No longer outputs video down FW, when using FW external HD?

In a recent upgrade (I think it was actually when I went to OSX 10.4.6 - although it might have been QT 7.1.1 or even FCS 5.1.1) I have noticed that:
- when using an external FW800 HD drive for captured footage, and trying to play out DV to my ADVC-100 (on a FW400 bus)
- my dual G4 no longer plays DV out of FW for more than a few seconds. The FW video output just stops.
The fact that it plays for a few seconds obviously shows it is all connected up and working OK.
If I take the HD out of the external FW case and put it inside the G4 (on an IDE bus) - all is fine - DV plays out of FW indefinitely. It also used to work previously (before a software upgrade) - playing DV down FW400 while using external FW800 drives for captured footage.
Familiar to anybody else? Any solutions?
I am (I believe) all up to date with updates, including ProAppSupport.

Answering my own question here:
Solution was to use an additional FW PCI card (Sonnet Allegro) to give me a second FW bus in my Dual G4 1.42GHz FW800.
I (wrongly) assumed that with a G4 FW800, with two FW400 ports and one FW800 port, that the FW800 and FW400 busses were separate. Not so, as someone pointed out, saying there are NO Macs with more than one FW bus built in.
So, external HD on internal FW800 bus, and ADVC-100 on PCI FW400 card - and all is OK now.
Can I give myself "solved" points?

Similar Messages

Hi plz help me here .. I update my macbook air running with Mac 10.8.5 to yosemite and it will take too long to shut down and when stars it will like its gonig update?

Hi plz help me here .. I update my macbook air running with Mac 10.8.5 to yosemite and it will take too long to shut down and when stars it will like its gonig update?

More information would be helpful.

Just got my ipad air tried to play a video in nbc it says my video is disabled when using 3g/4g go to settings to turn on where do I go to do this

ipad air not playing video in nbc app it says video is disabled when using 3g/4g how do i turn it on in settings

The app is saying that a cellular 3G or 4G connection is not good enough for video. Connect your iPad to a WiFi connection rather than cellular to use video in this app.

My mac wont send emails from yahoo or any other websites when using an external USB modem!

My mac wont send emails from yahoo or any other websites when using an external USB modem! I have checked the settings and they seem correct. Can anyone help? I do not have snow leopard. I can log on my email accounts, open my incoming emails (with difficulty coz it asks me to "try again" ) but I can never send emails, I always get: "sending is taking a little long, try again".
What is the problem? this is a hair puller !!!

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)

When using an external (ergonomic mouse) is there any way to get the wheel to scroll one full page at a time?

When using an external (ergonomic mouse) is there any way to get the wheel to scroll one full page at a time? Much appreciated.

I can't use the keyboard to scroll. I need to keep my hand on the mouse, otherwise I'd never get anything done. Since I have no problem getting Firefox to scroll one page at a time, and I'm constantly jumping between 3 browsers, it would be nice to be able to scroll a full page at a time in Safari, just like I can in Firefox. Thanks.

HT4623 Ipad not playing any videos on Internet when using wifi

Ipad 4 not playing any videos when using wifi

Try this:
1. Close all inactive apps. Double-click the Home button and hold apps in the Task Bar down until they all wiggle then tap the minus sign to close apps. Tap the home button to return to Home screen.
2. Hold the Sleep/Wake and Home button down until you see the Apple Logo.

On my new computer, I can no longer open attachmnets in Hotmail when using Firefox. The attachments will open with other browsers. It is quite frustrating. Any help out there would be surely appreciated. Cheers

Hotmail won't open attachments when using Firefox. I'm not sure if this relates to cookies, add ons (I recently addded Ad-blocker and Do not track), or some other type of security setting. I have tried some proposed solutions on the we to no avail. Using Windows 7

Tyler,
Thanks for your suggestion. My problem occurs when trying to open any type of file (at least .doc and .pdf, as far as I know). As I mentioned, when I log into hotmail from another browser, I am then able to open my attachments. I am hoping to figure out how to tinker with firefox so I no longer have this issue. I am not sure what is causing this block, but I know it has to do with Firefox (or settings relating to) or related add ons.

