No Mapping Program Found...

Hi Experts,
I am getting an error "Error: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIServer:NO_MAPPINGPROGRAM_FOUND:" when i checked my sender communication channel.
I checked the SXI_CACHE and found the right operation mapping is there. I also checked the receiver communication channel and found the message "Message processing completed successfully".
When i visited the output directory i found the output file with proper structure.
To make it sure that the runtime is calling the right mapping program I changed the mapping program and activate it again. After doing this i again checked the output directory and found a file with proper values according to the changed mapping program.
When i checked my sender communication channel the same error appears again.
Now I am unable to understand that if runtime is unable to find out the mapping program then how a output message has been generated with proper values ?
Please note that my service interfaces are set to 'Asynchronous' mode.
Could any of you please tell me what is going on under the cover?
Thanks.

Hi
Please note the graphichal user ID of mapping and operation mapping visible below history option and then delete both and create new one you will see a new GUID .
make a full cache refresh and run the message again .
I hope it will work
Regards
Ninad

Similar Messages

No mapping program found - scenario soap to file

Hi all,
I'm developing a PI scenario Soap to file and I have a following problem.
My source is a third party System and my target is a ECC 6.0.
I have created two data type, only different in one value.
When tried to check my scenario, I obtain this error:
<code>ADAPTER.JAVA_EXCEPTION</code>
        <text><![CDATA[
                com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIServer:NO_MAPPINGPROGRAM_FOUND:
                at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:1214)
                at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
                at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
                at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
                at java.lang.reflect.Method.invoke(Method.java:592)
                </text>
I have checked my message in the SXI_MONITOR's transaction and i see in column "Detail state", the next information:
"Mapping: Error in Resource Resolution or Initialization"
When i enter in my Error log, i can see the next information:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">NO_MAPPINGPROGRAM_FOUND</SAP:Code>
<SAP:P1>Object ID 7FD3FFAD6DBD3BAC9E91883B24CAF1CA Software Component 47B2EEC1B0F111DF8A0CF473AC1D633C</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Mapping program is not available in runtime cache: Object ID 7FD3FFAD6DBD3BAC9E91883B24CAF1CA Software Component 47B2EEC1B0F111DF8A0CF473AC1D633C</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
i need some file transformation in SOAP-FILE scenario?
It may be that have a mistake in my develop?
Could you help me please?
Thanks & Best Reggards.

Hi Monica,,
The issue might be related to cache, please run the full cache refresh. also check the sap note1312182.
regards,
Harish

Interface Mapping Not Found in Integration Directory

Hey guys!
I'am getting this error in the test configuration part of the integration directory:
"Interface Mapping: <Not Found> com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping"
I don't see why I should be getting this error since I have properly defined a message and interface mapping for the receiving interface.
BTW, I get this error when I use XSLT mapping. If I point my interface mapping to a normal message mapping, I get no error. Is there anything I am missing?
Regards,
Glenn

The weird thing is that when I test the the configuration in the Integration Directory, it is still looking for my old message mapping (the one i created using xi editor) even though I already replaced the referenced message mapping in the interface mapping to the XSL one.
Yes, I tested the interface mapping with the same data using the XSL mapping and there's no problem.
When I send the message though, I get an error saying "NO_RECEIVER_CASE_ASYNC" I really don't see why it should not recognize the receiver. I tried refreshing the cache but it still looks for my old mapping program...
:P

Mapping Programs

Hi Expets,
We know that there are different mapping programs are available in XI environment like Graphical Mapping, Java Mapping, ABAP Mapping and XSLT Mapping. But on what basis we will choose one of these mapping programs?
I mean, which constraints would make me to choose specific mapping program?
Thanks,
Vijay Kumar T.

