No luck with rox plus magickthumbails & videothumbnails

I installed rox, and then magickthumbnails and videothumbnails, except I don't get any thumbnails.  I did this:
rox:
  su -
  pacman -S rox
  pacman -S magickthumbnail
  pacman -S videothumbnail
  exit
  /usr/bin/magickthumbnail
  /usr/bin/videothumbnail
I browse to a directory of jpgs and bmps, and i dont get any thumbnails.  I noticed the right-click option in rox to see thumbails, and it made 1 thumbail for a MOV file I had.  maybe videothumbnail is working, but the ones for pictures are not.
any ideas?

Maybe this is the reason.
http://bbs.archlinux.org/viewtopic.php? … 54#p337154

Similar Messages

  • Integrating Oracle Help with Discoverer Plus

    Folks -
    Has anyone tried integrating Oracle Help with Discoverer Plus. I want to add my customized help (generated in RoboHelp - Oracle) to the help in Discoverer Plus. Is this doable? I don't want to use Oracle Help exclusively unless I need to.

    Hi, Johnny.
    I think you might have better luck getting your question answered on the forum for Discoverer at Discoverer
    I'm not sure whether Discoverer supports extensions, but I would assume that they do in some way. Discoverer ought to provide a standard mechanism for extensions to provide help content.
    Hope this helps,
    Ryan Pollock
    Oracle Help Team

  • TS1398 Got the dreaded no wifi on my wife's iPhone 4S. Wifi greyed out and no luck with the reset network instructions. Why isn't Apple addressing this issue? We are a family of Apple product users, 2 ipads, an ipad mini, 4 iPhones but one isn't working!

    Got the dreaded no wifi on my wife's iPhone 4S. Wifi greyed out and no luck with the reset network instructions. Why isn't Apple addressing this issue? We are a family of Apple product users, 2 ipads, an ipad mini, 4 iPhones but one isn't working! Issue began whenwe upgraded the operating system.....
    Come on Apple.....get this issue sorted out!

    Just out of warranty. This is a software issue. everything was ok until the software update. Apple just need to sort it out.

  • Anybody had luck with there wifi greyed out after update to IOS 7

    I've been trying all sorts to get my wifi working on my iphone 4s, been searching the internet to solutions, turning airplane mode on and reseting network settings - didn't work, reseting all settings - didn't work. Some have said that if you erase all content and data, basically a factory reset turning it back into what it was when you got it out the box works, but it doesn't, for starters it still doesn't go back to IOS 6 (what it would of been out the box), its still IOS 7, when you go into setting/general/about section and look at the wifi there is no wifi address. Has anybody had any luck with solving it, tried going through apple but they say because its out of warrenty i've got to pay for a repair, seen as its happened ever since putting IOS 7 on my phone, i see that as apple broke my phone, so they should fix it for free.

    This is almost always a hardware problem that requires repair or replacement of the phone. Downgrading to iOS 6 wouldn't help, even if you could.  There's a small chance that it can be fixed by following the suggestions  in this support article:
    iOS: Wi-Fi settings grayed out or dim
    FYI, do not try the "freezer" or "hairdryer" methods you may see posted.  At best they are temporary fixes and are very likely to cause additional damage to the phone...

  • No luck with LOM

    I am having no luck with lights out management. I'm running on the new Xserve line. I configured LOM in the Server Monitor tool. I gave the LOM a static IP based on the ethernet ID it gave. I then opened up server monitor on my Mac Pro and plugged in the IP, user and pass and am just getting waiting for results. The Xserve is plugged in on ethernet port 1 so I set up LOM on port 1. Any ideas?

    Hi
    Have you looked at these yet?
    http://www.apple.com/support/downloads/xservelightsoutmanagementfirmwareupdate11 .html
    http://docs.info.apple.com/article.html?artnum=304896
    Hope this helps, Tony

  • Any luck with a 3.1.3 fix? Aside from the one(s) that have yet to work

    Any luck with 3.1.3 anyone? I am captive to a wi-fi connection and its getting really annoying not being able to use the 3g service when I leave my house. The solution(s) provided so far have done nothing to fix the problem. This is in regards to apps crashing and no internet service while on the iphone 3g network.

    I have tried all the fixes suggested multiple times then went to apple store and the guy told me I should buy a new phone? Just hoping the issue isn't dead as it still seems to be a problem for some, lots of threads about it still being reported as an issue.

  • Backspace with SQL*Plus

    Hi,
    when I use backspace on my keyboard with SQL*Plus or svrmrgl,
    the symbol ^h is comming on my screen.
    But I want delete the character before the cursor.
    Any idea ???
    Thanks
    null

    Pardon my ignorance, but what's the significance of the N'<string>' construction? That's not one I'm familar with.
    Justin

  • RAM: Has anyone else had good luck with Corsair?

