No Longer have "Sent" mailbox?

Hi, I used to have a box on the left side of mail under inbox, drafts, trash that said "sent mail." It's no longer there. I have one called outbox. What's up please? How can I get back the Sent. Thanks.

Hi! The outbox is usually there if an email was unable to be sent or if you saved a draft. have you actually "sent" any mail successfully? You'll probably have to have successfully sent something for the sent icon to appear. Tom

Similar Messages

  • What do a about messages that have no mailbox?

    Yesterday I rebuilt Envelope Index and now I'm looking at a bunch of messages that no longer have a mailbox associated with them and interestingly enough you cannot sort them in the viewer by this column.
    The ones that have no mailbox look like this
    The message from poipu <[email protected]> concerning “[Rails] Re: actsascommentable release” has not been downloaded from the server. You need to take this account online in order to download it.
    I'd like to be able to isolate all of these and purge them all together.
    How can you do that?
    I'm not sure there's any column that indicates these. I'd like to be able to write a piece of applescript that just goes thru and gets rid of all of these but since they exist in the index but not in the filesystem as files I'm not sure how to do that.
    And all of this after rebuilding the index.

    First, consult Mac OS X 10.4, Mail: Messages seem to be missing, or "Message has not been downloaded" alert appears when opening for the other two remedies Apple suggests for this.
    Also pay attention to the caveat about having enough disk space in the rebuilding link it references, & check the info in Mac OS X 10.3, 10.4 Mail: Overstuffed mailbox is unexpectedly empty for relevance.
    Hopefully, one of these references will help.

  • I have sent my iPod back for servicing because it is cracked, with some dispute with Apple I have managed to get a brand new iPod Touch. Just wondering if anyone has had this problem how long did it take from "Replacement Product Pending" to get bck to UK

    I have sent my iPod back for servicing because it is cracked, with some dispute with Apple I have managed to get a brand new iPod Touch. Just wondering if anyone has had this problem how long did it take from "Replacement Product Pending" to get back to the UK

    Not really. Is say "pending"
    pend·ing 
    /ˈpendiNG/
    Adjective 
    Awaiting decision or settlement.
    Preposition
    Until (something) happens or takes place: "they were released on bail pending an appeal".
    Synonyms
    adjective. 
    pendent - undecided - unsettled - outstanding - pendant
    preposition. 
    during - until - till - to

  • Messages In Inbox and sent mailbox have disappeared

    I have been using my mac e-mail for a considerable time with no problems however in the last month, I have lost virtually all of my messages in both my inbox and sent mailbox> I have checked my preferences and the deletion of e-mails is set to 'never'. Does anyone know what might be causing this and how to stop it from happening. Thanks.

    You’re welcome.
    If the *.emlx files associated with those messages are gone from the filesystem, rebuilding mailboxes or re-creating the index cannot make them reappear.
    There is no way to know what may have happened if you don’t know when it happened and what did you do that could have a bearing on it. What you mention about moving data between computers could certainly have a bearing on it when it happened the first time, but there is no way to know what the problem exactly was in that case either with the information you’ve provided...
    If the messages are nowhere to be found and you don’t have a backup, you may try to salvage as many deleted *.emlx files as possible with a data recovery tool such as Data Rescue II, TechTool Pro, or FileSalvage. Of these, the only one I know for sure that can currently recover deleted *.emlx files is FileSalvage. Beware, however, that anything you’ve done with the computer since the messages were deleted may have caused them to be overwritten, which makes me believe your chances of recovering them now are pretty low...

  • I have a mailbox with hundreds of emails that I will no longer use, but I want to save it outside of TB. Is there a way to do that?

    I have a mailbox with hundreds of emails that I will no longer use, but I want to save it outside of TB. Is there a way to do that?
    Thanks

    I want to archive the mailbox folder within Thunderbird so I can delete it from the Thunderbird I use everyday, but could access later if I needed to.
    Thanks

  • TS3276 Help - Mail is not sending or receiving any e-mails . Connectivity Doctor is showing green lights.Have rebooted but same issue - just a circle continually going around the Sent mailbox and 2 e-mails waiting in Outbox.

    Help - Mail is not sending or receiving any e-mails . Connectivity Doctor is showing green lights.Have rebooted but same issue - just a circle continually going around the Sent mailbox and 2 e-mails waiting in Outbox.

    Is your web browser working normally?

  • I have an 8GB ipod touch and suddenly I'm able to access only the "sent" mailbox of Mail and not the other mailboxes.  I turned on and off.  I connected it to MacBook but still I can't access the other mailboxes.

    i have an 8GB ipod touch and suddenly I'm able to access only the "sent" mailbox of Mail and not the other mailboxes.  I turned on and off.  I connected it to MacBook but still I can't access the other mailboxes.

    - Try resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Can you access the mail on another device?