Hi Vijay,
This is a very good question!!!
We need to decide mapping based on performance ,response time and complexity.It is found that, one should try Graphical mapping first, and if its not possible by this,then go for other mappings.
see here for more detalis of mapping
/people/udo.martens/blog/2006/08/23/comparing-performance-of-mapping-programs
At what situations we will go for ABAP mapping?
See these threads of similer discussion
ABAP Mapping
when we wil go for abap mapping ??
abap mapping
ABAP Mapping
A few example cases in which an XSLT mapping can be used:-
When the required output is other than XML like Text, Html or XHTML (html displayed as XML)
When default namespace coming from graphical mapping is not required or is to be changed as per requirements.
When data is to be filtered based on certain fields (considering File as source)
When data is to be sorted based on certain field (considering File as source)
When data is to be grouped based on certain field (considering File as source)
Advantages of using XSLT mapping
XSLT program itself defines its own target structure.
XSLT programs can be imported into SAP XI. Message mapping step can be avoided. One can directly go for interface mapping once message interfaces are created and mapping is imported.
XSLT provides use of number of standard XPath functions that can replaces graphical mapping involving user defined java functions easily.
File content conversion at receiver side can be avoided in case of text or html output.
Multiple occurrences of node within tree (source XML) can be handled easily.
XSLT can be used in combination with graphical mapping.
Multi-mapping is also possible using xslt.
XSLT can be used with ABAP and JAVA Extensions.
Disadvantages of using XSLT mapping
Resultant XML payload can not be viewed in SXMB_MONI if not in XML format (for service packs < SP14).
Interface mapping testing does not show proper error description. So errors in XSLT programs are difficult to trace in XI but can be easily identified outside XI using browser.
XSLT mapping requires more memory than mapping classes generated in Java.
XSLT program become lengthier as source structure fields grows in numbers.
XSLT program sometimes become complex to meet desired functionality.
Some XSL functions are dependent on version of browser.
see these also .. u might need this some day!!
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01a57f0b-0501-0010-3ca9-d2ea3bb983c1
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9692eb84-0601-0010-5ca0-923b4fb8674a
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/006aa890-0201-0010-1eb1-afc5cbae3f15
Some scenarios
/people/sap.user72/blog/2005/03/15/using-xslt-mapping-in-a-ccbpm-scenario
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
JAVA mapping
How is JAVA mapping different from Graphical, XSLT and ABAP mapping?
Graphical mapping is an easiest and common approach followed by everyone for generating desired target structure. It involves simple drag-n-drop to correlate respective nodes (fields) from source and target structure. It may involve Java UDFs as a part of the mapping program. But sometimes with graphical mapping it is difficult or it may seem impossible to produce required output; for example text/html output, namespace change, sorting or grouping of records etc. A person comfortable with Object Oriented ABAP can go for ABAP mapping instead. One can also think of XSLT mapping as another option. In such cases, when java mapping is used the developer has full control over the message content and could manipulate it based on the output requirement. Hence, java mapping can prove to be an efficient approach.
A few example cases in which Java mapping can be used:-
     When the required output is other than XML like Text, Html or XHTML (html displayed as XML).
     When the data is to be extracted from input which is in text format.
     When default namespace coming from graphical mapping is not required or is to be changed as per requirements.
     When data is to be filtered, sorted or grouped based on certain fields (considering File as source)
Advantages of using Java mapping
     Java program itself defines its own target structure.
     File content conversion at sender side can be avoided in case of text or html input.
     File content conversion at receiver side can be avoided in case of text or html output.
     Java can be used in combination with graphical mapping.
     Multi-mapping is also possible using Java mapping.
     Using Mapping Runtime constants we can determine all message related information such as Message ID, sender service etc.
     Disadvantages of using Java mapping
     Once the java mapping has been imported into XI, to incorporate any further changes one has to compile the java program and import the class file again into XI.
Thanqs
Biplab