Drill down problem when using union all combination

Hi All,
I have a simple report with a drill down. The report has three columns Region, Sales, Flag... which will drill down to detail level of sales. The Flag column has Y, N values and we added 'All' Value in flag so that the user can select Y, N and All from the table prompt in the report . We have used union all in the report using combination to add the ' All ' Value in the flag. The problem is that now the main report is not passing the Flag values to the detail report. Flag is prompted in the filter in detail report.
If I remove the 'All' value from Analysis with only Y N selection criteria the drill down works.
Is there any work around? I have to use table prompt and All value selection in flag for drill down.
Thanks,
Virat

The problem is without union all when doing combination of analysis drill down works, when I use combination drill down does not work because it does not pass the parameters for flag . I have used union all to add All value in flag.

Video quality deteriorates when using title tool or color.

hi there, I'm currently editing a HD project in FCE 4,0,1. All goes well, except when I use the title tool (lower thirds) or when I use color to adjust a certain shot. When using color, the movements begin to jitter. When using the title tool, the video in the background + the title itself becomes pixelated, meaning that the quality drops far below the original HD quality. The bad quality remains when exporting the movie. When I move the title just a tiny bit, the quality goes back to regular HD, but when I render it, it goes back to inferior video. Any ideas, suggestions, insights, ... ? Thank you

Hi(Bonjour)!
Welcome to the forum.
Did you render the timeline?
What are the original clip format/codec ?
See those links about titling in video/DV:
http://www.kenstone.net/fcphomepage/perfect_titlesphil.html
http://www.kenstone.net/fcphomepage/motion_text_in_fcpspencer.html
http://www.kenstone.net/fcphomepage/basic_photoshopfiles.html
http://www.kenstone.net/fcphomepage/basic_ps_stills_tofcp.html
http://www.kenstone.net/fcphomepage/basicps.html
http://www.kenstone.net/fcphomepage/livetypefundamentals.html
http://www.kenstone.net/fcphomepage/basic_textgenerators.html
http://www.kenstone.net/fcphomepage/basic_credit_rollstc.html
Michel Boissonneault

Error -50 when using an external editor

Having finally graduated from iPhoto 2, I found some "interesting" behavior in iPhoto '08...
iPhoto objected when I tried to save an externally edited photo back into its slot in iPhoto -- nothing lost, just an error dialog and the edits were not applied. Since it was repeatable, it made me curious.
When you choose external editor to edit a photo in iPhoto 8, the first thing iPhoto does is stash a copy of the original (and activates the "Revert to Original" menu item for that photo). Just editing in iPhoto 8 doesn't do any of this until you accept the changes -- that's an important distinction, because if you change your mind with the external editor (and make no edits, or cancel them without saving), that stashed copy stays in the "modified" folder.
For all practical purposes, it's "forgotten" unless you happen to choose "Revert to Original", in which case, the extra photo is unceremoniously purged. Now, if you don't think about purging that forgotten copy and later decide that you actually do want to edit that photo in an external editor after all, iPhoto will again stash a copy while your external editor is opening. It gets stashed in the same folder that already has the previously stashed (and forgotten) image file. If the file were overwritten, there would be no big problem, but it does not get overwritten, and you can't have two files with the same name in the same folder. So the finder appends a "_1" to the end of the file name -- and THAT sets up the problem. When you finish editing and save the file back to iPhoto, you will be (unintentionally) trying to add a file to your collection that iPhoto doesn't know about. The filename change to avoid a conflict in the folder is not reflected in the iPhoto 8 database.
Older iPhoto versions would have let that pass (and that's why there were always problems with database corruption), but the newer version catches the attempt and simply doesn't allow the save to take place.
That's the "why it happens", but it's only my second day with iPhoto '08 and I'll need a little more time to work out how to selectively fix the problem without damaging the database -- a database rebuild does not purge those stashed photos (and you wouldn't want it to because most of them are the originals for photos that were actually modified).

