No longer accepts sim

yesterday, the phone suddenly required me to enter the sim code - the phone wasn't switched off or anything.
When I enter the sim code, the phone thinks about it for a while and then requests the sim code again and again and again...if you enter a wrong sim code it tells you so but if you enter the right code it just doesn't react to it.
I tried the sim in another phone and it works straight away, so it appears to be a phone issue.
I tried everything : hard reset, taking out sim and putting it back in, software reinstall, etc. but nada...
Anyone with similar issues ?
Thx T

OK, the solution seems to be that you take the phone back and ask for new one
Should have one within 48h.

Similar Messages

  • Itunes will no longer accept any of my credit cards.  Says security code doesn't match with any card I use.  I have inputted new card info in the apple store area and it still says the same thing in itunes.  Customer service is no help at all.

    Itunes will no longer accept any of my credit cards.  It says vcode doesn't match when it does.  Customer service is no help.  I have re-inputted the info in the account section of the apple store and in itunes--still says vcode doesn't match.

    Itunes will no longer accept any of my credit cards.  It says vcode doesn't match when it does.  Customer service is no help.  I have re-inputted the info in the account section of the apple store and in itunes--still says vcode doesn't match.

  • My iphone 4s is no longer accepting my wifi!, My iphone 4s is no longer accepting my wifi!

    Someone help!
    My IPhone is no longer accepting any wifi! It's being almost 2 months since that started! I've heard I'm not the only onde with this problem.. Does anyone know how to fix it? Can it be a problem with the software?

    Same thing has happened to me. I have tried every trick that's been posted here. I just ran out of options. Galaxy phone is starting to look better by the minute.

  • My iphone 4 is no longer accepting or sending i messages. How do I fix it? I have already reset phone.

    My Iphone is no longer accepting or sending i messages. I have already rest it. How do I fix it?

    Hey walteka,
    You're on the right track by starting off your troubleshooting with a restart. I found this article that details other troubleshooting steps to try:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    It is very detailed and I would read through it all, but I would concentrate on the "If you still can't send or receive iMessages" section.
    Cheers,
    David

  • AppleTV no longer accepts new 3rd party remote

    I got a new UVerse remote since the old one went belly-up.  I wanted to program the new one with the AppleTV.  The AppleTV would not accept input from the remote.  I messed with all the remote configs, and deleted one that WAS working for my Harmony remote.  It would no longer accept a connection from the Harmony.  I wiped the AppleTV back to factory, and it still tells me it cannot get a signal from either the UVerse remote or the Harmony remote.
    Whenever I try to program, and click on the "Up" button, the light blinks, and the AppleTV beeps.  So, it is clearly getting the signal, even though it says it isn't.
    I feel like I am missing something very simple, or one of the most recent updates broke something.

    I know how you feel. I have (2) apple TVs. I think I upgraded a couple of weeks ago, Ill check my version tonight. But I get loooooooooooooooooooooong pauses when I go to my "artists" section under music. Its like it locks up for a minute or 2. Then finally list all my artist. I have 20,000 tracks, but Im not streaming.
    I agree apple dont release an update unless you know theres its perfectly bug-free version. There just too eager in recieving those movie revenues to care anymore it seems.
    Jonathan

  • Since upgrading Firefox, it no longer accepts URLs in the URL bar - it works if I have a bookmark, a link or from History, but not if I enter or paste a URL.

    Firefox 33.0.2 on Windows 8.1 64 bit. Since upgrading Firefox, it no longer accepts URLs in the URL bar - it works if I have a bookmark, a link or from History, but not if I enter or paste a URL and hit <enter>, in which case nothing happens at all.
    I have found that issue reported for Ubuntu (https://support.mozilla.org/en-US/questions/1011935?esab=a&as=aaq) but not for Windows. The solution there to change the keyboard is not feasible since it's a laptop with a built-in keyboard.
    I did not have this issue with FF 28 (I finally upgraded because I was getting BSODs) and I don't have this issue with any other Browser on same platform.
    Any help appreciated.
    Thanks.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
    * Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • Solaris Management Console no longer accepts logins after running JASS...