One mapping program for three diferent enviroments

Hello there,
I have developed a scenario in which an rfc requests a web service trough XI. In the process a BPM is involved together with some XSLT mappings.
     R3->XI->WebService
The Web service request message looks like follows:
<?xml version="1.0" encoding="UTF-8"?>
<cem:Z_ORDER_SEARCH xmlns:cem="http://XXXXXXXX/yyyyyyyyyyyy">
     <messageStructure/>
</cem:Z_ORDER_SEARCH>
Where "http://XXXXXXXX/yyyyyyyyyyyy" Is the web service destination.
Everything works fine, but as I have to manage three different environments for Development, Quality and Production I need three different versions of the XSL mapping since destinations are not the same for Dev, Qlty and Production environments.
I found out that I can get information of the sender using runtime parameters as follows:
<xsl:param name="SenderSystem">
I would like to evaluate this information to determine the target URL destination.
If the sender is the development sender then the URL target is the development destination and so on.
I tried the following code:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:fo="http://www.w3.org/1999/XSL/Format"
xmlns:cemDev="http://developmentDestination"
xmlns:cemQlty="http://qualityDestination"
xmlns:cemPrd="http://productionDestination"
xmlns:cem=""
<xsl:namespace-alias stylesheet-prefix="cem" result-prefix="cemDev"/>
<xsl:template match="/">
     <cem:mappingProgram/>
</xsl:template>
</xsl:stylesheet>
This works all right, but I cannot insert code to evaluate the destination.
On the other hand, this code is not valid:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:fo="http://www.w3.org/1999/XSL/Format"
xmlns:cemDev="http://developmentDestination"
xmlns:cemQlty="http://qualityDestination"
xmlns:cemPrd="http://productionDestination"
xmlns:cem="">
<xsl:param name="SenderSystem"/>
     <xsl:choose>
          <xsl:when test="string($SenderSystem) = 'PRODUCTION'">
               <xsl:namespace-alias stylesheet-prefix="cem" result-prefix="cemPrd"/>
          </xsl:when>
          <xsl:when test="string($SenderSystem) = 'QUALITY'">
               <xsl:namespace-alias stylesheet-prefix="cem" result-prefix="cemQlty"/>
          </xsl:when>
          <xsl:otherwise>
               <xsl:namespace-alias stylesheet-prefix="cem" result-prefix="cemDev"/>
          </xsl:otherwise>
     </xsl:choose>
     <xsl:template match="/">
          <cem:mappingProgram/>
     </xsl:template>
</xsl:stylesheet>
Neither this one:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:fo="http://www.w3.org/1999/XSL/Format"
xmlns:cemDev="http://developmentDestination"
xmlns:cemQlty="http://qualityDestination"
xmlns:cemPrd="http://productionDestination"
xmlns:cem="">
        <xsl:param name="SenderSystem"/>
        <xsl:template match="/">
     <xsl:choose>
          <xsl:when test="string($SenderSystem) = 'PRODUCTION'">
               <xsl:namespace-alias stylesheet-prefix="cem" result-prefix="cemPrd"/>
          </xsl:when>
          <xsl:when test="string($SenderSystem) = 'QUALITY'">
               <xsl:namespace-alias stylesheet-prefix="cem" result-prefix="cemQlty"/>
          </xsl:when>
          <xsl:otherwise>
               <xsl:namespace-alias stylesheet-prefix="cem" result-prefix="cemDev"/>
          </xsl:otherwise>
     </xsl:choose>
     <cem:mappingProgram/>
      </xsl:template>
</xsl:stylesheet>
I tried this other code, which is obviously not valid:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
     <xsl:template match="/">
          <xsl:param name="SenderSystem"/>
          <xsl:choose>
               <xsl:when test="string($SenderSystem) = 'PRODUCTION'">
                    <cem:Z_ORDER_SEARCH xmlns:cem="http://productionDestination">
               </xsl:when>
               <xsl:when test="string($SenderSystem) = 'QUALITY'">
                    <cem:Z_ORDER_SEARCH xmlns:cem="http://qualityDestination">
               </xsl:when>
               <xsl:otherwise>
                    <cem:Z_ORDER_SEARCH xmlns:cem="http://developmentDestination">
               </xsl:otherwise>
          </xsl:choose>
     <cem:mappingProgram/>
</cem:Z_ORDER_SEARCH>
     </xsl:template>
</xsl:stylesheet>
So the only way I found to make it works is like this:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
     <xsl:template match="/">
          <xsl:param name="SenderSystem"/>
          <xsl:choose>
               <xsl:when test="string($SenderSystem) = 'PRODUCTION'">
                    <cem:Z_ORDER_SEARCH xmlns:cem="http://productionDestination">
     <cem:mappingProgram/>
                    </cem:Z_ORDER_SEARCH>
               </xsl:when>
               <xsl:when test="string($SenderSystem) = 'QUALITY'">
                    <cem:Z_ORDER_SEARCH xmlns:cem="http://qualityDestination">
     <cem:mappingProgram/>
                    </cem:Z_ORDER_SEARCH>
               </xsl:when>
               <xsl:otherwise>
                    <cem:Z_ORDER_SEARCH xmlns:cem="http://developmentDestination">
     <cem:mappingProgram/>
                    </cem:Z_ORDER_SEARCH>
               </xsl:otherwise>
          </xsl:choose>
     </xsl:template>
</xsl:stylesheet>
Unfortunately this doesnt solve my problem, because I need to reproduce the mapping program three times in the document.
Any ideas, or suggestions how to manage one mapping program for the three different environments?
Thanks a lot in advance, Raú

