No Low Ink Notification / How to check ink levels

I don't know how it disappeared, but I no longer have an HP icon, and never get low ink notifications. I have nothing "HP" in program files, so can't figure out how to check the ink levels. Every time I lose color I have to change both cartridges. Printer prints fine. Any suggestions? Hopefully I don't have to disconnect everything and start installation over - there's always a chance it won't work when I'm done. Technologically inclined Im not. Thanks for any assistance you can give. Printer is PSC1510 All-In-One.
Message Edited by paz88 on 03-21-2009 10:10 AM

If you press the Cancel and the Start Copy Color button on this printer at the same time and release them, it'll print a Self Test Report that'll have an ink level gauge on it. you can check it there.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Similar Messages

How to check ink levels of a 4620 using windows 8.1

How to check ink levels of a 4620 using windows 8.1

Hi krmoss,
Welcome to the HP Support forums. I see that you would like to learn how to check the ink levels on your Officejet 4620 printer.
The steps on how to check the estimated ink levels can be found in your User Guide on page 74 in the section titled “To check the estimated ink levels from the printer control panel”. If you have installed the full feature software and driver for your printer onto your computer you can open up the HP Solution Center and check the from there as well.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

How to check ink level of HP 3500 series deskjet printer's cartridge?

How to check ink level of my new HP deskjet 3510 e-All-in-one printer's ink cartridge?

Hi Kumar12463,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Deskjet 3510 and needing to check ink levels. HP Print and Scan Doctor.
In this document choose this option to check the printer's ink levels and to view the cartridge details such as install dates, warranty dates, and serial numbers under review additional hardware functions.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

How to check patch level in SAP 6.0 ?

how to check patch level in SAP 6.0 ?
is there any T code available for this
thnx in advance

Hello,
In note [1076022|http://service.sap.com/sap/support/notes/1076022] we can see:
b) Minimum support package levels and SAP kernel patch levels
   For non-SAP BW systems the minimum 700 SAP_BASIS support package level is SP14.
   For SAP BW systems, the minimum 700 SAP_BASIS support package level is SP16 and the minimum 700 SAP_BW support package level is SP18.
   Please consult note 1152240 for the minimum DbSl kernel patch level and the minimum JDBC driver requirements.
Regards,
Eduardo

How to check ink levels on hp d110 in Windows 7

How do I check the ink level of my D110 printer in the Windows 7 program?

Hi there,
I understand you are wanting to check the ink levels on your Photosmart D110 printer, but no longer have the Solution Center program to do so. I can definitely help you with that. Please click here and this document will show you how to check the ink levels on the front of the printer and in the Solution Center.
Hopefully this helps, have a great day!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

How to check my level of standard of Java project

Hi,
I have finished a simple project in Java(Mostly swing),
MS-Access,JFreeReport.Then manual testing is also finished.
Now I want to test the coding,GUI desing and all that is simply I want to test the standard of the project.My plan for this is to use some test automation tools.
So Will you plkease which software I have to test my Java Project?
Thank you so much .
Meena.

Hi Kumar12463,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Deskjet 3510 and needing to check ink levels. HP Print and Scan Doctor.
In this document choose this option to check the printer's ink levels and to view the cartridge details such as install dates, warranty dates, and serial numbers under review additional hardware functions.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

How can check rollup level and autoconfigure or not on 11i

Hello;
I installed a vis 11i, wondering how can I check my rollup level and autoconfigure or not, please give advice. -thanks first

portcommand wrote:
Hello;
I installed a vis 11i, wondering how can I check my rollup level and autoconfigure or not, please give advice. -thanks firstUsing AutoConfig to Manage System Configurations with Oracle Applications 11i [ID 165195.1]
Autoconfig FAQ [ID 218089.1] -- 7. Is AutoConfig compatible with Oracle Applications 11.5.x?
How to check, which EBS Techstack Patchsets have been applied on 11i or Release 12.1.x ? [ID 390864.1]
How to Get The Patchset Level of Oracle Applications Products in R12 [ID 550654.1]
Oracle Applications Current Patchset Comparison Utility - patchsets.sh [ID 139684.1]
Thanks,
Hussein

How to check patch level applied or not?

how can i check that bellow patches are applied or not as mentioned for patch no 7427746.
- FA.M mini-pack or later
or
- FIN_PF.E or later
and
-ATG H RUP4() or higher
thanks

Hi;
how can i check that bellow patches are applied or not as mentioned for patch no 7427746.
- FA.M mini-pack or later
or
- FIN_PF.E or later
and
-ATG H RUP4() or higherPlease check :
- How to check which Techstack patchsets have been applied [390864.1 ]
Regard
Helios

How to check firmware level on 5140i and GPS cover...

