No luck with LOM

I am having no luck with lights out management. I'm running on the new Xserve line. I configured LOM in the Server Monitor tool. I gave the LOM a static IP based on the ethernet ID it gave. I then opened up server monitor on my Mac Pro and plugged in the IP, user and pass and am just getting waiting for results. The Xserve is plugged in on ethernet port 1 so I set up LOM on port 1. Any ideas?

Hi
Have you looked at these yet?
http://www.apple.com/support/downloads/xservelightsoutmanagementfirmwareupdate11 .html
http://docs.info.apple.com/article.html?artnum=304896
Hope this helps, Tony

Similar Messages

TS1398 Got the dreaded no wifi on my wife's iPhone 4S. Wifi greyed out and no luck with the reset network instructions. Why isn't Apple addressing this issue? We are a family of Apple product users, 2 ipads, an ipad mini, 4 iPhones but one isn't working!

Got the dreaded no wifi on my wife's iPhone 4S. Wifi greyed out and no luck with the reset network instructions. Why isn't Apple addressing this issue? We are a family of Apple product users, 2 ipads, an ipad mini, 4 iPhones but one isn't working! Issue began whenwe upgraded the operating system.....
Come on Apple.....get this issue sorted out!

Just out of warranty. This is a software issue. everything was ok until the software update. Apple just need to sort it out.

Anybody had luck with there wifi greyed out after update to IOS 7

I've been trying all sorts to get my wifi working on my iphone 4s, been searching the internet to solutions, turning airplane mode on and reseting network settings - didn't work, reseting all settings - didn't work. Some have said that if you erase all content and data, basically a factory reset turning it back into what it was when you got it out the box works, but it doesn't, for starters it still doesn't go back to IOS 6 (what it would of been out the box), its still IOS 7, when you go into setting/general/about section and look at the wifi there is no wifi address. Has anybody had any luck with solving it, tried going through apple but they say because its out of warrenty i've got to pay for a repair, seen as its happened ever since putting IOS 7 on my phone, i see that as apple broke my phone, so they should fix it for free.

This is almost always a hardware problem that requires repair or replacement of the phone. Downgrading to iOS 6 wouldn't help, even if you could. There's a small chance that it can be fixed by following the suggestions in this support article:
iOS: Wi-Fi settings grayed out or dim
FYI, do not try the "freezer" or "hairdryer" methods you may see posted. At best they are temporary fixes and are very likely to cause additional damage to the phone...

Any luck with a 3.1.3 fix? Aside from the one(s) that have yet to work

Any luck with 3.1.3 anyone? I am captive to a wi-fi connection and its getting really annoying not being able to use the 3g service when I leave my house. The solution(s) provided so far have done nothing to fix the problem. This is in regards to apps crashing and no internet service while on the iphone 3g network.

I have tried all the fixes suggested multiple times then went to apple store and the guy told me I should buy a new phone? Just hoping the issue isn't dead as it still seems to be a problem for some, lots of threads about it still being reported as an issue.

RAM: Has anyone else had good luck with Corsair?

First of all, thanks Bas and Scottg26 for pointing out the correct version of Memtest86+.
I know that Corsair has a crappy rep around this forum when it comes to the Athlon 64. However, I've had nothing but good luck so far (knock on wood). I've been up and running for almost a month now with no BSODs and the computer has booted every time so far. I'm using Corsair TwinX 1024 LL in slots 1 and 2 with the speed settings on Auto in the BIOS with a voltage of 2.6. I've run Prime95 for up to 10 hours or so with no errors and I just ran one pass of Memtest86+ v1.00 with no errors. It took 18:50 and showed the following settings:
Memory: 1024M 1447MB/S
Settings: RAM: 200Mhz(DDR 400) / CAS:2-3-2-6 / Single Channel (64 Bits)
However, I will point out that the only real world test it's really passed so far is playing Call of Duty.
Here's a link to the actual RAM on NewEgg: http://www.newegg.com/app/ViewProductDesc.asp?description=20-145-435&catalog=147&manufactory=BROWSE&depa=1
Is anyone else happy with their Corsair RAM so far or did I just get extremely lucky?