    First of all, thanks Bas and Scottg26 for pointing out the correct version of Memtest86+.
    I know that Corsair has a crappy rep around this forum when it comes to the Athlon 64.  However, I've had nothing but good luck so far (knock on wood).  I've been up and running for almost a month now with no BSODs and the computer has booted every time so far.  I'm using Corsair TwinX 1024 LL in slots 1 and 2 with the speed settings on Auto in the BIOS with a voltage of 2.6.  I've run Prime95 for up to 10 hours or so with no errors and I just ran one pass of Memtest86+ v1.00 with no errors.  It took 18:50 and showed the following settings:
    Memory: 1024M  1447MB/S
    Settings: RAM: 200Mhz(DDR 400) / CAS:2-3-2-6 / Single Channel (64 Bits)
    However, I will point out that the only real world test it's really passed so far is playing Call of Duty.
    Here's a link to the actual RAM on NewEgg:  http://www.newegg.com/app/ViewProductDesc.asp?description=20-145-435&catalog=147&manufactory=BROWSE&depa=1
    Is anyone else happy with their Corsair RAM so far or did I just get extremely lucky?

    Quote
    Originally posted by amxandy
    I read the horrible reviews for Corsair on this forum after placing my order for a stick of Corsair CMX512-3200C2PRO memory (I couldn't resist the activity lights). I have had no problems running at specified memory timings. I have always had good luck with Corsair and will continue to use them.
    Yeah They are neat at that. Question is how well do they overclock?
    I'm getting a 28Mhz fsb overclock out of these dimms that I have and They are used I admit, But like the seller said they are great overclockers!

  • No luck with SCT

    I tried overstock and J Crew and didn't get any pop ups. I even made sure my pop up blocker was off and that I'm opted in for offers. Is it because I was in using my phone? Wasn't sure if that matters or not.

    texasmommy wrote:
    Ok, I should've known that. Lol. I was hoping I'd get an offer based on my TU score. Thanks!Although the SCT doesn't work on Synchrony Bank, the best part about them is that they are mostlyTU pulls and after 2-3 months, the hard pulls generally fall off your report.  You have 3 cards and if you have loans or a mortgage, then you would have the diversity you need to help your score improve.  I've only been working on rebuilding my credit in earnest in the last 6 months.  Comenity store cards are a good way have more tradelines, but the downside is that unless you have a good score to begin with then you get some credit limits like $200-$500 and YMMV on increases.  Overstock and JCrew have grown the best for me and I think as my score improves, then I'll be able to get multiple increases at once rather than one monthly.  I guess I'm a fan of Synchrony because Sam's Club is my smallest limit and next month I plan to ask for $5k. Someone on the forum once said only get the store cards you really plan to use and they were right because I have closed 4 and I will probably close one more if I can replace it with a bank card.   Remember, each time you apply for EQ and EX, your score will take a hit, and the same with TU, but you might have better luck with Synchrony Bank. 

  • No luck with JAR's

    Im having no luck with packaging my app as a JAR at all, just a massive headache.
    Im using eclipse to develop the app in and have tried to export the app to a JAR and have added the correct main class (CustomCell). When I execute the JAR file I get the error: "Could not find the main class. Program will exit."
    I have read everything I can about packaging my app and it still wont work. I have tried creating the jar and then adding the manifest to it, still to no avail.
    After unzipping the JAR and looking at the manifest, it contains:
    Manifest-Version: 1.0
    Sealed: true
    Main-Class: CustomCell
    Why is this not easier? The directory structure I have is as follows:
    CustomCell(folder containing all class files)
    CustomCell>Icons (containing all icon files)
    Any help will be greatly appreciated.

    Ok when I try to run from the command line I get the following:
    Exception in thread "main" java.lang.NoClassDefFoundError: javax/jms/MessageList
    ener
    at java.lang.ClassLoader.defineClass1(Native Method)
    at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
    at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:12
    4)
    at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
    at java.net.URLClassLoader.access$000(URLClassLoader.java:56)
    at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:276)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
    at java.lang.ClassLoader.defineClass1(Native Method)
    at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
    at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:12
    4)
    at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
    at java.net.URLClassLoader.access$000(URLClassLoader.java:56)
    at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:276)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
    I think it maybe because Im using external JAR files, how do I go about including these?

  • Learning PL/SQL with SQL plus

    I'm looking to teach myself PL/SQL with SQL Plus, it's a works pc so I can not use any other software than SQL plus.
    When starting SQL plus I'm asked for a username, password and host string.
    I'm taking it the host string is the db I want to connect to and obviously supply the username and password for level of access?
    Also what I ideally need is a sample db on my local machine to connect to with SQL plus to learn that way.
    Can anyone point me in the right direction please. Any help is greatly appreciated.

    Use the net8 configuration assistant preferably as it'll get the syntax correct.
    Otherwise you copy the sample one up one folder and edit that.
    Connection information (SID, Server/IP, port number) you'll have to get off your DBA.
    The name at the start of a tnsnames entry is the name that you want to reference the database as, so you can call it FRED if you like.
    e.g.
    FRED =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS =
            (PROTOCOL = TCP)
            (HOST = <server name or ip address>)
            (PORT = <port>) -- usually 1521 but can differ if more than one instance on the server
        (CONNECT_DATA =
          (SID = <database SID>) -- the name of the database on the server.
      )Once that's set up you can then log onto the database in the following way:
    sqlplus <user>/<password>@fred
    What happens is that the TNS Listener service (that should be running on your PC) will look up "fred" in the tnsnames.ora file and then use the information from that to make the connection to the server on the correct port and connect you to the actual database on there.
    After that.... it's up to you.
    :)

  • Suddenly my mouse has a green Circle with a Plus sign in the middle?