Hi there,
I just found one way of getting this done. It may not be the better waw, but I post it in case it is helpfull.
<?xml version="1.0" encoding="utf-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:fo="http://www.w3.org/1999/XSL/Format">
     
     <xsl:param name="senderSystem"/>
     
     <xsl:variable name="qualitySenderSystem" select="'WHATEVERTHENAMEOFTHEQUALITYSENDERSYSTEM'"/>
     <xsl:variable name="productionSenderSystem" select="'WHATEVERTHENAMEOFTHEPRODUCTIONSENDERSYSTEM'"/>
     
     <xsl:template name="mappingProgram" match="/">
          
          <UNIQUE_MAPPING_PROGRAM/>
          
     </xsl:template>
     <!Receiver determination depending on senderSystem>
     <xsl:template match="/">
          <xsl:choose>
               <xsl:when test="$senderSystem=$productionSenderSystem">
                    <xxx:Z_ORDER_SEARCH xmlns:xxx="http://production">
                         <xsl:call-template name="mappingProgram"/>
                    </xxx:Z_ORDER_SEARCH>
               </xsl:when>
               <xsl:when test="$senderSystem=$qualitySenderSystem">
                    <xxx:Z_ORDER_SEARCH xmlns:xxx="http://quality">
                         <xsl:call-template name="mappingProgram"/>
                    </xxx:Z_ORDER_SEARCH>
               </xsl:when>
               <xsl:otherwise>
                    <xxx:Z_ORDER_SEARCH xmlns:xxx="http://development">
                         <xsl:call-template name="mappingProgram"/>
                    </xxx:Z_ORDER_SEARCH>
               </xsl:otherwise>
          </xsl:choose>
     </xsl:template>
</xsl:stylesheet>

BPM Error in Transformation Step: Interface Mapping not found

Hi,
Can you help me on this? I have a tranformation step in my BPM that combines a request and response message of a previous Send step to create a Source message for the next Send step. However, on my transformation step, I got the mapping error in workflow log: Interface mapping http://gl.euhreka.com/learning/skillsoft/catalogSy.YGLXI_OM_MergeRequestAndHandleResponseAB_To_PollFo (SWCV=DF8549309ECE11DFB58DF3570A341E0F) not found
Do you have any idea about this error? My mapping program is working fine. I also checked if the container elements assigned to the transformation steps are correct.
Can you suggest of other way on how can I achieve on merging 2 messages (request and response) and set it to the Request for another send step?
Thanks,
Jenny