    I have an unusual problem... I have a Solaris 10 system (with the 2/16/2005 patches on it. I am able to use the Solaris Management Console (v2.1) with no issues to make my disk storage adjustments, etc etc.
    The problem is when I run JASS with the secure.driver setup. After that, the Management console no longer accepts the root password to authenticate. So, I know that JASS tightened something up, but I can't figure out what it did. Worse, when I undo the JASS run, it doesn't undo whatever it did to the security of the Management Console.
    Any idea where the Solaris Management Console gets it's security information (and configuration) from? And how I can undo whatever JASS did to it?
    Again, I've reinstalled this test box 3 times, and I know it's the JASS step that's locking me out, and not the recommended & security patches.
    Thanks to all!
    -- M

    As a followup - right after posting this message, I opened a support case for this, and the solution is that you need to go into /etc/security/policy.conf and backup JASS's change to the default encryption model.
    Change CRYPT_DEFAULT=1 back to CRYPT_DEFAULT=__unix__
    Then, you have to clear the password using "passwd -d", and then reset it again to what you want. Then, the management console will work.
    I guess the management console is set to always use the __unix__ method, and not look at the policy.conf's setting. So when JASS wanders from the default, it breaks SMC.

  • Adobe Reader 11.0.09 - some certificates no longer accepted for signing PDF forms

    After installation of the patch 11.0.09 of Adobe Reader some certificates are no longer accepted for signing (not enlisted in list of certificates) when clicking the sign fields of PDF forms. The forms were created using LiveCycle Designer.
    Is it by design or is it a bug? If it is by design, what is the change, which caused this behavior? We are facing the problem, when our users are no more able to sign the request forms using their client certificates.
    The example is on the following screenshots.

    Hi Milan,
    Yes, there has been some enhancements in this domain, You may check the release note of 11.0.09::  11.0.09 Planned update, Sept 16, 2014 — Acrobat and Adobe Reader Release Notes
    General information about digital signatures: http://www.adobe.com/devnet-docs/acrobatetk/tools/DigSig/index.html
    Regards,
    Ajlan Huda.

  • IMessage no longer accepts images to be dragged into the message box

    My iMessage iMac app no longer accepts images to be dragged into the message box since upgrading to Mavericks. I used to be able to just drag in .jpg images and they would appear in the text field to be sent to another persons iPhone/iPad/iMac. This no longer happens and just ignores that I have dragged it. Not even a "not accepted" icon appears.
    Is this just me? Or a bug in Mavericks?
    James

    Its working again now after a restart so must be a bug.

  • HT1277 Why is mobile me no longer accepting my password?

    My password still works for other application. However, mobile me no longer accepts it and no, I have not changed it nor mistyped it.

    I'm having this same problem. I can no longer get my email using Mac Mail or Outlook. I can log into the website and get it just fine, so I know my password is working fine.
    I have deleted the account and started over from scratch, but it will not log in.
    I get: Logging in to the MobileMe IMAP server "mail.me.com" failed. Make sure the user name and password you entered are correct then click continue. If the infomration isn't correct, you cannot received messages.
    As I said, everything is correct. I changed the server settings as suggested above, it did not help.
    Nevermind....all of a sudden it's working.

  • My wife's iPad no longer accepts texts/iMessages. Did well for a year, now no go.

    My wife's iPad no longer accepts texts/iMessages. Worked great for over a year, now nada?  Help?

    1. Make sure software is up to date
    2. Make sure Messages is enabled; Settings>Messages
    3. Make sure Date and Time is correctly set; Settings>General>Date and Time>Set Automatically>On
    4. Make sure Push Notification is enabled
    5. Make sure phone number or email address is correct
    6. Hold the Sleep and Home button down (together) until you see the Apple Logo

  • Oh no! "Deprecated API Usage - Apple no longer accepts submissions of apps that use QuickTime APIs."

