No longer listed in browser or power search

The audio podcast "The O Line Mysteries"
http://itunes.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=291723445
had been listed in the power search under "comedy/ english" since September 2008 but since about mid April the show can not be found under the browse or the power search. The only way to find the show is to type in the name under search. I'm curious about why this change in the search for the show? We have made no changes to the codes or listings and have been posting weekly for 26 episodes. Why am I not able to find my show through iTunes search options? The website address is http://www.olinemysteries.com
Thank you.

When you use 'Power Search' and select 'Comedy/English' with no other data, you might expect it to bring up all the comedy podcasts in English. However, this would be quite impossible, because there must be hundreds if not thousands. So what you get is what are called 'featured' podcasts - selected specially by Apple. They explain it here:
http://www.apple.com/itunes/whatson/podcasts/specs.html#getfeatured
Most people don't make 'featured' status, and so can only be found by searching on the title (which works fine in your case). You were lucky to be featured in the first place, but the decision about whom to feature and when to stop featuring them is entirely Apple's.

Similar Messages

Browse and power search crashes itunes

I do not understand. I am using itunes 5 (I don't want to upgrade to 6) and everytime I click "Browse" or "power search"
in the itunes store window, itunes crashes.
I tried uninstalling Quicktime, and itunes, then installing quicktime standalone, reboot, reinstall itunes 5, but it does the same thing. itunes does not crash on my laptop, just my desktop. I don't know when, or why this is happening, but it seems like it was working fine last week. I even uninstalled a Windows update, known to cause problems, and that didn't help.
Here's what it shows in the event viewer:
Event Type: Error
Event Source: Application Error
Event Category: None
Event ID: 1000
Date: 5/20/2006
Time: 2:28:08 PM
User: N/A
Computer: MASTER
Description:
Faulting application itunes.exe, version 5.0.0.35, faulting module quicktime.qts, version 7.0.2.120, fault address 0x0000dac5.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 46 61 69 6c ion Fail
0010: 75 72 65 20 20 69 74 75 ure itu
0018: 6e 65 73 2e 65 78 65 20 nes.exe
0020: 35 2e 30 2e 30 2e 33 35 5.0.0.35
0028: 20 69 6e 20 71 75 69 63 in quic
0030: 6b 74 69 6d 65 2e 71 74 ktime.qt
0038: 73 20 37 2e 30 2e 32 2e s 7.0.2.
0040: 31 32 30 20 61 74 20 6f 120 at o
0048: 66 66 73 65 74 20 30 30 ffset 00
0050: 30 30 64 61 63 35 0d 0a 00dac5..
I also have a Dr. Watson log, if anyone wants to see it.
Thanks!!
Dell dimension 4400 Windows XP

Same problem here. I've spent two hours repairing permissions, etc. I haven't added anything new to my computer so Apple has changed something. I don't have time to upgrade. I don't care about video, or TV. I wanted some new songs for the Holiday, but I guess it won't happen. Bloatware. Apparently they've "broken" iTunes 5.
iMac G5 10.3.9
dr

Just downloaded the latest version of iTunes. Can't find "Power Search" anymore to locate specific songs or artists? Using "Browse" takes waaay too long. Any suggestions?

Just downloaded the latest version of iTunes, but can't find "Power Search" anymore to locate specific songs or artists quickly? "Browse" takes waaay too long. Any suggestions?

http://www.apple.com/feedback/kaywerty wrote:
A rather long winded way of asking if anybody knows if it's possible to have multi-windows open
It's not possible.
Suggestions here -> Apple Product feedback

Where is Power Search on the Itunes Store site? I can no longer find it.

Where is Power Search on the Itunes Store site? I can no longer find it.

