No longer prints since Igot iPhone

I have been using iCal for awhile without incident. But since I got an iPhone (and synched it), I can no longer print any calendars.
I get no error message. Just 1 or 2 lines of printout. Enough to discern the calendar key and the beginning of the calendar border. Then the page is ejected and the job terminates.
All other apps print without incident. The printer is an HP PSC 2175.
Has anyone seen this before?

OK, realised what I had done, for some reason it had selected the HP 2510 Laser printer so I deleted that profile and put it again as the correct inkjet option and Voila!
That's a relief as I had only just recently bought that printer.

Similar Messages

  • Can no longer print since upgrading modem.

    can no longer print since upgrading modem.  none of our apple devices see the HP printer anymore.  they used to.  says no airprint printers found.  any thoughts on how to fix?

    If you upgraded the modem......but you have not reset the printer back to its original default settings and then set it up again......now would be a good time to do this.
    The printer still has the programmed settings to connect to your old modem, and it cannot find it, because it is no longer there. The printer is lost, and does not know how to find its way. It needs to be set up again with new settings to match your new modem.

  • I can print from my iMac wirelessly but here lately I can no longer print from my iPhones nor iPads on the same printer

    Just recently I was able to print from all of my devices now the only one that prints wirelessly is the iMac the iphones & ipads say no air printer is found how can that be if the iMac is air printing?

    Hello, Carternite. 
    Thank you for visiting Apple Support Communities. 
    Here are some troubleshooting steps that I would recommend going through when experiencing this issue. 
    For best results
    Verify that your iOS device is using the latest version of iOS available and that the app you're printing from isup to date.
    Make sure that your AirPrint printer has the latest firmware version installed. Check your printer's documentation or contact the printer vendor for more information. A firmware update may be available, even if you just bought your printer.
    AirPrint printers connected to Wi-Fi networks work with iOS. AirPrint printers connected to Wi-Fi or Ethernet networks work with OS X.
    Wi-Fi capable AirPrint printers must be connected to the same home Wi-Fi network as your iOS device or Mac.
    If you are unable to print
    Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found":
    Make sure your printer has paper, and enough ink or toner installed.
    Make sure your printer is connected to the same Wi-Fi network as your iOS device.
    Make sure your printer has power and is turned on. Try turning your printer off and then back on again to see if it resolves your issue.
    Check to see if your printer has any error lights or indicators displayed on the printer's control panel. Check the documentation that came with your printer to clear any errors displayed.
    Check with your printer's manufacturer to see if any firmware updates are available for your printer.
    Notes:
    AirPrint printers connected to the USB port of an Apple AirPort Base Station or AirPort Time Capsule are not supported with AirPrint.
    Some Wi-Fi AirPrint printers can take several minutes to join a Wi-Fi network after being turned on. Make sure that your AirPrint printer is connected to your Wi-Fi network before attempting to print.
    Important: Printers not listed in this article are not supported by AirPrint. To search for an AirPrint printer model, use the Find feature of your web browser (usually Command-F) to search the list below.
    About AirPrint
    http://support.apple.com/kb/ht4356
    Cheers,
    Jason H. 

  • Kodak 5210 is no longer printing since my upgrade to Yosemite.

    It will now only print colours but no wording for some reason.  Test prints etc are all fine.

    It will now only print colours but no wording for some reason.
    Could you provide more information please? Is it printing at all?
    If you haven't done so already, try resetting the printing system.
    OS X Mavericks: Reset the printing system  also Yosemite
    Kodak printers - Yosemite

  • Officejet 6500 709n no longer prints since yosemite

    Printer connected to wifi successfully. Doesn't show up fom macbook air when attempting to add printer

    Hello and welcome to the forums @espressodaily
    Although there are no Full Feature Drivers available for your Officejet 6500 Wireless E709n model on Yosemite, you can still install the printer through an Apple Update.
    Please check out this guide for the instructions:
    Installing Your HP Printer Driver and Software for Mac OS X
    Have a great day
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Shortcuts no longer work since updating iphone

    Updated to the latest software, now I'm unable to use my shortcuts anywhere. Any ideas or solutions?