Quote
Originally posted by amxandy
I read the horrible reviews for Corsair on this forum after placing my order for a stick of Corsair CMX512-3200C2PRO memory (I couldn't resist the activity lights). I have had no problems running at specified memory timings. I have always had good luck with Corsair and will continue to use them.
Yeah They are neat at that. Question is how well do they overclock?
I'm getting a 28Mhz fsb overclock out of these dimms that I have and They are used I admit, But like the seller said they are great overclockers!

No luck with SCT

I tried overstock and J Crew and didn't get any pop ups. I even made sure my pop up blocker was off and that I'm opted in for offers. Is it because I was in using my phone? Wasn't sure if that matters or not.

texasmommy wrote:
Ok, I should've known that. Lol. I was hoping I'd get an offer based on my TU score. Thanks!Although the SCT doesn't work on Synchrony Bank, the best part about them is that they are mostlyTU pulls and after 2-3 months, the hard pulls generally fall off your report. You have 3 cards and if you have loans or a mortgage, then you would have the diversity you need to help your score improve. I've only been working on rebuilding my credit in earnest in the last 6 months. Comenity store cards are a good way have more tradelines, but the downside is that unless you have a good score to begin with then you get some credit limits like $200-$500 and YMMV on increases. Overstock and JCrew have grown the best for me and I think as my score improves, then I'll be able to get multiple increases at once rather than one monthly. I guess I'm a fan of Synchrony because Sam's Club is my smallest limit and next month I plan to ask for $5k. Someone on the forum once said only get the store cards you really plan to use and they were right because I have closed 4 and I will probably close one more if I can replace it with a bank card. Remember, each time you apply for EQ and EX, your score will take a hit, and the same with TU, but you might have better luck with Synchrony Bank.

No luck with JAR's

Im having no luck with packaging my app as a JAR at all, just a massive headache.
Im using eclipse to develop the app in and have tried to export the app to a JAR and have added the correct main class (CustomCell). When I execute the JAR file I get the error: "Could not find the main class. Program will exit."
I have read everything I can about packaging my app and it still wont work. I have tried creating the jar and then adding the manifest to it, still to no avail.
After unzipping the JAR and looking at the manifest, it contains:
Manifest-Version: 1.0
Sealed: true
Main-Class: CustomCell
Why is this not easier? The directory structure I have is as follows:
CustomCell(folder containing all class files)
CustomCell>Icons (containing all icon files)
Any help will be greatly appreciated.

Ok when I try to run from the command line I get the following:
Exception in thread "main" java.lang.NoClassDefFoundError: javax/jms/MessageList
ener
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:12
4)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$000(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:276)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:12
4)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$000(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:276)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
I think it maybe because Im using external JAR files, how do I go about including these?

Any luck with Sigma X3F raw files and 1.1?

I am still waiting to switch to Aperture as 1.0 did not support the Sigma SD-10/SD-9 raw files (.X3F).
Any luck with the latest 1.1 version? It is great that Apple revised the price on it but I still have to wait for X3F support because my camera only shoots in RAW. Converting may not be worth the effort and extra time...
Thanks,
iSrael

I am still waiting to switch to Aperture as 1.0 did
not support the Sigma SD-10/SD-9 raw files (.X3F).
Any luck with the latest 1.1 version? It is great
that Apple revised the price on it but I still have
to wait for X3F support because my camera only shoots
in RAW. Converting may not be worth the effort and
extra time...
Nope, no X3F support yet.
You can still use the program pretty well just by exporting 16-bit TIFF files from PhtooPro, just export in batch with corrections set to auto.