Sharing an app does not give a copy of the app to anybody else, you will only be sharing an image of the app.
It's possible that the developers of those apps have temporarily (e.g. if there is a problem with them or they are putting an updated version in the store) or permanently removed them from the store. Any links that the developer's have on their website should take you to the store, that is the only place that you can download apps for iOS devices.
You could try contacting the developers and see if they are planning on putting their apps back in the store, until if/when they do then your friends won't be able to download them (and you won't be able to redownload them, so if you haven't already done so you may want to copy the app to your computer's iTunes library).

Macbook froze while online. hard shutdown. when it restarted, an error message appeared saying finder shut down unexpectedly containing a message box with a long list of technical jibberish. after clicking OK that it would send an error report to Apple,

macbook froze while online. hard shutdown. when it restarted, an error message appeared saying finder shut down unexpectedly containing a message box with a long list of technical jibberish. after clicking OK that it would send an error report to Apple, the same error message box appeared again and again every time OK was clicked. Now the macbook will not turn on at all

If you're able to boot, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post "shutdownStall" or "hang" reports.
If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all.
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.

ITunes store pages formatting is one long list

Hi all,
The iTunes store some how is formated in plain html. Looks weird. The home has big pictures one after the other Then when you scroll down, the Music is a list of album picture and then a bullet list of the album name and the title. Something like the following:
Music
See All
[A picture of the album]
* Redemption Song (For Haiti Relief) [Live from Oprah] - Single
* Rihanna
[A picture of the album]
* Today Was a Fairytale - Single
* Taylor Swift
Everything has become a straight long list. My default browser is Chrome, it didn't help if I changed the default browser to firefox and rebooted. Not sure how to post a screen capture of what is happening. Hopefully somehow there are someone experienced this. Not sure if I put in the right keywords for searching, but wasn't able to find related issues.
Your help is appreciated.
Thanks,
Alice

Based on the iTunes.exe time stamp it's Oct 28, 2009 8:21PM ET. Funny thing is that the release date I can find on the web is Oct 30, 2009. Is that true?
Sometimes I see October 29 (Wikipedia for example). So when international date lines figure into things, I reckon you might well have got it on the day it was released (depending on where you are based).
So that timeframe looks right ... in the first days of the iTunes 9.0.2.25 installer, it contained an AAS 1.0.1 and a QuickTime 7.6.4. Then the Safari 4.0.4 installer (containing an AAS 1.1.0) came out on about 11 November. For a while I *really was* advocating a Safari 4.0.4 install to fix some other Store problems, because it was the only way to get an AAS 1.1.0 on the PC. (People used to look at me funny.) Then on about ... 18 November? QT 7.6.5 came out, and that version of QuickTime and AAS 1.1.0 got included in the iTunes 9.0.2.25 installer from then on.
My notes are a bit sketchy, but there was a hint that AAS 1.1.0 fixed some iPhone syncing trouble too. (I wasn't working on that much back then, though.)
But the important thing is that your Store is displaying properly again. (I'm glad it wasn't malware either ... my heart sank when that 306 code got mentioned.) Glad to have been of some accidental assistance, Alice!

How do I get more effects in my action box? I am only showing a few, like BOTTOM BORDERS, LOSE WEIGHT AND SPECIAL EFFECTS. That is all. The turotials I've checked into all show a long list of effects in the actions box. If anyone could help, I appreciate

How do I get more effects in my action box? I am only showing a few, like "Bottom Borders, Losing Weight, Resize and Crop, and Special Effects. And they do not list but a few effects. When I have watched the tutorials, they are showing a long list of effects in the action box. (with a side space bar) I do not. When I have clicked on the little arrow at top, and clicked "Load Actions", a box comes up, but it is blank,saying "no items match your search". I'm lost! If someone could help, it would be much appreciated! I would like to start using this.
Thank you.

Apple Computer Customer Relations:
1-512-674-2500

I have a long list of gibberish files, in Preferences, in my Library. What are they? How did they get there? Can I delete them?

I have a long list of gibberish files, in Preferences, in my Library. What are they? How did they get there? Can I delete them without causing a problem?

