No mailboxes show up in the Mailbox window

I'm kind of at a loss at this point. Since this morning, none of my mail boxes are showing up. The accounts are there. They get mail. But I can't see anything in the Mailbox window. Just the separator going down the vertical and a grey section on both sides of it.
I've deleted the accounts. Deleted the ~/Library/Mail folder. Deleted the mail plist file.
When I add an account back, I can see it in the accounts list in preferences, but still can't see it in the Mailbox window.
Anyone seen anything like this?
I get the following message starting Mail...
5/27/10 8:15:41 AM Mail[337] * -[NSCFArray insertObject:atIndex:]: attempt to insert nil
And the following stack trace when I attempt to close the Mailbox window...
5/27/10 8:18:08 AM Mail[337] An exception was thrown '* -[NSCFDictionary setObject:forKey:]: attempt to insert nil value (key: SelectedMailboxes)'. Stack trace:
0 CoreFoundation 0x00007fff80a97cc4 __exceptionPreprocess + 180
1 libobjc.A.dylib 0x00007fff84a750f3 objcexceptionthrow + 45
2 CoreFoundation 0x00007fff80a97ae7 +[NSException raise:format:arguments:] + 103
3 CoreFoundation 0x00007fff80a97a74 +[NSException raise:format:] + 148
4 Foundation 0x00007fff80cbaa9b -[NSCFDictionary setObject:forKey:] + 227
5 Mail 0x0000000100045045 0x0 + 4295249989
6 Mail 0x0000000100044f79 0x0 + 4295249785
7 Mail 0x00000001000b252e 0x0 + 4295697710
8 AppKit 0x00007fff87b51f71 -[NSWindow _document:shouldClose:contextInfo:] + 133
9 AppKit 0x00007fff87b51dd0 -[NSWindow _close:] + 142
10 AppKit 0x00007fff87a6a152 -[NSApplication sendAction:to:from:] + 95
11 AppKit 0x00007fff87a6a0b1 -[NSControl sendAction:to:] + 94
12 AppKit 0x00007fff87af5a0b -[NSCell trackMouse:inRect:ofView:untilMouseUp:] + 1715
13 AppKit 0x00007fff87b26536 -[NSButtonCell trackMouse:inRect:ofView:untilMouseUp:] + 555
14 AppKit 0x00007fff87af44b5 -[NSControl mouseDown:] + 624
15 AppKit 0x00007fff87b51d36 -[_NSThemeWidget mouseDown:] + 87
16 AppKit 0x00007fff87a0e763 -[NSWindow sendEvent:] + 5409
17 Mail 0x0000000100042f05 0x0 + 4295241477
18 AppKit 0x00007fff87943ee2 -[NSApplication sendEvent:] + 4719
19 Mail 0x0000000100033898 0x0 + 4295178392
20 AppKit 0x00007fff878da922 -[NSApplication run] + 474
21 AppKit 0x00007fff878d35f8 NSApplicationMain + 364
22 Mail 0x0000000100001828 0x0 + 4294973480
)

paulmolles,
You said: ...but I still can't see any calendars listed in the calendar pane. I've been creating new calendars, there are 23 now, and not a one of them shows up on the list.How do you know that you have 23 if you you are unable to see them?
You also said: And at one point last week it erased all my apple contacts.Do you mean that your address book contacts were erased?
Unfortunately I do not know enough about Entourage and Syncing to provide you with an answer regarding Entourage, but I noted that nsxstorm has provided some good advice to another user regarding Entourage. Additional nsxstorm posts regarding Entourage.
In the interim, I would recommend that you Backup your database (iCal>File>Back Up Database...) and then revert to the database (iCal>File>Revert to Database Backup...).
Let us know what happens.
;~)

Similar Messages

Cs3 only showing files in the Navigator Window - can't edit?

Hi there!
I have CS3, using Windows 7.
A little over a week ago, I had to re-install cs3 when i could no longer open any files.
Images only show up in the Navigator window and I can see the image's histogram.
However, no image shows in the main window, even after changing display modes, etc.
When I did the re-install, we were back to normal operations, but after about a week and a half
of use, I'm back to the same problem???
I could re-install again, of course, but I'd love to know if there's another solution to this problem.
I'm using a licensed version...purchased by me, from adobe in '07.
Thanks so much for any information! I appreciate any help!
Michelle

hey bart! thanks for your reply!
i tried that and nothing changed,
but i did check my display settings and somehow was
over on a dual monitor?
i only have one monitor and
i never messed with that setting.
plus, i was able to see images one minute and not the
next, so i'm not sure what's going on with it...
but, i changed to single monitor and it's working again!
if anyone knows why that happened, please lmk.
thanks again!