  • HT4623 I have sent my i phone through royal mail on 8th February 2013 but still it is not deliver to apple. I used the empty box sent by apple to me sent my i phone to them. Can any one advice me how long it can take to get back my iphone from repair?

    I have sent my i phone through royal mail on 8th February 2013 but still it is not deliver to apple. I used the empty box sent by apple to me to sent my i phone to them. Can any one advice me how long it can take to get back my iphone from repair?

    moynul82 wrote:
    but still it is not deliver to apple.
    If Apple has not received your phone, obviously it can't even be evaluated for warranty purposes. Have you tried calling AppleCare to verify whether they have received the phone or not?

  • My SENT mailbox is empty on my computer, mail up til yesterday is on mobileme on browser. I used to have 'my .mac account' and 'on my computer' as mailboxes. 'On my computer' has disappeared. HOW can I restore my SENT mail list? tnx

    any help or suggestions would be most welcome. The contents of my sent box disappeared once before, but came back after relaunching. Not this time.
    tnx eliza

    Thanks, Chris ~
    Sync has not worked (yet) ~
    I'll try archiving from mobileme mail on browser... I can't open the SENT mailbox on TIme Machine on my computer. [It's not the end of the world to lose my Sent Mail, bcz it is still availble via brwoser, but I prefer to be in charge of my computer, not it in charge of me :-D]
    So much to learn!

  • In the sent mailbox how do I change it to show to whom it was sent rather than have it show me who it was sent from as this is always myself?

    In the sent mailbox the headings are Subject - From - Date. I want it to show Subject - To - Date. This would allow me to scan my sent messages for a message I sent to someone. Now it shows From and this of course is my email address which I already knew.

    Can you not change the columns in that window and use Recipient instead of From? There should be a small button at the end of the column headers.

  • Is there a way to fix 'Sent mailbox could not be created?'

    I have OS 10.8.5 and am using Mail as the mail program, since November. I have not had this problem before.  I have four accounts in mail, iCloud, Gmail, Roadrunner and Earthlink.  The main one i use is Gmail.  Today i noticed that there was an exclaimation point next to my Gmail Sent mailbox.  i opened the mailbox and it showed only one sent message that i sent earlier today.  There should have been a few months of mail in the mail box, maybe 30 to 50 messages.  i clicked on the exclaimation point and the message said: 
    The Sent mailbox could not be created on the mail server.  The local "Sent Messages (Gmail) mailbox was created instead. Mail has changed your account's Mailbox Behaviors preferences to use the local "Sent Messages (Gmail)" mailbox.
    i don't know what this even means.  My other account mailboxes have their mail in them, only the Gmail mailnbox is not created (although it does have that one message in it).  There wasn't anything different i did that would change any preferences that i know of.  I see the Gmail Sent messages mailbox at the bottom of the mailbox list and the missing messages are there, but instead of listing the name of the recipient under a To: column, instead there is a From: column, and my name is all that is listed. There is no To: column.  I need to know who the messages were sent to if i need to search for one later. i want the recipient to be idendified in the header, as it is in my other Sent mailboxes.
    There is one thing that happened right before this occurred.  I got a brand new Time Capsule and replaced my very old Airport Extreme with it. I didn't change anything. i just replaced the old base station with the new one, keeping all settings, network names and passwords the same, i just switched the hardware. 
    After setting up the Time Capsule, when i checked my email, i found this problem with my Gmail mailbox missing.
    I found this problem raised in a few other postss on these discussion forums, but there was little or no discussion on the threads. None of them mentioned a new Time Capsule. i'm hoping someone who reads this can say what might have caused this and where the mail box is, and how to get it back. 

    Glenn--thanks for the reply.  I think i tried your first suggestion---i highlighted the Gmail account Sent mailbox and went to the Mailbox menu, went to 'Use this mailbox for,' but all of the four options were grayed out (Sent, Junk, Trash, Drafts). i tried highlighting (or selecting) other mailboxes in the column on the left, including the ones on the server and the ones 'on this mac.'  No matter which one i selected, the options were grayed out. Do you know why they would be grayed out?  Am i not understanding what to do, or is there some other reason?  i'm in Classic mode, in case that matters as to what's in the left column. 
    I have not yet tried disabling the Gmail account. i was going to, but when i went to Preferences > Accounts > Gmail, i saw and remembered that i had changed one of the settings not long ago, a week or so--where it says "Use only this server" under Outgoing Mail Server (SMTP) i had unchecked 'use only this server,' since none of the other accounts had that checked.   So i rechecked it and am wondering if that would protect against what happened. 
    I feel nervous about disabling the account and removing it from Mail and wanted to ask you, will everything come back when i re-enable it? 
    Thanks

  • Apple Mail Client - No Messages in Sent Mailbox

    I am using the Apple Mail client with Yahoo! IMAP. For some reason, sent messages no longer appear in the Sent Mailbox. Why is that?