Here is one thing I found googling for WebEx:
http://www.webex.com/why-webex/overview.html
(The x64 would most likely mean 64 bit). It may be a Windows based application/plugin, but since I had never heard of either, I'm only guessing there. If you do a search systemwide for it and don't find it plus don't know why it's there, I'd say throw it in the trash (don't empty it yet - make a note of the file path just in case you do have something installed that needs it so you can move it back).
Glad to hear it's not a torrent; some people use those not realizing that quite often there is a price to pay for downloading stuff for free that costs money elsewhere - the software packages quite often include little "add-ons" = malware which you really don't want.

Long list of "software" problems on iphone 4.

My wife and I have iphone 4s, purchased about a year apart (I got mine as a cheaper leftover after the 4S came out.) My phone is fine but hers is having a long list of weird problems nothing seems to permanently fix. It is about 2 1/2 years old, and covered under a product replacement plan from Future Shop, where we got it. (Our city just got it's first Apple Store over the holidays.)
The problem is all of her issues seem to be software or "network" related, yet all the common fixes/tests are not yielding any results.
The biggest issue with the phone is with iMessage. I know it is normal for the occasional iMessage to send as an SMS instead, especially if there is a hiccup in the network. The thing is, hers does this all the time, sometimes mid-conversation. If I send her 3 messages in quick succession, she might get #1 and #3 as iMessages but #2 wont appear until 15 minutes later as a text message--making trying to converse via message really annoying. It has done this for several months now, getting progressively worse. We have 3 friends who are our neighbors in our apartment building. We can send a group iMessage to everyone, everyone will get it as an iMessage, but she will get it as a text, usually anywhere from 10-20 minutes later. One of our friends can't even send her an iMessage--he will only ever get the green "send as text" option for the send button, even if they are in the same room, and connected to the same wireless network. When another friend in the same apartment tries to iMessage her from her iMac, it tells her "that is not a valid number for iMessage"--yet it clearly is, because iMessage DOES work...sometimes. All 5 of us are on the same network, Virgin Mobile, so it is not the network--none of us have any problems except for her. It is frustrating because during the day we are both at work and don't have coinciding breaks and sometimes I NEED her to get a message, and it is bad now to the point where I can't be guaranteed she got my message until I get a response back later on. We have not tried turning "send as SMS" off yet, because we don't mind the phone sending an iMessage as a text when iMessage is not available--what the problem is is the delay, the likelihood she may never even *get* the message, (sometimes it doesn't send at all.) and the fact that it will still do this even on a strong full signal or wifi (the wifi network in our apartment is fine, our computers, xbox, 3DS's and my phone never have any issues.) We can try it, but my worry is that if something is wrong with iMessage, turning off SMS will mean she'll never get some of these at all. (more often than this happens as it is, mind you)
Her safari is also extremely laggy, which seems to hint at a connection problem, maybe.
The phone has been reset 3 times. Once, we reset it and restored from backup. No dice. Then, future shop reset it from the phone itself while they had it over night trying to duplicate the issue. Still no dice. Finally, on the advice of a future shop tech, who said they can't do anything unless we can prove a hardware failure of some kind, advised resetting from itunes and NOT restoring from backup. So we did that--the phone was completely reset as "new phone", and nothing has been restored from backup, only contacts from iCloud. Right now the phone has only 2 apps re-downloaded on it, and a few songs, and it did it again earlier today. So, still no luck. (It hopefully goes without saying we have verified all her software updates are done and everything is fully up to date.)
After the reset, a new issue surfaced--it was vibrating randomly. After troubleshooting, we discovered she was getting vibrate alerts from email, despite the fact that email push notifications are OFF and her email app was closed at the time. She had to turn off vibration and sound for email to get it to stop. Now, maybe that is what she has to do, but my iphone has push notifications off as well--but sound and vibrate still on--but will only beep/vibrate if the mail app is open. Otherwise, I don't get the notification. (Maybe my phone is broken, and hers is doing what it should for once? LOL) The thing is, she never touched that setting the first time she got the phone, and has NEVER received vibrate alerts for email. Why suddenly after a full reset would things be enabled that were never on in the first place?
So I am stumped. It is a huge inconvenience to keep resetting this stupid thing, and we don't really want to pay the genius bar to look at it, but I can't help but feel like these recurring problems can't be software related when we've had this reset so many times--and it's not "network" issues because she is the only one. We have tried checking the diagnostic record for panic.plist (wishful thinking I guess), read through a ton of posts here, and tried what we could... any further advice/what we can try? Is there any chance this IS hardware, something corrupt in the phone memory/storage? An issue with the receiver? If so, how do we prove it? Can the genius bar scan it somehow?

