No longer have my pin, can i find it anywhere else...

as the title says, can i find my comes with music pin anywhere? i no longer have the box/pin/manuals etc the phone came in.
ive been trying to get nokia to let me register my pc on their music service, but since my last pc crashed (hard drive failure) i have to wait 90 days, i contacted support and they require my comes with music pin before they will release the 90 day lock and allow me to register a new pc.
so again is there any way to find this pin, or am i just going to have to wait?
thanks
Matty

thanks

Similar Messages

  • HT4623 There is no "Software Update" visible between "About" and "Usage" in General Settings, as shown in the example. And I can't find it anywhere else, either, so I am stymied at the first step of trying to update. Ideas?

    I am stymied at the first step of trying to update my IPad software, as there is no "Software Update" choice visible in General Settings. And I can't find it anywhere else, either. Ideas?

    Settings>General>Software Update is only available on iPad with IOS 5 and above.
    If you are using IOS 4, you need to connect to iTune (computer) to update software.
    http://support.apple.com/kb/HT4972

  • Can't find it anywhere else...

    I have two problems, i'm sure someone can answer them quickly:
    i'm also sure it's been asked before but i can't find it and it's driving me nuts cos i'm a noobie:
    First, even after i've rendered my footage on the timeline, if i move a section about afterwards, even only delaying a cue by a second, i have to render all over again before i can see it. This happens nearly all the time, but there are periods when it doesn't and i'd love to know how i can make it stay rendered, or at least watchable.
    Second, i'm sorry, but how the **** can i layer two visual tracks simultaneiously? i know i can dissolve really slowly, but how do i show two whole clips at the same time? i just can' figure it out.
    Please help, i'm desperate!
    Domhnall
    ()Final Cut Express

    The first problem happens if the captured material or video you;'re using doesn't conform to the sequence settings. Do the tow match exactly?
    Put one clip on top of another. Switch the canvas to image+wireframe. Shrink down the video on the tracks, adjust the opacity, crop the images, reposition, distort, rotate. It's all there in the canvas.

  • How do I attach a picture in iPhoto to an email?  I can't find it anywhere else.

    How can I attach a picture in iPhototo a gmail?  I can't find the picture anywhere else on my computer.

    Are you accessing the account through a client (like the Mail app on your Mac) or via a web browser (signed into gmail.com website)?
    If via a client, you should be able to email from within iPhoto or drag the photo into the new messge window.
    If you need to upload it to webmail then export the photo from iPhoto to a convenient location so you can upload it to Gmail.

  • I took a picture and add it to a contact. Now that picture only appears on the contact list but I can't find it anywhere else in the ipod and I can't share it. How do I recover it?

    I took a picture a few days ago and I linked it immediately to a contact. Now I'm looking for it in order to share it but it doesn't appear on my pictures, I can only see the small version linked to the contact I assigned it to. Is there a way to recover the full version of that picture in order to share it? Thanks!

    - Did you sync after you took the picture?  If yes could you have copied it to your computer and then deleted it from your iPod?  Have you looked on your computer?
    - Have you tried resetting your iPod?  Nothing will be lost:
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.

  • HT1657 I rented a movie a few hours ago and never finished it.  I can't view it on my Apple TV nor on my Computer.  When I go to rent it again it says you have already rented this movie, but I can't find it anywhere.  How do I watch the remainder of the r

    I rented a movie a few hours ago and never finished it.  I can't view it on my Apple TV nor on my Computer.  When I go to rent it again it says you have already rented this movie, but I can't find it anywhere.  How do I watch the remainder of the rental?

    I had the same issue with my apple tv 3rd generation. I rented Sinister and selected the "rent and watch now" option. Half way through the movie I accidentally pressed the menu button. When I looked for the rented movie on my apple tv I could not find it. Not even above the movie pannel where "purchased" and "top movies" comes up on the main menu. the apple tv suggests to go to settings>downloads but I don't have that option. I did go to settings> itunes store> check rentals but that didnt work either. It took too long to even check. Thank you because this SOLUTION worked great.
    SOLUTION: How to reset apple tv 3 3rd generation to view rented movies:on the apple tv remote: press and hold "menu" to go to the main menu. Select SETTINGS> GENERAL >RESET >RESET ALL SETTINGS. After the apple tv resets, input all your information again and your rented movies should be visible when you cruise above the "movies" section. THANK YOU!!
    Apple needs to solve this issue because honestly it took me 3 hours and a half to watch a movie that only lasted 2 BECAUSE I wast trying to solve the issue, reseting and all. blahh.

  • I forgot my passcode on my iPad and it was synced to a different computer that I no longer have. What can I do about this?

    I have forgotten my passcode on my iPad. It was synced to a different computer that I no longer have. What can I do about this and if it at all possible without losing everything that was on it. Thanks for the help.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
    ````````````````
    Sync Your iOS Device with a New Computer Without Losing Data
    http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive
    https://discussions.apple.com/docs/DOC-3141
     Cheers, Tom

  • I was backing up my iPhone and importing photos onto iPhoto at the same time , then suddenly it says no more space available (i had 48GB before i do this and now i have 18GB) i can't find the back up or the photo anywhere , how can i delete them ?

    i was backing up my iPhone and importing photos onto iPhoto at the same time , then suddenly it says no more space available (i had 48GB before i do this and now i have 18GB) i can't find the back up or the photo anywhere , how can i delete them ? i dont need the pictures or the back ups , i want to delete them but they are not there

    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
    iPhoto ▹ Empty Trash
    Do the same in other applications, such as Aperture, that have an internal Trash feature. Then reboot. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown asBackups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Reboot and it should go away.
    See this support article for some simple ways to free up storage space.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
    Install ODS in the Applications folder as usual. Quit it if it's running.
    Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with ODS, quit it and also quit Terminal.

