No longer using Linksys router. Should I uninstall Cisco LEAP, PEAP, and EAP?

Should I uninstall the Cisco LEAP, PEAP, and EAP programs if I am no longer using a Linksys router?  I am replacing with an Asus router.
thanks,
KG

Hi! It's best to uninstall them all if you are not going to use them for the sake of freeing some memory on your computer. Should you change your mind and get a new Linksys router one of these days, I am sure it will come with its own installation software anyway.

Similar Messages

  • How to use Linksys router as bridge?

    I am trying to extend the wifi signal by using another router as bridge
    Source router is Netgear N150 b/g/n and here are the settings
    IP 192.168.254.1
    Subnet mask 255.255.255.0
    Default Gateway 192.160.254.254
    Channel number is on auto
    I have a Ubuquiti antenna
    Here is the webpage for the antenna
    http://www.amazon.com/gp/product/B004EGI3CI/ref=oh_aui_...
    I connected Linksys E900 router to this antenna and then another cable is connecting the router to my laptop
    To access antenna settings I typed 192.168.1.20 and accessed the antenna settings I chosed bridge option
    Then accessed internet explorer typed in 192.168.1.1 for linksys router settings
    Here is the linksys settings
    IP 192.168.1.43
    Subnet mask 255.255.255.0
    Default Gateway 192.168.1.1
    Channel number is on auto
    I choosed the channel number different than the one from the original signal and chose bridge as option
    While it was connected I tried to surf the net but it did not work
    I unplugged it form the router and checked the wifi signals and saw my wifi signal very strong 
    But tried to connect but it says can not connect
    Can someone help me?.
    Is default gateway supposed to be the same in main router and the bridge router and the antenna?

    You need to verify with the e900 that it actually has the Bridge mode feature, it it does not, the only other thing you can do is to run it in wired AP mode:
    http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=169333b784cf4c78b8db5490f85c518a_Setting_.xml&pid=...
    http://www.northshore-it.com/tips/how-tos/cascade_linksys/#LAN_to_LAN
    If you you an actual bridge mode feature, and the e900 will not work, I suggested reviewing this as an alternative:
    http://store.linksys.com/products/linksys-entertainment_bridges_stcVVcatId554254VVviewcat.htm

  • Using linksys router

    OK have just got first mac after many years with PC. Have PC lan going through Linksys router.
    Have got latest firmware. updates to latest osx
    using the ethernet cable life is fine
    on wireless(and I have tried this with 3 routers) its sad. even hitting the router is slow(very slow) to bring up a page , yet the ping time seems reasonable.
    I will probably just find an ethernet wireless bridge , but any ideas. I don't think this is specific to a router. using WPA security , DHCP.
    thanks

    ok i sorted this out
    got a buffalo access point
    used the buffalo to connect over wireless to linksys
    ethernet into buffalo
    still cant get airport on mac to talk direct to linksys

  • My HCL Laptop Hang When i use LINKSYS ROUTER WRT300N

    LINKSYS,
    I think you help me to solve my problem, i am using HCL Notebook P7910, And LINKSYS ROUTER WRT300N (V.1, Latest Firmware).
    Problem is when i use through LAN cable then working Fine but when i use THROUGH WI-FI then my laptop HANG.
    I also Contact with both coustomer cares, but problem not solved.
    what can i do both products are in warranty , warranty expire in next 1 month.

    Try these settings:
    Radio Band – 40
    Wide Channel – 6
    Standard Channel – 11

  • I downloaded an update yesterday and it did not install correctly..gives me error... now I cant even open itunes...should I uninstall I tunes totally and do a brand new install?

    I downloaded a new version of I tunes yesterday and it did not install correctly- I cannot open I tunes, I have tried to download again, install again, repair and nothing... should I uninstall ITunes completely and reinstall fresh? what happens to my music collection, images, etc?

    Hi bezoya,
    Thanks for using Apple Support Communities.  If iTunes is not launching after an update, I would recommend trying a thorough reinstall as described here:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Cheers,
    - Ari

  • HT4641 I will no longer use pages because I can open any rtf's and that is the majority of my files.  Any ideas?

    I will no longer use Pages because I can't open any rtf's and that is the majority of my files.  For years I have saved all files as rtf to allow me to open them on windows and with any word process program. Now the new version of Pages will not open them. Any ideas?

    You can let Apple know you want this feature back via
    http://www.apple.com/feedback
    and find another word processor.
    Are you talking about a Mac or an iPad/iPhone?