Hello!
How do I check firmware level on my 5140i and my GPS cover?
Upgrade is not something I can do myself I guess (service shop only) or?
Is it usual to have 2-3 minutes to get a fix point with the GPS?
Is it normal to have just 4 hours of GPS before batery needs to be loaded again? Hten GPs has a limited usuage.
/Patrik

Thanks Glyn -- I opened up the airport utility summary page and it says version 7.3.1 and update is grayed out so looks like I am good to go.
Another question -- when I open the finder to get to the airport utility, the preview shows airport utility application version 5.3.1 but the summary page says 7.3.1.
Why the difference?
Thanks again

How to check ink level in printer cartridge

i just finished installing my C4180 all-in-one printer on my new HP dv6 notebook running windows 7
i cleaned and aligned the ink cartridges, but my black is still printing poorly
i want to check the ink level in the cartridge before i buy a new cartridge, but the windows 7 solution center is somewhat different from xp
the solution center tells me that the ink levels are not currently available and when i click on the printer toolbox, i get nothing
the icon at the bottom of the solution center gives me a big green checkmark, but does not give me any useful information
how can i get better info about my ink levels?
thanks
frank hershenson

Hello frankjh,
Welcome to the HP Support Forums!
Checking the ink levels on the HP Photosmart C4180 can be done a couple ways, from the front panel of the printer or the software installed on the computer.
It is usually not the easiest to see but the ink levels should be displayed in the lower left corner of the C4180 display screen. A small icon looking like a yield sign may be present, if so this is stating it is low.
Since you have tried to use the HP solution Center on the computer in attempt to gather the information and where not able due to an error, you may need to uninstall and install the C4180 on the computer.
Here is the guide to uninstall: Uninstalling the Printer Software. When ready to install download the software from here: HP Photosmart C3100/C4100 All-in-One Printer series Full Feature Software and Driver.
I hope this helps, please reply if you need anymore help
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

How to check battery level?

Is there a way to check the battery level on the iPod Touch? I recently acquired a new 32 GB Touch, and the first thing I did was upgrade to the 2.0 software. I have been unable to find an option or menu that will tell me how much battery life I have remaining.
In looking around I was able to find that on the iPhone there's a Settings > General > Usage menu, but I don't have that on my Touch.
All I ever get is the 20% remaining warning message. Is there no other way to determine how the battery is doing?
Thanks for the help...
-Gary

Hard to believe they don't have something that tells you where you're at. The icon is okay, but is not as helpful as an approximate percentage or number of minutes remaining. I realize battery life remaining can change drastically, say if you start watching a movie, but it would be nice to have something a little more substantial.
I submitted feedback...thanks for the link.
-Gary

How to check Patch level of AR, TCA modules?

Hi,
EBS 11.5.10.2
database 10.2.0.4.0
I am trying to get the Patch level of AR, TCA. Can anyone share with me the process to get from SQL Query?
Thanks

Rathina wrote:
trying to get the Patch level of AR, TCA. Can anyone share with me the process to get from SQL Query?Hi,
You can check the patchset level of all modules by running the adutconf.sql under $AD_TOP/sql/ directory.It wil create/update the adutconf.lst on same location
in that you can able to see the status of each module (is it installed/shared /inactive ) and current patchset version
Alternatively you can try the sql query given in the note 420648.1 :How to Establish if a Product is Installed in e-Business Suite
-Rk
select * from fnd_application_all_view where application_name like '%In%';
select * from fnd_product_installations;
select * from fnd_module_installations;may help you.my senior showed me this way.capture the first short name first from product_installation then try to find the patchset level.
regards
Edited by: new2appsdba on Jul 19, 2010 4:30 AM

Turn Off Low Ink Notifications for HP C4700 Series

Hi, I'm a long time owner of an HP C4795 Print Scan Copy machine who recently installed driver version 14.0. Ever since the driver and support software has been installed, I'm getting a low ink notification every 30 minutes or so. I have low ink, but I really just want to disable the notifications. I'm running Windows 7 Home Premium with Service Pack 1. Please advise. Thank you!

Hi there HPCustomer1562, welcome to the forums!
I saw your post about wanting to turn off the low ink notifications. I have a link I would like for you to see below that may help you. The post is from another user with the same question here in the community.
Re: How to disable ink level notifications
Happy Tuesday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How can I restore desktop icon for hp 1000 printer to check ink cartridge levels, etc.

How can I restore the icon on my desktop for my hp 1000 printer. want to check ink levels, print test page, etc.

What operating system? I recommend not using the software CD as it may be out of date. Get the latest software for your printer from the "Support & Drivers" link at the top of this page.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Hp deskjet 2050 fine on mac desktop but where do i go to scan or check ink levels

i bought mac desktop, grandson got hp deskjet 2050 on the computer can print but where do i look to scan a pic or copy and where do i look for ink levels .

Hi northcarolina,
Welcome to the HP Support Forums! I see you would like to know a little more about the HP Deskjet 2050 that is connected to your new MacBook Pro. Please click on the links below to learn more about your DJ 2050:
Click here to start: Checking Ink Levels
Start copying here: Copy Documents with Text and Graphics
Learn: How to Scan: OS X v10.9
If you have any other questions, I suggest taking a look at your User Guide it has some great information about your printer's features and all options available to you.
I hope this helps!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

No Low Ink Notification / How to check ink levels

Similar Messages

Maybe you are looking for