  • Had to uninstall iWork trial since I bought the pages app and it wouldn't let me print or save.  Now the app store says I have pages installed but I can't find it anywhere to open and use it.  I'm not very computer savvy and am getting frustrated!

    Ooops, guess I didn't need to post everything in the title - sorry!  I bought the pages app - but couldn't save or print so with some online searching found that I had to uninstall the iWork trial which had expired.  I did that - but now I can't figure out how to re-install the pages app!!  The app store says it's installed, but I can't find it anywhere to open and use it.  I'm not very computer savvy - and am a first time Mac user and am getting extremely frustrated!  I e-mailed some help center and they can't seem to help me either.  I would appreciate any help/advice that can fix my problem - thanks in advance!!

    OK Apple has stuffed up the demo version upgrade process so the first thing you need to do is get rid of the demo.
    That includes getting rid of the files in the system.
    The instructions how to do that are here:
    Note That where you see / that is the sequence of folders, each nested inside each other.
    User/Library/Preferences the com.apple.iwork.Keynote.plist
    Means the User (you, the little home icon, whatever you are called on your computer) then the Library folder inside that and then the Preferences folder inside that.
    Lion initially hides the System folders from you so you have to go to the Finder > Menu > hold down the option key and click on GO > Library to see it.
    Peter

  • I Have an older IPod Mini that was synced to a computer I no longer have. How can I get the song on it to a new Library without losing the songs

    I have an older IPod Mini that was synced to a computer I no longer have. How can I move the songs on it to a newer library without losing the songs?

    iOS: Unable to update or restore

  • HT201272 I no longer have any of my pcs that I had registered on iTunes and I am at my limit on the number of registered devices  how do I unregistere old machines that I no longer have so I can get my old music that I have down loaded.?

    I no longer have any of my pcs that I had registered on iTunes and I am at my limit on the number of registered devices  how do I unregistere old machines that I no longer have so I can get my old music that I have down loaded.?

    Go to your account in the iTunes Store and look for the De-authorise All button in your account's details. Use the De-authorise All and then authorise the PCs you still have.

  • Does anybody know if Windows 8 is causing a problem with iTunes?   Many songs on my old iPod are now missing in my iTunes library and I can't find them anywhere.  Also, I have a new iPod and am afraid of using it for fear of something else going wrong.

    Does anybody know if Windows 8 is causing a problem with iTunes?  Many songs on my old iPod are now missing in my iTunes library and I can't find them anywhere.  .  Also, I have a new iPod and am afraid of using it for fear of something else going wrong.

    Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

  • I have a mac book prob that is on OS X 10.5.8 how do I update to 10.6 I can't find it anywhere?

    I have a mac book prob that is on OS X 10.5.8 how do I update to 10.6 I can't find it anywhere?

    Snow Leopard DVD
    You can get it only by phone now from Apple.
    SL is still available from Apple phone sales -
    In the US, call 1-800-MY-APPLE and ask for a sales assistant. Last quoted price was $19.99 for the single-user and $29.99 for the family licence.
    For other countries, check here; http://support.apple.com/kb/HE57
    Don't forget to ask for Sales; the tech support guys can't help.
    Apple UK Sales;  0800 048 0408 (freephone) or 0871 508 4400 (beware - premium rate)
    UK price £14

  • I just updated to ps cc 2014 with help from a chat person and all of my actions have dissapeared how can i find them?

    I just updated to ps cc 2014 with help from a chat person and all of my actions have disappeared how can i find them?

    Do you still have your old version of Photoshop loaded? You need to open that, and save your actions so that you can open them in 2014.

  • I downloaded an AudioBook onto my iPad due to battery life.  Now I want to have it on my iPhone which is one of the appliances that is authorized for my icloud account, but I can't find it anywhere.  What gives?

    I downloaded an AudioBook from iTunes onto my iPad due to battery life.  Now I want to have it on my iPhone which is one of the appliances that is authorized for my iCloud account, but I can't find it anywhere other than the iPad.  How do I get access on my iPhone?

    It will only be where you put it.
    If it is on the ipad then transfer it to your computer, File>Devices>Transfer Purchases, then sync it to your iphone

Maybe you are looking for

  • OSX: Adobe Creative Cloud unable to update (stall at 50%)

    Hey experts, ever since signing up for Creative Cloud I have been unable to update any application as my regular user on OSX. After exchanging 23 emails with the Adobe support in 2013 I finally gave up and created a workaround in the hope that the Ad

  • Motherboard details for HP DV6 1150el?

    Hi,  I am trying to work out what the motherboard details are. In particular who is the manufacturer and specifications.  someone posted the manual about the DV6 series: useless! there's not this information.  Please help! thank you,  unlocated

  • ADSL connection dropping every 1 - 5 minutes

    Even though I had reconnections from the very beginning, it has gotten a lot worse over the last week. The connection now rarely survives a time frame longer than 5 minutes. Snippet from the router log: 21:03:41, 15 Dec. ( 2013.470000) ETHoA is up -

  • SQL Server 2012 Standard Support for Lync 2013

    Hi, Does SQL 2012 Standard version support Lycn 2013 , I am planning to have following features. 1- SQL 2012 Mirroring 2- Monitoring Role on FE Servers Regards Usman Ghani Usman Ghani - MCITP Exchange 2010

  • Error Code 201 when installing MUSE update on Windows 7

    I am running Windows 7 and upon opening MUSE, I am prompted to install an update. When I click on the install, I get an Error Code 201. What is the fix for this?