    This is what I did step by step and it worked like a charm... I had an iPhone 4 when I did this a few days ago. I have documents and data ON in iCloud...
    1. write down or take screenshots of all existing shortcuts
    2. delete all shortcuts
    3. backup to iCloud (I think this clears all shortcuts you have stored in iCloud)
    4. go back to settings-->general-->keyboard... You may notice one or a few generic shortcuts pop up on their own. The one that popped up for me was OMW (on my way)
    5. re enter all of your shortcuts and phrases
    6. when done, back up again to iCloud (stores your new shortcuts)
    I restarted my phone. Shortcuts still worked. I just got a 4S and restored from the iCloud backup mentioned in step 6 and my shortcuts worked on my new phone.
    Good Luck. I hope this helps everyone.

  • Since upgrading to 8.0 I can no longer print from Mapquest Classic. I an from IE. How can I fix that? ALSO I don't like the new layout. How can I go back to my pervious version?

    Since upgrading to 8.0 I can no longer print from Mapquest Classic. It's not a Mapquest problem it's a Firefox problem as I am able to print using IE. I haven't encountered any other sites problems yet but I'm sure it's to come if I don't get this fixed. I need to be able to print. How can I fix this?
    I also do not like the new layout. How can I go back to my previous version?

    What precisely do you mean by deleting the podcast app from both the phone and Mac? I have deleted the podcast app from my phone but on my Mac in iTunes->iPhone->Apps it shows up albeit with a button labelled "Install". I've resynced 3 times and when I try to access my Podcast playlist in the Music app, I still get a message telling me that podcasts have moved to the Podcast app. I'm really sick of some of the changes Apple  has made to their software.

  • Epson NX305 no longer prints via Airport since upgrade to 10.5

    I recently upgraded my laptop from 10.4.11 to 10.5.8. Since the upgrade I can no longer print wirelessly using the laptop. The printer is an Epson NX305 all in one. I have uninstalled and reinstalled the driver multiple times. Epson says it's an Apple thing, not a printer thing.
    The Airport Express is running software 6.3, which I believe is the most up to date available. This is PPC laptop, not an Intel based one.
    When I go to print an document the computer sees the printer on the network. I click print and the document flashes on the printer screen for a splt second and then just disappears. If I connect the printer to the computer directly via USB it prints fine.
    Any thoughts?
    Thanks!

    Been having the same issues happening on the same machine as you. I did this yesterday, and so far so good.
    1. Restart in safe mode (Hold down shift key when you hear the chime)
    2. Under Applications > Utilities > Disk Utilities, select your hard drive on the left column, and click "Repair Permissions"
    3. Once done, restart
    It's been a day since I've done this, and no beachballs yet (fingers crossed)

  • Need to sinc my iphone 4 never done it before and when I plug it in to the laptop it tries to sinc to my dad's old long gone iphone?

    I need to sinc my iphone 4 that I bought in the summer of 2011. I've never done it before and when I plug it in to the laptop it tries to sinc to my dad's old long gone iphone?
    This laptop was used by him when he had a iphone a year or so ago but he has since changed to an android phone.
    This is the only laptop we have and he has no use for the itunes or anything iphone related now so how do I get Itunes to forget his phone and let me connect mine so that everything on my iphone can backed up and so I may proceed with all the updates out there to bring it current....while still losing none of my stuff.
    it was only plugged in for a second and now my ipone setting about page says "Danny's phone" which is what his used to be called but all my stuff is still here...???

    Hey joshuafromisr,
    If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/HT1925
    or here:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    Best,
    David

  • Since updating to Firefox 3.6.15, I can no longer print coupons from SmartSource. The error message is that Java is not detected. The check box is longer showing in the Options/Content of this version of Firefox, so I can not enable it.

    # Question
    Since updating to Firefox 3.6.15, I can no longer print coupons from SmartSource. The error message is that Java is not detected. The check box is longer showing in the Options/Content of this version of Firefox, so I can not enable it.