Hello,
I already solved the problem. The namespace and Operation mapping name is too long that's why it cannot be located at runtime.
After the rename, another error appeared.
"Incorrect XML format after mapping: Root-Tag expected instead of Messages"
There are no useful information on the trace:
<?xml version="1.0" encoding="utf-8" ?>
- <MappingTrace>
<Trace level="1" type="T">Mapping http://test YGLXI_OM_Merge , Software Component Version DF8549309ECE11DFB58DF3570A341E0F</Trace>
<Trace level="1" type="T">Mapping Step 1 , Type XSLT , Program PollForReport_Merge</Trace>
<Trace level="2" type="T">Call XSLT processor with stylsheet PollForReport_Merge.xsl.</Trace>
<Trace level="2" type="T">Returned form XSLT processor.</Trace>
</MappingTrace>
Here is myXSLT program:
<?xml version='1.0' encoding='utf-8' ?>
<xsl:stylesheet version="2.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" >
     <xsl:template match="/">
          <YGLXI_MT_PollForReportRequest>
               <customerID>
                    <xsl:value-of select="//customerID"/>
               </customerID>
               <customerPassword>
                    <xsl:value-of select="//customerPassword"/>
               </customerPassword>
               <reportIDHandle>
                    <xsl:value-of select="//reportHandle"/>
               </reportIDHandle>
          </YGLXI_MT_PollForReportRequest>
     </xsl:template>
Here is my source message:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
   <ns0:Message1>
      <ns1:YGLXI_MT_InitiateFullCourseListingRequest xmlns:ns1="http://gl.euhreka.com/learning/skillsoft/catalogSynchronization">
         <customerID>ZZZ</customerID>
         <customerPassword>XXX</customerPassword>
         <reportFormat>VVV</reportFormat>
         <mode>VCC</mode>
         <userName>CC</userName>
      </ns1:YGLXI_MT_InitiateFullCourseListingRequest>
   </ns0:Message1>
   <ns0:Message2>
      <ns1:YGLXI_MT_InitiateFullCourseListingResponse xmlns:ns1="http://gl.euhreka.com/learning/skillsoft/catalogSynchronization">
         <reportHandle>SADA</reportHandle>
      </ns1:YGLXI_MT_InitiateFullCourseListingResponse>
   </ns0:Message2>
</ns0:Messages>
I tested my program in Operation mapping and it is working. How come it is not in BPM?
Thanks,
Jenny

XI Mapping Programs Using Java

Hello all. This is my first posting, hopefully it's not a stupid question. Basically I'm having terrible problems trying to build a mapping program in NWDS. I can't seem to find the mapping jar file which contains the interface I need to implement in my java class. Actually, I'm not even sure which interface to implement, there's conflicting versions. I'm on the NW PI 7.1 version.
So far I've had someone look for aii_map_api.jar on the server which is supposed to contain a StreamTransormation interface which I can implement. That was not successful. I also tried looking on the sap marketplace for this jar file, but finding something out there is like finding a needle in a haystack. So no luck on that front.
After that I found another help article here : http://help.sap.com/saphelp_nwpi71/helpdata/EN/bd/c91241c738f423e10000000a155106/content.htm indicating that the jar files for mapping should already be installed in NWDS. Unfortunately my install does not have the SAP_XIAF folder. So now I'm stuck and I'm hoping someone here can point me in the right direction.
Do I need to get a different install of NWDS? If so what version?
Can I just download some jar files from the server or the marketplace? If so, which files?
Thanks very much,
Kevin

Kevin,
There are few options to get them. They already discussed in this thread:
aii_map_api.jar
http://wiki.sdn.sap.com/wiki/display/XI/Where%20to%20get%20the%20libraries%20for%20XI%20development
If you dont have the options to get these let me know ur id so that somebody can send them to you.
Regards,
---Satish