If you have an Apple Store in town, setup a genius bar appointment. The genius bar tech should look at the phone and try to diagnose the problem free of charge. They may not want to fix it free of charge, but they should perform their diagnosis and tell you what they find for free.
It sounds to me like her iPhone is losing its connection to the Apple iMessage servers. You might try actually turning off iMessage snd signing out of iCloud on her iPhone, then after a restart of the iPhone sign back into iCloud, then turn iMessage back on. There is no guarnatee that this will resolve her problems, but it might help. If her iPhone is not connected to external power, and it has been more than 10-15 minutes since she last used it, it has probably turned off the wifi radio, and will be depending upon cellular data for the iMessage traffic to flow. This could easily account for the delays she is seeing, and even it dropping back to SMS, especially if you have poor cellular data coverage. If this is the case, then getting something like a Mophie Juice Pack Air for her iPhone might help, as it would allow her iPhone to be connected to external power (the Juice Pack) thus keepig the wifi radio on more.

When i double click on Mac HD the view has changed and my user name is no longer listed on the left. How can I reset this

When i double click on Mac HD the view has changed and my user name is no longer listed on the left. How can I reset this?

Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

ITunes crashes when doing a power search. I get a Microsoft Visual C Runtime Library Error message: Program C:\Program Files (x86)\iTunes\iTunes.exe R6025. Pure virtual functional call. If I select ok, Windows 7 pops up with iTunes has stopped working

iTunes crashes when doing a power search. I get a Microsoft Visual C Runtime Library Error message: Program C:\Program Files (x86)\iTunes\iTunes.exe R6025. Pure virtual functional call. If I select ok, Windows 7 pops up with iTunes has stopped working and then it shuts iTunes down. Anyone else every have this issue. Any ideas on a fix?
Thanks,

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Windows Restore no longer list newer backup sets after restoring an older backup set ???

I'm running Windows Server 2008 R2 x64. I run Windows backup every night and grandfather the backup disks every month. I start each month (and tape) with a full backup, then do incremental backups for the rest on the month.
I accidently destroyed my RAID 5 by disconnecting a couple disks while sucking the dusk out of the machine. I remove dust at least twice a year. This time I had to recreate my Intel Rapid Storage Technology that is a feature on my motherboard.
After which, I successfully restored the array from the latest backup.
While dusting my UPS, I accidently cut power to my server. This clumsy accident ended up corrupting the data in the array. The array itself was intact, but there was unrecoverable corruption of my Server 2012 R2. I had to repeat the windows
server restore again, but the newest backups including the one I already recovered earlier, are no longer listed.
QUESTION: How can I get Windows Server R2 Restore to recognize the newest backup I restored hours earlier?
- Michael Faklis
- Michael Faklis

Hi Michael,
I assume you are using GUI to do the recovery so please test "wbadmin get versions" to see if the needed restore versions are listed.
If so, try "wbadmin start recovery" to see if it will work.
Meanwhile if it will still not work, which restore point is the newest available one? It could be caused if incremental backup are corrupted cause of VSS metadata corrupted - so only a newest full backup will work in this moment.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I want to sync tasks in Outlook with my iPhone. I have tried Toodledo (not good) and Todo. Todo works, but it cuts off most of the text. I only get the beginning of my (long) lists. Any ideas how I can solve this problem?