  • Lost connection to other computers using 'LinkSys' router

    DSL modem is connected to my Linksys wireless router. I have two other computers connected using an Ethernet cable (coming from the router). Yesterday my internet (SBC-Yahoo DSL) was down for the entire day. In the past both computers connected to the router would work just fine. In fact the laptop would work either connected via the Ethernet cable or with a wireless connection. Today neither of the computers connected to the router will connect. I have not changed any of the settings on either computer. Have reset the DSL modem (turned off and back on) and have reset the router (reset button). Any suggestions on this problem?

    Can you connect to the router?
    Open a browser and go to 192.168.1.1
    Verify the configuration options.
    Also make note of the firmware version.
    Then, for the moment, bypass the router and direct connect to the modem. Can you connect to internet then?
    If so, check the Linksys web site to see if there is a firmware update for your router.
    On my (wired) Linksys, after one of the OS updates (I forget which one) I could no longer get to internet until I updated the firmware on the router.
    Since there has been an OS security update in the last week, and if you downloaded/installed it, then your problem began, its possible that is the problem.

  • Using Linksys router with Time Capsule / Airtunes...

    Hi,
    Does anyone have any idea how I can use my old Linksys WRT54G wireless router with my Time Capsule in such a way that the WRT54G provides a b/g network and I can have my Time Capsule provide just 802.11n for the best possible speed?
    I have the two connected via Ethernet (TC connected directly to my cable modem) but don't seem to be able to get things to work.
    I know I must be on the edge of getting this to work but am obviously missing the final step...
    Cheers in advance for any help you can give,
    Adi :o)

    go to this link:
    http://discussions.apple.com/thread.jspa?messageID=6831703#6831703
    than the link at the bottom of the page.
    i just set this up this weekend - everything works perfectly.

  • Mac osX question regarding persistent LAN problem using Linksys router

     We are eight months into this problem.
    I had this up on the apple help board 6 months ago but could only get a band aid fix for the problem.
    (The "band aid" is explained on the link below.) 
    We have since exhausted 3 other professional help folks.
    We are using the WRT54GS ver. 5.
    Before we were using BEFSx41 ver. 2 and we had same problem.
    The full description of the problem can be found on this page...
    http://discussions.apple.com/thread.jspa?messageID=9062933#9062933 
    ANY well thought out suggestions deeply appreciated.
    Thanks. 

    Sorry dude, definitely sounds like a mac problem (i.e. editing the cnf files on mac s). Unless you are blocking a special service, which you probably aren't, then its definitely not the router. The reason I say that is all traffic gets transferred at layer 2 of the OSI model, in this case. IP addressing is layer 3 (router/network layer). Short answer is all traffic gets "switched" via mac address, not ip in this case. Your router here is more like a switch that provides dhcp and a default gateway to get to the internet. Any unknown mac (media access control, not mac/apple) traffic will get "routed" to the wan.
    Message Edited by bubbateeth on 02-27-2009 01:46 AM

  • I am wanting to know if my blackberry curve that I no longer use could be put on a phone card plan and if the number that she has on another phone can be transfered to the curve?

    I am giving my old phone the curve to a friend who wants to know if the phone can be phone card used?

        Good afternoon shrimpski. What a wonderful friend you are to be giving your friend your old Blackberry Curve. I need to find some friends like you to get me out of sticky situations. Are you wondering if they can use it on a prepaid account? Depending on the make and model of the Blackberry, they may be able to activate it on a Verizon Wireless prepaid account. For more information on our prepaid options please reach out to our prepaid team at 888-294-6804.
    Verizon Wireless phones can only be activated on Verizon Wireless accounts. If they are looking to use the device with a different carrier, they would want to bring it to the carrier to see if it is a device that they can activate on their network.
    NickB_VZW
    Follow us on Twitter @VZWSupport.

  • Should I uninstall the Beta version and then install the Android version or . . . .?

    I installed Firefox Beta on my VTE Android. I think I also installed and uninstalled the android version. It is all a big blur. I am having so much trouble and I am so confused.

    Hi!
    Could you please elaborate on the issue you are having to better assist you?
    Thanks!

  • Different wireless clients, should go for LEAP, PEAP or EAP-TLS?