    Try rebuilding the mailbox. This can take awhile if you have a lot of mail.
    Rebuild mailbox

  • Sent emails not stored  in Sent Mailbox

    My outgoing emails are apparently being sent (I hear the swoosh, and spot checks with the recipients confirm the delivery,) but the outgoing emails are no longer copied into my Sent Mailbox.
    Any ideas, please?
    Thanks,
    Ricardo

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.
    The usual reason why updates fail or mess things up, or things don't load/run, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
    Some people get away without Repairing Permissions for years, some for only days.
    If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
    If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates again, or even do an A&I if you have enough free disk space.
    The combo update for PowerPC-based Macs...
    http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
    The combo update for Intel-based Macs...
    http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
    Repair Permissions after re-install, then reboot again.
    If all the above do not resolve the problem, then it's time for an Archive & Install, which gives you a new OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space...
    http://docs.info.apple.com/article.html?artnum=107120

  • Can't see sent mail in Sent Mailbox

    I'm getting the message " the e-mail has not been read from the server" when I try to look at the e-mails that I have sent. This is driving me crazy!!!!
    Please, someone help me with this!
    Very Grateful for a speedy reply
    Nina

    Nina,
    There is a script that will split these overstuffed mailboxes of the structure used in Mail 1.3.11 and earlier, so we have a fall back solution. Don't fail to keep a copy for possible use with the script, or assure the original is preserved.
    How large is the mbox file in the Package of the Sent Messages.mbox?
    How long did you wait for Rebuild to try and finish -- this can take quite a long time? It is normal for everything to disappear during Rebuild, but it should come back if successful. Regardless, it does not erase anything, assuming you have plenty of free space on the hard drive, and that is not a limitation?
    If you cannot get Rebuild to work, click on my name to the left of this post, and look in the bio line of my resulting Profile for my email address. Send me an email, and it would be good to provide a screenshot of the Package of this Sent Messages.mbox. I can then send you the Script and instructions for using, if nothing else works.
    Btw, did you remove the Sent Messages.mbox from the Account folder, so new messages you send can be properly accessed?
    Ernie

  • Sent Messages are not saved in Sent Mailbox

    It was working correctly but suddenly all my sent messages are not saved in the Sent Mailbox. I follow all the Mail Help instructions but nothing seems to work. Hope that someone can help me. I asked for help on december 14 but it was not helpful

    The mailboxes drawer contains all mailboxes under In, Drafts, Sent, Trash and Junk (if you have Junk Mail set to automatic).
    If you have a .Mac or IMAP type account, you also have an account named icon for the .Mac or IMAP type account at the bottom of the mailboxes drawer. It is named by the Account Description you provided/entered for the account under the Account Information tab for the account preferences.
    If you select save Sent messages on the server for a .Mac or IMAP type account, the account's Sent mailbox will be available under the account named icon in the mailboxes drawer along with all other server stored mailboxes.
    To open the account named icon for your .Mac account to reveal the server stored mailboxes including the account's Sent mailbox, select the black triangle beside your .Mac account icon in the mailboxes drawer pointing it down.
    Select the account's Sent mailbox and at the menu bar, go to Mailbox > Use This Mailbox For and select Sent.
    If you deselect store Sent messages on the server for the account preferences, the account's Sent mailbox will be available under Sent in the mailboxes drawer and you can't use "Use This Mailbox For" for mailboxes stored locally on the hard drive. It can only be used for .Mac or IMAP type account mailboxes that are stored on the server.

Maybe you are looking for

  • Corrupted file structure in iPhoto library?

    This is a little like the "disappeared library" problem that someone else reported, but my library looks OK. It's just that several years worth of photos have disappeared (i.e. folders show as empty). A quick check into the library folder suggests th

  • Journal Problem with Replicating another dimension on User Defined

    Hi experts, A curious thing is happing on development, I follow the HTG "SAP Business Planning and Consolidation for NetWeaver - Journals.pdf"; and this generate fine the journal, but when I was testing, doing a simple journal entry, a trouble occurr

  • LV prototype as an add-on to a text editor

    Hello. I'm new to the LV community online. I'm looking for advice on how to use LV as a stand alone text editor or preferably an add-on for editors like Word, Lasik, or even Notepad. What I'm trying to do is make a prototype of a text editor, but I d

  • Can not retrive total result for 0HDCNT_LAST(number of  employee)

    Dear all: We tried to create query from cube 0PA_C01. We used 0ORGUNIT and Number of Employees(0HDCNT_LAST) in the row and column.Also we created a formula to get total result of number employees by SUMGT (0HDCNT_LAST). But when we executed this quer

  • I cannot paste a useable link when selling with ebay but can with IE

    Hi...If I use Firefox when selling on ebay and I want to leave a link in my listing to photos from another site. The link shows up but it will not function when someone clicks it? This feature works fine when using internet explorer. I am assuming I