    Same PC as I used to post the question. When I go to the "plug in check" page, it shows I am up to date and it is not disabled.
    Java(TM) Platform SE 6 U24
    Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers 1.6.0.24

  • TS1538 Since my iPhone 4 update I can no longer up date it through my computer I am running windows 7 and before the iPhone update I didn't have any problems now I get the error message iTunes could not connect to this iPhone. An unknown error occurred (0

    Since my iPhone 4 updated I can no longer sync it or charge it with iTunes I get an error message ------>iTunes could not connect to this iPhone. An unknown error occurred (0xE000084)

    From this support document http://support.apple.com/kb/TS3694 see this:
    Unknown Error containing "0xE" when restoring
    To resolve this issue, follow these steps. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. Learn about issues syncing iOS devices with P55 and related Intel Chipsets.

  • Since upgrading to Yosemite, I can no longer print to my Kodak AiO.  The fix on Kodak site does not work.

    Since upgrading my Macbook to Yosemite 10, I can no longer print to my Kodak AiO 5250.  The fix on Kodak site with Terminal does not prompt to password like it says it will.  Macbook has all available upgrades completed.  Printer works with a PC. 

    This is where I found the Kodak fix:  http://support.en.kodak.com/app/answers/detail/a_id/49247/selected/true
    I'm not really comfortable in 'Terminal' but tried it.  Nothing happened after pasting in the first command.  The fix says it will ask for password. 
    I see now this seems to be a pretty common problem, I would have thought Apple would fix it with an update for the number of complaints I've found.  Since Kodak is in receivership or bankruptcy, I would think it's unlikely they will have any more solutions.  I feel like Yosemite stole my printer. 

  • HT1338 I can no longer AirPrint to my Dell AIO Printer since I upgraded to Mavericks. Any suggestions?

    I can no longer AirPrint to my Dell AIO Printer since I upgraded to Mavericks. Any suggestions??

    Okay. That is a good result. It proves you have a working network connection between the Mac and the Dell.
    So with the printer not showing using Bonjour, you could try adding the printer manually. With Printers & Scanners open, click the plus button to add and then select the IP icon. You can then enter the IP address of the Dell. Set the protocol to HP Jetdirect-Socket. Leave the queue name blank. Change the Name from the IP address to Dell Wireless. Leave the Location blank and in the Use menu, select the model of Dell you have. Then click Add to complete the queue creation and then see if you can print.

  • Since HP Update. I can no longer print in black only and draft. Toolbox reports no problems found.

    Since HP Update. I can no longer print in black only and draft. Toolbox reports no problems found.

    This is a duplicate topic with your other post.  I will lock this one, please look here for responses.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • My Photosmart printer no longer prints with my iPad or iphone.

    My Photosmart printer no longer prints with my iPad or iphone. I have reinstalled both Apps but although they recognise the printer , no printing ensues. The printer is still printing wirelssly with my PC.
    Thanks any helpers out there

    ...not sure which of the three possible apps you have, but here is the go-to place to troubleshoot any issues with them     http://www8.hp.com/ca/en/support-topics/mobile-printing/mobile-print-help-iphone-ipad.html
    *** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
    If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

Maybe you are looking for

  • IBooks app - no longer available

    I have tried numerous times to download the "iBook app" from the App Store for my iPad but I continuously receive the message that is no longer available. Is this for real, or is it just a temporary App Store glitch? If no longer available,what is th

  • Parallel Execution  against Normal Execution

    Hi, Can someone explain why in this case Serial Execution is faster although enabling parallel dml at session level , What are the possibilities to improve speed of executoin for parallel execution as i need to populate for 139 stores data having aro

  • BAPI and BADI inofrmation for beginners

    Howdy, Thanks for all yer help so far y'all!!! Listen does anyone of you know good resources for learning about BADIs and BAPIs if your a complete beginner or perhaps not such a beginner heh, heh That would be really useful!!!!! Thanks y'all

  • Cannot print e-mails or attachments

    Having issue printing e-mails and attachments. It is not a printer problem as I ran HP printer diagnostics and it says everything is working fine. Everytime I try to print an attachment I am taken to a blank page. Any ideas? HP Printer Forum says it

  • Simulating inputs on PCI-6527

    Hello! I have a question regarding PCI-6527 board simulatuion. Is it possible to simulate inputs of the device, when the application is written with Visual C++? How? I have installed the latest DAQmx driver (8.2 I believe) and I have created simulate