HT1206 i have had bad luck with computers laitly and have 5 pc allready authorised now i have a new one i cant authorise it so i can not access my itunes account can u deauthroise my pc from my accont so i can access it again

i have had bad luck with computers laitly and have 5 pc allready authorised now i have a new one i cant authorise it so i can not access my itunes account can u deauthroise my pc from my accont so i can access it again
<Email Edited by Host>

http://support.apple.com/kb/HT1420

I'm having bad luck with motherboards from Newegg.

Hi all,
I have successfully built several systems from the ground up with motherboards from Microcenter. However, I'm having no luck with the 2 motherboards i got from Newegg.
The first one, ASUS P6T, would not reboot unless the reset button was pressed a few times. Then i ordered the GIGABYTE GA-EX58-UD5 X58. I had high hopes but it too came out of the box with a problem. It start/stops/starts/stops.... I discovered that if i remove the 8pin power connecter, the mb starts but still will not post. I removed and replaced all components including the PSU and still no joy.

The original PSU i got two weeks ago for the new system is a PC Power & Cooling (PP&C )910 watt unit. I think thats plenty of power. The PSU tester diaplays the following:
+5V = 5.3
-12V = 12.2
+12V1 = 12.3
+12V2 = 12.3
+3.3V = 3.4
5VSB = 5.3
P.G. = 300ms
I plugged the PP&C 910w PSU as well as a completely different 400w PSU into the GA-EX58-UD5 with the following components removed - no drives, cards or case fans and all drive/audio/usb connectors disconnected - just the i7 920 CPU and ram - the mb acted in the same manner. Actually, its the PSU that's reacting to the motherboard i think. I can hear both PSU's "click" like its tripping a breaker then resetting - hence the mb starting and stopping.
Anyway, after i removed some and then all of the ram, the system started without stopping but still no post. I have also been getting a debug error code of 62. From what i understand, the error code indicates that the motherboard is not recognizing the ram.
It would appear that your both wrong in this case.
I searched the internet and found some posts where either the bios has to updated to accept ram i have or the ram has to be replaced with something the GA-EX58-UD5 likes. In one post, the current ram, Crucial DDR3 1066 (thats what i got), was replaced with Corsair XMS3 1333 ram and the system booted up.
I'll keep you updated.

Has Anyone had luck with finding the Gold- AT

Has Anyone had luck with finding the Gold- AT&T in New York City Area?

Has Anyone had luck with finding the Gold- AT&T in New York City Area?

Successful installation of 8iEE 8.1.7 on RedHat linux 7.2 but no luck with Oracle 9i

Hi All,
I've successfully installed Oracle8i EE version 8.1.7 on RedHat
Linux 7.2. However, I have NOT had much luck installing Oracle
9i version 9.0.1 on RedHat Linux 7.2. I am wondering if anyone
in this forum has any luck installing Oracle 9i on RedHat Linux
7.2. I am running Linux kernel 2.4.7-10.
Now I am not trying to start a shouting match here; however, it
seems to me that a person with any common sense would not run
Oracle database on a Windows platform. Instead of running it
on Windows platform, one would be much better off running it on
Linux platform. I am currently Oracle EE 8.1.7 on an dual-Intel
processor 266MHZ with 512MB of RAM with Linux as the Operating
System. I have to say that the performance of the box is really
solid. At the same time, I am also running Oracle EE 8.1.7 on
an identical hardware system with Win2K server and I have to say
that the performance system is really pitiful on this Win2k server.
The windows box can only 1 instance at a time. If I try to have
two instances running at the same time, the windows box just comes
to a screeching halt. In contrast, the Linux box really rocks. In
a testing environment, I have 3 instances running at the same time
and the linux is barely breaking a sweat. I am getting maximum
performance out of the linux box because I recompile the linux kernel
to optimize the box to run Oracle database.
Having said that, as an Oracle DBA newbie (with less than six months
of Oracle DBA experience, the last ten years as a Cisco/Unix Engineer),
I find it fascinating that Oracle is only certified to run on SUSE (may
be I am wrong and someone can correct me on this one) when RedHat is
probably the dominant Linux distro. It took three days to get Oracle 8i
version 8.1.7 to install on RedHat Linux 7.2. Why Oracle is slowed to
support Linux RedHat is something I just don't understand.
OK, enough of venting my frustration, if anyone has successfully installed
Oracle 9i EE version 9.0.1 on RedHat Linux 7.2, please share your knowledge.
In the mean time, if anyone interested in obtaining instructions on howto
install Oracle 8i version 8.1.7 on Redhat Linux 7.1/7.2, send me an email
at [email protected] and I will send the instructions. The instructions
are written specifically for "windows dummies" so it is very to read and
follow. If you have been Unix for a long time, there will be instructions
in there that are so easy some of you may ask why put those in there in the
first place. My response would be: "windows dummies".
Regards,
Michael (david)