    Tried to submit an app to the Mac App store and I received this now:
    "Deprecated API Usage - Apple no longer accepts submissions of apps that use QuickTime APIs."
    Looks like a fix is in for Adobe Air (https://bugbase.adobe.com/index.cfm?event=bug&id=3680732), but I'm not sure if the same is being performed on Director.
    I'm not using any Xtras or anything, I think this is just embed within the Director builds.
    Looks like submitting anything to any Apple App store is going to be on hold for everyone until this gets fixed.

    Hi,
    Looks like this issue has been fixed in April 8th, 2014 release of AIR SDK. So the latest release 13.0.0.111 on May 13th, 2014 will have this issue fixed.
    Download Adobe AIR SDK
    Release Notes | Flash Player® 13 AIR® 13
    Thanks!
    Mohan

  • HT4623 my device no longer accepts the creation of any account

    my device no longer accepts the creation of any account

    Thanks for that. There was some code in the GET_P method which I had unremarked. I assume it was always remarked out because once I Unremarked it again all worked okay. I did not really look at the code but when I did I could see that it was being set to a Pickllist, which was not what I wanted.
    Many thanks
    Jason

  • After installing iOS5, my IPad no longer accepts my accesscode (I'm sure it is the right one)

    Why doen my IPad no longer accept my accesscode (and I'm sure it is the right one !!)

    Ooops.
    I upgraded my 10.6.8 system to 10.7.5. ..No problem, but my practice is to connect an ESATA dock to my macpro. install to the drive in the doc, use migration assistant to migrate my data and apps.   use the os in the doc for 2 weeks, if no issue then I delete the OS partiton in my Internal System Drive, do a carbon copy clone to the internal drive.
    I just did the similar to upgrade to mavericks.   I installed to a new hardrive in my docking station.   (black widow esata dock).  I noticed 10.9.1 is slow stayed with 10.7.5 as my operating system.  now and then I would boot 10.9.1 fire up the console utility and fix the issues that made it slow....
    Now I am at the "burn in stage" mavericks is now running fast and stable.   I'll use all my apps and if it does not break with the applications I run I will eventaully cc my 10.7.5 OS drive to the docking station, file the drive away.. and take my 10.9.1 drive in the doc and cc it to my internal system drive.
    I always wipe out a partion when installing a new OS.  Zeroing out is a bit more thorough, you will know if your drive is junk... but it's overkill for me.
    I figured repartion is ok.
    I'm 2 weeks away from doing a carbon copy clone from my 10.9.1 os drive in my dock to my internal drive.
    by the way.. I am running Mavericks on a 8 core macpro 2,1.  I have a modified bootloader that has an arbitration layer EFI32 to/from EFI64 emulated.
    pretty cool.
    And from new system standards, the old macpro stacks up pretty well:

  • HT201363 My ipad does no longer accept my password

    My iPad no longer accepts my password.  How do I fix this? Thanks!

    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

Maybe you are looking for

  • Keeps finding a "Object" not the real type.. I am really lost.. :D

    The calls to other objects work fine, I have testing all of them.. but! when I compile I get a error about finding a "object" type and not a String type at for(String blackStone : blackUnits.keySet())                if( getSetLib(blackStone) == 0 ) {

  • Officejet 7610 wide format: can't scan legal documents to pdf

    I am having a problem scanning legal documents from the ADF and/or off the glass. only cropped letter size gets created.  I believe I am using newest model with the newest drivers.  Just purchased and installed drivers from the internet.  I need work

  • Any Recommendations for External HD to use with Time Machine?

    Have been using Time Capsule wireless as my drive for Time Machine back-ups for a couple of years with mixed success. It also serves as a wireless router for internet service between all devices in my household. Was recently recommended to me to inve

  • Reinstalling OSX without a CD drive

    Hey my CD drive is broken and I need to archive and install (or just reinstall since it's Snow Leopard) any suggestions on how to go about doing that? I could buy a new CD drive too - would a third party one like by LG work just fine? Thanks so much.

  • PhotoSmart A646 & Windows 8 "Need to download the Driver"

    I am attempting to install the drivers for my Photosmart A646 on my new laptop that has Windows 8.1 installed. When I try to install the software I get a pop-up that says I need to go get the driver and install it. I click on the Get Driver button an