N810 map program fails on start

I flashed my N810 to the latest OS version today. I started the map program, but I got a "no memory card found" error, although File Manager showed both my internal memory card, and my 2Gb external, empty, SD card. This is better than in the past, when it used to crash with no explanation.
I googled for answers and I found suggestions to remove the "map" folder on the internal card, but when I tried to do that, the system told me it is a read-only folder.
I tried the "Contact us" link on the Nokia support website ( http://www.nokiausa.com/A4410063 ), selected the subject of inquiry as "Maps", got pointed to https://www.nokiausa.com/A4686840 , clicked on "Support, and got into a dead-end page of pre-canned answers that did not address my problem. So much for "Contact".
The GPS and maps were a big part of the reason why I bought the N810 (my first Nokia product), but they never worked. This is really disappointing. Now I am going on vacation and I was really hoping I could use the GPS and maps. Can anyone please help me?
Thank you,
I. Vlad
Solved!
Go to Solution.

Thank you! It worked. To summarize the long thread in the link above, here is what I did:
1. Enabled Extras
2. Installed rootsh, from: Application Manager... Browse Installable applications... All
3. Open terminal, then typed:
root
lsof /media/mmc2
Nothing was listed as using the internal card. From that point on I followed these instructions . I did:
umount /media/mmc2
sfdisk /dev/mmcblk0
Then I was asked for cylinder sizes for each partition (4 partitions). So for the first one, I typed in 0,,b all on the same line (ex. /dev/mmcblk0p1:0,,b ), then for the next 3 I just hit enter and put nothing in.
I rebooted the device, went to file manager, clicked and held on "Internal Memory" and then I clicked format.
Thanks again!

N82 and BEST GPS/MAP program?

hello all,
just wanting some opinions on the best gps/map program to use on the N82? Google Maps, Nokia Maps, Tom Tom?
Have been found it taking long to "locate position" when using the 82?
Thanks for the advice!!
cs.

Try the new Nokia Maps 2.0 Beta (and new maploader) that were released to the public today. It's a massive improvement on the old version. So far i've been able to get a lock in half the time of the old version.
http://www.nokia.com/betalabs/maps

TS1702 Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a

Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a blur.

Do you have a question? This is a user to user help forum. Apple is not here only other users like yourself. You don't report problems to Apple here.
By the way, it might help if you indicated where you are located.
To complain to Apple use http://www.apple.com/feedback/ipad.html

Do you have any plans to add user polygon (boundary) creation ability to your great Excel Power Map program ?

Hi Microsoft Excel Power Map program team!
I looked @ your Excel Power Map program add on, and it’s great.
However everyone is looking for the ability for the user to create polygon (boundary) maps.
It should not be that hard to add this functionality onto such a great map program you already have.
For example: let’s say one has 10 latitude & longitude coordinates and he wants to see the polygon (boundary) of them on your great map. One should be able to just put those 10 latitude & longitude coordinates in an Excel sheet, fire up your Power
Map, select that it should be plotted as a polygon (boundary) and it will display on the map.
Does Microsoft have any plans to add user polygon (boundary) map creation ability to your great Excel Power Map program?
I would also like to see Excel Power map have USA census tracts built into it just like is has USA zip codes built into it. Census data is also very important as thousands and thousands of people need to display polygon (boundary) for census tracts.
Please let me know if Microsoft has any plans to add user polygon (boundary) creation ability to its great Excel Power Map program?
Thank you very much!

Hi,
Thanks for your feedback, based on your feature required, I'll move your thread to Power Map forum, there might be give us some light.
https://social.technet.microsoft.com/Forums/en-US/home?forum=powermap&filter=alltypes&sort=lastpostdesc
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

ABAP MAPPING PROGRAM TRANSPORTATION ISSUE

Hi Experts,
Our issue is as following:
Already one ABAP mapping program is there in our DEV and in QA also.
Now we have changes the code according to some requirement.
Now we need to reflect the same in QA also.
For that I have certain doubts.
1) after releasing the request number in R/3, will it effect there in integration builder of the QA?
2) Is there any need to do in ADMINISTRATION to reflect the same?
Please revert urgenly.
Regards
sreeni

hi barry,
thanks a lot . we have released it into integration it is working fine.
thanks once again and i wll reward points also.
I think you can tell my one more doubt is as:
I have one new ABAP mapping program which is not used till now in any interface mapping in ID of XI.
now want use this my integration builder ID in as mapping program.
in this case is any requirement to enable the same in Integration ADMINISTRATION tab.
plz clarify me.
regards
sreeni