I very much agree with you Oracle is working very much better on Unix/Linux than Windows BUT in many cases you are obliged to use windows ( in Case that My company high managment enforce it ) , I have installed 9i on Windows and Linux , I am herunder including the full details :
========================================================================
Installing Oracle 9i on Linux
     Linux : Redhat 7.2
     Oracle : 9i Server EE 9.0.1.0.0
     RAM Used : 256 M Ram
     Hard Disk : IDE RAID
     Linux Kernel : 2.4.4-10
     JDK : Blackdown jdk118_v3 => downloaded from www.blackdown.org
     All shell here is the Bash shell ( Bourne again shell )
1.     To run a shell script over Linux , just drag the shell file from the file manager and drop it to a shell window
     Be sure to have swap space of 400 M or more
     If the systems stop responding for some time , leave it , it will continue
     Be sure to make a stage area for the CDs # 2 , 3 only because you will start from the CD 1 but after going in the installation the CDROM freezes and refuses to open door to replace CD ,, in this case you will switch to the last 2 CDs from the stage area
     Make sure you have the following executables at /usr/bin : MAKE , AR , LD , NM , C for Unix that is installed during Linux installation from the distribution media
Steps ( Root User ) :
1.     be sure to have to have your server domain is like hostess.com.eg and you can be able to ping it
     open /etc/hosts
     add a line as follows ( for instance ) :
     192.168.0.11 hostess.com.eg hostess
     ping hostess.com.eg
     ping hostess
     ping 192.168.0.11
     be sure to have a replay for all of them
2.     install JDK inside the /usr/local directory => after downloading the JDK you can easily decompress it but just clicking at it using the GUI
3.     get to the / prompt
4.     type ln s /usr/local/jdk118_v3 /usr/local/java
5.     download binutil RBM from Redhat for version 7 of Linux to downgrade binutils for Linux 7.2 or you will encounter an error at the third CD set
6.     download it from : ftp://ftp.redhat.com/pub/redhat/linux/7.0/en/os/i386/redhat/rpms/binutils-2.10.0.18-1.i386.rpm
7.     run it as follows : rpm -Uvh force nodeps binutils-2.10.0.18-1.i386.rpm
8.     change to /proc/sys/kernel
9.     type cat sem
10.     you will get : 250 32000 32 128
     250 => SEMMSL
     32000 => SEMMNS
     32 => SEMOPM
     128 => SEMMNI
11.     you need to have the SEMOPM to be 128 , to do so , locate the file called sem open it replace the value of 32 with 128
12.     type again cat sem to be sure of taking the required effect
13.     after the installation ends just re-install the 7.2 utils again as follows :
14.     rpm -Uvh force nodeps binutils-2.11.90.0.8-9.i386.rpm
15.     you can find the last RPM at the 7.2 CD set
16.     after downloading the Oracle files from the net you need to decompress it as follows (one step) :
     zcat linux9i_disk1.cpio.gz | cpio idmv
     zcat linux9i_disk2.cpio.gz | cpio idmv
     zcat linux9i_disk3.cpio.gz | cpio idmv
17.     you can decompress them at 2 steps as follows :
     gunzip linux9i_disk1.cpio.gz
     gunzip linux9i_disk2.cpio.gz
     gunzip linux9i_disk3.cpio.gz
     cpio idmv < linux9i_disk1.cpio
     cpio idmv < linux9i_disk2.cpio
     cpio idmv < linux9i_disk3.cpio
18.     Now you have 3 directories , have care when Burning them to CD because you need to take care of paths
19.     if you have downloaded the files via a Windows machine and have a MKS installed over it you can easily invoke Visual Pax and decompress the files at one go using the GUI program
20.     log on to Linux as Root and run commands in the file commands.txt
21.     log on as user Oracle to be sure that its created
22.     log on as root again
23.     get to the directory of /home/oracle
24.     enable showing the system files
25.     open the file of .bash_profile
26.     add the accompanied bash file contents at the end of it to set the environment variables
27.     log on as user Oracle
28.     open shell and type set and be sure that environment variables are set correctly
29.     open shell and change to the cdrom by typing cd /mnt/cdrom => Linux 7.2 is an auto mounting OS so you at no need to mount the CD drive prior to using it and if you need to mount it just type : AS ROOT
     mount t iso9660 /mnt/cdrom /cdrom
     this is surly after creating a directory at / called cdrom
30.     Start the installer ( as Oracle User ) by typing ./runinstaller
31.     the installer will ask you to run a started script as root , you may open a shell and type su then open Nautilus ( if using Gnome or File manager as super user if using KDE ) and drag the noted file to the shell screen and press enter ,, after it is ended continue with the installer
32.     if asked to supply JDK home directory then it is /usr/local/java
33.     Unix group Name ( to update Oracle software ) : oinstall
34.     Oracle home is : /oracle/9.0.1
35.     base directory : /oracle/orainventory
Hisham Nagia
IT Manager / OCP DBA
Hostess Egypt / EFG-Hermes - CIIC

