, after an update, I am no longer able to use Firefox.
"Problem loading page"
"Unable to connect"
Unable to connect"
Firefox can't establish a connection to the server at.....
I have tried various things, even uninstalled and re-installed, took it out of the firewall, and added it back in. But nothing is working.
Please help!
Thank You
Mara

Hello Mara, see if the next is helpful : [https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can Firefox can't load websites but other browsers can]
also, try to boot the computer in [http://windows.microsoft.com/en-hk/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows Safe mode with network support] (press F8 on the boot screen) and check firefox again.
(If works in Windows Safe mode then probably you have problem with other software, like security software or maybe a system driver, that is running on your computer).
thank you

Why am I no longer able to use my Logitech keyboard since the software upgrade y'day?

Why am I no longer able to use my Logitech keyboard since the software update last night?

Hey atinaaw,
I would first suggest uninstalling the software that is already on your computer for the printer. I have included the document 'Uninstalling the Printer Software'. Please choose the option for Windows 8, as it will be the same steps for Windows 8.1.
After the uninstall is completed. Please download and run the Printer Install Wizard. This will make sure that you do get the most current and compatible software for your computer, and printer.
Please let me know if you are able to install, and use your printer successfully, thank you.
I worked on behalf of HP

I'm no longer able to use the projector VPL-ES4 with win7, he accuses error frequency

I'm no longer able to use the projector VPL-ES4 with win7, he accuses error frequency.
Working at a university here in Brazil Unicamp.
Here we have several projectors model VPL-ES4, we were using this projector with win7 however a few days they all stopped to show the image of computers accusing problem in frequency, we made all the alternatives so that One can be reestablished TRANSMISSION signal however all were in vain, reading in many forums found equal to our cases and the solution presented was to use a computer with win98 and it really worked, but with the end of support for this version of the system we are failing to use it, I wonder how we can solve this problem and why even this ocrrendo.
I thank you in advance for help and attention
Rafael Marques

archie0 wrote:
Yes. NVIDIA+CRT+VGA cable = bad EDID.
Here's what you can do. Fully remove the xorg.conf file. Regenerate them using nvidia-xconfig, Open the nvidia's GUI as root and just click "Save configuration", or something among those lines. Google your monitor's manual and find the RIGHT vertical and horizontal sync frequency ranges. After setting them in your xorg.conf log-out and log-in again. Go to the nvidia settings gui, you should be able to use a higher resolution.
I've tried this a few times, but always end up with a "Signal out of range". I think the trick is finding the correct ranges. My monitor is a Soyo Topaz S 24", and I can't find any official manual or specs online. What I have found is this:
http://www.thinkcomputers.org/old/index … ews&id=733
That review indicates:
Frequency: Fh: 30 kHz - 80 kHz; Fv: 50 Hz - 75 Hz
So I set:
HorizSync 30-80
VertRefresh 50-75
Signal out of range, which is annoying because in order to fix it I either have to reboot using a live CD, mount the drive, or ssh into it. Whoever started the trend of disabling ctl alt backspace to kill an xsession is not my friend...
Some other forum posts about this monitor indicate that there may have been two variants, but I can't find a different set of specs.
Last edited by vor_lord (2012-09-25 05:48:24)

Please help...When I use the Iris enhance, i'm no longer able to use the sharpness,saturation,clarity,tone +tint feature. It seems to be fixed.

Never mind,found it! Duh! Lol

When I use the Iris enhance i'm no longer able to use clarity,saturation,tone,tint etc... why?
Why not? The Iris Enhance Preset sets the brush to Exposure +0.35, Clarity +10 and Saturation +40. If you want additional adjustments on the same brush or different values for the three preset parameters, just move the sliders.

Question... When I use the Iris enhance i'm no longer able to use clarity,saturation,tone,tint etc... why?

How do I correct this, or am I due for an upgrade?

When I use the Iris enhance i'm no longer able to use clarity,saturation,tone,tint etc... why?
Why not? The Iris Enhance Preset sets the brush to Exposure +0.35, Clarity +10 and Saturation +40. If you want additional adjustments on the same brush or different values for the three preset parameters, just move the sliders.

HT3669 After applying HT3669, my HP LaserJet Professional P1100+ no longer able to use manual duplex.

After applying HT3669, my HP LaserJet Professional P1100+ no longer able to use manual duplex.
iMac C2D, Snow Leopard
HP LaserJet Professional P1100+
The alert box is suppressed in the warning printing queue instead of an Alert Box with [OK] to press.

Hi , Thanks for posting in the HP Forums, and welcome. I understand you are having an issue selecting the manual duplex print setting for your HP LaserJet Pro M1217nfw printer on your Mac computer running 10.10. I'd love to help you with this. Firstly, do you have the most recent HP Printer driver update installed? If not you can download it from the App Store here - HP Printer Drivers v3.1 for OS X Then, I'd recommend removing and re-adding your printer, to make sure you are using the correct driver (10.10 will often default to using an AirPrint driver which does not have a manual duplexing option). Click the Apple icon on your menu bar.Select System Preferences, then Printers and Scanners.Select your M1217 and click the (-) button to remove it.Press the (+), and then select Add Printer or Scanner. (NOTE: You don't want to add the printer as a "nearby printer" even if it is listed there)Select your printer from the list of available printers that loads.Make sure under "Use:" that it lists the printer name (not AirPrint), then select Add.Try printing your document(s) again.Please respond to let me know if we've resolved this issue!Good luck.

No longer able to use + and - keys to change dates or time?

Similar Messages

Maybe you are looking for