    Suddenly my mouse has a green Circle with a Plus sign in the middle?

    Thanks Had to close down and it went away, Mail was not responding. forced close and shut down. restarted and OK.

  • Okay, what is the deal with ITUNES plus?

    I've read multiple threads and post. I've downloaded the new version. From what I've gathered, it seems only EMI artists are currently part of the ITUNES plus? I also understand you are "supposed" to be getting a better quality of sound from artists you download from Itunes Plus? Furthermore, I see they increased the price for a single download for any artist associated with ITUNES plus. Now... anyone care to explain to me what all this mention of DRM-free means? Does this mean we can actually convert our purchases to mp3's and upload them up to our non-apple music player? Because this is all I care about at this point. However, since it's only restricted to EMI artists and I haven't a single tune downloaded from that companies' artists, this new version means squat to me. Does this mean, eventually the other companies will jump on the band wagon, and we'll be able to finally convert our music to play on any music player? I hope so. But for now, it just seems like Apple just found a way to charge us more for their songs. Hmmm?
      Mac OS X (10.4.9)  

    Almost since the inception of iTMS and later iTS the Internet has been rife with people complaining about Apple's use of DRM on music tracks. Obviously no record company was going to sign up to DRM-free music on the first day of iTMS as it seemed obvious that it would be onward distributed with no financial recompense to the record company so DRM was used to allow the track to be played on five computers and any number of connected iPods (very generous really). However acknowledging the discontent around the globe Apple's CEO Steve Jobs wrote his Thoughts on Music. Shortly after that EMI obliged Apple's request and agreed to offer DRM-free music that you could potentially totally abuse and send to all your friends (Don't though). Apple and EMI believe that, in actual fact, the ease of iTS will mean that people won't do that but they will actually buy music themselves. Actually iTunes Plus trackscontain your iTS username so it's traceable. 
    Advantages of iTunes Plus:
    256k (vs 128k) encoded tracks - better quality for the serious audiophiles.
    DRM-free means you can load your tracks on to your generic mp3 player/mobile phone etc.
    Freedom - not tied in to the iPod platform (a big risk to Apple IMHO).
    Disadvantages of iTunes Plus:
    Higher cost.
    Greater file size = less tracks on your iPod.
    EMI tracks only.
    I think it's a good idea to offer the choice, and a few cents extra for the freedom is probably worth it. I see this as Apple driving and leading the music industry to improve the service for us the customer. Happy Days.
    mrtotes

  • Why I can't mount with Rox but works from a terminal?

    Hi,
    I'm using Xfce4.2 (RC-3) and I use rox as file manager. The thing is if I try to mount a cd by clicking on the icon while using rox, nothing is happening. But if I open-up a terminal and type "mount /mnt/cd" it works!  :shock:
    As root, I can mount with rox without problem. I dont think its a permission problem, because like I said, from a terminal I can mount without problem (as normal user)...
    Any idea?
    Thanks

    Gnipper wrote:
    I believe Rox reads from the file /etc/fstab in order to mount drives. Check that this file has Owner, Group and World read permissions set. i.e. start Rox as root, navigate to /etc, right click on fstab then select 'Properties'. Under 'Permission - Read' make sure the Owner, Group and World boxes are ticked.
    You might find that the Xfce file manager (xffm) has the same problem mounting drives until you change the fstab permissions. Hope this helps.
    Gnipper
    Bingo! You're right Gnipper!
    Thank you very much

  • Downloading and installing Oracle (with sql plus) on Windows 7 Professional

    Hi,
    I got a new laptop which has Windows 7 Professional (64 bit). I intend to download Oracle 10g and would like to install bothe the database and the sql plus in this system.
    I would appreciate if somebody could provide me a link to the appropriate database (with sql plus installation capability). Also if available the installation guide.
    Thanks in advance.

    Hello,
    Windows 7 Professional (64 bit). I intend to download Oracle 10g and would like to install bothe the database and the sql plusOracle *10g* is not certified on Windows *7*, except with the latest patchset *10.2.0.5*, and its Premium Support ended on the *31st of July 2010*.
    You should download Oracle *11.2* which is certified on Windows *7 - 64 bit*.
    You'll find the Documentation and Download tabs on the link below:
    http://www.oracle.com/technetwork/database/enterprise-edition/overview/index.html
    About SQLPlus, it's delivered with Oracle Server and, in *11g*, you can still use it from a DOS box. If you intend to have a Graphical Tool, you should use Oracle SQL Developer instead:
    http://www.oracle.com/technetwork/developer-tools/sql-developer/overview/index.html
    Hope this help.
    Best regards,
    Jean-Valentin

Maybe you are looking for