No luck with Victoria's Secret SCT

Im in the process of rebulding my credit. Since learning about the SCT I have been approved for Simplybe and Marisota both $200 CL. I cannot get any of the others to work. My scores are very low mid to high 500s). Prior to learning about the SCT I did a few HP apps within the last two months. I recently was approved for a Walmart store card $400, Fingerhut, a WF secured card and a secured card through my credit union. There are a few cards I wish I could get before gardening. One of the cards I really want is VS. I keep reading how its an easy approval via the SCT but Ive had no luck. I just had a relative with fairly good credit test the SCT and my relative was approved for $1000 limit but was uninterested. So I know its not my computer or browser, its just me. I do not plan on doing anymore HPs for at least 6 months or more, but I would really like to get VS, possibly Overstock, Avenue or maybe even Gamestop. Any advice?

That was the one I really wanted too, but it eluded me for about a month.... But once I got approved for one of the cards (Express via pop up) the others popped up... The way I got it was I made an account... then one day (just randomly), I checked one of the emails from VS and through that email... I was able to get it to work. Goodluck!!

Any luck with exchanges at Apple Store?

I have read multiple complaints that ipad 2 exchanges are wors then the first one people received.
Wanted to see if anyone has had luck in the past week in getting a replacement ipad 2 w/o light bleeding issues.