Brie Fly:
I tried to replicate that using Photoshop and could not. When starting an edit with PS a file is created and remains is I abort the edit in PS. However, if I edit again with PS and save the original modified file is changed with no other file being created.
What 3rd party editor are you using? The only time I get a _1 file is when I move a file to an event that has the same file name as a file already in that event.
What system are you running and are you at iPhoto 7.1.1, iLife Support 8.1.1 and Quicktime 7.3?
Happy Holidays
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

When using as External Hard Drive: can I install programs?

Is it possible to install a program to the iPod when it's being used an external hard drive? I just thought of this, because I was wondering if it would help me conserve disk space. So long as I kept it connected to the computer, would the program still work?

Possibly, but will reduce space usable for media playable by iPod. If it will be for use as external hard drive exclusively there shouldn't be an issue. You could get higher capacity discs in external enclosures for about the same size though.

When using an external projector, the only thing that shows up on the screen is my desktop screen

When I'm presenting using an external projector, the only thing that shows up on the view screen is my desktop screen. It will also display a powerpoint file, but only in slide show mode. No other files (word, excel, etc) or safari will display. How can I get what I see on my computer screen to show up on the external screen?

Check out this support site about using two monitors, since that's what you're doing when you're projecting:
http://support.apple.com/en-us/HT202351
You can either set it to "mirror" or arrange the monitors side by side. Then when you want to show the working window on your projector slide it in the direction you set as the second monitor. Many teachers will do this to show a video or powerpoint to their class while working on another document or answering emails.

Kernel task when using Firewire external usb drive

Hi, I'm using an external 320GB Iomega USB drive that has both usb and firewire cable sockets. When i connect the drive with the firewire cable to my mac (MacBook Pro) the CPU usage increases. Specifically, kernel_task usage goes up and stays constant in around 3% and sometimes it goes higher and stays high for longer periods.
Does anyone knows why this occurs and how to avoid a kernel_task CPU usage increase?
Greetings,
C.

It's probably Spotlight Indexing the external drive, if you don't want this to happen open System Preferences/Spotlight, click the Privacy Tab then drag the external drive icon from your Desktop into that box.

Audio cutting out when using D2 external Firewire Drive

Hi,
I have just upgraded to Logic Studio, using the following setup:
Macbook Pro
Motu 828
AMT 8
Logic Studio
D2 Lacie 500GB Firewire Drive
As the MacBook's internal hard drive is not sufficient to record and playpack efficiently, I was advised to get an external Firewire Drive. Given that I have very little space on my laptop - (am running windows on a partition also) I am trying to save my logic files to the external HD. When creating tracks specifically using Audio Instruments, the playpack keeps cutting out.
I am connecting the HD via usb 2. I am also having to freeze the tracks in order to record more layers. There is lots of clipping and latency. I thought by using the external, this problem would be resolved.
The HD is not playing back the tracks fast enough, and keeps cutting the audio out. The audio cuts out everytime the blue light on the drive flashes.
I cannot save the files to the MackBook HD as there is notenough space.
Is there something very wrong with my setup?
any advice would be really appreciated.
ps. I am a bit of a newbie
thank you in advance.
Spy

Connect it via firewire 800. USB2 is not good for audio or video streaming.
I have 3 D2's connected to my mac pro, works like a charm.
good luck.

MBA drops wifi when using an external monitor

My MBA 1.6 GHz has an issue when using only an external monitor. That is when re-awoken after a sleep, with the portable's monitor closed and using both an Apple external keyboard and mouse, my wifi connection to my time capsule drops. It does this consistently and I suspect a hardware issue as the same thing happened under leopard.
Is anyone experiencing this issue? Does anyone know of a test I could preform to establish what is failing? Does this require a hardware repair? Any help with this would be appreciated!

I am having an identical problem with my Mac Air.
It seems we aren't alone either: http://discussions.apple.com/thread.jspa?threadID=1401466&tstart=60. Seems to be some sort of interference issue.

No longer outputs video down FW, when using FW external HD?

Similar Messages

Maybe you are looking for