I want to sync tasks in Outlook with my iPhone. I have tried Toodledo (not good) and Todo. Todo works, but it cuts off most of the text. I only get the beginning of my (long) lists. Any ideas how I can solve this problem? I starting to regret that I switched to iPhone...

Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
Memory can be tested with memory diagnostics programs like Memtest+
Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
If the motherboard has no response then do the basics first:
Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory.

How do you "power search"on the new itunes?

How does one power search on the new itunes? Is it still possible?

In addition, since that search window is part of the iTunes' Main Page, I have to wait for that page to load before I can do my search. Before, I could click on the Power Search link, and it would abandon the load and bring me to the Power Search page. Now, since the Main Page takes so long to load, I have to wait for that to finish before I can search.
In other words, I have to wait for iTunes to show me what it wants me to buy, before I can tell it what I want to buy.
Kinda like going into a record store and getting a saleman who tries to sell me the latest hits before he will listen to what it is I came in to buy. The attitude is completely wrong.

Podcast no longer listed in iTunes Store

We've submitted successfully our podcast to iTunes Store on May 2011:
Dear Podcast Owner,
Your podcast, located at http://www.bachcollegiumparis.org/podcast.xml, has been approved. You should expect to see it on the iTunes Store within the next few hours. When it's available, you will be able to access it with the URL below.
http://itunes.apple.com/fr/podcast/bach-collegium-paris/id437007221
Your podcast will be findable through a search within the iTunes Store in approximately one to two days.
Sincerely,
The iTunes Store Team
Our podcast counts 3 episodes, which feature our concert recordings of J.-S. Bach's music (there is no infringement of any copyright whatsoever nor any offensive material published).
Since then, without receiving any notice or email from Apple, our podcast is not longer listed in the podcast directory or iTunes Store. When we look for it we get those messages:
The item you've requested is not currently available in the U.S. Store, but it is available in the French Store. Click Change Store to view this item.
L'article que vous recherchez n'est pas disponible dans le Store français. [The item you're looking for is not available in the French Store]
Thank you in adavance for the help you may provide us,
Bach Collegium Paris
www.bachcollegiumparis.org

2013/2/26 iTunes Podcasts <podcasts (-at-) apple.com> wrote:
Hello,
Please refer to Feed Validator to correct any issues with your podcast:
http://feedvalidator.org/check.cgi?url=https%3A%2F%2F869789182725854870-a-bachco llegiumparis-org-s-sites.googlegroups.com%2Fa%2Fbachcollegiumparis.org%2Fwww%2Fp odcast.xml%3Fattachauth%3DANoY7cpkCqVdLtxBxE2dyWY37ISyoPLM24kjKOVVYr3lFjoulV0yII Tdns4U6y-GsluBYhFeHM0_9HiARS5rJkS0llJhDkiqdtk6zW_d04pIthhQmmwzeA5lbqa3nX
You can also visit our Tech Spec for additional assistance with setting up your feed.
http://www.apple.com/itunes/podcasts/specs.html
Regards,
Elisa-Maria
Bach Collegium Paris wrote:
Thank you Elisa-Maria for your answer.
Feed validator has certified our podcast was a valid RSS feed:
http://feedvalidator.org/check.cgi?url=http%3A//www.bachcollegiumparis.org/podca st.xml
Do you think Apple iTunes Store will reinstate our podcast in their directory any time soon ?
Bach Collegium Paris
www.bachcollegiumparis.org
Elisa-Maria wrote:
Hello,
Your podcast has been activated and updated with the requested feed.
Please allow 1-2 days before you see your podcast live in the Store.
Thank you,
Elisa-Maria

No longer listed in browser or power search

Similar Messages

Maybe you are looking for