Connect macbook pro and imacac shows up in the finder window under shared b

I have turned on file sharing on both. My imac shows up in the finder window under shared but the macbook won't connect. Is there something else i need to do?

Same problem. Let me know if you find anything please. Thanks.

Preview doesn't show up in the capture window

When trying to capture, the video preview doesn't show up in the capture window, only the color bars. I am able to run my transport with the buttons and the key commands, so I know the Canon ZR500 is really communicating (easy setup: DV-NTSC), via firewire. My scratch disk is a G-Raid hooked up through the firwire 800 input. The crazy thing is, it worked only one time. I've wasted one whole day and this morning, restarting, rebooting, unplugging, different tapes, etc. Next step is takew my entire setup to the so-called Genius Bart and see if Apple's Geniuses know anything about Apple software. Frustrating as ****. I will never buy Apple again.

Careful about editorializing. There are lots & lots of Mac users who are successfully capturing from Canon camcorders. I am one of them, and have never had a problem. So there is something in your setup that needs to be uncovered, it's not FCE or Canon per se.
One observation, you have a small hard drive (100GB) and even though you appear to have 59GB free, that's actually not a lot of space. One hour of DV consumes about 13GB and during capture the Mac temporarily needs nearly 2x that space, which means your system is using the 'inner' cylinders of the hard drive, where performance slows down; this could explain your dropped frames problem. Can you move some stuff off your system HD onto your G-RAID (say, your iPhoto and iTunes libraries if you are using those apps, they often take a lot of disk space)?

Everytime I open a new window to browse, in this new window I would right click to open link in new tab but the new tab always shows up in the other window.

I would click a link which opens a new window. Then in this new window, I would right click to open link in new tab. The new tab does not show up in this new window. It instead shows up in the original browser window. How can I make the new tab show up in the same window?

Firefox did have a behavior where some new windows -- those considered to be dialogs -- could not have new tabs, so new tabs were diverted to the window from which the dialog was opened.
According to the bug tracking system, a fix is in the works:
[https://bugzilla.mozilla.org/show_bug.cgi?id=644729 644729 – Popup window with all toolbars visible causes new tabs to open in another browser window] referencing [https://bugzilla.mozilla.org/show_bug.cgi?id=485237 485237 – Need to treat popups consistently].
That second ones says Target Milestone: Firefox 12, so the fix probably didn't make it into Firefox 11.
WORKAROUNDS
That first bug says there is an add-on to work around this -- it enables the middle mouse button to open links in a dialog window: [https://addons.mozilla.org/en-US/firefox/addon/bug-586234-unfixer/ Bug 586234 Unfixer :: Add-ons for Firefox]. I haven't tried it myself.
Old forum thread cross-reference: [https://support.mozilla.org/en-US/questions/824649 When I open a new tab it opens in the wrong window | Firefox Support Forum | Firefox Help]

Hi, I have trouble loading my iPhone 5 photos into Aperture. The iPhone icon appears in the import window, but the images won't show up in the loading window.

Hi, I have trouble loading my iPhone 5 photos into Aperture. The iPhone icon appears in the import window, but the images won't show up in the loading window

The iPhone icon appears in the import window, but the images won't show up in the loading window
Do your images show, if you disable the option "Do not import duplicates"? If yes, then check, if the images have already been imported, eg. using Photo Stream, if you are using Aperture 3.3 or later.
Aperture 2, Mac OS X (10.6.8)
Is your profile signature above still current?

HT4174 Not sure what I did but projects are not showing up in the video window as i skim... Event footage does but project footage has sound but the video screen is gray... Hwo do I get the vido to show in the viewer?

Not sure what I did but projects are not showing up in the video window as i skim... Event footage does but project footage has sound but the video screen is gray... How do I get the vido to show in the viewer?

So you can ping and nslookup from your ms to these agents and vice versa right? I wouldn't do a manual install, I would push the agent from the management server. You can uninstall the agent manually, or use cleanmom to get rid of them. Then
do an install from the console. When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
From Holmans post on this:
e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
The MOM Server could not execute WMI Query "(null)” on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access. If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed. We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.
3. Inspect WMI service, health, and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

No apps are showing up in the desktop window.

I have Creative Cloud installed, the desktop window shows up but there are no apps in the window, the time icon just sits and spins and spins. We have a company membership. What's wrong?

BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html
or
Mac Spinning Wheel https://forums.adobe.com/message/5470608
-Similar in Windows https://forums.adobe.com/message/5853430

Where is the Show button in the itunes window?

I'm trying to add songs from my library on my laptop to my parents computer. I've already turned on home sharing. But in the helpful tips it says to use the show button at the bottom of the itunes window and I cannot find it.

Welcome to the Apple Community Gophergirl22.
Are you sure you have set up home sharing and not sharing.