    Hi ,
    I have a mixture of wireless clients in this customer environment such as PDA, Cisco clients and third party PCMCIA cards.
    Customer requires me to propose an EAP authentication method to authenticate them. WHat suits them?
    I plan to have authentication done on application level. Could you recommend any?
    Thanks.
    Delon

    Delon
    It will more be a matter of what all the clients support, you normally set it up for the least supported client or have different VLANs with different security levels based on what you clients support
    LEAP is only on Cisco or CCX certified cards
    If you base OS is Windows XP and the client cards they have support EAP then EAP-TLS is a pretty good choice if they will support PEAP then that is even better again.
    So to make this choice you really need to know exactly what client cards you have and what they support The AP will support all of them so the choice is based on the clients

  • Should i uninstall ie9 afewtr using firfox for two years?

    I have been using Firefox as my browser for at least a couple years. I no long ever use IE9. Should I uninstall it? If I do, are there other programs on my PC that will be affected? If I should dump it, what is the best way to do it? Win 7 64-bit is my OS.

    It is usually best to keep IE installed in case you need to for (MS) websites that require ActiveX controls to access them.<br />
    You should be able to disable IE shortcuts that Windows may be displaying automatically via setting in the control panel or start menu settings.

  • Cannot conect router WRT54gc linksys router using windows 7

    when I connect router correctly via modem I get message not connected no matter what I do I am convinced I am doing nothing wrong having used linksys router a number of times before about 2 years ago using XP cannot someone help before I climb the wall to throw myself off please I am now connected to router now to get on internet to this site help please wanted

    Let me know the name of the ISP- means it’s a cable connection or a DSL connection? Do you get the internet connection when you connect the modem directly to the computer? If yes, what IP address do you get on the computer? To check the IP address that you are getting from the Router...
    You can check the IP address in the following manner:
    # Click on Start -> All Programs -> Accessories -> Command Prompt.
    # A black pop up box should come up, type: "ipconfig /all" …
    There check the IP address and Default Gateway under LAN….

  • Airport card and linksys router?

    I just had an Airport Wireless card installed for my parents' ibook g4. I bought a Linksys wireless router for them, b/c we have one (for PC desktop and laptop) and have had good luck with it. I think the two times I've had to contact Linksys via phone or live chat I got quick responses and good service.
    Enter adding the Mac to the equation. When I bought the router for my parents, I mentioned we'd be using it with a Mac and the guy at the store said some people choose Netgear routers over the Linksys b/c they're RTG, but with some older Macs (theirs is an iBook G4 from a few years ago) you have to DL something to get the Mac to see the Linksys network.
    Somehow the Mac doesn't see my wireless network and I can't figure out how to add it. I had a useless hour-long chat session with someone at Linksys--no resolution. Can I actually get a Mac to work with Linksys or should I give up the ship and go get a Netgear router or airport base?
    I plan to set up their wireless network at their beach house, so there will be a Mac and PCs using it and then putting in their home when they return in the fall.
    TIA!

    scatterall, Welcome to the discussion area!
    The iBook G4's AirPort Extreme card will allow you to connect to any standard 802.11b/g network including one created by a Linksys router.
    Compare the antenna wire connection to the AirPort Extreme card with the photos in KB 108039, Properly attaching the antenna on an AirPort Extreme Card.
    Do you have the Linksys configured to broadcast the SSID? If not, enable the SSID broadcast. This is a futile attempt at security since the SSID is still broadcast between the base station and any connected clients.
    If you can't or won't enable SSID broadcast, on the iBook G4 you will need to go to the AirPort menu, select "Other...", and enter the network name and password (if wireless encryption is enabled).

Maybe you are looking for

  • DFF Values Default in Credit Memo from AR Invoice

    Hi, We have entered an AR Invoice with DFF values at the Line Level. We are creating a Credit Memo directly from the Invoice.Almost all the information in the Credit Memo defaults from the Invoice which is being credited. The DFF information is not d

  • F4 or 4or f9 or9 keys not working

    f4 or 4or f9 or9 keys not working any help thank you ray

  • My mouse won't properly work after I added a trackpad

    Hello, I bought an iMac earlier this year. it came with the Bluetooth magic mouse. I used it for a while and decided to give the Bluetooth trackpad a try. The trackpad worked fine from the first minute and is still working fine, but I found that for

  • Can I stop my users resetting their iPad?

    Hi All, Im an IT administrator and Im looking at rolling out 500+ iPads into our corportate environment. Is there a way I can prevent my users from resetting their iPad back to factory settings thru the SETTINGS icon > reset. Ideally I would like to

  • Credit memo application against invoice

    Hi, i have a senario where a CM is credit is created with an line amount of -2000 and tax amount of -320, totally CM amount is -2320. and i have an invoice with line amount of 1000 and tax amount of 160 (total amount 1160) and this particular invoice