XI 3.0: Additional libraries for mapping program

Hello,
I got the scenario that the program within my Interface Mapping is making use of additional custom java resources (jar's).
I know that in XI 2.0 I had to put these additional libraries into the directory:
..\j2ee\cluster\server\additional-lib
and register them in the files:
..\j2ee\cluster\server\managers\library.txt and
..\j2ee\cluster\server\managers\reference.txt
Now in XI 3.0 I don't have these folders and files anymore. Therefore I simply imported the jar files into the repository...But I do neiter know wether that is the right way at all for registering additional libs in XI 3.0 nor I don't know if I have to import them into the same software component or namespace then the mapping program.
Does anybody know how to make use of additional libraries within a XI 3.0 Stack 5 landscape? I would very much appreciate any recommendations on that!
Kind regards,
Sven Lattermann

Hi Advait,
From the below what I understand is that you are not able to do value mapping for the follwoing
1     A
2     A
3     B
As value mapping allow one to one mapping only. Please do it like as mentioned below
1     1*A
2     2*A
3     3*B
Then in the graphical mapping of Integration Repository do the mapping for the same as shown below
source field > VALUEMAPPING> UDF--> TARGET Field
In UDF suppress the value of 1* , 2* , 3* which can be done as follows
create one UDF with one input field
//write the code as below to suppress the field
return input.substring(2);
Here the davantage of using 1* , 2* , 3* etc is that you have the option to use value mapping for 100 values which I think is not normally the case for any Interface.
If you have same source you can do the same thing for that.
Hope this helps you to resolve your query.
Thanks & Regards
Prabhat

Error in Java Mapping program

Hi friends,
I am tryin java mapping for first time.. and created one java program using link https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/wholePayloadtoaXML+field
But when I am compiling it using JAVAC, I am getting following error message that
package com.sap.aii.mapping.api does not exist . How can I solve this error.
Complete error is as follows:
C:j2sdk1.4.2_16-x64 in>javac PayloadToXMLField.java
PayloadToXMLField.java:1: package com.sap.aii.mapping.api does not exist
import com.sap.aii.mapping.api.StreamTransformation;
                               ^
PayloadToXMLField.java:2: package com.sap.aii.mapping.api does not exist
import com.sap.aii.mapping.api.AbstractTrace;
                               ^
PayloadToXMLField.java:3: package com.sap.aii.mapping.api does not exist
import com.sap.aii.mapping.api.StreamTransformationConstants;
                               ^
PayloadToXMLField.java:8: cannot resolve symbol
symbol : class StreamTransformation
location: class PayloadToXMLField
public class PayloadToXMLField implements StreamTransformation {
                                          ^
PayloadToXMLField.java:16: cannot resolve symbol
symbol : class AbstractTrace
location: class PayloadToXMLField
    AbstractTrace trace;
    ^
PayloadToXMLField.java:27: cannot resolve symbol
symbol : class AbstractTrace
location: class PayloadToXMLField
            (AbstractTrace) param.get(
             ^
PayloadToXMLField.java:28: cannot resolve symbol
symbol : variable StreamTransformationConstants
location: class PayloadToXMLField
                StreamTransformationConstants.MAPPING_TRACE);
                ^
PayloadToXMLField.java:43: cannot resolve symbol
symbol : variable outputPayload
location: class PayloadToXMLField
        outputPayload =
        ^
PayloadToXMLField.java:50: cannot resolve symbol
symbol : variable outputPayload
location: class PayloadToXMLField
            out.write(outputPayload.getBytes());
                      ^
9 errors
Thanks,
Brijesh Soni