Aperture opens and always shows processing in the activity window

Aperture 3 opens and every time shows activity of approx 800 photos being updated in the Library

800 Images shouldn't take much more than an hour. At the same time, you should _never_ force quit a database. After any force-quit, you should at the least repair, and consider rebuilding, your database. See this Apple page for instructions.
Is there anything unusual about those 800 Images?
I suggest repairing your Library, then letting Aperture run unmolested overnight, then reboot and see if the Activity Window reports any processing. Post back.

I'm trying to import some Hi8 into FCPX via a Canon GL2. Although the footage shows up in the import window, it says "Camera not controllable". The manual import button does activate, but footage is not actually being imported. Any ideas? Thanks

I'm trying to import Hi8 into FCPX via a Canon GL2. Although the footage appears in the import window, it says camera not controllable. The manual import buttons activate, but the footage is not actually importing. Any ideas? Thanks so much.

What Tom said.
Or you may be able to import using a different program - try with Quicktime Player, "New Movie Recording". If the camera appears as an option, it should work.

"shared" section does not show up in the itunes window

I'm trying to use Home Sharing on iTunes but the "shared" section does not show up on the left hand side of the screen where it should be, so now I cannot use home sharing. Help?

It doesn't show up until you go to the iTunes Advanced menu and select "Turn on Home Sharing".

Why do completed reminders still show up in the notification window?

Even after the reminder is marked as completed, they still remain in the notification window. The only way I've found to remove them is to kill of the reminder time on the task.
Thanks!

Yah, I've noticed that too. And a reminder I'd set for when i left work went off the subsequent day Arrggh. Still working on all the kinks lol

My guest account is enabled, but does not show up in the login window. I'd like it to, thanks!

I've tried disabling then enabling it, but it does not appear.

Have you tried a safeboot? It can fix allot of account issues. Like accounts vanishing from the login list.
if that doesn't work, You change the login window to Name & Password, then you can try logging in with the account name "guest". dos it let you login?
if that doesn't work, can you post the output of "dscl . read /users/Guest" ? (skip JPEGPhoto)

Some downloads show up in the downloads window as "cancelled", and although I can resume the download by clicking on the icon, the download doesn't then show up in the target folder--how can this be fixed?

This happens a lot when I try to download and ".exe" file. I first get the window and click that I want to save the file. Then I select the folder to save it to. Then the Firefox download window opens and the file is listed, but it says "canceled". I click the circular arrow (or right click and select "retry"), and the file then shows as downloading in the Firefox download window. But then if I right click on it, the option to open the file or the folder containing it is greyed out, and, if I go to Windows Explorer to look for the file in the folder where it was supposed to be saved, it is not there. (I checked the download help topics and couldn't find an answer to this problem.)

Hi Frustratedannon!
I completely understand your frustration regarding these issues. Allow me to suggest a couple of things that may help lessen your frustration and resolve some issues. First, you should look to see if you have Automatic Downloads activated on your iPad (it could explain why the Simpsons game would have showed up on your iPad out of the blue):
iTunes Store: How to enable Automatic Downloads
http://support.apple.com/kb/ht4539
In order to actually get rid of the Simpsons app or finish downloading it, you may need to try turning off your iPad, then turning it back on. You also may need to try a reset, which is a simple power cycle procedure that does not affect your data on your iPad. Both of these steps are explained in the following article:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
Take care, and thanks for visiting the Apple Support Communities.
-Braden

So I tried the creating a new profile and all that, didn't help. Firefox still shows up on the process window, but wont open

So I've uninstalled it, reinstalled it, rebooted my computer, troubleshooted, ended the process and all the combinations of those. I created a new profile, since my settings may have been corrupted and followed the steps, and nothing. I've restored to a previous date, everything. Nothing works. It shows the process is running, but nothing show's up. I tweaked with the compatibility to see what would happen and chose to run it in 640x480 and it apparently worked, but it comes up invisible? I've asked people for help, but all they've done is called me a noob and told me to switch off to google chrome. If someone can help, I'd greatly appreciate it.
Also, I'm currently running Windows 7 starter for an OS.
== This happened ==
Every time Firefox opened
== My battery died and I rebooted. ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4

Your issue may be caused by Malware. You can run and update the following '''free''' anti virus software:
1. Malwarebytes (Free version) - http://www.malwarebytes.org
2. Spybot Search & Destroy - http://www.safer-networking.org
3.Spyware Terminator - http://www.spywareterminator.com
In addition, there are a number of forums you can use to help get rid of your infection. These include:
*http://www.bleepingcomputer.com/forums/
*http://forums.spybot.info/
*http://www.spywarewarrior.com/index.php .
Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]] Try [[Safe Mode]]

No mailboxes show up in the Mailbox window

Similar Messages

Maybe you are looking for