Sylo wrote:
I'm on my 4th one going for the 5th tomorrow, its a funny thing this light bleed becuase the guy at the Apple store said that there isn't any iPad's out there that don't have a light bleed. furthermore he said if people say they dont have a light bleed there just lying.
So can anyone out there with a PERFECT iPad 2 come forward and show some pictures to prove this guy is wrong!
I have two 64GB AT&T Black with absolutely no display imperfections. No white spots, no yellow discoloration, no dead pixels, no light bleeding. I'd say the salesman was a salesman.
I 'tested' my displays by taking a picture with the camera lens covered and displaying it in the photo app. I couldn't tell any difference between that and the black with the unit turned off.
Edited to add: I ordered these online at 6:55pm PDT Mar 11 and received them at 10:20am Mar 29.
Message was edited by: crh24

Netra T1 105, issue with LOM prompt

Hello all,
I am having issue in accessing OK prompt from LOM menu. When I do the poweron, it sits on LOM event: power on. When I do, console it shows stand by. Please help me out here as I am working on making this server to respond. Thanks.

Hi. Could you tell me if patches 108620-04 or higher & 108673-02 or higher are already installed on the Netra t1 105?
*How to determine if the Netra[TM]T1 model 105 server PROM patches are current [ID 1010561.1]*
Description
How to determine if patches 108620-04 or higher & 108673-02 or higher are already installed on the Netra t1 105.
Steps to Follow
These two patches have to do with OBP(OpenBoot PROM) and the user prom.
108620-04 Hardware/PROM: Netra t1 Standalone User PROM Update
108673-02 Hardware/PROM: Netra t1 System PROM Update
108673-02 delivers OBP 3.10.27.
This can be checked via the OBP with the .version command.
OBP Example:
ok .version
Release 3.10.27 ME created 2000/06/22 16:45
OBP 3.10.27 2000/06/22 16:45
POST 1.17.0 2000/03/06 12:18
This can be checked via Solaris[TM] with: prtconf -V
Solaris[TM] Example:
# prtconf -V
OBP 3.10.27 2000/06/22 16:45
If you see Release 3.10.27 you do not need to install this patch.
108620-04 delivers the dropins
These can be checked at the ok prompt with the show-dropins command.
Example:
ok show-dropins
Dropins for Flash device: /pci@1f,0/pci@1,1/ebus@1/flashprom@10,0
Dropin name Size Checksum Date Date Version Vendor
created flashed
OBP 4a1bc cc30 06/22/2000 3.10.27
keyboards bf0 dd75
fonts af6 6b86
obdiag bd34 aec5
pci1002,5654 d34 7190
pci1002,4755 cb0 c382
pci1002,4750 1794 3f65
class060400 44e 17cc
userprom 246 b3ba
pci108e,1001 32a4 d714
pci1011,22 47e 69c9
pci1000,3 2824 feb4
class010100 1210 ce35
i2c 1fe 5a8f
i2c-cs2 1f4 bd2a
nvinit- 172 0 10/08/1999 00/00/0 0.0
POST 45340 519 03/06/2000 1.17.0
PROM size = 100000 bytes Available for Use = 3d958 bytes
Dropins for Flash device: /pci@1f,0/pci@1,1/ebus@1/flashprom@10,400000
Dropin name Size Checksum Date Date Version Vendor
created flashed
ebus-14.400000 b0 9fa6 06/09/1999 06/09/1999 1.0
SUNW,flapjack
probe+ 250 c2b5 01/06/2000 01/06/2000 2.0
SUNW,flapjack
banner- 1aa 6f35 12/10/1999 12/10/1999 1.0
SUNW,flapjack
tty-control 150 a863 12/01/1999 12/01/1999 1.0
SUNW,Flapjack
PROM size = 200000 bytes Available for Use = 1ff984 bytes
Dropins for Flash device: /pci@1f,0/pci@1,1/ebus@1/flashprom@10,800000
Dropin name Size Checksum Date Date Version Vendor
created flashed
PROM size = 200000 bytes Available for Use = 200000 bytes
ok
The part that is of interest is about two thirds of the way down to do
with ebus-14.400000, probe+, banner- and tty-control.
If the Checksum matches you you don't need to install this patch.
On the other hand it won't cause any problems to reinstall both patches.

No luck with LOM

Similar Messages

Maybe you are looking for