thanks , it is done now..
the program is compiled properly and class file is generated.
but m gettin error in mapping.
in IR i created two message type with data type as string.
and i had imported the class file and java program using Imported archives.
now in interface mapping mapping program i had selected type as Java Class.and name of java program.
but when i tested it, it is giving error as Linkage error occurred when loading class zip/PayloadToXMLField
Please suggest, M i doing some thing wrong?is any thing missing?
Program tht i had used in java
from link (https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/wholePayloadtoaXML+field):
import com.sap.aii.mapping.api.StreamTransformation;
import com.sap.aii.mapping.api.AbstractTrace;
import com.sap.aii.mapping.api.StreamTransformationConstants;
import java.util.Map;
import java.io.*;
public class PayloadToXMLField implements StreamTransformation {
    String strXML = new String();
    String outputPayload = new String();
     //Declare the XML tag for your XML message
     String StartXMLTag = "<Payload>";
     String EndXMLTag = "</Payload>";
    AbstractTrace trace;
    private Map param = null;
    public void setParameter(Map param) {
        this.param = param;
    public void execute(InputStream in, OutputStream out) {
        trace =
            (AbstractTrace) param.get(
                StreamTransformationConstants.MAPPING_TRACE);
        trace.addInfo("Process Started");
        try {
            StringBuffer strbuffer = new StringBuffer();
            byte[] b = new byte[4096];
            for (int n;(n = in.read(b)) != -1;) {
                strbuffer.append(new String(b, 0, n));
            strXML = strbuffer.toString();
        } catch (Exception e) {
            System.out.println("Exception Occurred");
        outputPayload =
            "<?xml version="1.0" encoding="UTF-8"?>"
               + StartXMLTag
               + strXML
               + EndXMLTag;
        try {
            out.write(outputPayload.getBytes());
               trace.addInfo("Process Completed");;
        } catch (Exception e) {
            trace.addInfo("Process Terminated: Error in writing out payload");;
and detailed trace of error is:
11:34:21 Start of test
LinkageError at JavaMapping.load(): Could not load class: zip/PayloadToXMLField
java.lang.NoClassDefFoundError: zip/PayloadToXMLField (wrong name: PayloadToXMLField) at java.lang.ClassLoader.defineClass0(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java:539) at java.lang.ClassLoader.defineClass(ClassLoader.java:448) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingLoader.findClass(RepMappingLoader.java:175) at java.lang.ClassLoader.loadClass(ClassLoader.java:289) at java.lang.ClassLoader.loadClass(ClassLoader.java:235) at com.sap.aii.ibrep.server.mapping.ibrun.RepJavaMapping.load(RepJavaMapping.java:136) at com.sap.aii.ibrep.server.mapping.ibrun.RepJavaMapping.execute(RepJavaMapping.java:50) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127) at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0.transform(MapServiceRemoteObjectImpl0_0.java:167) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0p4_Skel.dispatch(MapServiceRemoteObjectImpl0_0p4_Skel.java:104) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:319) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:200) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
11:34:21 End of test

Error Interface Mapping Not found..

Hi Friends,
I am simply using file to ABAP proxy scenario.
I am getting error as : This I am getting while test my configuration at Scenario level Tools - > Test Configuration..
Interface Mapping :
Runtime error
com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_Source_Target_Proxy_: Parsing an empty source. Root element expected!
Plz help.
Regard
Deepak Sodhi

Hi Rajesh,
I am keeping the file as it is from Meassage mapping SRC File..
Message Mapping is giving me no error..
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Source_Proxy xmlns:ns0="https://tcsfenest/test">
   <EmpId>315143</EmpId>
   <EmpName>Deepak Sodhi</EmpName>
   <EmpOffc>Gurgaon</EmpOffc>
</ns0:MT_Source_Proxy>
Only at the time of Testing configuration Environment -> Test Scenario.
Its giving me error Interface mapping not found.. My strucuture is flat.
DT - Complex type
Empid element string
Empname element string
Empoffc element string
Please help to resolove this issue.
Regards
depak

No Mapping Program Found...

Similar Messages

Maybe you are looking for